lkml.org 
[lkml]   [2010]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] MMC:mmc_spi: Recover from CRC error for SD read/write operation over SPI.
Date
From: Sonic Zhang <sonic.zhang@analog.com>

SPI bus is not reliable on all platforms when doing large data transfer.
Current mmc spi driver fails SD read/write command immediately, if
occasional CRC error is reported by SD device. This patch makes the
operation recover from the CRC error by doing last SD command again.
The retry count is set to 5 to ensure the driver pass any stress test.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
[cjb: fixed merge conflict against current Linus]
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
Andrew: we posted this months ago with no feedback ... could you pick it up ?

drivers/mmc/host/mmc_spi.c | 22 ++++++++++++++++++++++
1 files changed, 22 insertions(+), 0 deletions(-)

diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 62a3582..fbd673e 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1055,6 +1055,8 @@ static void mmc_spi_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct mmc_spi_host *host = mmc_priv(mmc);
int status = -EINVAL;
+ int crc_retry = 5;
+ struct mmc_command stop;

#ifdef DEBUG
/* MMC core and layered drivers *MUST* issue SPI-aware commands */
@@ -1087,10 +1089,30 @@ static void mmc_spi_request(struct mmc_host *mmc, struct mmc_request *mrq)
/* request exclusive bus access */
spi_bus_lock(host->spi->master);

+ crc_recover:
/* issue command; then optionally data and stop */
status = mmc_spi_command_send(host, mrq, mrq->cmd, mrq->data != NULL);
if (status == 0 && mrq->data) {
mmc_spi_data_do(host, mrq->cmd, mrq->data, mrq->data->blksz);
+
+ /*
+ * SPI bus is not reliable when doing large data transfer.
+ * If occasional crc error is reported by SD device when do
+ * data read/write over SPI, it can be recovered by doing
+ * last SD command again. The retry count is set to 5 to
+ * ensure the driver pass any stress test.
+ */
+ if (mrq->data->error == -EILSEQ && crc_retry) {
+ stop.opcode = MMC_STOP_TRANSMISSION;
+ stop.arg = 0;
+ stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
+
+ status = mmc_spi_command_send(host, mrq, &stop, 0);
+ crc_retry--;
+ mrq->data->error = 0;
+ goto crc_recover;
+ }
+
if (mrq->stop)
status = mmc_spi_command_send(host, mrq, mrq->stop, 0);
else
--
1.7.3.1


\
 
 \ /
  Last update: 2010-10-16 23:23    [W:0.085 / U:1.276 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site