lkml.org 
[lkml]   [2010]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.33-rc3 regression: leds_alix2: can't allocate I/O for GPIO
Arnd Hannemann schrieb:
> Richard Purdie schrieb:
>> On Thu, 2010-01-07 at 11:26 +0100, Arnd Hannemann wrote:
>>> with 2.6.33-rc3 the LEDs are not working anymore on my Geode embedded board:
>>> If I remember correctly this was working fine with 2.6.32, but certainly with 2.6.31
>>>
>>> relevant dmesg output of 2.6.33-rc3:
>>>
>>> [ 0.709643] cs5535_gpio: base=0x6100 mask=0xb003c66 major=253
>>>
>>> [ 2.207947] leds_alix2: system is recognized as "PC Engines ALIX.2 v0.99h"
>>> [ 2.228678] leds_alix2: can't allocate I/O for GPIO
>>>
>>>
>>> For reference dmesg of 2.6.31.3:
>>>
>>> [ 0.611953] cs5535_gpio: base=0x6100 mask=0xb003c66 major=253
>>>
>>> [ 2.379114] leds_alix2: system is recognized as "PC Engines ALIX.2"
>>> [ 2.399097] Registered led device: alix:1
>>> [ 2.411404] Registered led device: alix:2
>>> [ 2.423720] Registered led device: alix:3
>> Its likely to be commit 7f131cf3ed96c969d7b092bf629e25c3df50901e. It
>> looks like the request_region() call is failing. Daniel, any idea why?
>
> Some additional debug information:
>
> elara:~# rdmsr 0x5140000C
> f00100006100
>
> /proc/ioports says:
> 6100-61ff : 0000:00:0f.0
> 6100-61ff : cs5535_gpio
>
> BTW: why is request_region() needed there after all?

Oh, maybe using cs5535_gpio AND leds_alix2 together was never supposed to work?

Best regards,
Arnd


\
 
 \ /
  Last update: 2010-01-07 13:13    [W:0.067 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site