lkml.org 
[lkml]   [2010]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: Memory probing fails after 2.6.30 (bisected)
    Date
    From

    yinghai@kernel.org said:
    > whole boot log with debug with boot command line?
    >
    > > I can produce a pic of the dmesg for the fingered commit of needed.
    > boot that with earlyprintk=vga please.

    I managed to pull this one from the failing boot.
    Does it help?

    Linux version 2.6.30-rc2-00450-g8ecee46 (root@korven) (gcc version 4.3.2 (Gentoo 4.3.2-r3 p1.6, pie-10.1.5) ) #21 SMP Tue Jan 5 10:45:52 CET 2010
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    NSC Geode by NSC
    Cyrix CyrixInstead
    Centaur CentaurHauls
    Transmeta GenuineTMx86
    Transmeta TransmetaCPU
    UMC UMC UMC UMC
    BIOS-provided physical RAM map:
    BIOS-88: 0000000000000000 - 000000000009f000 (usable)
    BIOS-88: 0000000000100000 - 0000000001000000 (usable)
    console [earlyvga0] enabled
    DMI 2.4 present.
    last_pfn = 0x1000 max_arch_pfn = 0x100000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-CFFFF write-protect
    D0000-EFFFF uncachable
    F0000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask F80000000 write-back
    1 base F7F800000 mask FFF800000 uncachable
    2 base 0FEDA0000 mask FFFFE0000 uncachable
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    init_memory_mapping: 0000000000000000-0000000001000000
    0000000000 - 0000400000 page 4k
    0000400000 - 0001000000 page 2M
    kernel direct mapping tables up to 1000000 @ 7000-b000
    ACPI: RSDP 000f78b0 00024 (v02 HP )
    ACPI: XSDT 7f7e57c8 0007C (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
    ACPI: FACP 7f7e5684 000F4 (v04 HP 30AD 00000003 HP 00000001)
    ACPI: DSDT 7f7e5acc 0FE7B (v01 HP nc6400 00010000 MSFT 0100000E)
    ACPI: FACS 7f7f7e80 00040
    ACPI: SLIC 7f7e5844 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
    ACPI: HPET 7f7e59bc 00038 (v01 HP 30AD 00000001 HP 00000001)
    ACPI: APIC 7f7e59f4 00068 (v01 HP 30AD 00000001 HP 00000001)
    ACPI: MCFG 7f7e5a5c 0003C (v01 HP 30AD 00000001 HP 00000001)
    ACPI: TCPA 7f7e5a98 00032 (v02 HP 30AD 00000001 HP 00000001)
    ACPI: SSDT 7f7f5947 00059 (v01 HP HPQNLP 00000001 MSFT 0100000E)
    ACPI: SSDT 7f7f59a0 0032D (v01 HP HPQSAT 00000001 MSFT 0100000E)
    ACPI: SSDT 7f7f64e0 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317)
    ACPI: SSDT 7f7f673f 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317)
    ACPI: SSDT 7f7f67e5 004D7 (v01 HP CpuPm 00003000 INTL 20060317)
    ACPI: Local APIC address 0xfee00000
    0MB HIGHMEM available.
    16MB LOWMEM available.
    mapped low ram: 0 - 01000000
    low ram: 0 - 01000000
    node 0 low ram: 00000000 - 01000000
    node 0 bootmap 00002000 - 00002200
    (7 early reservations) ==> bootmem [0000000000 - 0001000000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0000100000 - 000079a2f8] TEXT DATA BSS ==> [0000100000 - 000079a2f8]
    #4 [000009ac00 - 0000100000] BIOS reserved ==> [000009ac00 - 0000100000]
    #5 [000079b000 - 000079e164] BRK ==> [000079b000 - 000079e164]
    #6 [0000002000 - 0000003000] BOOTMAP ==> [0000002000 - 0000003000]
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    Normal 0x00001000 -> 0x00001000
    HighMem 0x00001000 -> 0x00001000
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x00001000
    On node 0 totalpages: 3999
    free_area_init_node: node 0, pgdat c069a480, node_mem_map c000c000
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3967 pages, LIFO batch:0
    Using APIC driver default
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 000000000009f000 - 0000000000100000
    Allocating PCI resources starting at 10000000 (gap: 1000000:ff000000)
    NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 11 pages at c002d000, static data 22940 bytes
    Built 1 zonelists in Zone order, mobility grouping off. Total pages: 3967
    Kernel command line: earlyprintk=vga debug root=/dev/sda5 lpj=5546966 boot_delay=10 init=/bin/bash
    boot_delay: 10, preset_lpj: 5546966, lpj: 5546966, HZ: 300, printk_delay_msec: 1663800
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    NR_IRQS:320
    PID hash table entries: 64 (order: 6, 256 bytes)
    Extended CMOS year: 2000
    Fast TSC calibration using PIT
    Detected 1662.321 MHz processor.
    Console: colour VGA+ 80x25
    console handover: boot [earlyvga0] -> real [tty0]
    Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
    Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Initializing HighMem for node 0 (00000000:00000000)
    Memory: 8792k/16384k available (3710k kernel code, 7200k reserved, 2105k data, 324k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xc1800000 - 0xff7fe000 ( 991 MB)
    lowmem : 0xc0000000 - 0xc1000000 ( 16 MB)
    .init : 0xc06b8000 - 0xc0709000 ( 324 kB)
    .data : 0xc049f93b - 0xc06ae084 (2105 kB)
    .text : 0xc0100000 - 0xc049f93b (3710 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    hpet clockevent registered
    HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    Calibrating delay loop (skipped) preset value.. 3329.85 BogoMIPS (lpj=5546966)
    Mount-cache hash table entries: 512
    Initializing cgroup subsys ns
    Initializing cgroup subsys devices
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    using mwait in idle threads.
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20090320
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 02
    Booting processor 1 APIC 0x1 ip 0x6000
    Initializing CPU#1
    Calibrating delay loop (skipped) preset value.. 3329.85 BogoMIPS (lpj=5546966)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 02
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Total of 2 processors activated (6659.70 BogoMIPS).
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    net_namespace: 712 bytes
    HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
    xor: automatically using best checksumming function: pIII_sse
    pIII_sse : 6165.600 MB/sec
    xor: using function: pIII_sse (6165.600 MB/sec)
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
    PCI: Not using MMCONFIG.
    PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
    PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
    PCI: Using MMCONFIG for extended config space
    ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: Power Resource [C1EF] (on)
    ACPI: Power Resource [C1F6] (on)
    ACPI: Power Resource [C220] (on)
    ACPI: Power Resource [C228] (on)
    ACPI: Power Resource [C32D] (off)
    ACPI: Power Resource [C32E] (off)
    ACPI: Power Resource [C32F] (off)
    ACPI: Power Resource [C330] (off)
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [C002] (0000:00)
    pci 0000:00:02.0: reg 10 32bit mmio: [0xf4600000-0xf467ffff]
    pci 0000:00:02.0: reg 14 io port: [0x4000-0x4007]
    pci 0000:00:02.0: reg 18 32bit mmio: [0xe0000000-0xefffffff]
    pci 0000:00:02.0: reg 1c 32bit mmio: [0xf4680000-0xf46bffff]
    pci 0000:00:02.1: reg 10 32bit mmio: [0xf4700000-0xf477ffff]
    pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4780000-0xf4783fff]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.3: PME# disabled
    pci 0000:00:1d.0: reg 20 io port: [0x4020-0x403f]
    pci 0000:00:1d.1: reg 20 io port: [0x4040-0x405f]
    pci 0000:00:1d.2: reg 20 io port: [0x4060-0x407f]
    pci 0000:00:1d.3: reg 20 io port: [0x4080-0x409f]
    pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4784000-0xf47843ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
    pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
    pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0100 (mask 000f)
    pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0238 (mask 0007)
    pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
    pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
    pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
    pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
    pci 0000:00:1f.1: reg 20 io port: [0x40a0-0x40af]
    pci 0000:00:1f.2: reg 10 io port: [0x13f0-0x13f7]
    pci 0000:00:1f.2: reg 14 io port: [0x15f4-0x15f7]
    pci 0000:00:1f.2: reg 18 io port: [0x1370-0x1377]
    pci 0000:00:1f.2: reg 1c io port: [0x1574-0x1577]
    pci 0000:00:1f.2: reg 20 io port: [0x40d0-0x40df]
    pci 0000:00:1f.2: reg 24 32bit mmio: [0xf4785000-0xf47853ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:08:00.0: reg 10 64bit mmio: [0xf4100000-0xf410ffff]
    pci 0000:08:00.0: PME# supported from D3hot D3cold
    pci 0000:08:00.0: PME# disabled
    pci 0000:00:1c.0: bridge 32bit mmio: [0xf4100000-0xf41fffff]
    pci 0000:10:00.0: reg 10 32bit mmio: [0xf4000000-0xf4000fff]
    pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
    pci 0000:10:00.0: PME# disabled
    pci 0000:00:1c.1: bridge 32bit mmio: [0xf4000000-0xf40fffff]
    pci 0000:00:1c.3: bridge io port: [0x2000-0x3fff]
    pci 0000:00:1c.3: bridge 32bit mmio: [0xf0000000-0xf3ffffff]
    pci 0000:02:06.0: reg 10 32bit mmio: [0xf4200000-0xf4200fff]
    pci 0000:02:06.0: supports D1 D2
    pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot
    pci 0000:02:06.0: PME# disabled
    pci 0000:02:06.2: reg 10 32bit mmio: [0xf4201000-0xf4201fff]
    pci 0000:02:06.2: supports D1 D2
    pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot
    pci 0000:02:06.2: PME# disabled
    pci 0000:02:06.3: reg 10 32bit mmio: [0xf4202000-0xf42020ff]
    pci 0000:02:06.3: supports D1 D2
    pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot
    pci 0000:02:06.3: PME# disabled
    pci 0000:02:06.4: reg 10 32bit mmio: [0xf4203000-0xf4203fff]
    pci 0000:02:06.4: reg 14 32bit mmio: [0xf4204000-0xf4204fff]
    pci 0000:02:06.4: supports D1 D2
    pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot
    pci 0000:02:06.4: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    pci 0000:00:1e.0: bridge 32bit mmio: [0xf4200000-0xf45fffff]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.C002.C098._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.C002.C101._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.C002.C111._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.C002.C117._PRT]
    ACPI: PCI Interrupt Link [C10D] (IRQs *10 11)
    ACPI: PCI Interrupt Link [C10E] (IRQs *10 11)
    ACPI: PCI Interrupt Link [C10F] (IRQs 10 *11)
    ACPI: PCI Interrupt Link [C110] (IRQs 10 11) *5
    ACPI: PCI Interrupt Link [C123] (IRQs *10 11)
    ACPI: PCI Interrupt Link [C124] (IRQs *10 11)
    ACPI: PCI Interrupt Link [C125] (IRQs 10 *11)
    ACPI Exception (pci_link-0182): AE_NOT_FOUND, Evaluating _PRS [20090320]
    SCSI subsystem initialized
    libata version 3.00 loaded.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    raid6: int32x1 682 MB/s
    raid6: int32x2 683 MB/s
    raid6: int32x4 506 MB/s
    raid6: int32x8 444 MB/s
    raid6: mmxx1 2185 MB/s
    raid6: mmxx2 2396 MB/s
    raid6: sse1x1 1321 MB/s
    raid6: sse1x2 1792 MB/s
    raid6: sse2x1 2540 MB/s
    raid6: sse2x2 2769 MB/s
    raid6: using algorithm sse2x2 (2769 MB/s)
    ACPI: WMI: Mapper loaded
    PCI: Using ACPI for IRQ routing
    NET: Registered protocol family 23
    Bluetooth: Core ver 2.15
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    cfg80211: Calling CRDA to update world regulatory domain
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 0
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 16 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:00: iomem range 0x0-0x9ffff could not be reserved
    system 00:00: iomem range 0xe0000-0xfffff could not be reserved
    system 00:00: iomem range 0x100000-0x7f7fffff could not be reserved
    system 00:0c: ioport range 0x500-0x55f has been reserved
    system 00:0c: ioport range 0x800-0x80f has been reserved
    system 00:0c: iomem range 0xffb00000-0xffbfffff has been reserved
    system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
    system 00:0e: ioport range 0x4d0-0x4d1 has been reserved
    system 00:0e: ioport range 0x1000-0x107f has been reserved
    system 00:0e: ioport range 0x1100-0x113f has been reserved
    system 00:0e: ioport range 0x1200-0x121f has been reserved
    system 00:0e: iomem range 0xf8000000-0xfbffffff has been reserved
    system 00:0e: iomem range 0xfec00000-0xfec000ff has been reserved
    system 00:0e: iomem range 0xfed20000-0xfed3ffff has been reserved
    system 00:0e: iomem range 0xfed45000-0xfed8ffff has been reserved
    system 00:0e: iomem range 0xfed90000-0xfed9afff has been reserved
    system 00:0f: iomem range 0xfeda0000-0xfedbffff has been reserved
    system 00:0f: iomem range 0xfee00000-0xfee00fff has been reserved
    pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
    pci 0000:00:1c.0: IO window: disabled
    pci 0000:00:1c.0: MEM window: 0xf4100000-0xf41fffff
    pci 0000:00:1c.0: PREFETCH window: disabled
    pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10
    pci 0000:00:1c.1: IO window: disabled
    pci 0000:00:1c.1: MEM window: 0xf4000000-0xf40fffff
    pci 0000:00:1c.1: PREFETCH window: disabled
    pci 0000:00:1c.3: PCI bridge, secondary bus 0000:20
    pci 0000:00:1c.3: IO window: 0x2000-0x3fff
    pci 0000:00:1c.3: MEM window: 0xf0000000-0xf3ffffff
    pci 0000:00:1c.3: PREFETCH window: disabled
    pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03
    pci 0000:02:06.0: IO window: 0x005000-0x0050ff
    pci 0000:02:06.0: IO window: 0x005400-0x0054ff
    pci 0000:02:06.0: PREFETCH window: 0x10000000-0x13ffffff
    pci 0000:02:06.0: MEM window: 0x14000000-0x17ffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:1e.0: IO window: 0x5000-0x5fff
    pci 0000:00:1e.0: MEM window: 0xf4200000-0xf45fffff
    pci 0000:00:1e.0: PREFETCH window: 0x00000010000000-0x00000013ffffff
    pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:1c.3: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    pci_bus 0000:08: resource 0 mem: [0x0-0x0]
    pci_bus 0000:08: resource 1 mem: [0xf4100000-0xf41fffff]
    pci_bus 0000:08: resource 2 mem: [0x0-0x0]
    pci_bus 0000:08: resource 3 mem: [0x0-0x0]
    pci_bus 0000:10: resource 0 mem: [0x0-0x0]
    pci_bus 0000:10: resource 1 mem: [0xf4000000-0xf40fffff]
    pci_bus 0000:10: resource 2 mem: [0x0-0x0]
    pci_bus 0000:10: resource 3 mem: [0x0-0x0]
    pci_bus 0000:20: resource 0 io: [0x2000-0x3fff]
    pci_bus 0000:20: resource 1 mem: [0xf0000000-0xf3ffffff]
    pci_bus 0000:20: resource 2 mem: [0x0-0x0]
    pci_bus 0000:20: resource 3 mem: [0x0-0x0]
    pci_bus 0000:02: resource 0 io: [0x5000-0x5fff]
    pci_bus 0000:02: resource 1 mem: [0xf4200000-0xf45fffff]
    pci_bus 0000:02: resource 2 mem: [0x10000000-0x13ffffff]
    pci_bus 0000:02: resource 3 io: [0x00-0xffff]
    pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
    pci_bus 0000:03: resource 0 io: [0x5000-0x50ff]
    pci_bus 0000:03: resource 1 io: [0x5400-0x54ff]
    pci_bus 0000:03: resource 2 mem: [0x10000000-0x13ffffff]
    pci_bus 0000:03: resource 3 mem: [0x14000000-0x17ffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
    TCP established hash table entries: 512 (order: 0, 4096 bytes)
    TCP bind hash table entries: 512 (order: 0, 4096 bytes)
    TCP: Hash tables configured (established 512 bind 512)
    TCP reno registered
    NET: Registered protocol family 1
    Machine check exception polling timer started.
    Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
    HugeTLB registered 4 MB page size, pre-allocated 0 pages
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    ROMFS MTD (C) 2007 Red Hat, Inc.
    msgmni has been set to 17
    alg: No test for stdrng (krng)
    async_tx: api initialized (sync-only)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:02.0: Boot video device
    ACPI: AC Adapter [C1B2] (on-line)
    input: Power Button (FF) as /class/input/input0
    ACPI: Power Button (FF) [PWRF]
    input: Sleep Button (CM) as /class/input/input1
    ACPI: Sleep Button (CM) [C249]
    input: Lid Switch as /class/input/input2
    ACPI: Lid Switch [C241]
    fan PNP0C0B:00: registered as cooling_device0
    ACPI: Fan [C331] (off)
    fan PNP0C0B:01: registered as cooling_device1
    ACPI: Fan [C332] (off)
    fan PNP0C0B:02: registered as cooling_device2
    ACPI: Fan [C333] (off)
    fan PNP0C0B:03: registered as cooling_device3
    ACPI: Fan [C334] (off)
    ACPI: SSDT 7f7f5d95 001FB (v01 HP Cpu0Ist 00003000 INTL 20060317)
    ACPI: SSDT 7f7f6015 004CB (v01 HP Cpu0Cst 00003001 INTL 20060317)
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    ACPI: CPU0 (power states: C1[C1] C2[C2])
    processor ACPI_CPU:00: registered as cooling_device4
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: SSDT 7f7f5ccd 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
    ACPI: SSDT 7f7f5f90 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
    ACPI: CPU1 (power states: C1[C1] C2[C2])
    processor ACPI_CPU:01: registered as cooling_device5
    ACPI: Processor [CPU1] (supports 8 throttling states)
    intel_rng: FWH not detected
    Linux agpgart interface v0.103
    agpgart-intel 0000:00:00.0: Intel 945GM Chipset
    agpgart-intel 0000:00:00.0: detected 7932K stolen memory
    agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
    SyncLink PC Card driver $Revision: 4.34 $
    ACPI: Battery Slot [C1B4] (battery present)
    SyncLink PC Card driver $Revision: 4.34 $, tty major#253
    ACPI: Battery Slot [C1B3] (battery absent)
    cm4000_cs.c v2.4.0gm6 - All bugs added by Harald Welte
    OMNIKEY CardMan 4040 v1.1.0gm5 - All bugs added by Harald Welte
    Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
    Hangcheck: Using get_cycles().
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
    Floppy drive(s): fd0 is 1.44M
    floppy0: no floppy controllers found
    brd: module loaded
    loop: module loaded
    Uniform Multi-Platform E-IDE driver
    piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x01)
    pci 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    piix 0000:00:1f.1: IDE port disabled
    piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x40a0-0x40a7
    Probing IDE interface ide0...
    hda: HL-DT-ST DVDRAM GSA-U10N, ATAPI CD/DVD-ROM drive
    hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
    hda: MWDMA2 mode selected
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
    ide-gd driver 1.18
    ide-cd driver 5.00
    ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
    Uniform CD-ROM driver Revision: 3.20
    Driver 'sd' needs updating - please use bus_type methods
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    ahci 0000:00:1f.2: irq 24 for MSI/MSI-X
    ahci: SSS flag set, parallel bus scan disabled
    ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 abar m1024@0xf4785000 port 0xf4785100 irq 24
    ata2: DUMMY
    ata3: DUMMY
    ata4: DUMMY
    tg3.c:v3.98 (February 25, 2009)
    tg3 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    tg3 0000:08:00.0: setting latency timer to 64
    tg3 0000:08:00.0: wake-up capability disabled by ACPI
    tg3 0000:08:00.0: PME# disabled
    eth0: Tigon3 [partno(BCM95751M) rev 4201] (PCI Express) MAC address 00:1e:ec:a3:fa:9f
    eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
    eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    PPP generic driver version 2.4.2
    console [netcon0] enabled
    netconsole: network logging started
    yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30ad]
    yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
    yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
    yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
    yenta_cardbus 0000:02:06.0: TI: mfunc 0x01aa1b22, devctl 0x64
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
    ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
    ata1.00: ATA-8: WDC WD3200BEVT-00ZCT0, 11.01A11, max UDMA/133
    ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
    ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
    ata1.00: configured for UDMA/133
    ata1.00: configured for UDMA/133
    ata1: EH complete
    scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-0 11.0 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cf8, PCI irq 18
    yenta_cardbus 0000:02:06.0: Socket status: 30000006
    pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
    yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
    yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xf4200000 - 0xf45fffff
    yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x10000000 - 0x13ffffff
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4784000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    116x: driver isp116x-hcd, 03 Nov 2005
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004020
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 22, io base 0x00004040
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.3: setting latency timer to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.3: irq 19, io base 0x00004080
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    sl811: driver sl811-hcd, 19 May 2005
    driver u132_hcd built at 10:45:40 on Jan 5 2010
    usbcore: registered new interface driver cdc_acm
    cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
    usbcore: registered new interface driver usblp
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usbcore: registered new interface driver libusual
    usbcore: registered new interface driver ums-alauda
    usbcore: registered new interface driver ums-datafab
    usbcore: registered new interface driver ums-freecom
    usbcore: registered new interface driver ums-isd200
    usbcore: registered new interface driver ums-jumpshot
    usbcore: registered new interface driver ums-karma
    usb 2-1: new full speed USB device using uhci_hcd and address 2
    usbcore: registered new interface driver ums-sddr09
    usbcore: registered new interface driver ums-sddr55
    usbcore: registered new interface driver ums-usbat
    usbcore: registered new interface driver usbserial
    usbserial: USB Serial Driver core
    driver ftdi-elan built at 10:45:37 on Jan 5 2010
    usbcore: registered new interface driver ftdi-elan
    PNP: PS/2 Controller [PNP0303:C21D,PNP0f13:C21E] at 0x60,0x64 irq 1,12
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    i2c /dev entries driver
    md: linear personality registered for level -1
    input: AT Translated Set 2 keyboard as /class/input/input3
    md: raid0 personality registered for level 0
    md: raid1 personality registered for level 1
    md: raid10 personality registered for level 10
    md: raid6 personality registered for level 6
    md: raid5 personality registered for level 5
    md: raid4 personality registered for level 4
    md: multipath personality registered for level -4
    device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
    device-mapper: multipath: version 1.0.5 loaded
    device-mapper: multipath round-robin: version 1.0.0 loaded
    Bluetooth: Broadcom Blutonium firmware driver ver 1.2
    usbcore: registered new interface driver bcm203x
    EDAC MC: Ver: 2.1.0 Jan 5 2010
    cpuidle: using governor ladder
    Marking TSC unstable due to TSC halts in idle
    cpuidle: using governor menu
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    usb 2-1: configuration #1 chosen from 1 choice
    Advanced Linux Sound Architecture Driver Version 1.0.19.
    HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    ALSA device list:
    #0: HDA Intel at 0xf4780000 irq 16
    Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000
    oprofile: using NMI interrupt.
    serio: Synaptics pass-through port at isa0060/serio4/input0
    TCP cubic registered
    NET: Registered protocol family 10
    IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    input: SynPS/2 Synaptics TouchPad as /class/input/input4
    Bluetooth: L2CAP ver 2.13
    usb 3-1: new full speed USB device using uhci_hcd and address 2
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: SCO (Voice Link) ver 0.6
    Bluetooth: SCO socket layer initialized
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM ver 1.11
    Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    Bluetooth: BNEP filters: protocol multicast
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    Using IPI No-Shortcut mode
    usb 3-1: configuration #1 chosen from 1 choice
    input: PS/2 Generic Mouse as /class/input/input5
    md: Waiting for all devices to be available before autodetect
    md: If you don't use raid, use raid=noautodetect
    md: Autodetecting RAID arrays.
    md: Scanned 0 and added 0 devices.
    md: autorun ...
    md: ... autorun DONE.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with writeback data mode.
    VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
    Freeing unused kernel memory: 324k freed
    EXT3 FS on sda5, internal journal




    \
     
     \ /
      Last update: 2010-01-05 22:21    [W:2.656 / U:0.036 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site