lkml.org 
[lkml]   [2010]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 38/68] atiixp: convert to ide2libata
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] atiixp: convert to ide2libata

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/atiixp.c | 126 +--------------------------------------------------
1 file changed, 4 insertions(+), 122 deletions(-)

Index: b/drivers/ide/atiixp.c
===================================================================
--- a/drivers/ide/atiixp.c
+++ b/drivers/ide/atiixp.c
@@ -12,130 +12,12 @@

#define DRV_NAME "atiixp"

-#define ATIIXP_IDE_PIO_TIMING 0x40
-#define ATIIXP_IDE_MDMA_TIMING 0x44
-#define ATIIXP_IDE_PIO_CONTROL 0x48
-#define ATIIXP_IDE_PIO_MODE 0x4a
-#define ATIIXP_IDE_UDMA_CONTROL 0x54
-#define ATIIXP_IDE_UDMA_MODE 0x56
-
-typedef struct {
- u8 command_width;
- u8 recover_width;
-} atiixp_ide_timing;
-
-static atiixp_ide_timing pio_timing[] = {
- { 0x05, 0x0d },
- { 0x04, 0x07 },
- { 0x03, 0x04 },
- { 0x02, 0x02 },
- { 0x02, 0x00 },
-};
-
-static atiixp_ide_timing mdma_timing[] = {
- { 0x07, 0x07 },
- { 0x02, 0x01 },
- { 0x02, 0x00 },
-};
-
-static DEFINE_SPINLOCK(atiixp_lock);
-
-/**
- * atiixp_set_pio_mode - set host controller for PIO mode
- * @hwif: port
- * @drive: drive
- *
- * Set the interface PIO mode.
- */
-
-static void atiixp_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long flags;
- int timing_shift = (drive->dn ^ 1) * 8;
- u32 pio_timing_data;
- u16 pio_mode_data;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- spin_lock_irqsave(&atiixp_lock, flags);
-
- pci_read_config_word(dev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
- pio_mode_data &= ~(0x07 << (drive->dn * 4));
- pio_mode_data |= (pio << (drive->dn * 4));
- pci_write_config_word(dev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
-
- pci_read_config_dword(dev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
- pio_timing_data &= ~(0xff << timing_shift);
- pio_timing_data |= (pio_timing[pio].recover_width << timing_shift) |
- (pio_timing[pio].command_width << (timing_shift + 4));
- pci_write_config_dword(dev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
-
- spin_unlock_irqrestore(&atiixp_lock, flags);
-}
-
-/**
- * atiixp_set_dma_mode - set host controller for DMA mode
- * @hwif: port
- * @drive: drive
- *
- * Set a ATIIXP host controller to the desired DMA mode. This involves
- * programming the right timing data into the PCI configuration space.
- */
-
-static void atiixp_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long flags;
- int timing_shift = (drive->dn ^ 1) * 8;
- u32 tmp32;
- u16 tmp16;
- u16 udma_ctl = 0;
- const u8 speed = drive->dma_mode;
-
- spin_lock_irqsave(&atiixp_lock, flags);
-
- pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &udma_ctl);
-
- if (speed >= XFER_UDMA_0) {
- pci_read_config_word(dev, ATIIXP_IDE_UDMA_MODE, &tmp16);
- tmp16 &= ~(0x07 << (drive->dn * 4));
- tmp16 |= ((speed & 0x07) << (drive->dn * 4));
- pci_write_config_word(dev, ATIIXP_IDE_UDMA_MODE, tmp16);
-
- udma_ctl |= (1 << drive->dn);
- } else if (speed >= XFER_MW_DMA_0) {
- u8 i = speed & 0x03;
-
- pci_read_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, &tmp32);
- tmp32 &= ~(0xff << timing_shift);
- tmp32 |= (mdma_timing[i].recover_width << timing_shift) |
- (mdma_timing[i].command_width << (timing_shift + 4));
- pci_write_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, tmp32);
-
- udma_ctl &= ~(1 << drive->dn);
- }
-
- pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, udma_ctl);
-
- spin_unlock_irqrestore(&atiixp_lock, flags);
-}
-
-static int atiixp_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- u8 udma_mode = 0, ch = hwif->channel;
-
- pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode);
-
- if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40)
- return ATA_CBL_PATA80;
- else
- return ATA_CBL_PATA40;
-}
+#include <linux/ide2libata.h>
+#include <../ata/pata_atiixp.h>

static const struct ide_port_ops atiixp_port_ops = {
- .set_pio_mode = atiixp_set_pio_mode,
- .set_dma_mode = atiixp_set_dma_mode,
+ .set_pio_mode = atiixp_set_piomode,
+ .set_dma_mode = atiixp_set_dmamode,
.cable_detect = atiixp_cable_detect,
};


\
 
 \ /
  Last update: 2010-01-29 17:19    [W:0.337 / U:6.664 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site