lkml.org 
[lkml]   [2010]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Hang: 2.6.32.4 sky2/DMAR (was [PATCH] sky2: Fix WARNING: at lib/dma-debug.c:902 check_sync)
On 1/27/2010 11:50 AM, Stephen Hemminger wrote:
> On Wed, 27 Jan 2010 10:34:51 -0500
> Michael Breuer<mbreuer@majjas.com> wrote:
>
>
>> On 01/23/2010 06:21 PM, Jarek Poplawski wrote:
>>
>>> On Fri, Jan 22, 2010 at 06:50:21PM -0500, Michael Breuer wrote:
>>>
>>>
>>>> When the packets were dropped, there was a different sequence in the
>>>> log - DISCOVER/OFFER repeated. The "normal" is that the sequence
>>>> appeared correct and complete - DISCOVER/OFFER/REQUEST/ACK - or
>>>> INFORM/ACK (vs. INFORM repeatedly sans ACK) as the case may be.
>>>>
>>>>
>>> Anyway, I'd be intersted if the switch matters here.
>>>
>>> Plus one more test: could you try to load sky2 with the parameter:
>>> "copybreak=1" (the rest as in any recent test, which gave you dmar
>>> errors; any switch).
>>>
>>> Thanks,
>>> Jarek P.
>>>
>>>
>> Ok - now up 80+ hours with copybreak=1. I'm going to redo w/o copybreak
>> to confirm that I haven't inadvertently fixed something. However, given
>> that it might be copybreak-related, I looked at sky2.c again and I'm
>> wondering about the copybreak max size in sky2_rx_start:
>>
>> size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
>>
>> /* Stopping point for hardware truncation */
>> thresh = (size - 8) / sizeof(u32);
>>
>> sky2->rx_nfrags = size>> PAGE_SHIFT;
>> BUG_ON(sky2->rx_nfrags> ARRAY_SIZE(re->frag_addr));
>>
>> /* Compute residue after pages */
>> size -= sky2->rx_nfrags<< PAGE_SHIFT;
>>
>> /* Optimize to handle small packets and headers */
>> if (size< copybreak)
>> size = copybreak;
>> if (size< ETH_HLEN)
>> size = ETH_HLEN;
>>
>>
>> Why would increasing size to copybreak be valid here?
>>
>> Guessing a bit as I'm not sure about rx_nfrags, but if I read this
>> correctly, if size is ever less than copybreak it's because there isn't
>> enough space left for anything larger. If so, wouldn't increasing size
>> potentially corrupt something? I'd further guess that the resulting
>> condition manifests sooner (or at least with a more visible effect) when
>> using DMAR.
>>
>> In any event, why "copybreak" as the minimum buffer size? I'd suggest
>> that if it isn't possible to allocate at least MTU + overhead that
>> sky2_rx_start ought to be delayed until there is room.
>>
> This code is where driver decides how much data will be received in skb
> data area and the remaining data spills over into skb frags.
> Copybreak is the threshold so that packets less than size are copied
> to a new skb. The code doing the copying there assumes the data is
> totally contained in the skb (not in frags). The size increase there
> is to make sure that assumption is always true. I suppose you
> could do something perverse like setting copybreak really huge
> and confuse driver, but that is a user error.
>
>
Ok - but I'm wondering under what circumstances size would be <
copybreak in the first place after computing the residue. If size ends
up being unreasonably small, is simply increasing the number to whatever
copybreak is correct? Assuming my testing is correct, then the crash
I've been experiencing when using dmar (only) seems related to the value
of copybreak. I don't think the other use (skb reuse) is the issue (but
hey, I could have missed something). The crash occurs when copybreak is
the default of 128, didn't happen when I set copybreak to 1.



\
 
 \ /
  Last update: 2010-01-27 17:59    [W:0.091 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site