lkml.org 
[lkml]   [2010]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: usbmc seems broken
(cc's added)

On Fri, 22 Jan 2010 16:40:06 +0000
Neil Kalo <neilkalo@gmail.com> wrote:

> I cannot get usbtmc to work with my device. I am using fedora 12:
> 2.6.31.12-174.2.3.fc12.i686.PAE
>
> Jan 22 15:40:26 localhost kernel: usb 4-1: new full speed USB device
> using ohci_hcd and address 4
> Jan 22 15:40:26 localhost kernel: usb 4-1: New USB device found,
> idVendor=05e6, idProduct=2100
> Jan 22 15:40:26 localhost kernel: usb 4-1: New USB device strings:
> Mfr=2, Product=3, SerialNumber=1
> Jan 22 15:40:26 localhost kernel: usb 4-1: Product: 2100 Multimeter
> Jan 22 15:40:26 localhost kernel: usb 4-1: Manufacturer: KEITHLEY INSTRUMENTS
> Jan 22 15:40:26 localhost kernel: usb 4-1: SerialNumber: 1160791
> Jan 22 15:40:26 localhost kernel: usb 4-1: configuration #1 chosen from 1 choice
> Jan 22 15:40:26 localhost kernel: usbtmc 4-1:1.0: can't read capabilities
>
> If I compile the original Agilent module from
> "http://www.home.agilent.com/upload/cmc_upload/All/usbtmc.html" It
> works fine:
>
> Jan 22 15:37:45 localhost kernel: usb 4-1: new full speed USB device
> using ohci_hcd and address 3
> Jan 22 15:37:45 localhost kernel: usb 4-1: New USB device found,
> idVendor=05e6, idProduct=2100
> Jan 22 15:37:45 localhost kernel: usb 4-1: New USB device strings:
> Mfr=2, Product=3, SerialNumber=1
> Jan 22 15:37:45 localhost kernel: usb 4-1: Product: 2100 Multimeter
> Jan 22 15:37:45 localhost kernel: usb 4-1: Manufacturer: KEITHLEY INSTRUMENTS
> Jan 22 15:37:45 localhost kernel: usb 4-1: SerialNumber: 1160791
> Jan 22 15:37:45 localhost kernel: usb 4-1: configuration #1 chosen from 1 choice
> Jan 22 15:37:45 localhost kernel: USBTMC: MKDEV
> Jan 22 15:37:45 localhost kernel: USBTMC: CDEV_ADD f900000 1
>
> Note that I do get one error line per module load, but this does not
> prevent the device from working in my application:
> Jan 22 15:38:21 localhost kernel: USBTMC: Unable to read data, error -110
>
> This error also sometimes occurs with the standard kernel module, but
> I never get a functioning connection to my device:
> Jan 16 23:43:36 localhost kernel: usbtmc 1-4.1.1:1.0: can't read capabilities
> Jan 16 23:52:31 localhost kernel: usbtmc 1-4.1.1:1.0: Unable to read
> data, error -110
>
> Where do I go from here?



\
 
 \ /
  Last update: 2010-01-27 02:05    [W:0.046 / U:1.872 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site