lkml.org 
[lkml]   [2010]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
On Thu, Jan 14, 2010 at 8:40 AM, Krzysztof Halasa <khc@pm.waw.pl> wrote:
> Robert Hancock <hancockrwd@gmail.com> writes:
>
>> The behavior here is strange, the controller reports a connection
>> status change interrupt with CommWake which should indicate that some
>> device completed the handshake with the controller, but then the SATA
>> link shows down. I assume there's nothing plugged into the two JMicron
>> SATA ports?
>
> Precisely nothing. Only the PATA is connected.

It would be interesting to see what happens if you actually plug
something into that port that's having the issues, and see what
happens. I'm kind of inclined to suspect it's a hardware fault, though
it would likely require a report from someone else with the same or
similar board model to confirm that..


\
 
 \ /
  Last update: 2010-01-15 01:17    [W:0.117 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site