lkml.org 
[lkml]   [2010]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [BISECTED, REGRESSION] Successful resume from suspend but freezes after I/O
Date
On Wednesday 13 January 2010 20:57:21 Yinghai Lu wrote:
> so e820_update_range does right job...
>
> please you try to disable
>
> X86_CHECK_BIOS_CORRUPTION
>
> and
>
> CONFIG_X86_RESERVE_LOW_64K

I did a checkout of master and built with these two settings disabled. Here's
how it went when I booted that and suspended/resumed (I have no idea why the
file system went crazy):

-----------------------------------------------------------------------------

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32 (vl@trevor) (gcc version 4.4.1 (Ubuntu
4.4.1-4ubuntu8) ) #3 SMP Thu Jan 14 13:14:22 CET 2010
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32
root=UUID=160351ee-c9b0-4a72-9fd5-9962c8137a7e ro debug nosplash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee2000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001a0000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x1a0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 100000000 mask F00000000 write-back
[ 0.000000] 3 base 1C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 1A0000000 mask FE0000000 uncachable
[ 0.000000] 5 base 0DFF00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfee0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfee0000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001a0000000
[ 0.000000] 0100000000 - 01a0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1a0000000 @ c000-14000
[ 0.000000] RAMDISK: 33b14000 - 37fef9ee
[ 0.000000] ACPI: RSDP 00000000000f7280 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000dfee2040 0004C (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000dfee20c0 00074 (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000dfee2180 04CD9 (v01 GBT GBTUACPI 00001000
MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000dfee0000 00040
[ 0.000000] ACPI: EUDS 00000000dfee7580 00500 (v01 GBT 00000000
00000000)
[ 0.000000] ACPI: HPET 00000000dfee74c0 00038 (v01 GBT GBTUACPI 42302E31
GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000dfee7540 0003C (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000dfee6ec0 00084 (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000dfee83b0 0018A (v01 PmRef Cpu0Cst 00003001
INTL 20040311)
[ 0.000000] ACPI: SSDT 00000000dfee8540 0018A (v01 PmRef Cpu1Cst 00003001
INTL 20040311)
[ 0.000000] ACPI: SSDT 00000000dfee86d0 0018A (v01 PmRef Cpu2Cst 00003001
INTL 20040311)
[ 0.000000] ACPI: SSDT 00000000dfee8860 0018A (v01 PmRef Cpu3Cst 00003001
INTL 20040311)
[ 0.000000] ACPI: SSDT 00000000dfee89f0 003AB (v01 PmRef CpuPm 00003000
INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 01a0000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000
- 0000008000]
[ 0.000000] #2 [0001000000 - 0001ac2584] TEXT DATA BSS ==> [0001000000
- 0001ac2584]
[ 0.000000] #3 [0033b14000 - 0037fef9ee] RAMDISK ==> [0033b14000
- 0037fef9ee]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800
- 0000100000]
[ 0.000000] #5 [0001ac3000 - 0001ac30f6] BRK ==> [0001ac3000
- 0001ac30f6]
[ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000
- 000000c000]
[ 0.000000] #7 [000000c000 - 000000f000] PGTABLE ==> [000000c000
- 000000f000]
[ 0.000000] found SMP MP-table at [ffff8800000f5890] f5890
[ 0.000000] [ffffea0000000000-ffffea0005bfffff] PMD -> [ffff880028600000-
ffff88002dbfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001a0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfee0
[ 0.000000] 0: 0x00100000 -> 0x001a0000
[ 0.000000] On node 0 totalpages: 1572479
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 106 pages reserved
[ 0.000000] DMA zone: 3837 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 898840 pages, LIFO batch:31
[ 0.000000] Normal zone: 8960 pages used for memmap
[ 0.000000] Normal zone: 646400 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfee0000 -
00000000dfee2000
[ 0.000000] PM: Registered nosave memory: 00000000dfee2000 -
00000000dfef0000
[ 0.000000] PM: Registered nosave memory: 00000000dfef0000 -
00000000dff00000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 -
00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 -
00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 -
00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap:
dff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s90200 r8192
d24488 u524288
[ 0.000000] pcpu-alloc: s90200 r8192 d24488 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 1549077
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32
root=UUID=160351ee-c9b0-4a72-9fd5-9962c8137a7e ro debug nosplash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 -
ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 6040356k/6815744k available (5307k kernel code, 525828k
absent, 248644k reserved, 3593k data, 548k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 62914560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu
timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2833.327 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer
frequency.. 5666.65 BogoMIPS (lpj=11333308)
[ 0.004101] Security Framework initialized
[ 0.004149] SELinux: Disabled at boot.
[ 0.004192] Mount-cache hash table entries: 256
[ 0.004349] Initializing cgroup subsys ns
[ 0.004390] Initializing cgroup subsys cpuacct
[ 0.004430] Initializing cgroup subsys memory
[ 0.004472] Initializing cgroup subsys freezer
[ 0.004525] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004590] CPU: L2 cache: 6144K
[ 0.004629] CPU: Physical Processor ID: 0
[ 0.004666] CPU: Processor Core ID: 0
[ 0.004705] using mwait in idle threads.
[ 0.004742] Performance Events: Core2 events, Intel PMU driver.
[ 0.005425] ... version: 2
[ 0.005462] ... bit width: 40
[ 0.005500] ... generic registers: 2
[ 0.005538] ... value mask: 000000ffffffffff
[ 0.005577] ... max period: 000000007fffffff
[ 0.005616] ... fixed-purpose events: 3
[ 0.005654] ... event mask: 0000000700000003
[ 0.008746] ACPI: Core revision 20090903
[ 0.016058] Setting APIC routing to flat
[ 0.016453] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056999] CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping
0a
[ 0.060001] Booting processor 1 APIC 0x3 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] Calibrating delay using timer specific routine.. 5665.98
BogoMIPS (lpj=11331967)
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 6144K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 3
[ 0.144085] CPU1: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping
0a
[ 0.144413] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.148121] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.008000] Initializing CPU#2
[ 0.008000] Calibrating delay using timer specific routine.. 5665.98
BogoMIPS (lpj=11331966)
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 6144K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 2
[ 0.236093] CPU2: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping
0a
[ 0.236421] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.240118] Booting processor 3 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#3
[ 0.008000] Calibrating delay using timer specific routine.. 5665.95
BogoMIPS (lpj=11331900)
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 6144K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.328098] CPU3: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping
0a
[ 0.328427] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.332078] Brought up 4 CPUs
[ 0.332117] Total of 4 processors activated (22664.57 BogoMIPS).
[ 0.334338] CPU0 attaching sched-domain:
[ 0.334377] domain 0: span 0,3 level MC
[ 0.334442] groups: 0 3
[ 0.334560] domain 1: span 0-3 level CPU
[ 0.334625] groups: 0,3 (cpu_power = 2048) 1-2 (cpu_power = 2048)
[ 0.334801] CPU1 attaching sched-domain:
[ 0.334839] domain 0: span 1-2 level MC
[ 0.334903] groups: 1 2
[ 0.335020] domain 1: span 0-3 level CPU
[ 0.335085] groups: 1-2 (cpu_power = 2048) 0,3 (cpu_power = 2048)
[ 0.335260] CPU2 attaching sched-domain:
[ 0.335298] domain 0: span 1-2 level MC
[ 0.335362] groups: 2 1
[ 0.335480] domain 1: span 0-3 level CPU
[ 0.336041] groups: 1-2 (cpu_power = 2048) 0,3 (cpu_power = 2048)
[ 0.336216] CPU3 attaching sched-domain:
[ 0.336254] domain 0: span 0,3 level MC
[ 0.336318] groups: 3 0
[ 0.336446] domain 1: span 0-3 level CPU
[ 0.336511] groups: 0,3 (cpu_power = 2048) 1-2 (cpu_power = 2048)
[ 0.336797] regulator: core version 0.5
[ 0.336797] Time: 13:30:58 Date: 01/14/10
[ 0.336797] NET: Registered protocol family 16
[ 0.336797] ACPI: bus type pci registered
[ 0.336797] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.336797] PCI: MCFG area at f0000000 reserved in E820
[ 0.337417] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.337456] PCI: Using configuration type 1 for base access
[ 0.338023] bio: create slab <bio-0> at 0
[ 0.340356] ACPI: EC: Look up EC in DSDT
[ 0.344001] ACPI: Interpreter enabled
[ 0.344001] ACPI: (supports S0 S3 S4 S5)
[ 0.344001] ACPI: Using IOAPIC for interrupt routing
[ 0.349209] ACPI: No dock devices found.
[ 0.349320] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.349430] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.349471] pci 0000:00:01.0: PME# disabled
[ 0.349563] pci 0000:00:1a.0: reg 20 io port: [0xe200-0xe21f]
[ 0.349655] pci 0000:00:1a.1: reg 20 io port: [0xe000-0xe01f]
[ 0.349747] pci 0000:00:1a.2: reg 20 io port: [0xe100-0xe11f]
[ 0.349832] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8205000-0xf82053ff]
[ 0.349934] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8200000-0xf8203fff]
[ 0.350005] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.350046] pci 0000:00:1b.0: PME# disabled
[ 0.350130] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.350171] pci 0000:00:1c.0: PME# disabled
[ 0.350257] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.350298] pci 0000:00:1c.3: PME# disabled
[ 0.350382] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.350424] pci 0000:00:1c.4: PME# disabled
[ 0.350502] pci 0000:00:1d.0: reg 20 io port: [0xe300-0xe31f]
[ 0.350594] pci 0000:00:1d.1: reg 20 io port: [0xe400-0xe41f]
[ 0.350687] pci 0000:00:1d.2: reg 20 io port: [0xe500-0xe51f]
[ 0.350771] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8204000-0xf82043ff]
[ 0.350976] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.351019] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.351061] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.351103] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.351145] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f]
[ 0.351188] pci 0000:00:1f.2: reg 24 io port: [0xf100-0xf10f]
[ 0.351261] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf8206000-0xf82060ff]
[ 0.351310] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.351381] pci 0000:00:1f.5: reg 10 io port: [0xe700-0xe707]
[ 0.351423] pci 0000:00:1f.5: reg 14 io port: [0xe800-0xe803]
[ 0.351466] pci 0000:00:1f.5: reg 18 io port: [0xe900-0xe907]
[ 0.351508] pci 0000:00:1f.5: reg 1c io port: [0xea00-0xea03]
[ 0.351551] pci 0000:00:1f.5: reg 20 io port: [0xeb00-0xeb0f]
[ 0.351603] pci 0000:00:1f.5: reg 24 io port: [0xec00-0xec0f]
[ 0.351685] pci 0000:01:00.0: reg 10 32bit mmio: [0xf6000000-0xf6ffffff]
[ 0.351731] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.351778] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf4000000-0xf5ffffff]
[ 0.351821] pci 0000:01:00.0: reg 24 io port: [0xc000-0xc07f]
[ 0.351863] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.351949] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[ 0.351989] pci 0000:00:01.0: bridge 32bit mmio: [0xf4000000-0xf7ffffff]
[ 0.352005] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.352163] pci 0000:03:00.0: reg 24 32bit mmio: [0xf8000000-0xf8001fff]
[ 0.352236] pci 0000:03:00.0: PME# supported from D3hot
[ 0.352278] pci 0000:03:00.0: PME# disabled
[ 0.352359] pci 0000:03:00.1: reg 10 io port: [0xd000-0xd007]
[ 0.352405] pci 0000:03:00.1: reg 14 io port: [0xd100-0xd103]
[ 0.352451] pci 0000:03:00.1: reg 18 io port: [0xd200-0xd207]
[ 0.352496] pci 0000:03:00.1: reg 1c io port: [0xd300-0xd303]
[ 0.352542] pci 0000:03:00.1: reg 20 io port: [0xd400-0xd40f]
[ 0.352656] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
[ 0.352698] pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xf80fffff]
[ 0.352808] pci 0000:05:07.0: reg 10 32bit mmio: [0xf8104000-0xf81047ff]
[ 0.352853] pci 0000:05:07.0: reg 14 32bit mmio: [0xf8100000-0xf8103fff]
[ 0.352927] pci 0000:05:07.0: supports D1 D2
[ 0.352966] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.353007] pci 0000:05:07.0: PME# disabled
[ 0.353075] pci 0000:00:1e.0: transparent bridge
[ 0.353116] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8100000-0xf81fffff]
[ 0.353173] pci_bus 0000:00: on NUMA node 0
[ 0.353213] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.353348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.353427] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.353510] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.353587] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.365767] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14
15)
[ 0.366229] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 0.366743] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14
15)
[ 0.367203] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14
15)
[ 0.367672] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 0.368201] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 14
15)
[ 0.368661] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14
15)
[ 0.369121] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14
15)
[ 0.369579] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.369629] vgaarb: loaded
[ 0.369735] SCSI subsystem initialized
[ 0.369785] libata version 3.00 loaded.
[ 0.369785] usbcore: registered new interface driver usbfs
[ 0.369785] usbcore: registered new interface driver hub
[ 0.369785] usbcore: registered new device driver usb
[ 0.369785] ACPI: WMI: Mapper loaded
[ 0.369785] PCI: Using ACPI for IRQ routing
[ 0.369785] Bluetooth: Core ver 2.15
[ 0.369785] NET: Registered protocol family 31
[ 0.369785] Bluetooth: HCI device and connection manager initialized
[ 0.369785] Bluetooth: HCI socket layer initialized
[ 0.369785] NET: Registered protocol family 8
[ 0.369785] NET: Registered protocol family 20
[ 0.369785] NetLabel: Initializing
[ 0.369785] NetLabel: domain hash size = 128
[ 0.369785] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.369785] NetLabel: unlabeled traffic allowed by default
[ 0.369785] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.369785] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.376015] Switching to clocksource tsc
[ 0.377240] pnp: PnP ACPI init
[ 0.377294] ACPI: bus type pnp registered
[ 0.379017] pnp: PnP ACPI: found 12 devices
[ 0.379056] ACPI: ACPI bus type pnp unregistered
[ 0.379102] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.379142] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.379183] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.379224] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.379265] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.379305] system 00:01: ioport range 0x4c0-0x4ff could not be reserved
[ 0.379349] system 00:08: ioport range 0x400-0x4bf has been reserved
[ 0.379392] system 00:09: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.379435] system 00:0a: iomem range 0xccc00-0xcffff has been reserved
[ 0.379476] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.379517] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.379558] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
[ 0.379600] system 00:0a: iomem range 0xdfee0000-0xdfefffff could not be
reserved
[ 0.379653] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.379699] system 00:0a: iomem range 0x100000-0xdfedffff could not be
reserved
[ 0.379756] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 0.379805] system 00:0a: iomem range 0xfed10000-0xfed1dfff has been
reserved
[ 0.379847] system 00:0a: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.379888] system 00:0a: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.379929] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.379971] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.380012] system 00:0a: iomem range 0xe0000-0xeffff has been reserved
[ 0.384664] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.384705] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.384745] pci 0000:00:01.0: MEM window: 0xf4000000-0xf7ffffff
[ 0.384786] pci 0000:00:01.0: PREFETCH window:
0x000000e0000000-0x000000efffffff
[ 0.384836] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.384877] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.384918] pci 0000:00:1c.0: MEM window: 0xf8300000-0xf84fffff
[ 0.384960] pci 0000:00:1c.0: PREFETCH window:
0x000000f8500000-0x000000f86fffff
[ 0.385012] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
[ 0.385052] pci 0000:00:1c.3: IO window: 0xd000-0xdfff
[ 0.385093] pci 0000:00:1c.3: MEM window: 0xf8000000-0xf80fffff
[ 0.385135] pci 0000:00:1c.3: PREFETCH window:
0x000000f8700000-0x000000f88fffff
[ 0.385186] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04
[ 0.385227] pci 0000:00:1c.4: IO window: 0x2000-0x2fff
[ 0.385268] pci 0000:00:1c.4: MEM window: 0xf8900000-0xf8afffff
[ 0.385309] pci 0000:00:1c.4: PREFETCH window:
0x000000f8b00000-0x000000f8cfffff
[ 0.385361] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.385401] pci 0000:00:1e.0: IO window: disabled
[ 0.385442] pci 0000:00:1e.0: MEM window: 0xf8100000-0xf81fffff
[ 0.385483] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.385529] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.385571] pci 0000:00:01.0: setting latency timer to 64
[ 0.385615] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.385656] pci 0000:00:1c.0: setting latency timer to 64
[ 0.385701] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.385743] pci 0000:00:1c.3: setting latency timer to 64
[ 0.385786] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.385828] pci 0000:00:1c.4: setting latency timer to 64
[ 0.385870] pci 0000:00:1e.0: setting latency timer to 64
[ 0.385911] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.385951] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.385992] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.386032] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf7ffffff]
[ 0.386072] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.386113] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.386152] pci_bus 0000:02: resource 1 mem: [0xf8300000-0xf84fffff]
[ 0.386193] pci_bus 0000:02: resource 2 pref mem [0xf8500000-0xf86fffff]
[ 0.386233] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.386273] pci_bus 0000:03: resource 1 mem: [0xf8000000-0xf80fffff]
[ 0.386313] pci_bus 0000:03: resource 2 pref mem [0xf8700000-0xf88fffff]
[ 0.386354] pci_bus 0000:04: resource 0 io: [0x2000-0x2fff]
[ 0.386394] pci_bus 0000:04: resource 1 mem: [0xf8900000-0xf8afffff]
[ 0.386434] pci_bus 0000:04: resource 2 pref mem [0xf8b00000-0xf8cfffff]
[ 0.386475] pci_bus 0000:05: resource 1 mem: [0xf8100000-0xf81fffff]
[ 0.386515] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.386555] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.386618] NET: Registered protocol family 2
[ 0.386715] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.387142] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
[ 0.388327] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.388826] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.388867] TCP reno registered
[ 0.388972] NET: Registered protocol family 1
[ 0.389159] pci 0000:01:00.0: Boot video device
[ 0.389239] Trying to unpack rootfs image as initramfs...
[ 1.528694] Freeing initrd memory: 70510k freed
[ 1.562166] audit: initializing netlink socket (disabled)
[ 1.562221] type=2000 audit(1263475858.561:1): initialized
[ 1.569545] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.570627] VFS: Disk quotas dquot_6.5.2
[ 1.570700] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.571149] fuse init (API version 7.13)
[ 1.571238] msgmni has been set to 11937
[ 1.571657] alg: No test for stdrng (krng)
[ 1.571710] io scheduler noop registered
[ 1.571753] io scheduler anticipatory registered
[ 1.571792] io scheduler deadline registered
[ 1.571837] io scheduler cfq registered (default)
[ 1.572010] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 1.572052] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.572161] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 1.572205] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.572329] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 1.572372] pcieport 0000:00:1c.3: setting latency timer to 64
[ 1.572518] pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X
[ 1.572562] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.572661] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.572768] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.572915] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.572966] ACPI: Power Button [PWRB]
[ 1.573051] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.573100] ACPI: Power Button [PWRF]
[ 1.573512] ACPI: SSDT 00000000dfee7ad0 0022A (v01 PmRef Cpu0Ist 00003000
INTL 20040311)
[ 1.573789] Marking TSC unstable due to TSC halts in idle
[ 1.573859] processor LNXCPU:00: registered as cooling_device0
[ 1.574077] ACPI: SSDT 00000000dfee7f90 00152 (v01 PmRef Cpu1Ist 00003000
INTL 20040311)
[ 1.574400] ACPI Error (psparse-0537): Method parse/execution failed
[\_PR_.CPU1._PDC] (Node ffff88019f815ee0), AE_ALREADY_EXISTS
[ 1.574536] ACPI: Marking method _PDC as Serialized because of
AE_ALREADY_EXISTS error
[ 1.574702] Switching to clocksource hpet
[ 1.574784] processor LNXCPU:01: registered as cooling_device1
[ 1.575099] ACPI: SSDT 00000000dfee80f0 00152 (v01 PmRef Cpu2Ist 00003000
INTL 20040311)
[ 1.575417] ACPI Error (psparse-0537): Method parse/execution failed
[\_PR_.CPU2._PDC] (Node ffff88019f815f60), AE_ALREADY_EXISTS
[ 1.575552] ACPI: Marking method _PDC as Serialized because of
AE_ALREADY_EXISTS error
[ 1.575766] processor LNXCPU:02: registered as cooling_device2
[ 1.575980] ACPI: SSDT 00000000dfee8250 00152 (v01 PmRef Cpu3Ist 00003000
INTL 20040311)
[ 1.576317] ACPI Error (psparse-0537): Method parse/execution failed
[\_PR_.CPU3._PDC] (Node ffff88019f815fe0), AE_ALREADY_EXISTS
[ 1.576451] ACPI: Marking method _PDC as Serialized because of
AE_ALREADY_EXISTS error
[ 1.576666] processor LNXCPU:03: registered as cooling_device3
[ 1.578347] XENFS: not registering filesystem on non-xen platform
[ 1.579157] Linux agpgart interface v0.103
[ 1.579198] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.580058] brd: module loaded
[ 1.580400] loop: module loaded
[ 1.580483] input: Macintosh mouse button emulation as
/devices/virtual/input/input2
[ 1.580603] ahci 0000:03:00.0: version 3.0
[ 1.580654] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.593534] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3
impl SATA mode
[ 1.593586] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.593636] ahci 0000:03:00.0: setting latency timer to 64
[ 1.593828] scsi0 : ahci
[ 1.593955] scsi1 : ahci
[ 1.594057] ata1: SATA max UDMA/133 abar m8192@0xf8000000 port 0xf8000100
irq 19
[ 1.594107] ata2: SATA max UDMA/133 abar m8192@0xf8000000 port 0xf8000180
irq 19
[ 1.594192] ata_piix 0000:00:1f.2: version 2.13
[ 1.594248] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 1.594291] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.594490] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.594600] scsi2 : ata_piix
[ 1.594708] scsi3 : ata_piix
[ 1.595288] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.595331] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.595403] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 1.595467] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.595667] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.595761] scsi4 : ata_piix
[ 1.595873] scsi5 : ata_piix
[ 1.596284] ata5: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq
19
[ 1.596326] ata6: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq
19
[ 1.597270] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.597313] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) ->
IRQ 16
[ 1.597382] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.597479] scsi6 : pata_jmicron
[ 1.597595] scsi7 : pata_jmicron
[ 1.598112] ata7: PATA max UDMA/100 cmd 0xd000 ctl 0xd100 bmdma 0xd400 irq
16
[ 1.598153] ata8: PATA max UDMA/100 cmd 0xd200 ctl 0xd300 bmdma 0xd408 irq
16
[ 1.598429] Fixed MDIO Bus: probed
[ 1.598469] PPP generic driver version 2.4.2
[ 1.598561] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.598614] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 1.598661] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.598701] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.598765] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 1
[ 1.602726] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.602774] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8205000
[ 1.617510] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.617624] usb usb1: configuration #1 chosen from 1 choice
[ 1.617682] hub 1-0:1.0: USB hub found
[ 1.617723] hub 1-0:1.0: 6 ports detected
[ 1.617802] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 1.617848] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.617889] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.617947] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 2
[ 1.621892] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.621940] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8204000
[ 1.636012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.636106] usb usb2: configuration #1 chosen from 1 choice
[ 1.636171] hub 2-0:1.0: USB hub found
[ 1.636212] hub 2-0:1.0: 6 ports detected
[ 1.636287] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.636337] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.636407] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 1.636450] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.636491] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.636553] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 1.636619] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e200
[ 1.636707] usb usb3: configuration #1 chosen from 1 choice
[ 1.636762] hub 3-0:1.0: USB hub found
[ 1.636803] hub 3-0:1.0: 2 ports detected
[ 1.636874] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ
21
[ 1.636918] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.636958] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.637016] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
[ 1.637087] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000
[ 1.637175] usb usb4: configuration #1 chosen from 1 choice
[ 1.637229] hub 4-0:1.0: USB hub found
[ 1.637270] hub 4-0:1.0: 2 ports detected
[ 1.637338] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 1.637381] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.637422] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.637479] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus
number 5
[ 1.637552] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e100
[ 1.637644] usb usb5: configuration #1 chosen from 1 choice
[ 1.637700] hub 5-0:1.0: USB hub found
[ 1.637741] hub 5-0:1.0: 2 ports detected
[ 1.637809] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 1.637853] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.637893] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.637950] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 6
[ 1.638015] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[ 1.638102] usb usb6: configuration #1 chosen from 1 choice
[ 1.638156] hub 6-0:1.0: USB hub found
[ 1.638197] hub 6-0:1.0: 2 ports detected
[ 1.638264] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 1.638307] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.638348] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.638407] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 7
[ 1.638472] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 1.638559] usb usb7: configuration #1 chosen from 1 choice
[ 1.638615] hub 7-0:1.0: USB hub found
[ 1.638655] hub 7-0:1.0: 2 ports detected
[ 1.638723] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 1.638767] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.638807] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.638863] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 8
[ 1.638928] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[ 1.639016] usb usb8: configuration #1 chosen from 1 choice
[ 1.639074] hub 8-0:1.0: USB hub found
[ 1.639115] hub 8-0:1.0: 2 ports detected
[ 1.639207] usbcore: registered new interface driver libusual
[ 1.639276] PNP: No PS/2 controller found. Probing ports directly.
[ 1.639654] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.639699] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.639807] mice: PS/2 mouse device common for all mice
[ 1.639904] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 1.639968] rtc_cmos 00:04: RTC can wake from S4
[ 1.640043] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.640101] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.640215] device-mapper: uevent: version 1.0.3
[ 1.640340] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@redhat.com
[ 1.640578] device-mapper: multipath: version 1.1.0 loaded
[ 1.640643] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.641169] cpuidle: using governor ladder
[ 1.641361] cpuidle: using governor menu
[ 1.641632] TCP cubic registered
[ 1.641747] NET: Registered protocol family 10
[ 1.642088] lo: Disabled Privacy Extensions
[ 1.642314] NET: Registered protocol family 17
[ 1.642363] Bluetooth: L2CAP ver 2.14
[ 1.642401] Bluetooth: L2CAP socket layer initialized
[ 1.642441] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.642479] Bluetooth: SCO socket layer initialized
[ 1.642553] Bluetooth: RFCOMM TTY layer initialized
[ 1.642601] Bluetooth: RFCOMM socket layer initialized
[ 1.642640] Bluetooth: RFCOMM ver 1.11
[ 1.647910] PM: Resume from disk failed.
[ 1.647959] registered taskstats version 1
[ 1.648305] Magic number: 10:874:533
[ 1.648361] bdi 1:11: hash matches
[ 1.648473] rtc_cmos 00:04: setting system clock to 2010-01-14 13:30:59 UTC
(1263475859)
[ 1.648547] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.648590] EDD information not available.
[ 1.912048] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.912130] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.927603] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.938182] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.216039] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 2.350715] usb 2-2: configuration #1 chosen from 1 choice
[ 2.404092] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.404156] ata3.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.405575] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.405642] ata4.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.437841] ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
[ 2.437884] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.437945] ata4.01: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100
[ 2.445853] ata4.00: configured for UDMA/133
[ 2.446267] ata3.00: HPA detected: current 1953523055, native 1953525168
[ 2.446312] ata3.00: ATA-8: ST31000528AS, CC34, max UDMA/133
[ 2.446368] ata3.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.446581] ata3.01: ATA-7: ST3300831AS, 3.02, max UDMA/133
[ 2.446624] ata3.01: 586072368 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.460251] ata4.01: configured for UDMA/100
[ 2.502283] ata3.00: configured for UDMA/133
[ 2.516368] ata3.01: configured for UDMA/133
[ 2.516525] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC34
PQ: 0 ANSI: 5
[ 2.516672] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.516710] sd 2:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00
TB/931 GiB)
[ 2.516740] sd 2:0:0:0: [sda] Write Protect is off
[ 2.516742] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.516757] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.516852] sda: sda1
[ 2.530520] scsi 2:0:1:0: Direct-Access ATA ST3300831AS 3.02
PQ: 0 ANSI: 5
[ 2.530611] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 2.530614] sd 2:0:1:0: [sdb] 586072368 512-byte logical blocks: (300
GB/279 GiB)
[ 2.530648] sd 2:0:1:0: [sdb] Write Protect is off
[ 2.530650] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.530665] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10
PQ: 0 ANSI: 5
[ 2.530667] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.530743] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.530932] sda2 <
[ 2.531375] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 2.531986] scsi 3:0:1:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01
PQ: 0 ANSI: 5
[ 2.534442] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.534489] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.535718] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2
cdda tray
[ 2.536401] Uniform CD-ROM driver Revision: 3.20
[ 2.536423] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.536522] sdc:
[ 2.536550] sr 3:0:1:0: Attached scsi CD-ROM sr0
[ 2.536585] sr 3:0:1:0: Attached scsi generic sg3 type 5
[ 2.543010] sdb: sda5 sdb1
[ 2.574475] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 2.574522] sda6 sda7 sdc2 < sdc5 sda8 sda9 >
[ 2.620082] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.622684] sdc6 sdc7 > sdc3
[ 2.664544] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.703445] Freeing unused kernel memory: 548k freed
[ 2.703580] Write protecting the kernel read-only data: 7632k
[ 2.756037] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 2.807702] Floppy drive(s): fd0 is 1.44M
[ 2.826271] FDC 0 is a post-1991 82077
[ 2.826442] ohci1394 0000:05:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 2.881641] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23]
MMIO=[f8104000-f81047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.042804] usb 3-1: configuration #1 chosen from 1 choice
[ 3.284044] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 3.453695] usb 5-1: configuration #1 chosen from 1 choice
[ 3.518522] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 3.518565] EXT3-fs: write access will be enabled during recovery.
[ 3.696538] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 3.864739] usb 5-2: configuration #1 chosen from 1 choice
[ 4.104037] usb 8-1: new full speed USB device using uhci_hcd and address 2
[ 4.152427] ieee1394: Host added: ID:BUS[0-00:1023] GUID[007c2d6400001fd0]
[ 4.278110] usb 8-1: configuration #1 chosen from 1 choice
[ 4.280065] hub 8-1:1.0: USB hub found
[ 4.282018] hub 8-1:1.0: 4 ports detected
[ 4.528048] usb 8-2: new low speed USB device using uhci_hcd and address 3
[ 4.703095] usb 8-2: configuration #1 chosen from 1 choice
[ 4.709940] usbcore: registered new interface driver hiddev
[ 4.728379] input: Logitech USB RECEIVER as
/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[ 4.728556] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11
Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.2-2/input0
[ 4.728636] usbcore: registered new interface driver usbhid
[ 4.728704] usbhid: v2.6:USB HID core driver
[ 4.783020] usb 8-1.4: new low speed USB device using uhci_hcd and address
4
[ 4.923116] usb 8-1.4: configuration #1 chosen from 1 choice
[ 4.950242] input: CHESEN PS2 to USB Converter as
/devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.4/8-1.4:1.0/input/input4
[ 4.950344] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10
Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-1.4/input0
[ 4.978292] input: CHESEN PS2 to USB Converter as
/devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.4/8-1.4:1.1/input/input5
[ 4.978389] generic-usb 0003:0A81:0205.0003: input,hidraw2: USB HID v1.10
Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-1.4/input1
[ 13.504143] kjournald starting. Commit interval 5 seconds
[ 13.504170] EXT3-fs: sda8: orphan cleanup on readonly fs
[ 13.504176] ext3_orphan_cleanup: deleting unreferenced inode 860297
[ 13.504206] ext3_orphan_cleanup: deleting unreferenced inode 860290
[ 13.533775] ext3_orphan_cleanup: deleting unreferenced inode 860268
[ 13.533829] ext3_orphan_cleanup: deleting unreferenced inode 860258
[ 13.540044] ext3_orphan_cleanup: deleting unreferenced inode 860254
[ 13.540094] ext3_orphan_cleanup: deleting unreferenced inode 860252
[ 13.542952] ext3_orphan_cleanup: deleting unreferenced inode 860203
[ 13.549223] ext3_orphan_cleanup: deleting unreferenced inode 860179
[ 13.560210] EXT3-fs: sda8: 8 orphan inodes deleted
[ 13.560251] EXT3-fs: recovery complete.
[ 13.581521] EXT3-fs: mounted filesystem with writeback data mode.
[ 20.765269] udev: starting version 147
[ 20.952447] lp: driver loaded but no devices found
[ 22.063222] nvidia: module license 'NVIDIA' taints kernel.
[ 22.063226] Disabling lock debugging due to kernel taint
[ 22.337606] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 22.528018] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.528024] nvidia 0000:01:00.0: setting latency timer to 64
[ 22.528277] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri
Aug 14 17:35:21 PDT 2009
[ 22.579815] Linux video capture interface: v2.00
[ 22.761716] pwc: Philips webcam module version 10.0.13 loaded.
[ 22.761718] pwc: Supports Philips PCA645/646, PCVC675/680/690,
PCVC720[40]/730/740/750 & PCVC830/840.
[ 22.761719] pwc: Also supports the Askey VC010, various Logitech Quickcams,
Samsung MPC-C10 and MPC-C30,
[ 22.761721] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and
Visionite VCS-UC300 and VCS-UM100.
[ 22.761742] pwc: Logitech QuickCam 4000 Pro USB webcam detected.
[ 22.762711] pwc: Registered as /dev/video0.
[ 22.765769] input: PWC snapshot button as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/input/input6
[ 22.765844] usbcore: registered new interface driver Philips webcam
[ 22.861723] it87: Found IT8718F chip at 0x290, revision 5
[ 22.861732] it87: in3 is VCC (+5V)
[ 23.394182] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 23.394376] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 23.591994] usbcore: registered new interface driver snd-usb-audio
[ 23.946600] Intel AES-NI instructions are not detected.
[ 24.085846] padlock: VIA PadLock not detected.
[ 24.320389] padlock: VIA PadLock Hash Engine not detected.
[ 24.393876] Adding 6562544k swap on /dev/mapper/cryptoswap. Priority:-1
extents:1 across:6562544k
[ 24.504721] EXT3 FS on sda8, internal journal
[ 24.667044] kjournald starting. Commit interval 5 seconds
[ 24.667057] EXT3-fs: mounted filesystem with writeback data mode.
[ 24.690847] kjournald starting. Commit interval 5 seconds
[ 24.691125] EXT3 FS on sda6, internal journal
[ 24.691129] EXT3-fs: mounted filesystem with writeback data mode.
[ 24.889948] kjournald starting. Commit interval 5 seconds
[ 24.890234] EXT3 FS on sdc5, internal journal
[ 24.890239] EXT3-fs: mounted filesystem with writeback data mode.
[ 24.919298] kjournald starting. Commit interval 5 seconds
[ 24.919563] EXT3 FS on sdc6, internal journal
[ 24.919567] EXT3-fs: mounted filesystem with writeback data mode.
[ 36.851649] kjournald starting. Commit interval 5 seconds
[ 36.851656] EXT3-fs warning: maximal mount count reached, running e2fsck is
recommended
[ 36.853411] EXT3 FS on dm-1, internal journal
[ 36.853414] EXT3-fs: mounted filesystem with writeback data mode.
[ 41.713695] CPUFREQ: Per core ondemand sysfs interface is deprecated -
up_threshold
[ 105.902182] kjournald starting. Commit interval 5 seconds
[ 105.902223] EXT3-fs warning: maximal mount count reached, running e2fsck is
recommended
[ 105.905178] EXT3 FS on dm-1, internal journal
[ 105.905182] EXT3-fs: mounted filesystem with writeback data mode.
[ 132.141209] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 132.141212] vboxdrv: Successfully done.
[ 132.141213] vboxdrv: Found 4 processor cores.
[ 132.141525] VBoxDrv: dbg - g_abExecMemory=ffffffffa0cbb0e0
[ 132.141611] vboxdrv: fAsync=0 offMin=0x39e offMax=0x7b51
[ 132.141996] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 132.141999] vboxdrv: Successfully loaded version 3.1.2 (interface
0x00100001).
[ 132.505707] ppdev: user-space parallel port driver
[ 390.693702] PM: Syncing filesystems ... done.
[ 390.821528] PM: Preparing system for mem sleep
[ 390.821533] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 390.822220] Freezing remaining freezable tasks ... (elapsed 0.00 seconds)
done.
[ 390.822254] PM: Entering mem sleep
[ 390.822268] Suspending console(s) (use no_console_suspend to debug)
[ 391.005552] sd 3:0:0:0: [sdc] Synchronizing SCSI cache
[ 391.006010] sd 3:0:0:0: [sdc] Stopping disk
[ 391.429533] sd 2:0:1:0: [sdb] Synchronizing SCSI cache
[ 391.429681] sd 2:0:1:0: [sdb] Stopping disk
[ 391.429822] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 391.430025] sd 2:0:0:0: [sda] Stopping disk
[ 391.968178] ACPI handle has no context!
[ 391.968233] ACPI handle has no context!
[ 391.984207] pata_jmicron 0000:03:00.1: PCI INT B disabled
[ 392.032274] ahci 0000:03:00.0: PCI INT A disabled
[ 392.099861] ata_piix 0000:00:1f.5: PCI INT B disabled
[ 392.112201] ata_piix 0000:00:1f.2: PCI INT B disabled
[ 392.128112] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 392.128118] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 392.128123] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 392.128129] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 392.232198] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 392.248109] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[ 392.248115] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[ 392.248120] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 392.248126] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 392.248186] PM: suspend devices took 1.428 seconds
[ 392.280646] ACPI: Preparing to enter system sleep state S3
[ 392.284305] Disabling non-boot CPUs ...
[ 392.286565] CPU 1 is now offline
[ 392.286823] CPU0 attaching NULL sched-domain.
[ 392.286825] CPU1 attaching NULL sched-domain.
[ 392.286827] CPU2 attaching NULL sched-domain.
[ 392.286829] CPU3 attaching NULL sched-domain.
[ 392.320016] CPU0 attaching sched-domain:
[ 392.320018] domain 0: span 0,3 level MC
[ 392.320019] groups: 0 3
[ 392.320022] domain 1: span 0,2-3 level CPU
[ 392.320023] groups: 0,3 (cpu_power = 2048) 2
[ 392.320026] CPU2 attaching sched-domain:
[ 392.320028] domain 0: span 0,2-3 level CPU
[ 392.320029] groups: 2 0,3 (cpu_power = 2048)
[ 392.320032] CPU3 attaching sched-domain:
[ 392.320033] domain 0: span 0,3 level MC
[ 392.320034] groups: 3 0
[ 392.320036] domain 1: span 0,2-3 level CPU
[ 392.320038] groups: 0,3 (cpu_power = 2048) 2
[ 392.320374] CPU1 is down
[ 392.424006] CPU 2 is now offline
[ 392.424160] CPU0 attaching NULL sched-domain.
[ 392.424162] CPU2 attaching NULL sched-domain.
[ 392.424163] CPU3 attaching NULL sched-domain.
[ 392.456012] CPU0 attaching sched-domain:
[ 392.456013] domain 0: span 0,3 level MC
[ 392.456014] groups: 0 3
[ 392.456017] CPU3 attaching sched-domain:
[ 392.456018] domain 0: span 0,3 level MC
[ 392.456019] groups: 3 0
[ 392.456224] CPU2 is down
[ 392.560012] CPU 3 is now offline
[ 392.560015] SMP alternatives: switching to UP code
[ 392.564674] CPU0 attaching NULL sched-domain.
[ 392.564676] CPU3 attaching NULL sched-domain.
[ 392.564680] CPU0 attaching NULL sched-domain.
[ 392.564821] CPU3 is down
[ 392.564827] Back to C!
[ 392.564827] Enabling non-boot CPUs ...
[ 392.564827] SMP alternatives: switching to SMP code
[ 392.569509] Booting processor 1 APIC 0x3 ip 0x6000
[ 392.286700] Initializing CPU#1
[ 392.286700] Calibrating delay using timer specific routine.. 5666.01
BogoMIPS (lpj=11332026)
[ 392.286700] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 392.286700] CPU: L2 cache: 6144K
[ 392.286700] CPU: Physical Processor ID: 0
[ 392.286700] CPU: Processor Core ID: 3
[ 392.660038] CPU1: Intel 06/17 stepping 0a
[ 392.660098] CPU0 attaching NULL sched-domain.
[ 392.672010] CPU0 attaching sched-domain:
[ 392.672012] domain 0: span 0-1 level CPU
[ 392.672013] groups: 0 1
[ 392.672016] CPU1 attaching sched-domain:
[ 392.672017] domain 0: span 0-1 level CPU
[ 392.672019] groups: 1 0
[ 392.672274] CPU1 is up
[ 392.672469] Booting processor 2 APIC 0x2 ip 0x6000
[ 392.424063] Initializing CPU#2
[ 392.424063] Calibrating delay using timer specific routine.. 5666.00
BogoMIPS (lpj=11332002)
[ 392.424063] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 392.424063] CPU: L2 cache: 6144K
[ 392.424063] CPU: Physical Processor ID: 0
[ 392.424063] CPU: Processor Core ID: 2
[ 392.760018] CPU2: Intel 06/17 stepping 0a
[ 392.760107] CPU0 attaching NULL sched-domain.
[ 392.760109] CPU1 attaching NULL sched-domain.
[ 392.780011] CPU0 attaching sched-domain:
[ 392.780012] domain 0: span 0-2 level CPU
[ 392.780014] groups: 0 1-2 (cpu_power = 2048)
[ 392.780017] CPU1 attaching sched-domain:
[ 392.780018] domain 0: span 1-2 level MC
[ 392.780019] groups: 1 2
[ 392.780021] domain 1: span 0-2 level CPU
[ 392.780023] groups: 1-2 (cpu_power = 2048) 0
[ 392.780026] CPU2 attaching sched-domain:
[ 392.780027] domain 0: span 1-2 level MC
[ 392.780028] groups: 2 1
[ 392.780030] domain 1: span 0-2 level CPU
[ 392.780031] groups: 1-2 (cpu_power = 2048) 0
[ 392.780359] CPU2 is up
[ 392.780588] Booting processor 3 APIC 0x1 ip 0x6000
[ 392.564563] Initializing CPU#3
[ 392.564563] Calibrating delay using timer specific routine.. 5665.94
BogoMIPS (lpj=11331884)
[ 392.564563] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 392.564563] CPU: L2 cache: 6144K
[ 392.564563] CPU: Physical Processor ID: 0
[ 392.564563] CPU: Processor Core ID: 1
[ 392.868037] CPU3: Intel 06/17 stepping 0a
[ 392.868128] CPU0 attaching NULL sched-domain.
[ 392.868130] CPU1 attaching NULL sched-domain.
[ 392.868132] CPU2 attaching NULL sched-domain.
[ 392.884012] CPU0 attaching sched-domain:
[ 392.884014] domain 0: span 0,3 level MC
[ 392.884015] groups: 0 3
[ 392.884017] domain 1: span 0-3 level CPU
[ 392.884019] groups: 0,3 (cpu_power = 2048) 1-2 (cpu_power = 2048)
[ 392.884022] CPU1 attaching sched-domain:
[ 392.884024] domain 0: span 1-2 level MC
[ 392.884025] groups: 1 2
[ 392.884027] domain 1: span 0-3 level CPU
[ 392.884028] groups: 1-2 (cpu_power = 2048) 0,3 (cpu_power = 2048)
[ 392.884031] CPU2 attaching sched-domain:
[ 392.884033] domain 0: span 1-2 level MC
[ 392.884034] groups: 2 1
[ 392.884036] domain 1: span 0-3 level CPU
[ 392.884037] groups: 1-2 (cpu_power = 2048) 0,3 (cpu_power = 2048)
[ 392.884040] CPU3 attaching sched-domain:
[ 392.884041] domain 0: span 0,3 level MC
[ 392.884043] groups: 3 0
[ 392.884045] domain 1: span 0-3 level CPU
[ 392.884046] groups: 0,3 (cpu_power = 2048) 1-2 (cpu_power = 2048)
[ 392.884508] CPU3 is up
[ 392.886642] ACPI: Waking up from system sleep state S3
[ 392.888073] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was
0x100, writing 0x105)
[ 392.888084] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was
0x4, writing 0xf8200004)
[ 392.888088] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was
0x0, writing 0x8)
[ 392.888091] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was
0x100000, writing 0x100002)
[ 392.888108] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was
0x100, writing 0x10a)
[ 392.888115] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was
0x10001, writing 0xf861f851)
[ 392.888118] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was
0x0, writing 0xf840f830)
[ 392.888121] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was
0x20000000, writing 0x1010)
[ 392.888126] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was
0x810000, writing 0x810008)
[ 392.888129] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was
0x100000, writing 0x100407)
[ 392.888154] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was
0x400, writing 0x40b)
[ 392.888160] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was
0x10001, writing 0xf881f871)
[ 392.888163] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was
0x0, writing 0xf800f800)
[ 392.888166] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was
0x0, writing 0xd0d0)
[ 392.888171] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was
0x810000, writing 0x810008)
[ 392.888175] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was
0x100000, writing 0x100407)
[ 392.888199] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was
0x100, writing 0x10a)
[ 392.888205] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was
0x10001, writing 0xf8c1f8b1)
[ 392.888208] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was
0x0, writing 0xf8a0f890)
[ 392.888211] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was
0x2000f0f0, writing 0x2020)
[ 392.888216] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was
0x810000, writing 0x810008)
[ 392.888220] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was
0x100003, writing 0x100407)
[ 392.888419] ata_piix 0000:00:1f.5: restoring config space at offset 0x1 (was
0x2b00003, writing 0x2b00007)
[ 392.888435] nvidia 0000:01:00.0: restoring config space at offset 0xf (was
0x100, writing 0x10a)
[ 392.888441] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was
0x1, writing 0xc001)
[ 392.888444] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was
0x4, writing 0xf4000004)
[ 392.888447] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was
0xc, writing 0xe000000c)
[ 392.888450] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was
0x0, writing 0xf6000000)
[ 392.888454] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was
0x100000, writing 0x100007)
[ 392.888483] ahci 0000:03:00.0: restoring config space at offset 0xf (was
0x100, writing 0x10b)
[ 392.888497] ahci 0000:03:00.0: restoring config space at offset 0x8 (was
0xd401, writing 0x0)
[ 392.888502] ahci 0000:03:00.0: restoring config space at offset 0x7 (was
0xd301, writing 0x0)
[ 392.888506] ahci 0000:03:00.0: restoring config space at offset 0x6 (was
0xd201, writing 0x0)
[ 392.888511] ahci 0000:03:00.0: restoring config space at offset 0x5 (was
0xd101, writing 0x0)
[ 392.888515] ahci 0000:03:00.0: restoring config space at offset 0x4 (was
0xd001, writing 0x0)
[ 392.888520] ahci 0000:03:00.0: restoring config space at offset 0x3 (was 0x0,
writing 0x800008)
[ 392.888524] ahci 0000:03:00.0: restoring config space at offset 0x2 (was
0x1018502, writing 0x1060102)
[ 392.888568] pata_jmicron 0000:03:00.1: restoring config space at offset 0x8
(was 0x1, writing 0xd401)
[ 392.888573] pata_jmicron 0000:03:00.1: restoring config space at offset 0x7
(was 0x1, writing 0xd301)
[ 392.888577] pata_jmicron 0000:03:00.1: restoring config space at offset 0x6
(was 0x1, writing 0xd201)
[ 392.888582] pata_jmicron 0000:03:00.1: restoring config space at offset 0x5
(was 0x1, writing 0xd101)
[ 392.888586] pata_jmicron 0000:03:00.1: restoring config space at offset 0x4
(was 0x1, writing 0xd001)
[ 392.888594] pata_jmicron 0000:03:00.1: restoring config space at offset 0x1
(was 0x100000, writing 0x100005)
[ 392.888611] ohci1394 0000:05:07.0: restoring config space at offset 0xf (was
0x4020100, writing 0x4020107)
[ 392.888624] ohci1394 0000:05:07.0: restoring config space at offset 0x5 (was
0x0, writing 0xf8100000)
[ 392.888627] ohci1394 0000:05:07.0: restoring config space at offset 0x4 (was
0x0, writing 0xf8104000)
[ 392.888631] ohci1394 0000:05:07.0: restoring config space at offset 0x3 (was
0x0, writing 0x2008)
[ 392.888635] ohci1394 0000:05:07.0: restoring config space at offset 0x1 (was
0x2100000, writing 0x2100006)
[ 392.888770] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 392.888774] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 392.888792] usb usb3: root hub lost power or was reset
[ 392.888822] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ
21
[ 392.888825] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 392.888842] usb usb4: root hub lost power or was reset
[ 392.888854] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 392.888858] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 392.888874] usb usb5: root hub lost power or was reset
[ 392.888894] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 392.888898] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 392.888904] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 392.888908] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 392.984271] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 392.984276] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 392.984296] usb usb6: root hub lost power or was reset
[ 392.984316] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 392.984319] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 392.984338] usb usb7: root hub lost power or was reset
[ 392.984359] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 392.984363] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 392.984382] usb usb8: root hub lost power or was reset
[ 392.984412] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 392.984421] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 392.984428] pci 0000:00:1e.0: setting latency timer to 64
[ 392.984433] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 392.984437] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 392.985757] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 392.985760] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 393.434970] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 393.434976] ahci 0000:03:00.0: setting latency timer to 64
[ 393.448157] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) ->
IRQ 16
[ 393.448168] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 393.504121] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23]
MMIO=[f8104000-f81047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 393.550661] ata6: SATA link down (SStatus 4 SControl 300)
[ 393.561259] ata5: SATA link down (SStatus 4 SControl 300)
[ 393.768048] ata1: SATA link down (SStatus 0 SControl 300)
[ 393.768075] ata2: SATA link down (SStatus 0 SControl 300)
[ 394.028100] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 394.028125] ata4.01: SATA link down (SStatus 0 SControl 123)
[ 394.028129] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 394.028142] ata3.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 394.036345] ata4.01: ACPI cmd ef/03:45:00:00:00:b0 (SET FEATURES) filtered
out
[ 394.036356] ata3.01: ACPI cmd ef/03:45:00:00:00:b0 (SET FEATURES) filtered
out
[ 394.036366] ata4.01: ACPI cmd ef/03:45:00:00:00:b0 (SET FEATURES) filtered
out
[ 394.036374] ata3.01: ACPI cmd ef/03:45:00:00:00:b0 (SET FEATURES) filtered
out
[ 394.036383] ata4.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered
out
[ 394.036391] ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered
out
[ 394.044215] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered
out
[ 394.044217] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered
out
[ 394.044220] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered
out
[ 394.044348] ata4.00: n_sectors mismatch 976773168 != 976771055
[ 394.044350] ata4.00: revalidation failed (errno=-19)
[ 394.044353] ata4.00: limiting SATA link speed to 1.5 Gbps
[ 394.044711] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered
out
[ 394.044713] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered
out
[ 394.044716] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered
out
[ 394.130264] ata3.00: configured for UDMA/133
[ 394.136855] ata3.01: configured for UDMA/133
[ 396.576622] sd 2:0:0:0: [sda] Starting disk
[ 396.590335] sd 2:0:1:0: [sdb] Starting disk
[ 396.610677] sd 3:0:0:0: [sdc] Starting disk
[ 399.824075] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 399.824087] ata4.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 399.856340] ata4.00: n_sectors mismatch 976773168 != 976771055
[ 399.856342] ata4.00: revalidation failed (errno=-19)
[ 399.856344] ata4.00: disabled
[ 399.860026] sd 3:0:0:0: rejecting I/O to offline device
[ 399.860033] sd 3:0:0:0: rejecting I/O to offline device
[ 399.860058] sd 3:0:0:0: [sdc] START_STOP FAILED
[ 399.860060] sd 3:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[ 399.860065] PM: Device 3:0:0:0 failed to resume: error 65536
[ 400.656594] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 400.656606] ata4.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 400.688844] ata4.00: HPA detected: current 976771055, native 976773168
[ 400.688848] ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
[ 400.688850] ata4.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 400.700336] ata4.00: configured for UDMA/133
[ 400.712739] ata4.01: configured for UDMA/100
[ 400.713798] sd 3:0:0:0: [sdc] 976771055 512-byte logical blocks: (500
GB/465 GiB)
[ 400.713877] sdc: detected capacity change from 500107862016 to 500106780160
[ 400.714096] ata4.00: detaching (SCSI 3:0:0:0)
[ 402.860034]
[ 402.860035] floppy driver state
[ 402.860036] -------------------
[ 402.860039] now=4294993011 last interrupt=4294898622 diff=94389 last called
handler=ffffffffa00147f0
[ 402.860040] timeout_message=lock fdc
[ 402.860041] last output bytes:
[ 402.860043] 8 80 4294893002
[ 402.860044] 8 80 4294893002
[ 402.860046] 8 80 4294893002
[ 402.860047] 8 80 4294893002
[ 402.860048] 12 80 4294898620
[ 402.860049] 0 90 4294898620
[ 402.860051] 13 90 4294898620
[ 402.860052] 0 90 4294898620
[ 402.860053] 1a 90 4294898620
[ 402.860054] 0 90 4294898620
[ 402.860055] 3 90 4294898620
[ 402.860057] c1 90 4294898620
[ 402.860058] 10 90 4294898620
[ 402.860059] 7 90 4294898620
[ 402.860060] 0 90 4294898620
[ 402.860062] 8 81 4294898621
[ 402.860063] f 80 4294898621
[ 402.860064] 0 90 4294898621
[ 402.860065] 1 91 4294898621
[ 402.860067] 8 81 4294898622
[ 402.860068] last result at 4294898622
[ 402.860069] last redo_fd_request at 4294898627
[ 402.860070] 20 1
[ 402.860076] status=0
[ 402.860077] fdc_busy=1
[ 402.860078] do_floppy=ffffffffa0010740
[ 402.860079] cont=ffffffffa0017900
[ 402.860081] current_req=(null)
[ 402.860082] command_status=-1
[ 402.860083]
[ 402.860085] floppy0: floppy timeout called
[ 402.972034] usb 3-1: reset full speed USB device using uhci_hcd and address
2
[ 403.611363] snd-usb-audio 3-1:1.1: no reset_resume for driver snd-usb-
audio?
[ 403.611365] snd-usb-audio 3-1:1.2: no reset_resume for driver snd-usb-
audio?
[ 403.868037] usb 5-1: reset low speed USB device using uhci_hcd and address
2
[ 404.280032] usb 5-2: reset full speed USB device using uhci_hcd and address
3
[ 404.540032] usb 8-1: reset full speed USB device using uhci_hcd and address
2
[ 405.164033] usb 8-2: reset low speed USB device using uhci_hcd and address
3
[ 405.471835] input input3: event field not found
[ 405.471837] input input3: event field not found
[ 405.471838] input input3: event field not found
[ 405.471840] input input3: event field not found
[ 405.471841] input input3: event field not found
[ 405.471842] input input3: event field not found
[ 405.471844] input input3: event field not found
[ 405.733842] usb 8-1.4: reset low speed USB device using uhci_hcd and
address 4
[ 406.051468] pwc: Logitech QuickCam 4000 Pro USB webcam detected.
[ 406.051506] pwc: Registered as /dev/video0.
[ 406.054456] input: PWC snapshot button as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/input/input7
[ 406.289780] PM: resume devices took 13.400 seconds
[ 406.289781] ------------[ cut here ]------------
[ 406.289786] WARNING: at kernel/power/suspend_test.c:53
suspend_test_finish+0x83/0x90()
[ 406.289788] Hardware name: EP45-UD3
[ 406.289789] Component: resume devices, time: 13400
[ 406.289790] Modules linked in: binfmt_misc ppdev vboxnetadp vboxnetflt
vboxdrv sha256_generic cryptd aes_x86_64 aes_generic dm_crypt
snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_usb_audio snd_pcm_oss
snd_mixer_oss snd_pcm snd_seq_dummy snd_usb_lib snd_hwdep snd_seq_oss
snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device
it87 snd iptable_filter hwmon_vid pwc videodev soundcore coretemp psmouse
ip_tables v4l1_compat snd_page_alloc nvidia(P) serio_raw x_tables
v4l2_compat_ioctl32 lp parport usbhid ohci1394 ieee1394 floppy intel_agp
[ 406.289812] Pid: 6339, comm: pm-suspend Tainted: P 2.6.32 #3
[ 406.289813] Call Trace:
[ 406.289817] [<ffffffff810599e8>] warn_slowpath_common+0x78/0xb0
[ 406.289819] [<ffffffff81059a7c>] warn_slowpath_fmt+0x3c/0x40
[ 406.289822] [<ffffffff81092eb3>] suspend_test_finish+0x83/0x90
[ 406.289824] [<ffffffff81092ae1>] suspend_devices_and_enter+0xb1/0x220
[ 406.289826] [<ffffffff81092d7a>] enter_state+0x12a/0x150
[ 406.289828] [<ffffffff81092391>] state_store+0x91/0x100
[ 406.289831] [<ffffffff8126a957>] kobj_attr_store+0x17/0x20
[ 406.289834] [<ffffffff8117dc70>] sysfs_write_file+0xe0/0x160
[ 406.289836] [<ffffffff81118ce8>] vfs_write+0xb8/0x1a0
[ 406.289838] [<ffffffff81116c18>] ? filp_close+0x58/0x90
[ 406.289840] [<ffffffff8111978c>] sys_write+0x4c/0x80
[ 406.289843] [<ffffffff81011ec2>] system_call_fastpath+0x16/0x1b
[ 406.289844] ---[ end trace 7a7c8001a337e95c ]---
[ 406.290057] PM: Finishing wakeup.
[ 406.290058] Restarting tasks ... done.
[ 406.313243] Aborting journal on device sdc5.
[ 406.313301] journal commit I/O error
[ 406.318748] ext3_abort called.
[ 406.318793] EXT3-fs error (device sdc5): ext3_journal_start_sb: Detected
aborted journal
[ 406.318907] Remounting filesystem read-only
[ 406.377115] sd 3:0:0:0: [sdc] Synchronizing SCSI cache
[ 406.377543] sd 3:0:0:0: [sdc] Stopping disk
[ 406.410829] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#2100332 offset 0
[ 406.413649] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#8716647 offset 0
[ 406.413712] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#8716647 offset 0
[ 406.790299] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10
PQ: 0 ANSI: 5
[ 406.790408] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 406.790502] sd 3:0:0:0: [sdd] 976771055 512-byte logical blocks: (500
GB/465 GiB)
[ 406.790535] sd 3:0:0:0: [sdd] Write Protect is off
[ 406.790537] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 406.790552] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 406.790676] sdd:
[ 406.838755] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671707 offset 0
[ 406.846527] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1703951 offset 0
[ 406.851860] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#7949711 offset 0
[ 406.864289] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671707 offset 0
[ 407.221932] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671707 offset 0
[ 407.222095] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671411 offset 0
[ 407.223168] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#7949711 offset 0
[ 407.224119] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#7949711 offset 0
[ 408.229724] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#7996256 offset 0
[ 408.230823] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671408 offset 0
[ 408.480617] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671707 offset 0
[ 409.383987] sdd2 < sdd5 sdd6 sdd7 > sdd3
[ 409.461329] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 410.097822] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671707 offset 0
[ 410.097894] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671411 offset 0
[ 410.098465] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671411 offset 0
[ 410.098488] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671707 offset 0
[ 417.256286] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671408 offset 0
[ 417.265994] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#7996256 offset 0
[ 417.266011] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#7996256 offset 0
[ 417.316199] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671707 offset 0
[ 417.338127] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671408 offset 0
[ 417.371663] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671707 offset 0
[ 417.453656] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671663 offset 0
[ 417.453676] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671663 offset 0
[ 417.457121] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671663 offset 0
[ 417.457168] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#7949840 offset 0
[ 417.458331] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671663 offset 0
[ 417.458369] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#7949840 offset 0
[ 417.459514] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671663 offset 0
[ 417.459552] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#7949840 offset 0
[ 417.460717] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671663 offset 0
[ 417.460755] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#7949840 offset 0
[ 417.462003] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671663 offset 0
[ 417.462042] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#7949840 offset 0
[ 417.463215] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671663 offset 0
[ 417.463253] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#7949840 offset 0
[ 417.464389] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671663 offset 0
[ 417.464427] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#7949840 offset 0
[ 417.465591] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671663 offset 0
[ 417.465635] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#7949840 offset 0
[ 417.466786] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671663 offset 0
[ 417.466825] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#7949840 offset 0
[ 417.468004] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671663 offset 0
[ 417.468040] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#7949840 offset 0
[ 417.469181] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671663 offset 0
[ 417.469219] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#7949840 offset 0
[ 417.470395] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671663 offset 0
[ 417.470440] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#7949840 offset 0
[ 417.471850] EXT3-fs error (device sdc5): ext3_find_entry: reading directory
#1671411 offset 0


-----------------------------------------------------------------------------

This was before I began a disk-io-intenstive task (on / as /home was read-
only) which then froze the machine instantly.


Volker


--
Volker Lanz
http://www.volker-lanz.de


\
 
 \ /
  Last update: 2010-01-14 14:09    [W:0.099 / U:10.400 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site