lkml.org 
[lkml]   [2009]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/3] tracing: make splice_read work when data is sufficient
From
Date
On Thu, 2009-08-27 at 11:02 +0800, Lai Jiangshan wrote:
> If a cpu ring_buffer has some pages which can be consumed,
> but when a piece of the reader page is consumed, splice_read()
> on per_cpu/cpu#/trace_pipe_raw will read nothing.

I'm not sure exactly what you mean here. Could you explain it a little
better. Are you saying that if I consume one entry from the reader page,
splice read will never return anything?

>
> It's a incorrect behavior. A usespace tool which uses
> splice_read() can't work when this situation occurs.
>
> This patch changes the meaning of "full". It's not required
> the reader page is full with data. It's just required
> the reader page is full written/full committed.
>
> So when a piece of data is consumed, the splice_read()
> still works.
>
> Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
> ---
> diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
> index da2c59d..f1e1533 100644
> --- a/kernel/trace/ring_buffer.c
> +++ b/kernel/trace/ring_buffer.c
> @@ -2782,7 +2782,7 @@ rb_update_iter_read_stamp(struct ring_buffer_iter *iter,
> }
>
> static struct buffer_page *
> -rb_get_reader_page(struct ring_buffer_per_cpu *cpu_buffer)
> +rb_get_reader_page(struct ring_buffer_per_cpu *cpu_buffer, int full)
> {
> struct buffer_page *reader = NULL;
> unsigned long flags;
> @@ -2799,20 +2799,20 @@ rb_get_reader_page(struct ring_buffer_per_cpu *cpu_buffer)
> * a case where we will loop three times. There should be no
> * reason to loop four times (that I know of).
> */
> - if (RB_WARN_ON(cpu_buffer, ++nr_loops > 3)) {
> - reader = NULL;

You're removing the setting of NULL to reader. What happens if we loop
more than 3 times. reader will not be NULL.

> + if (RB_WARN_ON(cpu_buffer, ++nr_loops > 3))
> + goto out;
> +
> + if (full && cpu_buffer->commit_page == cpu_buffer->reader_page)
> goto out;

This may have some funny effects. The first time in, if the reader_page
is on the commit page, we return NULL.

If the reader page is not on the commit page, but the reader page has
been read completely, and we hit the "goto again", but now the reader
page contains the commit_page, this will return the reader page with the
commit page.

> - }
>
> reader = cpu_buffer->reader_page;
>
> /* If there's more to read, return this page */
> - if (cpu_buffer->reader_page->read < rb_page_size(reader))
> + if (reader->read < rb_page_size(reader))
> goto out;
>
> /* Never should we have an index greater than the size */
> - if (RB_WARN_ON(cpu_buffer,
> - cpu_buffer->reader_page->read > rb_page_size(reader)))
> + if (RB_WARN_ON(cpu_buffer, reader->read > rb_page_size(reader)))
> goto out;
>
> /* check if we caught up to the tail */
> @@ -2823,6 +2823,7 @@ rb_get_reader_page(struct ring_buffer_per_cpu *cpu_buffer)
> /*
> * Reset the reader page to size zero.
> */
> + cpu_buffer->reader_page->read = 0;

rb_reset_reader_page should handle the read case. Here the reader page
is about to go back into the ring buffer. When we get the new reader
page, we reset read to 0. This isn't needed.

> local_set(&cpu_buffer->reader_page->write, 0);
> local_set(&cpu_buffer->reader_page->entries, 0);
> local_set(&cpu_buffer->reader_page->page->commit, 0);
> @@ -2832,6 +2833,11 @@ rb_get_reader_page(struct ring_buffer_per_cpu *cpu_buffer)
> * Splice the empty reader page into the list around the head.
> */
> reader = rb_set_head_page(cpu_buffer);
> + if (full && cpu_buffer->commit_page == reader) {

I guess this case is to prevent that funny effect I mentioned above,
but...

If we hit this condition, we just changed read to be zero. This can
cause us to reread data that has already been read. That will also kill
the accounting of entries in the buffer, since we will be counting
entries read twice.

> + reader = NULL;
> + goto out;
> + }
> +
> cpu_buffer->reader_page->list.next = reader->list.next;
> cpu_buffer->reader_page->list.prev = reader->list.prev;
>
> @@ -2891,7 +2897,7 @@ static void rb_advance_reader(struct ring_buffer_per_cpu *cpu_buffer)
> struct buffer_page *reader;
> unsigned length;
>
> - reader = rb_get_reader_page(cpu_buffer);
> + reader = rb_get_reader_page(cpu_buffer, 0);
>
> /* This function should not be called when buffer is empty */
> if (RB_WARN_ON(cpu_buffer, !reader))
> @@ -2973,7 +2979,7 @@ rb_buffer_peek(struct ring_buffer *buffer, int cpu, u64 *ts)
> if (RB_WARN_ON(cpu_buffer, ++nr_loops > RB_TIMESTAMPS_PER_PAGE))
> return NULL;
>
> - reader = rb_get_reader_page(cpu_buffer);
> + reader = rb_get_reader_page(cpu_buffer, 0);
> if (!reader)
> return NULL;
>
> @@ -3642,7 +3648,7 @@ int ring_buffer_read_page(struct ring_buffer *buffer,
>
> spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
>
> - reader = rb_get_reader_page(cpu_buffer);
> + reader = rb_get_reader_page(cpu_buffer, full);

I'm not sure exactly what you are trying to do. rb_get_reader_page will
return a page if there's more to read from.

/me is just confused.

-- Steve

> if (!reader)
> goto out_unlock;
>
> @@ -3665,9 +3671,6 @@ int ring_buffer_read_page(struct ring_buffer *buffer,
> unsigned int pos = 0;
> unsigned int size;
>
> - if (full)
> - goto out_unlock;
> -
> if (len > (commit - read))
> len = (commit - read);
>
>
>
>
>
>



\
 
 \ /
  Last update: 2009-09-09 22:55    [W:0.213 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site