lkml.org 
[lkml]   [2009]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/7 RFC] spi-imx: strip down chipselect function to only drive the chipselect
Date
spi_imx_chipselect() made things that should be (and mostly are) done by
spi_imx_setupxfer. Only setting the tx and rx functions was missing.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/spi/spi_imx.c | 50 ++++++++++++++++--------------------------------
1 files changed, 17 insertions(+), 33 deletions(-)

diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 2fec117..89c22ef 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -354,43 +354,14 @@ static int mx1_rx_available(struct spi_imx_data *spi_imx)
static void spi_imx_chipselect(struct spi_device *spi, int is_active)
{
struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
- unsigned int cs = 0;
int gpio = spi_imx->chipselect[spi->chip_select];
- struct spi_imx_config config;
-
- if (spi->mode & SPI_CS_HIGH)
- cs = 1;
+ int active = is_active != BITBANG_CS_INACTIVE;
+ int dev_is_lowactive = !(spi->mode & SPI_CS_HIGH);

- if (is_active == BITBANG_CS_INACTIVE) {
- if (gpio >= 0)
- gpio_set_value(gpio, !cs);
+ if (gpio < 0)
return;
- }
-
- config.bpw = spi->bits_per_word;
- config.speed_hz = spi->max_speed_hz;
- config.mode = spi->mode;
- config.cs = spi_imx->chipselect[spi->chip_select];
-
- spi_imx->config(spi_imx, &config);
-
- /* Initialize the functions for transfer */
- if (config.bpw <= 8) {
- spi_imx->rx = spi_imx_buf_rx_u8;
- spi_imx->tx = spi_imx_buf_tx_u8;
- } else if (config.bpw <= 16) {
- spi_imx->rx = spi_imx_buf_rx_u16;
- spi_imx->tx = spi_imx_buf_tx_u16;
- } else if (config.bpw <= 32) {
- spi_imx->rx = spi_imx_buf_rx_u32;
- spi_imx->tx = spi_imx_buf_tx_u32;
- } else
- BUG();
-
- if (gpio >= 0)
- gpio_set_value(gpio, cs);

- return;
+ gpio_set_value(gpio, dev_is_lowactive ^ active);
}

static void spi_imx_push(struct spi_imx_data *spi_imx)
@@ -451,6 +422,19 @@ static int spi_imx_setupxfer(struct spi_device *spi,
if (!config.speed_hz)
config.speed_hz = spi->max_speed_hz;

+ /* Initialize the functions for transfer */
+ if (config.bpw <= 8) {
+ spi_imx->rx = spi_imx_buf_rx_u8;
+ spi_imx->tx = spi_imx_buf_tx_u8;
+ } else if (config.bpw <= 16) {
+ spi_imx->rx = spi_imx_buf_rx_u16;
+ spi_imx->tx = spi_imx_buf_tx_u16;
+ } else if (config.bpw <= 32) {
+ spi_imx->rx = spi_imx_buf_rx_u32;
+ spi_imx->tx = spi_imx_buf_tx_u32;
+ } else
+ BUG();
+
spi_imx->config(spi_imx, &config);

return 0;
--
1.6.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2009-09-30 21:47    [W:0.037 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site