lkml.org 
[lkml]   [2009]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/3] OMAP UART: Adding support for omap-serial driver.
From
On Tue, Sep 22, 2009 at 11:33 PM, Tony Lindgren <tony@atomide.com> wrote:
> * Govindraj.R <govindraj.raja@ti.com> [090922 10:06]:
>> From: Govindraj R <govindraj.raja@ti.com>
>>
>> This patch adds support for OMAP3430-HIGH SPEED UART Controller.
>
> Why do you have the same subject anad description is the same for all of them?
>
>> --- a/drivers/serial/Kconfig
>> +++ b/drivers/serial/Kconfig
>> @@ -1359,6 +1359,98 @@ config SERIAL_OF_PLATFORM
>>         Currently, only 8250 compatible ports are supported, but
>>         others can easily be added.
>>
>> +config SERIAL_OMAP
>> +     bool "OMAP serial port support"
>> +     depends on ARM && ARCH_OMAP
>> +     select SERIAL_CORE
>> +     help
>> +     If you have a machine based on an Texas Instruments OMAP CPU you
>> +     can enable its onboard serial ports by enabling this option.
>> +
>> +config SERIAL_OMAP_CONSOLE
>> +     bool "Console on OMAP serial port"
>> +     depends on SERIAL_OMAP
>> +     select SERIAL_CORE_CONSOLE
>> +     help
>> +     If you have enabled the serial port on the Texas Instruments OMAP
>> +     CPU you can make it the console by answering Y to this option.
>> +
>> +     Even if you say Y here, the currently visible virtual console
>> +     (/dev/tty0) will still be used as the system console by default, but
>> +     you can alter that using a kernel command line option such as
>> +     "console=ttyS0". (Try "man bootparam" or see the documentation of
>> +     your boot loader (lilo or loadlin) about how to pass options to the
>> +     kernel at boot time.)
>> +
>> +config SERIAL_OMAP_DMA_UART1
>> +     bool "UART1 DMA support"
>> +     depends on SERIAL_OMAP
>> +     help
>> +     If you have enabled the serial port on the Texas Instruments OMAP
>> +     CPU you can enable the DMA transfer on UART 1 by answering
>> +      to this option.
>> +
>
> Didn't I already comment these options should be passed in platform_data
> from board-*.c files?
>

Will resend PATCH v1 incorporating SERIAL_OMAP_UARTx_RXDMA_BUFSIZE
and SERIAL_OMAP_UARTx_RXDMA_BUFSIZE values into platform data and will
clean up in Kconfig.

Thanks for your review comments.

---
Regards,
Govindraj.R
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2009-09-24 09:19    [W:0.063 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site