lkml.org 
[lkml]   [2009]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: 2.6.31-07068-g43c1266 Early boot exception
Hello,

Tony Vroon wrote:
> Patch applied, no additional output visible:
> OAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
> Using ACPI (MADT) for SMP configuration information
> ACPI: HPET id: 0x10de8201 base: 0xfed00000
> SMP: allowing 12 CPUs, 0 hotplug CPUs
> Allocating PCI resources starting at b00000000 (gap:b0000000:30000000)
> NR_CPUS: 12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:2
> PERCPU: Embedded 23 pages/cpu @ffff880028200000 s73688 r0 d20520 u26214
> PANIC: early exception 06 rip 10:ffffffff81598250 error 0 cr2 d0fff6
> Pid: 0, comm: swapper Not tainted 2.6.31-07068-g43c266-dirty #1
> Call Trace:
> [<ffffffff815719b5>] early_idt_handler+0x55/0x68
> [<ffffffff81587259>] ? pcpu_setup_first_chunk+0x40b/0x703
> [<ffffffff81587273>] ? pcpu_setup_first_chunk+0x427/0x703
> [<ffffffff81587a78>] pcpu_embed_first_chunk+0x1fd/0x261
> [<ffffffff8158a927>] ? pcpu_fc_alloc+0x0/0xac
> [<ffffffff8157a908>] ? pcpu_fc_free+0x0/0x1f
> [<ffffffff8157a749>] setup_per_cpu_areas+0x65/0x219
> [<ffffffff815721ff>] start_kernel+0x124/0x2c5
> [<ffffffff81571a92>] x86_64_start_reservations+0x82/0x86
> [<ffffffff81571b7a>] x86_64_start_kernel+0xe4/0xeb
> RIP pcpu_setup_first_chunk+0x40d/0x703

I'm a bit confused by the panic message. The PANIC line says rip is
0xffffffff81598250 which is arch/x86/pci/amd_bus.c:315 which is in the
middle of early_fill_mp_bus_info() which happens way later during
initialization while the call stack shows pcpu_embed_first_chunk()
just called pcpu_setup_first_chunk. You sure this is the right image?
Anyways, the last line "RIP pcpu_setup_first_chunk+0x40d/0x703"
combined with the exception number (#UD) indicates that it's probably
line 1635 in percpu.c.

Can you please apply the following patch and report the failing log?
Specifying earlyprintk=vga (or something like
earlyprintk=ttyS0,115200) should show you how pcpu initialization is
failing.

Thanks.

diff --git a/mm/percpu.c b/mm/percpu.c
index 43d8cac..d9a636f 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -1631,8 +1631,18 @@ int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai,
pcpu_last_unit_cpu = cpu;
pcpu_nr_units = unit;

- for_each_possible_cpu(cpu)
- BUG_ON(unit_map[cpu] == NR_CPUS);
+ for_each_possible_cpu(cpu) {
+ static char cpus[4096] __initdata;
+
+ if (unit_map[cpu] != NR_CPUS)
+ continue;
+
+ printk(KERN_CRIT "PERCPU: unit missing for cpu%d\n", cpu);
+ cpumask_scnprintf(cpus, sizeof(cpus), cpu_possible_mask);
+ printk(KERN_CRIT "PERCPU: cpu_possible_mask=%s\n", cpus);
+ pcpu_dump_alloc_info(KERN_CRIT, ai);
+ BUG();
+ }

pcpu_nr_groups = ai->nr_groups;
pcpu_group_offsets = group_offsets;

--
tejun


\
 
 \ /
  Last update: 2009-09-24 02:09    [W:0.090 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site