lkml.org 
[lkml]   [2009]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 16/16] vfs: Remove generic_osync_inode() and sync_page_range{_nolock}()
Date
Remove these three functions since nobody uses them anymore.

Signed-off-by: Jan Kara <jack@suse.cz>
---
fs/fs-writeback.c | 54 --------------------------------------
include/linux/fs.h | 5 ---
include/linux/writeback.h | 4 ---
mm/filemap.c | 64 ---------------------------------------------
4 files changed, 0 insertions(+), 127 deletions(-)
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index c54226b..d8dbef0 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -737,57 +737,3 @@ int sync_inode(struct inode *inode, struct writeback_control *wbc)
return ret;
}
EXPORT_SYMBOL(sync_inode);
-
-/**
- * generic_osync_inode - flush all dirty data for a given inode to disk
- * @inode: inode to write
- * @mapping: the address_space that should be flushed
- * @what: what to write and wait upon
- *
- * This can be called by file_write functions for files which have the
- * O_SYNC flag set, to flush dirty writes to disk.
- *
- * @what is a bitmask, specifying which part of the inode's data should be
- * written and waited upon.
- *
- * OSYNC_DATA: i_mapping's dirty data
- * OSYNC_METADATA: the buffers at i_mapping->private_list
- * OSYNC_INODE: the inode itself
- */
-
-int generic_osync_inode(struct inode *inode, struct address_space *mapping, int what)
-{
- int err = 0;
- int need_write_inode_now = 0;
- int err2;
-
- if (what & OSYNC_DATA)
- err = filemap_fdatawrite(mapping);
- if (what & (OSYNC_METADATA|OSYNC_DATA)) {
- err2 = sync_mapping_buffers(mapping);
- if (!err)
- err = err2;
- }
- if (what & OSYNC_DATA) {
- err2 = filemap_fdatawait(mapping);
- if (!err)
- err = err2;
- }
-
- spin_lock(&inode_lock);
- if ((inode->i_state & I_DIRTY) &&
- ((what & OSYNC_INODE) || (inode->i_state & I_DIRTY_DATASYNC)))
- need_write_inode_now = 1;
- spin_unlock(&inode_lock);
-
- if (need_write_inode_now) {
- err2 = write_inode_now(inode, 1);
- if (!err)
- err = err2;
- }
- else
- inode_sync_wait(inode);
-
- return err;
-}
-EXPORT_SYMBOL(generic_osync_inode);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 18acaec..8ae3a07 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1458,11 +1458,6 @@ int fiemap_check_flags(struct fiemap_extent_info *fieinfo, u32 fs_flags);
#define DT_SOCK 12
#define DT_WHT 14

-#define OSYNC_METADATA (1<<0)
-#define OSYNC_DATA (1<<1)
-#define OSYNC_INODE (1<<2)
-int generic_osync_inode(struct inode *, struct address_space *, int);
-
/*
* This is the "filldir" function type, used by readdir() to let
* the kernel specify what kind of dirent layout it wants to have.
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 3224820..1446694 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -157,10 +157,6 @@ int write_cache_pages(struct address_space *mapping,
struct writeback_control *wbc, writepage_t writepage,
void *data);
int do_writepages(struct address_space *mapping, struct writeback_control *wbc);
-int sync_page_range(struct inode *inode, struct address_space *mapping,
- loff_t pos, loff_t count);
-int sync_page_range_nolock(struct inode *inode, struct address_space *mapping,
- loff_t pos, loff_t count);
void set_page_dirty_balance(struct page *page, int page_mkwrite);
void writeback_set_ratelimit(void);

diff --git a/mm/filemap.c b/mm/filemap.c
index 70988a1..854e10e 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -326,70 +326,6 @@ int filemap_fdatawait_range(struct address_space *mapping, loff_t start,
EXPORT_SYMBOL(filemap_fdatawait_range);

/**
- * sync_page_range - write and wait on all pages in the passed range
- * @inode: target inode
- * @mapping: target address_space
- * @pos: beginning offset in pages to write
- * @count: number of bytes to write
- *
- * Write and wait upon all the pages in the passed range. This is a "data
- * integrity" operation. It waits upon in-flight writeout before starting and
- * waiting upon new writeout. If there was an IO error, return it.
- *
- * We need to re-take i_mutex during the generic_osync_inode list walk because
- * it is otherwise livelockable.
- */
-int sync_page_range(struct inode *inode, struct address_space *mapping,
- loff_t pos, loff_t count)
-{
- pgoff_t start = pos >> PAGE_CACHE_SHIFT;
- pgoff_t end = (pos + count - 1) >> PAGE_CACHE_SHIFT;
- int ret;
-
- if (!mapping_cap_writeback_dirty(mapping) || !count)
- return 0;
- ret = filemap_fdatawrite_range(mapping, pos, pos + count - 1);
- if (ret == 0) {
- mutex_lock(&inode->i_mutex);
- ret = generic_osync_inode(inode, mapping, OSYNC_METADATA);
- mutex_unlock(&inode->i_mutex);
- }
- if (ret == 0)
- ret = wait_on_page_writeback_range(mapping, start, end);
- return ret;
-}
-EXPORT_SYMBOL(sync_page_range);
-
-/**
- * sync_page_range_nolock - write & wait on all pages in the passed range without locking
- * @inode: target inode
- * @mapping: target address_space
- * @pos: beginning offset in pages to write
- * @count: number of bytes to write
- *
- * Note: Holding i_mutex across sync_page_range_nolock() is not a good idea
- * as it forces O_SYNC writers to different parts of the same file
- * to be serialised right until io completion.
- */
-int sync_page_range_nolock(struct inode *inode, struct address_space *mapping,
- loff_t pos, loff_t count)
-{
- pgoff_t start = pos >> PAGE_CACHE_SHIFT;
- pgoff_t end = (pos + count - 1) >> PAGE_CACHE_SHIFT;
- int ret;
-
- if (!mapping_cap_writeback_dirty(mapping) || !count)
- return 0;
- ret = filemap_fdatawrite_range(mapping, pos, pos + count - 1);
- if (ret == 0)
- ret = generic_osync_inode(inode, mapping, OSYNC_METADATA);
- if (ret == 0)
- ret = wait_on_page_writeback_range(mapping, start, end);
- return ret;
-}
-EXPORT_SYMBOL(sync_page_range_nolock);
-
-/**
* filemap_fdatawait - wait for all under-writeback pages to complete
* @mapping: address space structure to wait for
*
--
1.6.0.2


\
 
 \ /
  Last update: 2009-09-02 16:05    [from the cache]
©2003-2011 Jasper Spaans