Messages in this thread Patch in this message | | | Date | Wed, 16 Sep 2009 07:26:57 +0200 | From | Markus Trippelsdorf <> | Subject | Re: x86-PAT tree merge causes keyboard problems |
| |
On Tue, Sep 15, 2009 at 03:44:16PM -0700, H. Peter Anvin wrote: > On 09/15/2009 01:52 PM, Markus Trippelsdorf wrote: > > The merge of the PAT tree today breaks certain key combinations of my > > keyboard. For example I switch my virtual desktops with > > ctrl-alt-left/right and this combination stops working. Basically all > > keyboard combinations involving the left alt key are broken on my > > machine as a result of this merge. > > > I bisected this down to: > > > > » > > 335ef896d4c6639849d79367f0fef9abc06d121b is the first bad commit > > commit 335ef896d4c6639849d79367f0fef9abc06d121b > > Author: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> > > Date: Fri Jul 10 09:57:36 2009 -0700 > > > > x86, pat: Add rbtree to do quick lookup in memtype tracking > > I think we have a winner for the second bizarrest bug report I've ever > seen[1]. Not doubting you in any way, just that it is clearly a very > strange combination of things at play here.
Haha, I knew that it would sound ridiculous...
> We need more information about your system, the lspci -vv and dmidecode > output, as well as your entire dmesg, and a dump of > /debug/x86/pat_memtype_list.
OK. I've attached most of those. The Xorg.log is also interesting:
(EE) XKB: Could not invoke xkbcomp (EE) XKB: Couldn't compile keymap (WW) Couldn't load XKB keymap, falling back to pre-XKB keymap
-- Markus 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Subsystem: Advanced Micro Devices [AMD] RS780 Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [c4] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL- Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 3.00 Link Frequency 0: [b] Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [54] HyperTransport: UnitID Clumping Capabilities: [40] HyperTransport: Retry Mode Capabilities: [9c] HyperTransport: #1a Capabilities: [f8] HyperTransport: #1c
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fbd00000-fbefffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] (prog-if 01 [AHCI 1.0]) Subsystem: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at c000 [size=8] Region 1: I/O ports at b000 [size=4] Region 2: I/O ports at a000 [size=8] Region 3: I/O ports at 9000 [size=4] Region 4: I/O ports at 8000 [size=16] Region 5: Memory at fbcffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [70] SATA HBA <?> Kernel driver in use: ahci
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fbcfd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc SB700 USB OHCI1 Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fbcfe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI]) Subsystem: ATI Technologies Inc Device 4397 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fbcff800 (32-bit, non-prefetchable) [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc Device 4398 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fbcfb000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc Device 4399 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fbcfc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI]) Subsystem: ATI Technologies Inc SB700/SB800 USB EHCI Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fbcff400 (32-bit, non-prefetchable) [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a) Subsystem: ATI Technologies Inc SBx00 SMBus Controller Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (prog-if 8a [Master SecP PriP]) Subsystem: ATI Technologies Inc SB700/SB800 IDE Controller Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ff00 [size=16] Capabilities: [70] MSI: Enable- Count=1/2 Maskable- 64bit- Address: 00000000 Data: 0000 Kernel driver in use: pata_atiixp
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller Subsystem: ATI Technologies Inc Device 4383 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fbf00000-fbffffff Prefetchable memory behind bridge: f8000000-f80fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc Device 4396 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fbcfa000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: [b] Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?>
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3300 Graphics (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 834d Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at d000 [size=256] Region 2: Memory at fbee0000 (32-bit, non-prefetchable) [size=64K] Region 5: Memory at fbd00000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000
01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller Subsystem: ATI Technologies Inc RS780 Azalia controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 11 Region 0: Memory at fbefc000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000
02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at e800 [size=256] Region 1: Memory at fbfffc00 (32-bit, non-prefetchable) [size=256] Expansion ROM at f8000000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: r8169
# dmidecode 2.10 SMBIOS 2.5 present. 65 structures occupying 2385 bytes. Table at 0x000F06E0.
Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: American Megatrends Inc. Version: 2001 Release Date: 08/25/2009 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 1024 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Targeted content distribution is supported BIOS Revision: 8.15
Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: System manufacturer Product Name: System Product Name Version: System Version Serial Number: System Serial Number UUID: 8008001E-8C00-01DA-782C-00248C85CBA6 Wake-up Type: Power Switch SKU Number: To Be Filled By O.E.M. Family: To Be Filled By O.E.M.
Handle 0x0002, DMI type 2, 15 bytes Base Board Information Manufacturer: ASUSTeK Computer INC. Product Name: M4A78T-E Version: Rev 1.xx Serial Number: MS1C94B20501111 Asset Tag: To Be Filled By O.E.M. Features: Board is a hosting board Board is replaceable Location In Chassis: To Be Filled By O.E.M. Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0
Handle 0x0003, DMI type 3, 21 bytes Chassis Information Manufacturer: Chassis Manufacture Type: Desktop Lock: Not Present Version: Chassis Version Serial Number: Chassis Serial Number Asset Tag: Asset-1234567890 Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000001 Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0
Handle 0x0004, DMI type 4, 40 bytes Processor Information Socket Designation: AM3 Type: Central Processor Family: <OUT OF SPEC> Manufacturer: AMD ID: 42 0F 10 00 FF FB 8B 17 Version: AMD Phenom(tm) II X4 955 Processor Voltage: 1.5 V External Clock: 200 MHz Max Speed: 3200 MHz Current Speed: 3210 MHz Status: Populated, Enabled Upgrade: Other L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: 0x0007 Serial Number: To Be Filled By O.E.M. Asset Tag: To Be Filled By O.E.M. Part Number: To Be Filled By O.E.M. Core Count: 4 Core Enabled: 4 Thread Count: 4 Characteristics: 64-bit capable
Handle 0x0005, DMI type 7, 19 bytes Cache Information Socket Designation: L1-Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Varies With Memory Address Location: Internal Installed Size: 512 kB Maximum Size: 512 kB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Data Associativity: 4-way Set-associative
Handle 0x0006, DMI type 7, 19 bytes Cache Information Socket Designation: L2-Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Varies With Memory Address Location: Internal Installed Size: 2048 kB Maximum Size: 2048 kB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: 4-way Set-associative
Handle 0x0007, DMI type 7, 19 bytes Cache Information Socket Designation: L3-Cache Configuration: Enabled, Not Socketed, Level 3 Operational Mode: Varies With Memory Address Location: Internal Installed Size: 6144 kB Maximum Size: 6144 kB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: 4-way Set-associative
Handle 0x0008, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PS/2 Internal Connector Type: None External Reference Designator: Keyboard External Connector Type: PS/2 Port Type: Keyboard Port
Handle 0x0009, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: USB12 Internal Connector Type: None External Reference Designator: USB12 External Connector Type: Access Bus (USB) Port Type: USB
Handle 0x000A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: USB34 Internal Connector Type: None External Reference Designator: USB34 External Connector Type: Access Bus (USB) Port Type: USB
Handle 0x000B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: On Board VGA Internal Connector Type: None External Reference Designator: On Board VGA External Connector Type: DB-15 female Port Type: Video Port
Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: LAN1 Internal Connector Type: None External Reference Designator: LAN1 External Connector Type: RJ-45 Port Type: Network Port
Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SPDIF_O1 Internal Connector Type: None External Reference Designator: SPDIF_O1 External Connector Type: Mini Jack (headphones) Port Type: Audio Port
Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: HDMI Internal Connector Type: None External Reference Designator: HDMI External Connector Type: Other Port Type: Audio Port
Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Line In Internal Connector Type: None External Reference Designator: Line In External Connector Type: Mini Jack (headphones) Port Type: Audio Port
Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Line Out Internal Connector Type: None External Reference Designator: Line Out External Connector Type: Mini Jack (headphones) Port Type: Audio Port
Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Mic In Internal Connector Type: None External Reference Designator: Mic In External Connector Type: Mini Jack (headphones) Port Type: Audio Port
Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Center Out Internal Connector Type: None External Reference Designator: Center Out External Connector Type: Mini Jack (headphones) Port Type: Audio Port
Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Surround Out Internal Connector Type: None External Reference Designator: Surround Out External Connector Type: Mini Jack (headphones) Port Type: Audio Port
Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Side Surround Internal Connector Type: None External Reference Designator: Side Surround Out External Connector Type: Mini Jack (headphones) Port Type: Audio Port
Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: MAIN POWER Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other
Handle 0x0016, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: CPU_FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other
Handle 0x0017, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: CHA_FAN1 Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other
Handle 0x0018, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: CHA_FAN2 Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other
Handle 0x0019, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: USB56 Internal Connector Type: Access Bus (USB) External Reference Designator: Not Specified External Connector Type: None Port Type: USB
Handle 0x001A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: USB78 Internal Connector Type: Access Bus (USB) External Reference Designator: Not Specified External Connector Type: None Port Type: USB
Handle 0x001B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: USB910 Internal Connector Type: Access Bus (USB) External Reference Designator: Not Specified External Connector Type: None Port Type: USB
Handle 0x001C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: USB1112 Internal Connector Type: Access Bus (USB) External Reference Designator: Not Specified External Connector Type: None Port Type: USB
Handle 0x001D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SATA1 Internal Connector Type: SAS/SATA Plug Receptacle External Reference Designator: Not Specified External Connector Type: None Port Type: SATA
Handle 0x001E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SATA2 Internal Connector Type: SAS/SATA Plug Receptacle External Reference Designator: Not Specified External Connector Type: None Port Type: SATA
Handle 0x001F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SATA3 Internal Connector Type: SAS/SATA Plug Receptacle External Reference Designator: Not Specified External Connector Type: None Port Type: SATA
Handle 0x0020, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SATA4 Internal Connector Type: SAS/SATA Plug Receptacle External Reference Designator: Not Specified External Connector Type: None Port Type: SATA
Handle 0x0021, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SATA5 Internal Connector Type: SAS/SATA Plug Receptacle External Reference Designator: Not Specified External Connector Type: None Port Type: SATA
Handle 0x0022, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: ESATA Internal Connector Type: SAS/SATA Plug Receptacle External Reference Designator: Not Specified External Connector Type: None Port Type: SATA
Handle 0x0023, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: CDIN Internal Connector Type: On Board Sound Input From CD-ROM External Reference Designator: Not Specified External Connector Type: None Port Type: Audio Port
Handle 0x0024, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: AAFP Internal Connector Type: Mini Jack (headphones) External Reference Designator: Not Specified External Connector Type: None Port Type: Audio Port
Handle 0x0025, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SPDIF_OUT Internal Connector Type: Mini Jack (headphones) External Reference Designator: Not Specified External Connector Type: None Port Type: Audio Port
Handle 0x0026, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: COM1 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: Not Specified External Connector Type: None Port Type: Other
Handle 0x0027, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PRI_IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other
Handle 0x0028, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: FLOPPY Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: Other
Handle 0x0029, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PANEL Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other
Handle 0x002A, DMI type 9, 13 bytes System Slot Information Designation: PCIEX16_1 Type: x16 PCI Express Current Usage: In Use Length: Short ID: 2 Characteristics: 3.3 V is provided Opening is shared PME signal is supported
Handle 0x002B, DMI type 9, 13 bytes System Slot Information Designation: PCIEX16_2 Type: x16 PCI Express Current Usage: Available Length: Short ID: 2 Characteristics: 3.3 V is provided Opening is shared PME signal is supported
Handle 0x002C, DMI type 9, 13 bytes System Slot Information Designation: PCIEX1_1 Type: x1 PCI Express Current Usage: Available Length: Short ID: 4 Characteristics: 3.3 V is provided Opening is shared PME signal is supported
Handle 0x002D, DMI type 9, 13 bytes System Slot Information Designation: PCIEX1_2 Type: x1 PCI Express Current Usage: Available Length: Short ID: 5 Characteristics: 3.3 V is provided Opening is shared PME signal is supported
Handle 0x002E, DMI type 9, 13 bytes System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: In Use Length: Short ID: 13 Characteristics: 3.3 V is provided Opening is shared PME signal is supported
Handle 0x002F, DMI type 9, 13 bytes System Slot Information Designation: PCI2 Type: 32-bit PCI Current Usage: Available Length: Short ID: 14 Characteristics: 3.3 V is provided Opening is shared PME signal is supported
Handle 0x0030, DMI type 10, 6 bytes On Board Device Information Type: Video Status: Enabled Description: To Be Filled By O.E.M.
Handle 0x0031, DMI type 11, 5 bytes OEM Strings String 1: 00248C85CBA6 String 2: To Be Filled By O.E.M. String 3: To Be Filled By O.E.M. String 4: To Be Filled By O.E.M.
Handle 0x0032, DMI type 13, 22 bytes BIOS Language Information Installable Languages: 1 en|US|iso8859-1 Currently Installed Language: en|US|iso8859-1
Handle 0x0033, DMI type 15, 35 bytes System Event Log Area Length: 4 bytes Header Start Offset: 0x0000 Header Length: 2 bytes Data Start Offset: 0x0002 Access Method: Indexed I/O, one 16-bit index port, one 8-bit data port Access Address: Index 0x046A, Data 0x046C Status: Invalid, Not Full Change Token: 0x00000000 Header Format: No Header Supported Log Type Descriptors: 6 Descriptor 1: End of log Data Format 1: OEM-specific Descriptor 2: End of log Data Format 2: OEM-specific Descriptor 3: End of log Data Format 3: OEM-specific Descriptor 4: End of log Data Format 4: OEM-specific Descriptor 5: End of log Data Format 5: OEM-specific Descriptor 6: End of log Data Format 6: OEM-specific
Handle 0x0034, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 8 GB Error Information Handle: Not Provided Number Of Devices: 4
Handle 0x0035, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0019FFFFFFF Range Size: 6656 MB Physical Array Handle: 0x0034 Partition Width: 0
Handle 0x0036, DMI type 17, 27 bytes Memory Device Array Handle: 0x0034 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: DIMM0 Bank Locator: BANK0 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: Manufacturer00 Serial Number: SerNum00 Asset Tag: AssetTagNum0 Part Number: ModulePartNumber00
Handle 0x0037, DMI type 126, 19 bytes Inactive
Handle 0x0038, DMI type 17, 27 bytes Memory Device Array Handle: 0x0034 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: None Locator: DIMM1 Bank Locator: BANK1 Type: DDR Type Detail: Synchronous Speed: 1333 MHz Manufacturer: Manufacturer01 Serial Number: SerNum01 Asset Tag: AssetTagNum1 Part Number: ModulePartNumber01
Handle 0x0039, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Device Handle: 0x0038 Memory Array Mapped Address Handle: 0x0035 Partition Row Position: 1
Handle 0x003A, DMI type 17, 27 bytes Memory Device Array Handle: 0x0034 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: None Locator: DIMM2 Bank Locator: BANK2 Type: DDR Type Detail: Synchronous Speed: 1333 MHz Manufacturer: Manufacturer02 Serial Number: SerNum02 Asset Tag: AssetTagNum2 Part Number: ModulePartNumber02
Handle 0x003B, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00080000000 Ending Address: 0x000FFFFFFFF Range Size: 2 GB Physical Device Handle: 0x003A Memory Array Mapped Address Handle: 0x0035 Partition Row Position: 1
Handle 0x003C, DMI type 17, 27 bytes Memory Device Array Handle: 0x0034 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: None Locator: DIMM3 Bank Locator: BANK3 Type: DDR Type Detail: Synchronous Speed: 1333 MHz Manufacturer: Manufacturer03 Serial Number: SerNum03 Asset Tag: AssetTagNum3 Part Number: ModulePartNumber03
Handle 0x003D, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00100000000 Ending Address: 0x0017FFFFFFF Range Size: 2 GB Physical Device Handle: 0x003C Memory Array Mapped Address Handle: 0x0035 Partition Row Position: 1
Handle 0x003E, DMI type 32, 20 bytes System Boot Information Status: No errors detected
Handle 0x003F, DMI type 139, 94 bytes OEM-specific Type Header and Data: 8B 5E 3F 00 00 1E 8C 00 01 DA 78 2C 04 04 32 55 F8 00 A2 02 A1 00 40 63 43 10 84 83 03 DF 40 80 00 20 00 73 3C 10 08 00 60 0F 43 10 15 04 20 00 3C 10 00 00 00 43 10 00 00 00 00 00 00 00 00 00 00 00 00 00 2C 78 DA FF FF 8C 1E 00 04 00 00 23 33 00 00 00 00 00 00 00 00 00 00 00 00 01 Strings: V1394GUID
Handle 0x0040, DMI type 127, 4 bytes End Of Table
--- /var/log/Xorg.0.log.old 2009-09-16 07:05:14.000000000 +0200 +++ /var/log/Xorg.0.log 2009-09-16 07:05:50.000000000 +0200 @@ -11,7 +11,7 @@ Release Date: 2009-8-25 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.31-04082-g1824090 x86_64 -Current Operating System: Linux phenom2.trippelsdorf.de 2.6.31-04548-gc789ee1 #14 SMP Tue Sep 15 22:26:19 CEST 2009 x86_64 +Current Operating System: Linux phenom2.trippelsdorf.de 2.6.31-04547-g0cb583f #15 SMP Wed Sep 16 07:04:49 CEST 2009 x86_64 Build Date: 15 September 2009 01:42:19PM Before reporting problems, check http://wiki.x.org @@ -19,7 +19,7 @@ Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. -(==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 15 22:27:01 2009 +(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 16 07:05:48 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) @@ -723,16 +723,16 @@ (II) RADEON(0): [drm] installed DRM signal handler (II) RADEON(0): [pci] 32768 kB allocated with handle 0x006ea900 (II) RADEON(0): [pci] ring handle = 0x2b800000 -(II) RADEON(0): [pci] Ring mapped at 0x7f93a7711000 +(II) RADEON(0): [pci] Ring mapped at 0x7fab1c81b000 (II) RADEON(0): [pci] Ring contents 0x00000000 (II) RADEON(0): [pci] ring read ptr handle = 0x1b7ff000 -(II) RADEON(0): [pci] Ring read ptr mapped at 0x7f93b3d47000 +(II) RADEON(0): [pci] Ring read ptr mapped at 0x7fab28e51000 (II) RADEON(0): [pci] Ring read ptr contents 0x00000000 (II) RADEON(0): [pci] vertex/indirect buffers handle = 0x2b801000 -(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x7f93a7511000 +(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x7fab1c61b000 (II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000 (II) RADEON(0): [pci] GART texture map handle = 0x2b802000 -(II) RADEON(0): [pci] GART Texture map mapped at 0x7f93a5891000 +(II) RADEON(0): [pci] GART Texture map mapped at 0x7fab1a99b000 (II) RADEON(0): [drm] register handle = 0x2fff8000 (II) RADEON(0): [dri] Visual configs initialized (II) RADEON(0): RADEONRestoreMemMapRegisters() : @@ -870,6 +870,9 @@ (II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) RADEON(0): Setting screen physical size to 434 x 270 +(EE) XKB: Could not invoke xkbcomp +(EE) XKB: Couldn't compile keymap +(WW) Couldn't load XKB keymap, falling back to pre-XKB keymap (**) Option "CorePointer" (**) Mouse1: always reports core events (**) Mouse1: Device: "/dev/input/by-id/usb-Logitech_USB_Receiver-event-mouse" @@ -899,7 +902,12 @@ (**) Option "CustomKeycodes" "off" (**) Keyboard1: CustomKeycodes disabled (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD) +(EE) XKB: Could not invoke xkbcomp +(EE) XKB: Couldn't compile keymap +(WW) Couldn't load XKB keymap, falling back to pre-XKB keymap (II) RADEON(0): Power Mode Switch +(EE) XKB: Could not invoke xkbcomp +(EE) XKB: Couldn't compile keymap (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0 Dac detection success (II) RADEON(0): EDID vendor "GSM", prod id 20040Linux version 2.6.31-04547-g0cb583f (markus@phenom2.trippelsdorf.de) (gcc version 4.4.1 (Gentoo 4.4.1) ) #15 SMP Wed Sep 16 07:04:49 CEST 2009 Command line: BOOT_IMAGE=/boot/kernel___ root=/dev/sdb vga=0x323 fbcon=rotate:3 quiet KERNEL supported cpus: AMD AuthenticAMD BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dff90000 (usable) BIOS-e820: 00000000dff90000 - 00000000dffa8000 (ACPI data) BIOS-e820: 00000000dffa8000 - 00000000dffd0000 (ACPI NVS) BIOS-e820: 00000000dffd0000 - 00000000e0000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 00000001a0000000 (usable) DMI present. last_pfn = 0x1a0000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000C0000000 mask FFFFE0000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 00000001a0000000 aka 6656M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xdff90 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000dff90000 0000000000 - 00c0000000 page 1G 00c0000000 - 00dfe00000 page 2M 00dfe00000 - 00dff90000 page 4k kernel direct mapping tables up to dff90000 @ 8000-b000 init_memory_mapping: 0000000100000000-00000001a0000000 0100000000 - 0180000000 page 1G 0180000000 - 01a0000000 page 2M kernel direct mapping tables up to 1a0000000 @ a000-c000 ACPI: RSDP 00000000000fb8b0 00024 (v02 ACPIAM) ACPI: XSDT 00000000dff90100 00054 (v01 082509 XSDT1841 20090825 MSFT 00000097) ACPI: FACP 00000000dff90290 000F4 (v03 082509 FACP1841 20090825 MSFT 00000097) ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 20090521 tbfadt-558 ACPI: DSDT 00000000dff90440 0E73F (v01 A1152 A1152000 00000000 INTL 20060113) ACPI: FACS 00000000dffa8000 00040 ACPI: APIC 00000000dff90390 0006C (v01 082509 APIC1841 20090825 MSFT 00000097) ACPI: MCFG 00000000dff90400 0003C (v01 082509 OEMMCFG 20090825 MSFT 00000097) ACPI: OEMB 00000000dffa8040 00072 (v01 082509 OEMB1841 20090825 MSFT 00000097) ACPI: HPET 00000000dff9f440 00038 (v01 082509 OEMHPET 20090825 MSFT 00000097) ACPI: SSDT 00000000dff9f480 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 01a0000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 00015522dc] TEXT DATA BSS ==> [0001000000 - 00015522dc] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [0001553000 - 0001553290] BRK ==> [0001553000 - 0001553290] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] #6 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] [ffffea0000000000-ffffea0005bfffff] PMD -> [ffff880028600000-ffff88002dbfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x001a0000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000dff90 0: 0x00100000 -> 0x001a0000 On node 0 totalpages: 1572655 DMA zone: 56 pages used for memmap DMA zone: 102 pages reserved DMA zone: 3841 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 899016 pages, LIFO batch:31 Normal zone: 8960 pages used for memmap Normal zone: 646400 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8300 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at e0000000 (gap: e0000000:1ff00000) NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 24 pages/cpu @ffff880028200000 s75936 r0 d22368 u524288 pcpu-alloc: s75936 r0 d22368 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1549257 Kernel command line: BOOT_IMAGE=/boot/kernel___ root=/dev/sdb vga=0x323 fbcon=rotate:3 quiet PID hash table entries: 4096 (order: 12, 32768 bytes) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ 20000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 Memory: 6117716k/6815744k available (3336k kernel code, 525124k absent, 172016k reserved, 1443k data, 396k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:384 Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 3210.664 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled hpet clockevent registered HPET: 4 timers in total, 1 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 6421.32 BogoMIPS (lpj=3210660) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks using C1E aware idle routine Performance Counters: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic counters: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose counters: 0 ... counter mask: 000000000000000f Freeing SMP alternatives: 28k freed ACPI: Core revision 20090521 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6421.91 BogoMIPS (lpj=3210958) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02 checking TSC synchronization [CPU#0 -> CPU#1]: passed. System has AMD C1E enabled Switch to broadcast mode on CPU1 Booting processor 2 APIC 0x2 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 6421.91 BogoMIPS (lpj=3210955) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 mce: CPU supports 6 MCE banks CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Switch to broadcast mode on CPU2 Booting processor 3 APIC 0x3 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 6421.89 BogoMIPS (lpj=3210948) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 mce: CPU supports 6 MCE banks CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (25687.04 BogoMIPS). Switch to broadcast mode on CPU3 x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 Switch to broadcast mode on CPU0 NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 00000000e0000000 aka 3584M Fam 10h mmconf [e0000000, efffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [e0000000, efffffff] ==> none node 0 link 0: mmio [f0000000, fbcfffff] node 0 link 0: mmio [fbd00000, fbefffff] node 0 link 0: mmio [fbf00000, ffefffff] TOM2: 00000001a0000000 aka 6656M bus: [00,07] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [f0000000, ffffffff] bus: 00 index 3 mmio: [1a0000000, fcffffffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access PCI: Using configuration type 1 for extended access mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI Warning: Incorrect checksum in table [OEMB] - AA, should be A2 20090521 tbutils-246 ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:11.0: reg 10 io port: [0xc000-0xc007] pci 0000:00:11.0: reg 14 io port: [0xb000-0xb003] pci 0000:00:11.0: reg 18 io port: [0xa000-0xa007] pci 0000:00:11.0: reg 1c io port: [0x9000-0x9003] pci 0000:00:11.0: reg 20 io port: [0x8000-0x800f] pci 0000:00:11.0: reg 24 32bit mmio: [0xfbcffc00-0xfbcfffff] pci 0000:00:11.0: set SATA to AHCI mode pci 0000:00:12.0: reg 10 32bit mmio: [0xfbcfd000-0xfbcfdfff] pci 0000:00:12.1: reg 10 32bit mmio: [0xfbcfe000-0xfbcfefff] pci 0000:00:12.2: reg 10 32bit mmio: [0xfbcff800-0xfbcff8ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10 32bit mmio: [0xfbcfb000-0xfbcfbfff] pci 0000:00:13.1: reg 10 32bit mmio: [0xfbcfc000-0xfbcfcfff] pci 0000:00:13.2: reg 10 32bit mmio: [0xfbcff400-0xfbcff4ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.1: reg 10 io port: [0x00-0x07] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] pci 0000:00:14.5: reg 10 32bit mmio: [0xfbcfa000-0xfbcfafff] pci 0000:01:05.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff] pci 0000:01:05.0: reg 14 io port: [0xd000-0xd0ff] pci 0000:01:05.0: reg 18 32bit mmio: [0xfbee0000-0xfbeeffff] pci 0000:01:05.0: reg 24 32bit mmio: [0xfbd00000-0xfbdfffff] pci 0000:01:05.0: supports D1 D2 pci 0000:01:05.1: reg 10 32bit mmio: [0xfbefc000-0xfbefffff] pci 0000:01:05.1: supports D1 D2 pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] pci 0000:00:01.0: bridge 32bit mmio: [0xfbd00000-0xfbefffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xf0000000-0xf7ffffff] pci 0000:02:05.0: reg 10 io port: [0xe800-0xe8ff] pci 0000:02:05.0: reg 14 32bit mmio: [0xfbfffc00-0xfbfffcff] pci 0000:02:05.0: reg 30 32bit mmio: [0xfbfc0000-0xfbfdffff] pci 0000:02:05.0: supports D1 D2 pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold pci 0000:02:05.0: PME# disabled pci 0000:00:14.4: transparent bridge pci 0000:00:14.4: bridge io port: [0xe000-0xefff] pci 0000:00:14.4: bridge 32bit mmio: [0xfbf00000-0xfbffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *4 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter hpet: hpet2 irq 24 for MSI pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved system 00:08: ioport range 0x4d0-0x4d1 has been reserved system 00:08: ioport range 0x40b-0x40b has been reserved system 00:08: ioport range 0x4d6-0x4d6 has been reserved system 00:08: ioport range 0xc00-0xc01 has been reserved system 00:08: ioport range 0xc14-0xc14 has been reserved system 00:08: ioport range 0xc50-0xc51 has been reserved system 00:08: ioport range 0xc52-0xc52 has been reserved system 00:08: ioport range 0xc6c-0xc6c has been reserved system 00:08: ioport range 0xc6f-0xc6f has been reserved system 00:08: ioport range 0xcd0-0xcd1 has been reserved system 00:08: ioport range 0xcd2-0xcd3 has been reserved system 00:08: ioport range 0xcd4-0xcd5 has been reserved system 00:08: ioport range 0xcd6-0xcd7 has been reserved system 00:08: ioport range 0xcd8-0xcdf has been reserved system 00:08: ioport range 0xb00-0xb3f has been reserved system 00:08: ioport range 0x800-0x89f has been reserved system 00:08: ioport range 0xb00-0xb0f has been reserved system 00:08: ioport range 0xb20-0xb3f has been reserved system 00:08: ioport range 0x900-0x90f has been reserved system 00:08: ioport range 0x910-0x91f has been reserved system 00:08: ioport range 0xfe00-0xfefe has been reserved system 00:08: iomem range 0xffb80000-0xffbfffff has been reserved system 00:08: iomem range 0xfec10000-0xfec1001f has been reserved system 00:0a: ioport range 0x230-0x23f has been reserved system 00:0a: ioport range 0x290-0x29f has been reserved system 00:0a: ioport range 0xf40-0xf4f has been reserved system 00:0a: ioport range 0xa30-0xa3f has been reserved system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved system 00:0c: iomem range 0xc0000-0xcffff has been reserved system 00:0c: iomem range 0xe0000-0xfffff could not be reserved system 00:0c: iomem range 0x100000-0xdfffffff could not be reserved system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved pci 0000:02:05.0: BAR 6: address space collision on of device [0xfbfc0000-0xfbfdffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xd000-0xdfff pci 0000:00:01.0: MEM window: 0xfbd00000-0xfbefffff pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff pci 0000:00:14.4: PCI bridge, secondary bus 0000:02 pci 0000:00:14.4: IO window: 0xe000-0xefff pci 0000:00:14.4: MEM window: 0xfbf00000-0xfbffffff pci 0000:00:14.4: PREFETCH window: 0xf8000000-0xf80fffff pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] pci_bus 0000:01: resource 1 mem: [0xfbd00000-0xfbefffff] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] pci_bus 0000:02: resource 1 mem: [0xfbf00000-0xfbffffff] pci_bus 0000:02: resource 2 pref mem [0xf8000000-0xf80fffff] pci_bus 0000:02: resource 3 io: [0x00-0xffff] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 kvm: Nested Virtualization enabled kvm: Nested Paging enabled Btrfs loaded msgmni has been set to 11950 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:05.0: Boot video device vesafb: framebuffer at 0xf0000000, mapped to 0xffffc90000080000, using 6144k, total 16384k vesafb: mode is 1024x768x32, linelength=4096, pages=4 vesafb: scrolling: redraw vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 Console: switching to colour frame buffer device 96x64 fb0: VESA VGA frame buffer device input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] processor LNXCPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) processor LNXCPU:01: registered as cooling_device1 processor LNXCPU:02: registered as cooling_device2 processor LNXCPU:03: registered as cooling_device3 Real Time Clock Driver v1.12b Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:01:05.0: setting latency timer to 64 [drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0 loop: module loaded ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 irq 22 ata2: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd80 irq 22 ata3: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe00 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe80 irq 22 pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pata_atiixp 0000:00:14.1: setting latency timer to 64 scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 r8169 0000:02:05.0: no PCI Express capability eth0: RTL8110s at 0xffffc9000004ac00, 00:08:54:36:f2:2f, XID 04000000 IRQ 20 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbcff800 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbcff400 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbcfd000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbcfe000 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 0 ata5.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.03, max UDMA/66 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbcfb000 ata5.00: configured for UDMA/66 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbcfc000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbcfa000 ata2: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-8: OCZ-VERTEX, Beta, max UDMA/133 ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA ata3.00: configured for UDMA/133 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice i2c /dev entries driver cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.21. usbcore: registered new interface driver snd-usb-audio ALSA device list: No soundcards found. Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor processors (4 cpu cores) (version 2.20.00) powernow-k8: 0 : pstate 0 (3200 MHz) powernow-k8: 1 : pstate 1 (2500 MHz) powernow-k8: 2 : pstate 2 (2100 MHz) powernow-k8: 3 : pstate 3 (800 MHz) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7 ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 2:0:0:0: Direct-Access ATA OCZ-VERTEX Beta PQ: 0 ANSI: 5 sda: sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: unknown partition table sd 2:0:0:0: [sdb] Attached SCSI disk scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.03 PQ: 0 ANSI: 5 usb 3-1: new low speed USB device using ohci_hcd and address 2 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg2 type 5 sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk usb 3-1: configuration #1 chosen from 1 choice input: HID 046a:0021 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input2 generic-usb 0003:046A:0021.0001: input: USB HID v1.11 Keyboard [HID 046a:0021] on usb-0000:00:12.0-1/input0 input: HID 046a:0021 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input3 generic-usb 0003:046A:0021.0002: input: USB HID v1.11 Device [HID 046a:0021] on usb-0000:00:12.0-1/input1 UDF-fs: No partition found (1) device fsid 8d449d7307e104f3-e9a05c394b7bab5 devid 1 transid 37067 /dev/root Btrfs detected SSD devices, enabling SSD mode VFS: Mounted root (btrfs filesystem) readonly on device 0:11. Freeing unused kernel memory: 396k freed usb 3-2: new full speed USB device using ohci_hcd and address 3 usb 3-2: configuration #1 chosen from 1 choice input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input4 generic-usb 0003:046D:C526.0003: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-2/input0 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input5 generic-usb 0003:046D:C526.0004: input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-2/input1 udev: starting version 145 udev: renamed network interface eth0 to eth1 usb 4-1: new full speed USB device using ohci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice input: C-Media USB Headphone Set as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.3/input/input6 generic-usb 0003:0D8C:000C.0005: input: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:12.1-1/input3 kjournald starting. Commit interval 60 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with writeback data mode. Adding 200804k swap on /dev/sda3. Priority:-1 extents:1 across:200804k r8169: eth1: link up [drm] Setting GART location based on new memory map [drm] Loading RS780/RS880 CP Microcode [drm] Loading RS780/RS880 PFP Microcode [drm] Resetting GPU [drm] writeback test succeeded in 1 usecs X:1861 conflicting memory types f0000000-f8000000 uncached-minus<->write-combining reserve_memtype failed 0xf0000000-0xf8000000, track uncached-minus, req uncached-minus X:1861 conflicting memory types f0000000-f8000000 uncached-minus<->write-combining reserve_memtype failed 0xf0000000-0xf8000000, track uncached-minus, req uncached-minus X:1861 freeing invalid memtype f0000000-f8000000 X:1861 conflicting memory types f0000000-f8000000 uncached-minus<->write-combining reserve_memtype failed 0xf0000000-0xf8000000, track uncached-minus, req uncached-minus X:1861 freeing invalid memtype f0000000-f8000000
| |