lkml.org 
[lkml]   [2009]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] hwmon: Driver for SCSI/ATA temperature sensors
On Sun, 13 Sep 2009 10:04:11 +0200 Rolf Eike Beer <eike@sf-mail.de> wrote:
> Am Sonntag 13 September 2009 01:01:04 schrieb Constantin Baranov:
> > The scsitemp module attaches a device to each SCSI device
> > and registers it in hwmon. Currently the only method of
> > reading temperature is ATA SMART. Adding support of the
> > pure SCSI methods is provided.
>
> That sounds useful. Do you have any nagios rules or something similar around
> that make use of this?

I don't use nagios, thus I have nothing to say about its integration with
scsitemp. However, scsitemp sensors appears under /sys/class/hwmon directory
and are similar to other sensors. GKrellM is able to discover and read
values from scsitemp.

> > + err = scsitemp_execute(st, cdb, values, &len);
> > + if (err)
> > + goto out;
>
> How about directly doing "return err;" here? This would make the label
> superfluous and tthe code a bit more obvious.

Agreed. Also I have removed orphan scsitemp.id field.

---
From: Constantin Baranov <const@mimas.ru>
Date: Sun, 13 Sep 2009 03:34:38 +0500
Subject: [PATCH] hwmon: Driver for SCSI/ATA temperature sensors

The scsitemp module attaches a device to each SCSI device
and registers it in hwmon. Currently the only method of
reading temperature is ATA SMART. Future addition of the
pure SCSI methods is provided.

Signed-off-by: Constantin Baranov <const@mimas.ru>
---
drivers/hwmon/Kconfig | 10 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/scsitemp.c | 262 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 273 insertions(+), 0 deletions(-)
create mode 100644 drivers/hwmon/scsitemp.c

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 2d50166..fb9fd9d 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -692,6 +692,16 @@ config SENSORS_PCF8591
These devices are hard to detect and rarely found on mainstream
hardware. If unsure, say N.

+config SENSORS_SCSITEMP
+ tristate "SCSI/ATA drive temperature sensors"
+ depends on SCSI
+ help
+ If you say yes you get support for SCSI/ATA accessible temperature
+ sensors found on most modern hard drives.
+
+ This driver can also be built as a module. If so, the module
+ will be called scsitemp.
+
config SENSORS_SHT15
tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
depends on GENERIC_GPIO
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index b793dce..8c4c870 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_SENSORS_MAX6650) += max6650.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
+obj-$(CONFIG_SENSORS_SCSITEMP) += scsitemp.o
obj-$(CONFIG_SENSORS_SHT15) += sht15.o
obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o
obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
diff --git a/drivers/hwmon/scsitemp.c b/drivers/hwmon/scsitemp.c
new file mode 100644
index 0000000..8bc21c9
--- /dev/null
+++ b/drivers/hwmon/scsitemp.c
@@ -0,0 +1,262 @@
+/*
+ * scsitemp.c - SCSI/ATA accessible temperature sensors
+ *
+ * TODO:
+ * - LOG SENSE Temperature log page method
+ * - LOG SENSE Informational Exceptions log page method
+ */
+
+#include <linux/ata.h>
+#include <linux/device.h>
+#include <linux/hwmon.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_driver.h>
+
+MODULE_AUTHOR("Constantin Baranov <const@mimas.ru>");
+MODULE_DESCRIPTION("SCSI/ATA temperature monitor");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");
+
+struct scsitemp_method;
+
+struct scsitemp {
+ struct scsi_device *sdev;
+ struct device *hwmon;
+ const struct scsitemp_method *method;
+ struct device dev;
+};
+
+struct scsitemp_method {
+ const char *name;
+ int (*temp_input)(struct scsitemp *st, long *temp);
+};
+
+static int scsitemp_execute(struct scsitemp *st, const u8 *cdb,
+ void *buffer, unsigned *bufflen)
+{
+ int result;
+ int resid;
+
+ result = scsi_execute(st->sdev, cdb, DMA_FROM_DEVICE,
+ buffer, *bufflen, NULL, 1 * HZ, 0, 0, &resid);
+
+ if (result)
+ return -EIO;
+
+ *bufflen -= resid;
+ return 0;
+}
+
+static int scsitemp_ata_temp_input(struct scsitemp *st, long *temp)
+{
+ static const u8 cdb[16] = {
+ ATA_16, 0x08, 0x0e, 0x00,
+ ATA_SMART_READ_VALUES, 0x00, 0x01, 0x00,
+ 0x00, 0x00, ATA_SMART_LBAM_PASS, 0x00,
+ ATA_SMART_LBAH_PASS, 0x00, ATA_CMD_SMART, 0x00,
+ };
+
+ u8 values[512];
+ unsigned len = sizeof(values);
+ unsigned nattrs, i;
+ int err;
+
+ err = scsitemp_execute(st, cdb, values, &len);
+ if (err)
+ return err;
+
+ err = -ENXIO;
+ nattrs = min_t(unsigned, 30, len / 12);
+ for (i = 0; i < nattrs; i++) {
+ u8 *attr = values + i * 12;
+
+ if (attr[2] == 194) {
+ *temp = attr[7] * 1000;
+ err = 0;
+ break;
+ }
+ }
+
+ return err;
+}
+
+static const struct scsitemp_method scsitemp_methods[] = {
+ {"ATA SMART", scsitemp_ata_temp_input},
+ {}
+};
+
+static void scsitemp_assign_method(struct scsitemp *st)
+{
+ const struct scsitemp_method *m;
+
+ for (m = scsitemp_methods; m->temp_input; m++) {
+ long temp;
+
+ if (m->temp_input(st, &temp) == 0) {
+ st->method = m;
+ return;
+ }
+ }
+}
+
+static ssize_t name_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%s\n", dev->class->name);
+}
+
+static ssize_t temp1_input_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scsitemp *st = dev_get_drvdata(dev);
+ long temp;
+ int err;
+
+ err = st->method->temp_input(st, &temp);
+ if (err)
+ return err;
+
+ return sprintf(buf, "%ld\n", temp);
+}
+
+static ssize_t temp1_label_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scsitemp *st = dev_get_drvdata(dev);
+ struct scsi_device *sdev = st->sdev;
+
+ return sprintf(buf, "%.8s %.16s\n", sdev->vendor, sdev->model);
+}
+
+static struct device_attribute scsitemp_attrs[] = {
+ __ATTR_RO(name),
+ __ATTR_RO(temp1_input),
+ __ATTR_RO(temp1_label),
+ __ATTR_NULL,
+};
+
+static struct class scsitemp_class;
+
+static int scsitemp_add(struct device *dev, struct class_interface *intf)
+{
+ struct device *devp = dev->parent;
+ struct scsi_device *sdev = to_scsi_device(devp);
+ struct scsitemp *st;
+ int err;
+
+ st = kzalloc(sizeof(*st), GFP_KERNEL);
+ if (st == NULL) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ st->sdev = sdev;
+ scsitemp_assign_method(st);
+ if (!st->method) {
+ err = -ENODEV;
+ goto out_st;
+ }
+
+ dev_set_name(&st->dev, "%s-%s", scsitemp_class.name, dev_name(devp));
+ st->dev.class = &scsitemp_class;
+ st->dev.parent = devp;
+ dev_set_drvdata(&st->dev, st);
+
+ err = device_register(&st->dev);
+ if (err)
+ goto out_st;
+
+ st->hwmon = hwmon_device_register(&st->dev);
+ if (IS_ERR(st->hwmon)) {
+ err = PTR_ERR(st->hwmon);
+ device_unregister(&st->dev);
+ goto out;
+ }
+
+ dev_info(devp, "found temperature sensor using %s method",
+ st->method->name);
+
+ return 0;
+
+out_st:
+ kfree(st);
+out:
+ return err;
+}
+
+static void scsitemp_device_release(struct device *dev)
+{
+ struct scsitemp *st = dev_get_drvdata(dev);
+
+ kfree(st);
+}
+
+static int scsitemp_match(struct device *dev, void *sdev)
+{
+ struct scsitemp *st = dev_get_drvdata(dev);
+
+ return st->sdev == (struct scsi_device *)sdev;
+}
+
+static void scsitemp_remove(struct device *dev, struct class_interface *intf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev->parent);
+ struct device *stdev;
+ struct scsitemp *st;
+
+ stdev = class_find_device(&scsitemp_class, NULL,
+ sdev, scsitemp_match);
+
+ if (!stdev)
+ return;
+
+ st = dev_get_drvdata(stdev);
+ hwmon_device_unregister(st->hwmon);
+ device_unregister(&st->dev);
+ put_device(&st->dev);
+}
+
+static struct class scsitemp_class = {
+ .name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .dev_attrs = scsitemp_attrs,
+ .dev_release = scsitemp_device_release,
+};
+
+static struct class_interface scsitemp_interface = {
+ .add_dev = scsitemp_add,
+ .remove_dev = scsitemp_remove,
+};
+
+static int __init scsitemp_init(void)
+{
+ int err;
+
+ err = class_register(&scsitemp_class);
+ if (err)
+ goto out;
+
+ err = scsi_register_interface(&scsitemp_interface);
+ if (err)
+ goto out_class;
+
+ return 0;
+
+out_class:
+ class_unregister(&scsitemp_class);
+out:
+ return err;
+}
+
+static void __exit scsitemp_exit(void)
+{
+ scsi_unregister_interface(&scsitemp_interface);
+ class_unregister(&scsitemp_class);
+}
+
+module_init(scsitemp_init);
+module_exit(scsitemp_exit);
--
1.6.4.2


\
 
 \ /
  Last update: 2009-09-13 13:59    [W:0.250 / U:0.564 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site