lkml.org 
[lkml]   [2009]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.31-rc9 kernel BUG and mvsas
On 09/10/2009 07:55 PM, Thomas Fjellstrom wrote:
> On Wed September 9 2009, Thomas Fjellstrom wrote:
>> On Wed September 9 2009, Thomas Fjellstrom wrote:
>>> On Wed September 9 2009, Jeff Garzik wrote:
>>>> On 09/09/2009 12:30 PM, Thomas Fjellstrom wrote:
>>>>> No errors on that disk. Other than the one above, and its more of a
>>>>> warning. However, I just rebooted to add some extra drives, thinking
>>>>> everything was working a little better now that I've updated to
>>>>> 2.6.31-rc9, I'm treated to the following two messages right after
>>>>> boot (and a system lockup to boot):
>>>>>
>>>>> kernel: [ 971.033138] ------------[ cut here ]------------
>>>>> kernel: [ 971.033211] WARNING: at drivers/ata/libata-core.c:4913
>>>>> __ata_qc_complete+0x5a/0xe1 [libata]()
>>>>> kernel: [ 971.033217] Hardware name: GA-MA790FXT-UD5P
>>>>> kernel: [ 971.033221] Modules linked in: powernow_k8
>>>>> cpufreq_conservative cpufreq_stats cpufreq_userspace
>>>>> cpufreq_powersave kvm_amd kvm nfsd exportfs nfs lockd fscache nfs_acl
>>>>> auth_rpcgss sunrpc bridge stp it87 hwmon_vid adt7473 firewire_sbp2
>>>>> loop md_mod
>>>>> snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep
>>>>> snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi
>>>>> snd_seq_midi_event snd_seq snd_timer snd_seq_device snd
>>>>> amd64_edac_mod edac_core i2c_piix4 soundcore snd_page_alloc i2c_core
>>>>> evdev wmi parport_pc button parport processor ext3 jbd mbcache dm_mod
>>>>> sg sr_mod cdrom sd_mod crc_t10dif usbhid ata_generic ide_pci_generic
>>>>> hid mvsas firewire_ohci libsas firewire_core crc_itu_t
>>>>> scsi_transport_sas r8169 atiixp ide_core floppy ahci mii ohci_hcd
>>>>> libata ehci_hcd scsi_mod thermal fan thermal_sys [last unloaded:
>>>>> scsi_wait_scan]
>>>>> kernel: [ 971.033337] Pid: 0, comm: swapper Not tainted 2.6.31-rc9
>>>>> #2 kernel: [ 971.033342] Call Trace:
>>>>> kernel: [ 971.033346]<IRQ> [<ffffffffa00562ca>] ?
>>>>> __ata_qc_complete+0x5a/0xe1 [libata]
>>>>> kernel: [ 971.033434] [<ffffffffa00562ca>] ?
>>>>> __ata_qc_complete+0x5a/0xe1 [libata]
>>>>> kernel: [ 971.033446] [<ffffffff8104aca0>] ?
>>>>> warn_slowpath_common+0x77/0xa3 kernel: [ 971.033455]
>>>>> [<ffffffff81038d06>] ? enqueue_task+0x5c/0x65 kernel: [ 971.033496]
>>>>> [<ffffffffa00562ca>] ? __ata_qc_complete+0x5a/0xe1 [libata]
>>>>> kernel: [ 971.033519] [<ffffffffa00f7b59>] ?
>>>>> sas_ata_task_done+0x178/0x210 [libsas]
>>>>> kernel: [ 971.033528] [<ffffffff8115ead1>] ?
>>>>> blk_run_queue+0x21/0x35 kernel: [ 971.033548] [<ffffffffa010e2ce>]
>>>>> ?
>>>>> mvs_slot_complete+0x3df/0x41b [mvsas]
>>>>> kernel: [ 971.033565] [<ffffffffa010e39c>] ? mvs_int_rx+0x92/0x101
>>>>> [mvsas] kernel: [ 971.033583] [<ffffffffa01112ba>] ?
>>>>> mvs_int_full+0x25/0x88 [mvsas] kernel: [ 971.033600]
>>>>> [<ffffffffa011134e>] ? mvs_64xx_isr+0x31/0x40 [mvsas] kernel: [
>>>>> 971.033617] [<ffffffffa010d0e5>] ? mvs_interrupt+0x61/0x78 [mvsas]
>>>>> kernel: [ 971.033625] [<ffffffff8108aaac>] ?
>>>>> handle_IRQ_event+0x58/0x135 kernel: [ 971.033633]
>>>>> [<ffffffff8108c1a1>] ? handle_fasteoi_irq+0x7d/0xb5 kernel: [
>>>>> 971.033642]
>>>>> [<ffffffff8101388d>] ? handle_irq+0x17/0x1d
>>>>
>>>> That warning is triggered when an ata_queued_cmd is passed to
>>>> completion without the ATA_QCFLAG_ACTIVE flag being set (which
>>>> indicates the qc was started with some activity).
>>>>
>>>> That possibly indicates the low-level driver (or libsas) was passing an
>>>> already-completed cmd to libata.
>>>>
>>>>> The added hard drives are connected to a Supermicro AOC-SASLP-MV8,
>>>>> which is based on a marvel MV64460/64461/64462 chipset, which uses
>>>>> the sata_mv driver.
>>>>
>>>> Surely you mean 'mvsas' driver?
>>>
>>> Yes, sorry I did mean mvsas.
>>>
>>> I am more concerned about the actual oops/BUG rather than the warning
>>> though. Unless the problem causing the warning is also causing the oops.
>>>
>>>> Jeff
>>
>> Thanks for taking a look so far. But I'm having more and more trouble with
>> this card as the days go by:
>>
>> [ 464.792214] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 464.792222] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 494.816170] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 494.816179] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 494.816192] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 494.816197] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 525.817335] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 525.817343] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 525.817358] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 525.817363] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 556.816148] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 556.816157] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 556.816170] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 556.816175] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 587.816171] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 587.816179] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 587.816193] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 587.816199] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 600.616255] INFO: task mount:4395 blocked for more than 120 seconds.
>> [ 600.616263] "echo 0> /proc/sys/kernel/hung_task_timeout_secs" disables
>> this message.
>> [ 600.616270] mount D 0000000000000000 0 4395 4229
>> 0x00000000 [ 600.616281] ffff88012fb6f780 0000000000000082
>> ffff8800b808ddc8 ffff8800b80f3d60
>> [ 600.616290] ffff880128923c90 0000000000014800 000000000000f800
>> ffff88012dd91840
>> [ 600.616299] ffff88012dd91b38 0000000300000008 0000000000000000
>> ffff88010c5bfa88
>> [ 600.616308] Call Trace:
>> [ 600.616324] [<ffffffff81017015>] ? read_tsc+0xa/0x20
>> [ 600.616335] [<ffffffff810adc63>] ? __pagevec_free+0x29/0x3b
>> [ 600.616343] [<ffffffff810661e9>] ? getnstimeofday+0x55/0xaf
>> [ 600.616351] [<ffffffff810a8e69>] ? sync_page+0x0/0x46
>> [ 600.616361] [<ffffffff812dc8cb>] ? io_schedule+0x63/0xa5
>> [ 600.616368] [<ffffffff810a8eaa>] ? sync_page+0x41/0x46
>> [ 600.616376] [<ffffffff812dcade>] ? __wait_on_bit_lock+0x3f/0x84
>> [ 600.616383] [<ffffffff810a8e55>] ? __lock_page+0x5d/0x63
>> [ 600.616391] [<ffffffff8105ef14>] ? wake_bit_function+0x0/0x23
>> [ 600.616401] [<ffffffff810b0ad4>] ? pagevec_lookup+0x17/0x1e
>> [ 600.616408] [<ffffffff810b1bbd>] ?
>> truncate_inode_pages_range+0x288/0x318 [ 600.616418]
>> [<ffffffff810fc8cb>] ? set_blocksize+0xc2/0xd2
>> [ 600.616426] [<ffffffff810fc8f2>] ? sb_set_blocksize+0x17/0x43
>> [ 600.616477] [<ffffffffa04aa8e0>] ? ext4_fill_super+0x1cc/0x2060 [ext4]
>> [ 600.616486] [<ffffffff8117593b>] ? snprintf+0x44/0x4c
>> [ 600.616493] [<ffffffff810fb5b7>] ? check_disk_change+0x22/0x52
>> [ 600.616501] [<ffffffff812dd680>] ? __down_write_nested+0x15/0xab
>> [ 600.616524] [<ffffffff810dbfe6>] ? get_sb_bdev+0x111/0x159
>> [ 600.616571] [<ffffffffa04aa714>] ? ext4_fill_super+0x0/0x2060 [ext4]
>> [ 600.616582] [<ffffffff810dbc44>] ? vfs_kern_mount+0x95/0x111
>> [ 600.616593] [<ffffffff810dbd13>] ? do_kern_mount+0x43/0xe2
>> [ 600.616607] [<ffffffff810ef49d>] ? do_mount+0x767/0x7d6
>> [ 600.616620] [<ffffffff810ef591>] ? sys_mount+0x85/0xc8
>> [ 600.616633] [<ffffffff81010a02>] ? system_call_fastpath+0x16/0x1b
>> [ 618.816175] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 618.816184] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 618.816196] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 618.816201] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 618.816241] sd 1:0:3:0: [sdf] Unhandled error code
>> [ 618.816247] sd 1:0:3:0: [sdf] Result: hostbyte=DID_OK
>> driverbyte=DRIVER_TIMEOUT
>> [ 618.816255] end_request: I/O error, dev sdf, sector 160
>> [ 618.816263] Buffer I/O error on device md2, logical block 20
>> [ 618.816274] Buffer I/O error on device md2, logical block 21
>> [ 618.816280] Buffer I/O error on device md2, logical block 22
>> [ 618.816285] Buffer I/O error on device md2, logical block 23
>> [ 618.816291] Buffer I/O error on device md2, logical block 24
>> [ 618.816298] Buffer I/O error on device md2, logical block 25
>> [ 618.816307] Buffer I/O error on device md2, logical block 26
>> [ 618.816316] Buffer I/O error on device md2, logical block 27
>> [ 618.816324] Buffer I/O error on device md2, logical block 28
>> [ 618.816331] Buffer I/O error on device md2, logical block 29
>> [ 649.780185] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 649.780194] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 649.780208] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 649.780214] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 649.780293] ------------[ cut here ]------------
>> [ 649.780366] WARNING: at drivers/ata/libata-core.c:5129
>> ata_qc_issue+0x10a/0x347 [libata]()
>> [ 649.780373] Hardware name: GA-MA790FXT-UD5P
>> [ 649.780377] Modules linked in: ext4 jbd2 crc16 raid0 powernow_k8
>> cpufreq_conservative cpufreq_stats cpufreq_userspace cpufreq_powersave
>> kvm_amd kvm nfsd exportfs nfs lockd fscache nfs_acl auth_rpcgss sunrpc
>> bridge stp it87 hwmon_vid adt7473 firewire_sbp2 loop md_mod
>> snd_hda_codec_realtek
>> snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm
>> snd_seq_midi snd_rawmidi snd_seq_midi_event amd64_edac_mod snd_seq
>> edac_core snd_timer snd_seq_device snd soundcore i2c_piix4 snd_page_alloc
>> i2c_core evdev parport_pc wmi parport button processor ext3 jbd mbcache
>> dm_mod usbhid hid sg sr_mod cdrom sd_mod crc_t10dif ata_generic
>> ide_pci_generic firewire_ohci firewire_core ohci_hcd crc_itu_t atiixp
>> ide_core mvsas ehci_hcd ahci libsas libata scsi_transport_sas scsi_mod
>> r8169 mii floppy thermal fan thermal_sys [last unloaded: scsi_wait_scan]
>> [ 649.780499] Pid: 3185, comm: hddtemp Not tainted 2.6.31-rc9 #2
>> [ 649.780504] Call Trace:
>> [ 649.780551] [<ffffffffa0074f90>] ? ata_qc_issue+0x10a/0x347 [libata]
>> [ 649.780593] [<ffffffffa0074f90>] ? ata_qc_issue+0x10a/0x347 [libata]
>> [ 649.780607] [<ffffffff8104aca0>] ? warn_slowpath_common+0x77/0xa3
>> [ 649.780649] [<ffffffffa00790ce>] ? ata_scsi_pass_thru+0x0/0x240
>> [libata] [ 649.780690] [<ffffffffa0074f90>] ? ata_qc_issue+0x10a/0x347
>> [libata] [ 649.780733] [<ffffffffa00401d6>] ? scsi_get_command+0x75/0x97
>> [scsi_mod] [ 649.780776] [<ffffffffa00790ce>] ?
>> ata_scsi_pass_thru+0x0/0x240 [libata] [ 649.780815] [<ffffffffa003f7aa>]
>> ? scsi_done+0x0/0xc [scsi_mod] [ 649.780858] [<ffffffffa007a4d5>] ?
>> __ata_scsi_queuecmd+0x185/0x1dc [libata]
>> [ 649.780896] [<ffffffffa003f7aa>] ? scsi_done+0x0/0xc [scsi_mod]
>> [ 649.780918] [<ffffffffa00a3c8e>] ? sas_queuecommand+0x83/0x25d [libsas]
>> [ 649.780956] [<ffffffffa003fa7c>] ? scsi_dispatch_cmd+0x1c0/0x23c
>> [scsi_mod]
>> [ 649.780996] [<ffffffffa0044ff0>] ? scsi_request_fn+0x3a5/0x506
>> [scsi_mod] [ 649.781006] [<ffffffff810546e0>] ? del_timer+0x59/0x62
>> [ 649.781016] [<ffffffff81163b70>] ? blk_execute_rq_nowait+0x65/0x89
>> [ 649.781032] [<ffffffffa014164f>] ? sg_common_write+0x489/0x4ab [sg]
>> [ 649.781042] [<ffffffff8115df56>] ? __freed_request+0x26/0x83
>> [ 649.781056] [<ffffffffa01421da>] ? sg_new_write+0x23e/0x269 [sg]
>> [ 649.781070] [<ffffffffa0142473>] ? sg_ioctl+0x26e/0xb63 [sg]
>> [ 649.781080] [<ffffffff81100f38>] ? inotify_d_instantiate+0x12/0x39
>> [ 649.781088] [<ffffffff8105eee6>] ? autoremove_wake_function+0x0/0x2e
>> [ 649.781098] [<ffffffff810d80bf>] ? fd_install+0x2e/0x5a
>> [ 649.781105] [<ffffffff810e5247>] ? vfs_ioctl+0x56/0x6c
>> [ 649.781111] [<ffffffff810e570a>] ? do_vfs_ioctl+0x437/0x475
>> [ 649.781118] [<ffffffff810e5799>] ? sys_ioctl+0x51/0x70
>> [ 649.781128] [<ffffffff81010a02>] ? system_call_fastpath+0x16/0x1b
>> [ 649.781134] ---[ end trace 9005373b1b9c6eb7 ]---
>> [ 680.781672] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 680.781681] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 711.781672] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 711.781681] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 741.816069] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 741.816078] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 741.816090] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 741.816096] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 772.820160] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 772.820168] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 772.820181] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 772.820186] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 803.816212] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 803.816220] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 803.816233] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
>> [ 803.816239] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
>> [ 803.816264] sd 1:0:3:0: [sdf] Unhandled error code
>> [ 803.816270] sd 1:0:3:0: [sdf] Result: hostbyte=DID_OK
>> driverbyte=DRIVER_TIMEOUT
>> [ 803.816278] end_request: I/O error, dev sdf, sector 512
>> [ 803.816284] __ratelimit: 70 callbacks suppressed
>> [ 803.816290] Buffer I/O error on device md2, logical block 64
>>
>> That's after bringing up a raid0 array I build a few days ago on 4
>> perfectly good (Seagate Baracuda 1TB 7200.12) disks, without the bad disk
>> plugged in. I try to mount it, and the driver hangs. Anything trying to
>> access any of the 4 disks hangs as well.
>>
>> I know this array worked a few days ago. The most major change I've made
>> was upgrade from -rc8 (or -rc5, not sure if I mounted the array under
>> -rc8) to -rc9.
>>
>
> Hi, just wondering if anyone has had a chance to look at this, or if there's
> some patches I should try out, or if you need me to do some testing, I'd be
> glad to, thanks :)

I was hoping that some VM would jump in. The BUG in question is, from
mm/slab.c:

/*
* The slab was either on partial or free list so
* there must be at least one object available for
* allocation.
*/
BUG_ON(slabp->inuse >= cachep->num);

So I wonder if that is a double-free, indicating a bug in
SCSI/libsas/mvsas, or a VM problem of some sort.

Was free memory low on that machine, at that point, perchance?

Jeff





\
 
 \ /
  Last update: 2009-09-13 02:45    [W:0.086 / U:2.092 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site