lkml.org 
[lkml]   [2009]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC] IO scheduler based IO controller V9
Vivek Goyal wrote:
> On Fri, Sep 11, 2009 at 03:16:23PM +0200, Jerome Marchand wrote:
>> Vivek Goyal wrote:
>>> On Thu, Sep 10, 2009 at 04:52:27PM -0400, Vivek Goyal wrote:
>>>> On Thu, Sep 10, 2009 at 05:18:25PM +0200, Jerome Marchand wrote:
>>>>> Vivek Goyal wrote:
>>>>>> Hi All,
>>>>>>
>>>>>> Here is the V9 of the IO controller patches generated on top of 2.6.31-rc7.
>>>>>
>>>>> Hi Vivek,
>>>>>
>>>>> I've run some postgresql benchmarks for io-controller. Tests have been
>>>>> made with 2.6.31-rc6 kernel, without io-controller patches (when
>>>>> relevant) and with io-controller v8 and v9 patches.
>>>>> I set up two instances of the TPC-H database, each running in their
>>>>> own io-cgroup. I ran two clients to these databases and tested on each
>>>>> that simple request:
>>>>> $ select count(*) from LINEITEM;
>>>>> where LINEITEM is the biggest table of TPC-H (6001215 entries,
>>>>> 720MB). That request generates a steady stream of IOs.
>>>>>
>>>>> Time is measure by psql (\timing switched on). Each test is run twice
>>>>> or more if there is any significant difference between the first two
>>>>> runs. Before each run, the cache is flush:
>>>>> $ echo 3 > /proc/sys/vm/drop_caches
>>>>>
>>>>>
>>>>> Results with 2 groups of same io policy (BE) and same io weight (1000):
>>>>>
>>>>> w/o io-scheduler io-scheduler v8 io-scheduler v9
>>>>> first second first second first second
>>>>> DB DB DB DB DB DB
>>>>>
>>>>> CFQ 48.4s 48.4s 48.2s 48.2s 48.1s 48.5s
>>>>> Noop 138.0s 138.0s 48.3s 48.4s 48.5s 48.8s
>>>>> AS 46.3s 47.0s 48.5s 48.7s 48.3s 48.5s
>>>>> Deadl. 137.1s 137.1s 48.2s 48.3s 48.3s 48.5s
>>>>>
>>>>> As you can see, there is no significant difference for CFQ
>>>>> scheduler.
>>>> Thanks Jerome.
>>>>
>>>>> There is big improvement for noop and deadline schedulers
>>>>> (why is that happening?).
>>>> I think because now related IO is in a single queue and it gets to run
>>>> for 100ms or so (like CFQ). So previously, IO from both the instances
>>>> will go into a single queue which should lead to more seeks as requests
>>>> from two groups will kind of get interleaved.
>>>>
>>>> With io controller, both groups have separate queues so requests from
>>>> both the data based instances will not get interleaved (This almost
>>>> becomes like CFQ where ther are separate queues for each io context
>>>> and for sequential reader, one io context gets to run nicely for certain
>>>> ms based on its priority).
>>>>
>>>>> The performance with anticipatory scheduler
>>>>> is a bit lower (~4%).
>>>>>
>>> Hi Jerome,
>>>
>>> Can you also run the AS test with io controller patches and both the
>>> database in root group (basically don't put them in to separate group). I
>>> suspect that this regression might come from that fact that we now have
>>> to switch between queues and in AS we wait for request to finish from
>>> previous queue before next queue is scheduled in and probably that is
>>> slowing down things a bit.., just a wild guess..
>>>
>> Hi Vivek,
>>
>> I guess that's not the reason. I got 46.6s for both DB in root group with
>> io-controller v9 patches. I also rerun the test with DB in different groups
>> and found about the same result as above (48.3s and 48.6s).
>>
>
> Hi Jerome,
>
> Ok, so when both the DB's are in root group (with io-controller V9
> patches), then you get 46.6 seconds time for both the DBs. That means there
> is no regression in this case. In this case there is only one queue of
> root group and AS is running timed read/write batches on this queue.
>
> But when both the DBs are put in separate groups then you get 48.3 and
> 48.6 seconds respectively and we see regression. In this case there are
> two queues belonging to each group. Elevator layer takes care of queue
> group queue switch and AS runs timed read/write batches on these queues.
>
> If it is correct, then it does not exclude the possiblity that it is queue
> switching overhead between groups?

Yes it's correct. I misunderstood you.

Jerome

>
> Thanks
> Vivek



\
 
 \ /
  Last update: 2009-09-11 16:49    [W:0.088 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site