lkml.org 
[lkml]   [2009]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: MD/RAID time out writing superblock
>>>> The drive might take a longer time like this when doing error handling
>>>> (sector remapping, etc), but then I would expect to see your remapped
>>>> sector count grow.
>>>
>>> Yes, this is a possibility and according to the spec, libata EH should
>>> be retrying flushes a few times before giving up but I'm not sure
>>> whether keeping retrying for several minutes is a good idea either.
>>> Is it?
>> ..
>>
>> Libata will retry only when the FLUSH returns an error,
>> and the next FLUSH will continue after the point where
>> the first attempt failed.
>>
>> But if the drive can still auto-relocate sectors, then the
>> first FLUSH won't actually fail.. it will simply take longer
>> than normal.
>>
>> A couple of those, and we're into the tens of seconds range
>> for time.
>>
>> Still, it would be good to actually produce an error like that
>> to examine under controlled circumstances.
>>
>> Hmm.. I had a drive here that gave symptoms like that.
>> Eventually, I discovered that drive had run out of relocatable
>> sectors, too. Mmm.. I'll see if I can get it back (loaned it out)
>> and perhaps we can recreate this specific scenario on it..
> ..
>
> I checked today, and that drive is no longer available.

Mine errored out again with exactly the same symptoms, this time after only
few days and with the "tunable" set to 2 sec. I got a warranty replacement
but haven't shipped this one yet. Let me know if you want it.


\
 
 \ /
  Last update: 2009-09-01 15:09    [W:1.636 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site