lkml.org 
[lkml]   [2009]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: linux-next: reiserfs lockout with xattr ?
Le 08/08/2009 02:27, Frederic Weisbecker a écrit :
> On Wed, Aug 05, 2009 at 08:08:16PM +0200, Laurent Riffard wrote:
>> Hello,
>>
>> From times to times, my desktop freezes when I log in the Gnome Desktop. I'm able to switch to a text console, but I can't login. I must reboot using the magic sysrq keys.
>>
>> Yesterday, I managed to get some logs of this situation:
>
>
> BTW, Im not sure exactly if it happens because of the reiserfs/kill-bkl
> tree.
>
> Could you please try this tree alone?
>
> You can checkout the git tree in:
> git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing.git
>
> Or you can also apply the whole patch against current -rc5:
> http://www.kernel.org/pub/linux/kernel/people/frederic/bench-3107/reis_full.diff
>
> Thanks!
>
> Frederic.

Hello Frederic,

I gave reiserfs/kill-bkl a try an I got the problem too.

# git describe
v2.6.31-rc4-220-g46be1f8
# git log --pretty=oneline
46be1f8ee8d9be0589e41f9684dabd71cd59aa36 kill-the-bkl/reiserfs: release the lock only for first entry in readdir
3ef09eac1a55fab1531785b2600e995f250d2f2a kill-the-bkl/reiserfs: move the concurrent tree accesses checks per superblock
a25771e264f293d954fb9109af312aae424996ef kill-the-bkl/reiserfs: acquire the inode mutex safely
02e2142acaa444a106f5ffb4f2731c7050672a95 kill-the-bkl/reiserfs: unlock only when needed in search_by_key
93deeaf8d866c7ec10abf3293a88e725c6939d24 kill-the-bkl/reiserfs: use mutex_lock in reiserfs_mutex_lock_safe
a937464292c5bc82550e5aa66791ebe57083c822 kill-the-bkl/reiserfs: factorize the locking in reiserfs_write_end()
2c919b668572c7f4e4e9817ac57b2f426962c6cd kill-the-bkl/reiserfs: reduce number of contentions in search_by_key()
369a6ec5aec8621f96283934de9c004443e5026b kill-the-bkl/reiserfs: don't hold the write recursively in reiserfs_lookup()
454fa14529bba7454f4dee0c64479ca50fca21f3 kill-the-bkl/reiserfs: lock only once on reiserfs_get_block()
...

Below is the full dmesg.

Please note I got a "possible circular locking dependency detected" in reiserfs. This warning does happen in linux-next too but it was hidden by another prolem in the log I sent Wednesday.


Inspecting /boot/System.map-2.6.31-rc4-00220-g46be1f8
Cannot find map file.
Loaded 42779 symbols from 68 modules.
[ 0.000000] Linux version 2.6.31-rc4-00220-g46be1f8 (laurent@calimero) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #233 SMP PREEMPT Sat Aug 8 23:20:02 CEST 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] AMD AuthenticAMD
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003bef0000 (usable)
[ 0.000000] BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003c000000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x3bef0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFE0000000 write-back
[ 0.000000] 1 base 0020000000 mask FFF0000000 write-back
[ 0.000000] 2 base 0030000000 mask FFF8000000 write-back
[ 0.000000] 3 base 0038000000 mask FFFC000000 write-back
[ 0.000000] 4 base 003BF00000 mask FFFFF00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 00e00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 7000-d000
[ 0.000000] RAMDISK: 37c1d000 - 37fef20d
[ 0.000000] Allocated new RAMDISK: 00a33000 - 00e0520d
[ 0.000000] Move RAMDISK from 0000000037c1d000 - 0000000037fef20c to 00a33000 - 00e0520c
[ 0.000000] ACPI: RSDP 000f6340 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 3bef3000 00038 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
[ 0.000000] ACPI: FACP 3bef3040 00074 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
[ 0.000000] ACPI: DSDT 3bef30c0 05272 (v01 GBT NVDAACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 3bef1800 00040
[ 0.000000] ACPI: SSDT 3bef8400 0028A (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 3bef86c0 00038 (v01 GBT NVDAACPI 42302E31 NVDA 00000098)
[ 0.000000] ACPI: MCFG 3bef8700 0003C (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
[ 0.000000] ACPI: APIC 3bef8340 0008E (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 68MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] node 0 low ram: 00000000 - 379fe000
[ 0.000000] node 0 bootmap 00009000 - 0000ff40
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000200000 - 0000a2a224] TEXT DATA BSS ==> [0000200000 - 0000a2a224]
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
[ 0.000000] #5 [0000a2b000 - 0000a320f6] BRK ==> [0000a2b000 - 0000a320f6]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [0000a33000 - 0000e0520d] NEW RAMDISK ==> [0000a33000 - 0000e0520d]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] found SMP MP-table at [c00f4970] f4970
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0003bef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003bef0
[ 0.000000] On node 0 totalpages: 245391
[ 0.000000] free_area_init_node: node 0, pgdat c04ddb80, node_mem_map c1000000
[ 0.000000] DMA zone: 52 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3947 pages, LIFO batch:0
[ 0.000000] Normal zone: 2841 pages used for memmap
[ 0.000000] Normal zone: 220901 pages, LIFO batch:31
[ 0.000000] HighMem zone: 225 pages used for memmap
[ 0.000000] HighMem zone: 17425 pages, LIFO batch:3
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:b0000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages at c1c3b000, static data 30468 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 242273
[ 0.000000] Kernel command line: root=/dev/mapper/vglinux1-lv_ubuntu2 ro locale=fr_FR vga=795 resume=/dev/mapper/vglinux1-lvswap
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0003bef0)
[ 0.000000] Memory: 955460k/981952k available (1902k kernel code, 25868k reserved, 1068k data, 304k init, 70600k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc04eb000 - 0xc0537000 ( 304 kB)
[ 0.000000] .data : 0xc03db869 - 0xc04e68b0 (1068 kB)
[ 0.000000] .text : 0xc0200000 - 0xc03db869 (1902 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Preemptible RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] CPU 0 irqstacks, hard=c1c3b000 soft=c1c3c000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2599.813 MHz processor.
[ 0.000035] spurious 8259A interrupt: IRQ7.
[ 0.000355] Console: colour dummy device 80x25
[ 0.000369] console [tty0] enabled
[ 0.001303] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.001315] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.001323] ... MAX_LOCK_DEPTH: 48
[ 0.001331] ... MAX_LOCKDEP_KEYS: 8191
[ 0.001338] ... CLASSHASH_SIZE: 4096
[ 0.001345] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.001353] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.001361] ... CHAINHASH_SIZE: 16384
[ 0.001369] memory used by lock dependency info: 3487 kB
[ 0.001378] per task-struct memory footprint: 1152 bytes
[ 0.001427] kmemleak: Early log buffer exceeded
[ 0.001435] kmemleak: Kernel memory leak detector disabled
[ 0.001684] hpet clockevent registered
[ 0.001693] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.001709] Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.62 BogoMIPS (lpj=10399252)
[ 0.001967] Mount-cache hash table entries: 512
[ 0.002854] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.002867] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.002876] CPU: Physical Processor ID: 0
[ 0.002883] CPU: Processor Core ID: 0
[ 0.002892] mce: CPU supports 5 MCE banks
[ 0.002907] using C1E aware idle routine
[ 0.002929] Checking 'hlt' instruction... OK.
[ 0.016697] ACPI: Core revision 20090521
[ 0.028585] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.069489] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
[ 0.072001] lockdep: fixing up alternatives.
[ 0.072001] CPU 1 irqstacks, hard=c1c4b000 soft=c1c4c000
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5200.05 BogoMIPS (lpj=10400112)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 5 MCE banks
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.156555] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
[ 0.156680] Brought up 2 CPUs
[ 0.156686] Total of 2 processors activated (10399.68 BogoMIPS).
[ 0.156857] khelper used greatest stack depth: 2964 bytes left
[ 0.156857] Booting paravirtualized kernel on bare hardware
[ 0.156857] NET: Registered protocol family 16
[ 0.156857] khelper used greatest stack depth: 2728 bytes left
[ 0.160066] ACPI: bus type pci registered
[ 0.160099] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 31
[ 0.160099] PCI: MCFG area at f0000000 reserved in E820
[ 0.160099] PCI: Using MMCONFIG for extended config space
[ 0.160103] PCI: Using configuration type 1 for base access
[ 0.164234] bio: create slab <bio-0> at 0
[ 0.168811] ACPI: EC: Look up EC in DSDT
[ 0.183271] ACPI: Interpreter enabled
[ 0.183284] ACPI: (supports S0 S3 S4 S5)
[ 0.183359] ACPI: Using IOAPIC for interrupt routing
[ 0.204444] ACPI: No dock devices found.
[ 0.204591] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.204718] pci 0000:00:01.1: reg 10 io port: [0xc800-0xc83f]
[ 0.204718] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
[ 0.204718] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f]
[ 0.204718] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.204718] pci 0000:00:01.1: PME# disabled
[ 0.204718] pci 0000:00:02.0: reg 10 32bit mmio: [0xf700a000-0xf700afff]
[ 0.204718] pci 0000:00:02.0: supports D1 D2
[ 0.204718] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.204718] pci 0000:00:02.0: PME# disabled
[ 0.204718] pci 0000:00:02.1: reg 10 32bit mmio: [0xf700b000-0xf700b0ff]
[ 0.204718] pci 0000:00:02.1: supports D1 D2
[ 0.204718] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.204718] pci 0000:00:02.1: PME# disabled
[ 0.204718] pci 0000:00:04.0: reg 10 32bit mmio: [0xf700c000-0xf700cfff]
[ 0.204718] pci 0000:00:04.0: supports D1 D2
[ 0.204718] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.204718] pci 0000:00:04.0: PME# disabled
[ 0.204739] pci 0000:00:04.1: reg 10 32bit mmio: [0xf7009000-0xf70090ff]
[ 0.204777] pci 0000:00:04.1: supports D1 D2
[ 0.204780] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.204791] pci 0000:00:04.1: PME# disabled
[ 0.204845] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
[ 0.204900] pci 0000:00:07.0: reg 10 32bit mmio: [0xf7000000-0xf7003fff]
[ 0.204939] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.204950] pci 0000:00:07.0: PME# disabled
[ 0.205047] pci 0000:00:09.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.205052] pci 0000:00:09.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.205057] pci 0000:00:09.0: reg 18 io port: [0x970-0x977]
[ 0.205062] pci 0000:00:09.0: reg 1c io port: [0xb70-0xb73]
[ 0.205067] pci 0000:00:09.0: reg 20 io port: [0xdc00-0xdc0f]
[ 0.205072] pci 0000:00:09.0: reg 24 32bit mmio: [0xf7004000-0xf7005fff]
[ 0.205140] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf7006000-0xf7006fff]
[ 0.205145] pci 0000:00:0a.0: reg 14 io port: [0xe000-0xe007]
[ 0.205150] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf7007000-0xf70070ff]
[ 0.205156] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf7008000-0xf700800f]
[ 0.205185] pci 0000:00:0a.0: supports D1 D2
[ 0.205187] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.205200] pci 0000:00:0a.0: PME# disabled
[ 0.205252] pci 0000:00:12.0: reg 10 32bit mmio: [0xf2000000-0xf2ffffff]
[ 0.205259] pci 0000:00:12.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
[ 0.205266] pci 0000:00:12.0: reg 1c 64bit mmio: [0xf5000000-0xf5ffffff]
[ 0.205273] pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.205472] pci 0000:01:07.0: reg 10 io port: [0xa000-0xa007]
[ 0.205479] pci 0000:01:07.0: reg 14 io port: [0xa400-0xa403]
[ 0.205485] pci 0000:01:07.0: reg 18 io port: [0xa800-0xa807]
[ 0.205492] pci 0000:01:07.0: reg 1c io port: [0xac00-0xac03]
[ 0.205499] pci 0000:01:07.0: reg 20 io port: [0xb000-0xb00f]
[ 0.205506] pci 0000:01:07.0: reg 24 32bit mmio: [0xf4000000-0xf40000ff]
[ 0.205512] pci 0000:01:07.0: reg 30 32bit mmio: [0x000000-0x07ffff]
[ 0.205530] pci 0000:01:07.0: supports D1 D2
[ 0.205567] pci 0000:00:08.0: transparent bridge
[ 0.205577] pci 0000:00:08.0: bridge io port: [0xa000-0xbfff]
[ 0.205581] pci 0000:00:08.0: bridge 32bit mmio: [0xf3000000-0xf4ffffff]
[ 0.205589] pci_bus 0000:00: on NUMA node 0
[ 0.205595] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.206297] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.272452] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.272452] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)
[ 0.272616] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.272807] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.272998] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.273190] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.273397] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.273588] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.273779] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.273974] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
[ 0.274165] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
[ 0.274355] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[ 0.274546] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 *11 14 15)
[ 0.274737] ACPI: PCI Interrupt Link [LU2B] (IRQs *5 7 9 10 11 14 15)
[ 0.274928] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[ 0.276016] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 0.276205] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.276399] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
[ 0.276586] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.276781] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.277070] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.277350] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 0.277628] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.277913] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.278192] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.278472] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.278750] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.279030] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.279309] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[ 0.279591] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
[ 0.279871] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0
[ 0.280171] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
[ 0.280452] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0
[ 0.280734] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.281014] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.281297] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.281577] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.281858] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.282141] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.282425] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.282516] PCI: Using ACPI for IRQ routing
[ 0.316046] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.316060] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.324022] Switched to NOHz mode on CPU #0
[ 0.324674] Switched to NOHz mode on CPU #1
[ 0.352033] pnp: PnP ACPI init
[ 0.352071] ACPI: bus type pnp registered
[ 0.360028] pnp: PnP ACPI: found 14 devices
[ 0.360038] ACPI: ACPI bus type pnp unregistered
[ 0.360061] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.360073] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.360084] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.360096] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.360108] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.360119] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.360132] system 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.360144] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved
[ 0.360157] system 00:01: iomem range 0x3c000000-0x3fffffff has been reserved
[ 0.360177] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.360188] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.360199] system 00:02: ioport range 0x295-0x314 has been reserved
[ 0.360211] system 00:02: ioport range 0x290-0x294 has been reserved
[ 0.360232] system 00:0c: iomem range 0xf0000000-0xf1ffffff has been reserved
[ 0.360250] system 00:0d: iomem range 0xd4600-0xd7fff has been reserved
[ 0.360262] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.360274] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.360287] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[ 0.360299] system 00:0d: iomem range 0x3bef0000-0x3befffff could not be reserved
[ 0.360312] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.360325] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.360337] system 00:0d: iomem range 0x100000-0x3beeffff could not be reserved
[ 0.360350] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.360364] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.396174] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[ 0.396184] pci 0000:00:08.0: IO window: 0xa000-0xbfff
[ 0.396195] pci 0000:00:08.0: MEM window: 0xf3000000-0xf4ffffff
[ 0.396207] pci 0000:00:08.0: PREFETCH window: 0x40000000-0x400fffff
[ 0.396225] pci 0000:00:08.0: setting latency timer to 64
[ 0.396230] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.396233] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.396236] pci_bus 0000:01: resource 0 io: [0xa000-0xbfff]
[ 0.396238] pci_bus 0000:01: resource 1 mem: [0xf3000000-0xf4ffffff]
[ 0.396241] pci_bus 0000:01: resource 2 pref mem [0x40000000-0x400fffff]
[ 0.396244] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.396246] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.396386] NET: Registered protocol family 2
[ 0.396636] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.397410] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.398232] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[ 0.402685] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.402735] TCP reno registered
[ 0.402981] NET: Registered protocol family 1
[ 0.403433] Unpacking initramfs...
[ 0.530861] Freeing initrd memory: 3912k freed
[ 0.537695] highmem bounce pool size: 64 pages
[ 0.540410] msgmni has been set to 1736
[ 0.540973] alg: No test for stdrng (krng)
[ 0.541021] io scheduler noop registered
[ 0.541032] io scheduler anticipatory registered
[ 0.541040] io scheduler deadline registered
[ 0.541084] io scheduler cfq registered (default)
[ 0.541288] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.541363] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.541448] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.541541] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.541557] pci 0000:00:12.0: Boot video device
[ 0.542847] vesafb: framebuffer at 0xe0000000, mapped to 0xf8280000, using 10240k, total 65536k
[ 0.542860] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.542870] vesafb: protected mode interface info at c000:cfb0
[ 0.542880] vesafb: pmi: set display start = c00ccfe6, set palette = c00cd050
[ 0.542891] vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
[ 0.542931] vesafb: scrolling: redraw
[ 0.542939] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.567384] Console: switching to colour frame buffer device 160x64
[ 0.589272] fb0: VESA VGA frame buffer device
[ 0.605509] Linux agpgart interface v0.103
[ 0.606169] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.606340] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.606649] Platform driver 'i8042' needs updating - please use dev_pm_ops
[ 0.607127] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.607824] mice: PS/2 mouse device common for all mice
[ 0.608480] cpuidle: using governor ladder
[ 0.608595] cpuidle: using governor menu
[ 0.609217] TCP cubic registered
[ 0.609333] Using IPI No-Shortcut mode
[ 0.628179] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.628840] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
[ 0.629547] Freeing unused kernel memory: 304k freed
[ 0.630044] Write protecting the kernel text: 1904k
[ 0.630254] Write protecting the kernel read-only data: 904k
[ 0.650339] all_generic_ide used greatest stack depth: 2696 bytes left
[ 0.702111] setfont used greatest stack depth: 2364 bytes left
[ 0.776645] device-mapper: uevent: version 1.0.3
[ 0.777042] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.797742] SCSI subsystem initialized
[ 0.810945] libata version 3.00 loaded.
[ 0.812808] pata_amd 0000:00:06.0: version 0.4.1
[ 0.812993] pata_amd 0000:00:06.0: setting latency timer to 64
[ 0.813142] scsi0 : pata_amd
[ 0.813766] scsi1 : pata_amd
[ 0.815336] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.815530] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.984468] ata1.00: HPA detected: current 78163247, native 78165360
[ 0.984654] ata1.00: ATA-5: ST340016A, 3.75, max UDMA/100
[ 0.984804] ata1.00: 78163247 sectors, multi 16: LBA
[ 0.984971] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4165B, DL05, max UDMA/33
[ 0.985176] ata1: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x1f)
[ 0.985181] ata1: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x1f)
[ 1.000405] ata1.00: configured for UDMA/100
[ 1.016243] ata1.01: configured for UDMA/33
[ 1.019216] scsi 0:0:0:0: Direct-Access ATA ST340016A 3.75 PQ: 0 ANSI: 5
[ 1.030276] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4165B DL05 PQ: 0 ANSI: 5
[ 1.037494] ata2: port disabled. ignoring.
[ 1.037611] modprobe used greatest stack depth: 2316 bytes left
[ 1.049124] pata_sil680 0000:01:07.0: version 0.4.9
[ 1.049662] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 1.056681] alloc irq_desc for 17 on node -1
[ 1.056684] alloc kstat_irqs on node -1
[ 1.056694] pata_sil680 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 1.063889] sil680: 133MHz clock.
[ 1.071309] scsi2 : pata_sil680
[ 1.078820] scsi3 : pata_sil680
[ 1.086103] ata3: PATA max UDMA/133 cmd 0xa000 ctl 0xa400 bmdma 0xb000 irq 17
[ 1.093378] ata4: PATA max UDMA/133 cmd 0xa800 ctl 0xac00 bmdma 0xb008 irq 17
[ 1.272510] ata3.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[ 1.279687] ata3.01: 160086528 sectors, multi 16: LBA
[ 1.300389] ata3.01: configured for UDMA/133
[ 1.307760] scsi 2:0:1:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
[ 1.530325] ata4.01: ATA-7: MAXTOR STM3802110A, 3.AAJ, max UDMA/100
[ 1.537813] ata4.01: 156301488 sectors, multi 16: LBA48
[ 1.605149] ata4.01: configured for UDMA/100
[ 1.628136] scsi 3:0:1:0: Direct-Access ATA MAXTOR STM380211 3.AA PQ: 0 ANSI: 5
[ 1.642568] sd 0:0:0:0: [sda] 78163247 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.650477] sd 0:0:0:0: [sda] Write Protect is off
[ 1.658358] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.658399] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.666833] sda:
[ 1.667297] sd 2:0:1:0: [sdb] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
[ 1.681593] sda1 sda2 sda3 <
[ 1.683170] sd 2:0:1:0: [sdb] Write Protect is off
[ 1.692125] sda5
[ 1.698980] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.706771] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.711948] sda6 sda7 >
[ 1.722957] sdb:
[ 1.723281] sd 3:0:1:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.726805] sdb1 sdb2 <
[ 1.739230] sd 3:0:1:0: [sdc] Write Protect is off
[ 1.741025] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.743611] sdb5 sdb6 >
[ 1.770620] sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.770664] sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.771412] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 1.786574] sdc: sdc1 sdc2 < sdc5 >
[ 1.826821] sd 3:0:1:0: [sdc] Attached SCSI disk
[ 1.857553] fuse init (API version 7.12)
[ 1.893007] md: linear personality registered for level -1
[ 1.907682] md: raid0 personality registered for level 0
[ 1.920615] md: raid1 personality registered for level 1
[ 1.941772] md: raid10 personality registered for level 10
[ 2.136927] scsi_id used greatest stack depth: 2228 bytes left
[ 2.157047] scsi_id used greatest stack depth: 2192 bytes left
[ 2.254433] vol_id used greatest stack depth: 2116 bytes left
[ 2.443896] md: bind<sdc5>
[ 2.550107] md: bind<sdb6>
[ 2.607666] raid1: raid set md127 active with 2 out of 2 mirrors
[ 2.630132] md127: bitmap initialized from disk: read 11/11 pages, set 532 bits
[ 2.632911] md: bind<sdc1>
[ 2.645769] created bitmap (161 pages) for device md127
[ 2.679534] mdadm used greatest stack depth: 1964 bytes left
[ 2.690216] md127: unknown partition table
[ 2.866970] md: bind<sda1>
[ 2.885029] raid1: raid set md0 active with 2 out of 2 mirrors
[ 2.905003] md0: bitmap initialized from disk: read 1/1 pages, set 2 bits
[ 2.912574] created bitmap (6 pages) for device md0
[ 2.945103] md0:
[ 10.536943] EXT3-fs: mounted filesystem with writeback data mode.
[ 10.544270] kjournald starting. Commit interval 5 seconds
[ 12.238787] grep used greatest stack depth: 1940 bytes left
[ 22.423153] udev: starting version 141
[ 22.686495] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 22.706567] rtc_cmos 00:05: RTC can wake from S4
[ 22.712983] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 22.719268] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 22.755912] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 22.763246] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 22.772829] alloc irq_desc for 23 on node -1
[ 22.772832] alloc kstat_irqs on node -1
[ 22.772867] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 22.778250] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 22.785706] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 22.788623] parport_pc 00:0a: reported by Plug and Play ACPI
[ 22.796190] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 22.813139] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 22.820321] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.823722] Platform driver 'floppy' needs updating - please use dev_pm_ops
[ 22.823871] Floppy drive(s): fd0 is 1.44M
[ 22.828293] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.828365] scsi 0:0:1:0: Attached scsi generic sg1 type 5
[ 22.828438] sd 2:0:1:0: Attached scsi generic sg2 type 0
[ 22.828509] sd 3:0:1:0: Attached scsi generic sg3 type 0
[ 22.838074] processor LNXCPU:00: registered as cooling_device0
[ 22.838196] processor LNXCPU:01: registered as cooling_device1
[ 22.848080] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 22.848170] ACPI: Power Button [PWRF]
[ 22.848321] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 22.848435] ACPI: Power Button [PWRB]
[ 22.867749] usbcore: registered new interface driver usbfs
[ 22.867913] usbcore: registered new interface driver hub
[ 22.879118] usbcore: registered new device driver usb
[ 22.880660] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 22.941558] FDC 0 is a post-1991 82077
[ 22.992672] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 22.999570] Uniform CD-ROM driver Revision: 3.20
[ 23.006898] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 23.112007] Platform driver 'serial8250' needs updating - please use dev_pm_ops
[ 23.209664] cdrom_id used greatest stack depth: 1864 bytes left
[ 23.306737] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1f:d0:53:49:ae
[ 23.313735] forcedeth 0000:00:0a.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 23.321262] ahci 0000:00:09.0: version 3.0
[ 23.321831] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
[ 23.329158] alloc irq_desc for 22 on node -1
[ 23.329161] alloc kstat_irqs on node -1
[ 23.329170] ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 22 (level, low) -> IRQ 22
[ 23.338717] alloc irq_desc for 24 on node -1
[ 23.338722] alloc kstat_irqs on node -1
[ 23.338734] ahci 0000:00:09.0: irq 24 for MSI/MSI-X
[ 23.339084] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 23.347538] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
[ 23.354899] ahci 0000:00:09.0: setting latency timer to 64
[ 23.356478] scsi4 : ahci
[ 23.364024] scsi5 : ahci
[ 23.371924] scsi6 : ahci
[ 23.379699] scsi7 : ahci
[ 23.387279] ata5: SATA max UDMA/133 abar m8192@0xf7004000 port 0xf7004100 irq 24
[ 23.395361] ata6: SATA max UDMA/133 abar m8192@0xf7004000 port 0xf7004180 irq 24
[ 23.402519] ata7: SATA max UDMA/133 abar m8192@0xf7004000 port 0xf7004200 irq 24
[ 23.409747] ata8: SATA max UDMA/133 abar m8192@0xf7004000 port 0xf7004280 irq 24
[ 23.418300] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 21
[ 23.425678] alloc irq_desc for 21 on node -1
[ 23.425682] alloc kstat_irqs on node -1
[ 23.425695] ehci_hcd 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 21 (level, low) -> IRQ 21
[ 23.432915] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 23.432919] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 23.440889] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 23.448296] ehci_hcd 0000:00:02.1: debug port 1
[ 23.455482] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 23.455511] ehci_hcd 0000:00:02.1: irq 21, io mem 0xf700b000
[ 23.473493] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 23.481934] usb usb1: configuration #1 chosen from 1 choice
[ 23.489678] hub 1-0:1.0: USB hub found
[ 23.496960] hub 1-0:1.0: 5 ports detected
[ 23.505768] ACPI: PCI Interrupt Link [AU2B] disabled and referenced, BIOS bug
[ 23.513842] ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 20
[ 23.521351] alloc irq_desc for 20 on node -1
[ 23.521354] alloc kstat_irqs on node -1
[ 23.521364] ehci_hcd 0000:00:04.1: PCI INT B -> Link[AU2B] -> GSI 20 (level, low) -> IRQ 20
[ 23.529152] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 23.529156] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 23.536893] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 23.544656] ehci_hcd 0000:00:04.1: debug port 1
[ 23.552592] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 23.552625] ehci_hcd 0000:00:04.1: irq 20, io mem 0xf7009000
[ 23.569481] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 23.577225] usb usb2: configuration #1 chosen from 1 choice
[ 23.584970] hub 2-0:1.0: USB hub found
[ 23.592576] hub 2-0:1.0: 5 ports detected
[ 23.646352] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.655063] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 23.663122] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
[ 23.670777] ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23
[ 23.678337] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 23.678341] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 23.685726] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 23.693131] ohci_hcd 0000:00:02.0: irq 23, io mem 0xf700a000
[ 23.755955] usb usb3: configuration #1 chosen from 1 choice
[ 23.763433] hub 3-0:1.0: USB hub found
[ 23.771986] hub 3-0:1.0: 5 ports detected
[ 23.779153] ata5: SATA link down (SStatus 0 SControl 300)
[ 23.786605] ata7: SATA link down (SStatus 0 SControl 300)
[ 23.789630] ata8: SATA link down (SStatus 0 SControl 300)
[ 23.801313] ata6: SATA link down (SStatus 0 SControl 300)
[ 23.809515] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 22
[ 23.812522] alloc irq_desc for 25 on node -1
[ 23.812527] alloc kstat_irqs on node -1
[ 23.812568] forcedeth 0000:00:0a.0: irq 25 for MSI/MSI-X
[ 23.812928] eth0: no link during initialization.
[ 23.823945] ohci_hcd 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 22 (level, low) -> IRQ 22
[ 23.832197] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 23.832203] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 23.839353] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 23.846445] ohci_hcd 0000:00:04.0: irq 22, io mem 0xf700c000
[ 23.907804] usb usb4: configuration #1 chosen from 1 choice
[ 23.915151] hub 4-0:1.0: USB hub found
[ 23.922263] hub 4-0:1.0: 5 ports detected
[ 23.953366] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
[ 23.960892] HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
[ 23.968338] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 23.969530] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 24.110044] usb 2-2: configuration #1 chosen from 1 choice
[ 24.117472] hub 2-2:1.0: USB hub found
[ 24.125597] hub 2-2:1.0: 4 ports detected
[ 24.212352] NET: Registered protocol family 10
[ 24.222910] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.309529] usb 4-1: new low speed USB device using ohci_hcd and address 2
[ 24.455200] eth0: link up.
[ 24.462407] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.528776] usb 4-1: configuration #1 chosen from 1 choice
[ 24.610604] usb 2-2.4: new full speed USB device using ehci_hcd and address 4
[ 24.714771] usb 2-2.4: configuration #1 chosen from 1 choice
[ 24.726185] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.0/input/input4
[ 24.733663] generic-usb 0003:04F3:0210.0001: input: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:04.0-1/input0
[ 24.741230] usbcore: registered new interface driver usbhid
[ 24.748709] usbhid: v2.6:USB HID core driver
[ 24.787900] usbcore: registered new interface driver usbserial
[ 24.796102] usbserial: USB Serial Driver core
[ 24.812633] USB Serial support registered for pl2303
[ 24.820232] pl2303 2-2.4:1.0: pl2303 converter detected
[ 24.832373] usb 2-2.4: pl2303 converter now attached to ttyUSB0
[ 24.840047] usbcore: registered new interface driver pl2303
[ 24.847650] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 25.251987] it87: Found IT8716F chip at 0x290, revision 3
[ 26.214910] EXT3 FS on dm-5, internal journal
[ 27.098375] kjournald starting. Commit interval 5 seconds
[ 27.149517] EXT3 FS on md0, internal journal
[ 27.149529] EXT3-fs: mounted filesystem with writeback data mode.
[ 27.242858] REISERFS (device dm-0): found reiserfs format "3.6" with standard journal
[ 27.242974] REISERFS (device dm-0): using ordered data mode
[ 27.248134] REISERFS (device dm-0): journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 27.248804] REISERFS (device dm-0): checking transaction log (dm-0)
[ 27.388800] REISERFS (device dm-0): Using r5 hash to sort names
[ 27.706662] kjournald starting. Commit interval 5 seconds
[ 27.706675] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 27.811221] EXT3 FS on dm-10, internal journal
[ 27.811231] EXT3-fs: mounted filesystem with writeback data mode.
[ 27.895472] REISERFS (device sda6): found reiserfs format "3.6" with standard journal
[ 27.895548] REISERFS (device sda6): using ordered data mode
[ 27.903754] REISERFS (device sda6): journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 27.904373] REISERFS (device sda6): checking transaction log (sda6)
[ 27.933186] REISERFS (device sda6): Using r5 hash to sort names
[ 28.309711] Unable to find swap-space signature
[ 28.878010] ttyS1: LSR safety check engaged!
[ 28.879270] ttyS1: LSR safety check engaged!
[ 31.208587] pktcdvd: writer pktcdvd0 mapped to sr0
[ 32.839497] ttyS1: LSR safety check engaged!
[ 33.549103] lp0: using parport0 (interrupt-driven).
[ 35.446212] eth0: no IPv6 routers present
[ 39.578996] aplay used greatest stack depth: 1604 bytes left
[ 224.539384] bash used greatest stack depth: 1464 bytes left
[ 244.015238]
[ 244.015240] =======================================================
[ 244.015244] [ INFO: possible circular locking dependency detected ]
[ 244.015247] 2.6.31-rc4-00220-g46be1f8 #233
[ 244.015249] -------------------------------------------------------
[ 244.015251] gdm/3771 is trying to acquire lock:
[ 244.015253] (&REISERFS_SB(s)->lock){+.+.+.}, at: [<f9ec2066>] reiserfs_write_lock+0x1f/0x2e [reiserfs]
[ 244.015274]
[ 244.015275] but task is already holding lock:
[ 244.015277] (&sb->s_type->i_mutex_key#9/3){+.+.+.}, at: [<f9ec113b>] open_xa_dir+0xff/0x18a [reiserfs]
[ 244.015292]
[ 244.015293] which lock already depends on the new lock.
[ 244.015294]
[ 244.015296]
[ 244.015296] the existing dependency chain (in reverse order) is:
[ 244.015298]
[ 244.015299] -> #1 (&sb->s_type->i_mutex_key#9/3){+.+.+.}:
[ 244.015304] [<c0245741>] __lock_acquire+0x98a/0xafa
[ 244.015310] [<c0245904>] lock_acquire+0x53/0x75
[ 244.015313] [<c03d9684>] __mutex_lock_common+0x3e/0x3ca
[ 244.015318] [<c03d9a99>] mutex_lock_nested+0x29/0x31
[ 244.015321] [<f9ec107f>] open_xa_dir+0x43/0x18a [reiserfs]
[ 244.015334] [<f9ec17f9>] reiserfs_for_each_xattr+0x57/0x1df [reiserfs]
[ 244.015346] [<f9ec19d4>] reiserfs_delete_xattrs+0x13/0x40 [reiserfs]
[ 244.015359] [<f9ead3e0>] reiserfs_delete_inode+0x41/0xb9 [reiserfs]
[ 244.015370] [<c028aa5d>] generic_delete_inode+0x79/0xf1
[ 244.015375] [<c028aae7>] generic_drop_inode+0x12/0x18d
[ 244.015378] [<c0289e3b>] iput+0x4b/0x4e
[ 244.015381] [<c0284448>] do_unlinkat+0xc3/0x107
[ 244.015385] [<c028449c>] sys_unlink+0x10/0x12
[ 244.015388] [<c0203228>] sysenter_do_call+0x12/0x3c
[ 244.015392] [<ffffffff>] 0xffffffff
[ 244.015413]
[ 244.015414] -> #0 (&REISERFS_SB(s)->lock){+.+.+.}:
[ 244.015417] [<c0245653>] __lock_acquire+0x89c/0xafa
[ 244.015421] [<c0245904>] lock_acquire+0x53/0x75
[ 244.015424] [<c03d9684>] __mutex_lock_common+0x3e/0x3ca
[ 244.015427] [<c03d9a99>] mutex_lock_nested+0x29/0x31
[ 244.015431] [<f9ec2066>] reiserfs_write_lock+0x1f/0x2e [reiserfs]
[ 244.015443] [<f9eb7bbe>] search_by_key+0x19c/0x736 [reiserfs]
[ 244.015456] [<f9ea6ee2>] search_by_entry_key+0x17/0x198 [reiserfs]
[ 244.015467] [<f9ea70c1>] reiserfs_find_entry+0x5e/0x21c [reiserfs]
[ 244.015477] [<f9ea76f6>] reiserfs_lookup+0x6f/0xf7 [reiserfs]
[ 244.015488] [<c0281ee3>] __lookup_hash+0xa4/0xbe
[ 244.015492] [<c028396b>] lookup_one_len+0x8e/0x9d
[ 244.015495] [<f9ec114d>] open_xa_dir+0x111/0x18a [reiserfs]
[ 244.015507] [<f9ec17f9>] reiserfs_for_each_xattr+0x57/0x1df [reiserfs]
[ 244.015520] [<f9ec19d4>] reiserfs_delete_xattrs+0x13/0x40 [reiserfs]
[ 244.015532] [<f9ead3e0>] reiserfs_delete_inode+0x41/0xb9 [reiserfs]
[ 244.015543] [<c028aa5d>] generic_delete_inode+0x79/0xf1
[ 244.015547] [<c028aae7>] generic_drop_inode+0x12/0x18d
[ 244.015550] [<c0289e3b>] iput+0x4b/0x4e
[ 244.015553] [<c0284448>] do_unlinkat+0xc3/0x107
[ 244.015556] [<c028449c>] sys_unlink+0x10/0x12
[ 244.015560] [<c0203228>] sysenter_do_call+0x12/0x3c
[ 244.015563] [<ffffffff>] 0xffffffff
[ 244.015569]
[ 244.015569] other info that might help us debug this:
[ 244.015570]
[ 244.015572] 1 lock held by gdm/3771:
[ 244.015574] #0: (&sb->s_type->i_mutex_key#9/3){+.+.+.}, at: [<f9ec113b>] open_xa_dir+0xff/0x18a [reiserfs]
[ 244.015590]
[ 244.015591] stack backtrace:
[ 244.015594] Pid: 3771, comm: gdm Not tainted 2.6.31-rc4-00220-g46be1f8 #233
[ 244.015596] Call Trace:
[ 244.015599] [<c03d86ec>] ? printk+0xf/0x13
[ 244.015602] [<c0244af3>] print_circular_bug_tail+0x5d/0x68
[ 244.015606] [<c0245653>] __lock_acquire+0x89c/0xafa
[ 244.015610] [<c0245904>] lock_acquire+0x53/0x75
[ 244.015622] [<f9ec2066>] ? reiserfs_write_lock+0x1f/0x2e [reiserfs]
[ 244.015625] [<c03d9684>] __mutex_lock_common+0x3e/0x3ca
[ 244.015638] [<f9ec2066>] ? reiserfs_write_lock+0x1f/0x2e [reiserfs]
[ 244.015641] [<c03d9a99>] mutex_lock_nested+0x29/0x31
[ 244.015654] [<f9ec2066>] ? reiserfs_write_lock+0x1f/0x2e [reiserfs]
[ 244.015666] [<f9ec2066>] reiserfs_write_lock+0x1f/0x2e [reiserfs]
[ 244.015678] [<f9eb7bbe>] search_by_key+0x19c/0x736 [reiserfs]
[ 244.015682] [<c0244578>] ? trace_hardirqs_on_caller+0x103/0x124
[ 244.015686] [<c024a477>] ? __module_text_address+0xb/0x48
[ 244.015690] [<c024a5f2>] ? is_module_text_address+0x34/0x45
[ 244.015693] [<c0236092>] ? __kernel_text_address+0x55/0x5b
[ 244.015696] [<c0206793>] ? print_context_stack+0x83/0x94
[ 244.015707] [<f9ea6ee2>] search_by_entry_key+0x17/0x198 [reiserfs]
[ 244.015711] [<c0205aa3>] ? dump_trace+0x78/0xa5
[ 244.015722] [<f9ea70c1>] reiserfs_find_entry+0x5e/0x21c [reiserfs]
[ 244.015725] [<c0243963>] ? save_trace+0x37/0x82
[ 244.015728] [<c0243a0d>] ? add_lock_to_list+0x5f/0x91
[ 244.015731] [<c0245703>] ? __lock_acquire+0x94c/0xafa
[ 244.015742] [<f9ea76f6>] reiserfs_lookup+0x6f/0xf7 [reiserfs]
[ 244.015747] [<c0281ee3>] __lookup_hash+0xa4/0xbe
[ 244.015750] [<c028396b>] lookup_one_len+0x8e/0x9d
[ 244.015762] [<f9ec114d>] open_xa_dir+0x111/0x18a [reiserfs]
[ 244.015775] [<f9ec17f9>] reiserfs_for_each_xattr+0x57/0x1df [reiserfs]
[ 244.015787] [<f9ec1f52>] ? delete_one_xattr+0x0/0x96 [reiserfs]
[ 244.015800] [<f9ec19d4>] reiserfs_delete_xattrs+0x13/0x40 [reiserfs]
[ 244.015811] [<f9ead3e0>] reiserfs_delete_inode+0x41/0xb9 [reiserfs]
[ 244.015822] [<f9ead39f>] ? reiserfs_delete_inode+0x0/0xb9 [reiserfs]
[ 244.015826] [<c028aa5d>] generic_delete_inode+0x79/0xf1
[ 244.015829] [<c028aae7>] generic_drop_inode+0x12/0x18d
[ 244.015832] [<c0289e3b>] iput+0x4b/0x4e
[ 244.015835] [<c0284448>] do_unlinkat+0xc3/0x107
[ 244.015840] [<c026bdc3>] ? do_munmap+0x21c/0x237
[ 244.015843] [<c0203261>] ? sysenter_exit+0xf/0x1a
[ 244.015846] [<c0244578>] ? trace_hardirqs_on_caller+0x103/0x124
[ 244.015849] [<c028449c>] sys_unlink+0x10/0x12
[ 244.015852] [<c0203228>] sysenter_do_call+0x12/0x3c
[ 279.041404] SysRq : Show Blocked State
[ 279.045392] task PC stack pid father
[ 279.045392] pdflush D c04be160 2408 236 2 0x00000000
[ 279.045392] f74d9e8c 00000046 000003e9 c04be160 00000000 00000000 c1aeb6e8 c05361c0
[ 279.045392] c05361c0 c053328c c1a90068 f757c1f0 f757c384 c1c421c0 00000000 00000000
[ 279.045392] f74d9f64 f74d9e7c 00000246 00000000 f757c384 ffffd493 00000000 f9ec2066
[ 279.045392] Call Trace:
[ 279.045392] [<f9ec2066>] ? reiserfs_write_lock+0x1f/0x2e [reiserfs]
[ 279.045392] [<c03d987f>] __mutex_lock_common+0x239/0x3ca
[ 279.045392] [<c03d9a99>] mutex_lock_nested+0x29/0x31
[ 279.045392] [<f9ec2066>] ? reiserfs_write_lock+0x1f/0x2e [reiserfs]
[ 279.045392] [<f9ec2066>] reiserfs_write_lock+0x1f/0x2e [reiserfs]
[ 279.045392] [<f9eb16f8>] reiserfs_sync_fs+0x12/0x51 [reiserfs]
[ 279.045392] [<c027cd1a>] ? sync_supers+0x40/0x8e
[ 279.045392] [<c03d9cff>] ? down_read+0x2a/0x3e
[ 279.045392] [<f9eb1744>] reiserfs_write_super+0xd/0xf [reiserfs]
[ 279.045392] [<c027cd2e>] sync_supers+0x54/0x8e
[ 279.045392] [<c025c50e>] wb_kupdate+0x26/0xed
[ 279.045392] [<c02445a4>] ? trace_hardirqs_on+0xb/0xd
[ 279.045392] [<c025d0cd>] ? pdflush+0x0/0x1c4
[ 279.045392] [<c025d1d2>] pdflush+0x105/0x1c4
[ 279.045392] [<c025c4e8>] ? wb_kupdate+0x0/0xed
[ 279.045392] [<c02378a5>] kthread+0x69/0x6e
[ 279.045392] [<c023783c>] ? kthread+0x0/0x6e
[ 279.045392] [<c0203d8b>] kernel_thread_helper+0x7/0x10
[ 279.045392] bash D c04be160 2476 4334 4276 0x00000000
[ 279.045392] f5305f18 00000046 0000000a c04be160 00000000 f5305f20 c025b81c c05361c0
[ 279.045392] c05361c0 c053328c c04de700 f6f9f230 f6f9f3c4 c1c421c0 00000000 00000000
[ 279.045392] f72993d4 f5305f08 00000246 00000000 f6f9f3c4 ffffe02b 00000000 c02860c9
[ 279.045392] Call Trace:
[ 279.045392] [<c025b81c>] ? __alloc_pages_nodemask+0xec/0x417
[ 279.045392] [<c02860c9>] ? vfs_readdir+0x34/0x82
[ 279.045392] [<c03d987f>] __mutex_lock_common+0x239/0x3ca
[ 279.045392] [<c03d9a69>] mutex_lock_killable_nested+0x29/0x30
[ 279.045392] [<c02860c9>] ? vfs_readdir+0x34/0x82
[ 279.045392] [<c02860c9>] vfs_readdir+0x34/0x82
[ 279.045392] [<c0285e54>] ? filldir64+0x0/0xcd
[ 279.045392] [<c028617a>] sys_getdents64+0x63/0xa0
[ 279.045392] [<c0203228>] sysenter_do_call+0x12/0x3c
[ 279.045392] gconfd-2 D f53e12b0 1624 4669 1 0x00000000
[ 279.045392] f50a7cfc 00000046 f6bf5530 f53e12b0 00000000 f7299a74 f6bf5530 c05361c0
[ 279.045392] c05361c0 f50a7d68 f50a7d34 f6bf5530 f6bf56c4 c1c521c0 00000001 f7299784
[ 279.045392] f7288b40 f50a7cec 00000246 00000000 f6bf56c4 00000000 00000000 f9ec113b
[ 279.045392] Call Trace:
[ 279.045392] [<f9ec113b>] ? open_xa_dir+0xff/0x18a [reiserfs]
[ 279.045392] [<c03d987f>] __mutex_lock_common+0x239/0x3ca
[ 279.045392] [<c03d9a99>] mutex_lock_nested+0x29/0x31
[ 279.045392] [<f9ec113b>] ? open_xa_dir+0xff/0x18a [reiserfs]
[ 279.045392] [<f9ec113b>] open_xa_dir+0xff/0x18a [reiserfs]
[ 279.045392] [<c02445a4>] ? trace_hardirqs_on+0xb/0xd
[ 279.045392] [<f9ec17f9>] reiserfs_for_each_xattr+0x57/0x1df [reiserfs]
[ 279.045392] [<f9ec1f52>] ? delete_one_xattr+0x0/0x96 [reiserfs]
[ 279.045392] [<f9ec2066>] ? reiserfs_write_lock+0x1f/0x2e [reiserfs]
[ 279.045392] [<f9ec19d4>] reiserfs_delete_xattrs+0x13/0x40 [reiserfs]
[ 279.045392] [<f9ead3e0>] reiserfs_delete_inode+0x41/0xb9 [reiserfs]
[ 279.045392] [<f9ead39f>] ? reiserfs_delete_inode+0x0/0xb9 [reiserfs]
[ 279.045392] [<c028aa5d>] generic_delete_inode+0x79/0xf1
[ 279.045392] [<c028aae7>] generic_drop_inode+0x12/0x18d
[ 279.045392] [<c0289e3b>] iput+0x4b/0x4e
[ 279.045392] [<c0287b16>] dentry_iput+0x9c/0xb7
[ 279.045392] [<c0287bd2>] d_kill+0x2d/0x47
[ 279.501457] [<c028940e>] dput+0x10e/0x117
[ 279.501457] [<c0284314>] sys_renameat+0x176/0x1d3
[ 279.501457] [<c028d13e>] ? mntput_no_expire+0x19/0xad
[ 279.501457] [<c0284383>] sys_rename+0x12/0x14
[ 279.501457] [<c0203228>] sysenter_do_call+0x12/0x3c
[ 279.501457] gnome-panel D f7477230 1996 4718 4453 0x00000000
[ 279.501457] ee82cd74 00000046 00000092 f7477230 000000c1 ee82cd48 00000000 c05361c0
[ 279.501457] c05361c0 c053328c 000000c1 f53ea170 f53ea304 c1c521c0 00000001 00000000
[ 279.501457] ee82ce6c ee82cd64 00000246 00000000 f53ea304 ffffd322 00000000 f9ec202b
[ 279.501457] Call Trace:
[ 279.501457] [<f9ec202b>] ? reiserfs_write_lock_once+0x1f/0x3b [reiserfs]
[ 279.501457] [<c03d987f>] __mutex_lock_common+0x239/0x3ca
[ 279.501457] [<c03d9a99>] mutex_lock_nested+0x29/0x31
[ 279.501457] [<f9ec202b>] ? reiserfs_write_lock_once+0x1f/0x3b [reiserfs]
[ 279.501457] [<f9ec202b>] reiserfs_write_lock_once+0x1f/0x3b [reiserfs]
[ 279.501457] [<f9ea76ce>] reiserfs_lookup+0x47/0xf7 [reiserfs]
[ 279.501457] [<c03c9970>] ? unix_stream_recvmsg+0x3f9/0x413
[ 279.501457] [<c0281dcf>] do_lookup+0xb4/0x124
[ 279.501457] [<c0282583>] __link_path_walk+0x33b/0x6ce
[ 279.501457] [<c0282ad7>] path_walk+0x50/0xa5
[ 279.501457] [<c0282eb1>] do_path_lookup+0x21/0x42
[ 279.501457] [<c028491c>] user_path_at+0x3c/0x67
[ 279.501457] [<c0275ddd>] ? kmem_cache_alloc+0x11b/0x153
[ 279.501457] [<c023bc4a>] ? prepare_creds+0x2b/0x72
[ 279.501457] [<c027a933>] sys_faccessat+0x90/0x14a
[ 279.501457] [<c027a9fd>] sys_access+0x10/0x12
[ 279.501457] [<c0203228>] sysenter_do_call+0x12/0x3c
[ 279.501457] trackerd D f7477230 1692 4728 4453 0x00000000
[ 279.501457] ee8c3ce0 00000046 f68aa940 f7477230 c02445a4 ee8c3c88 c03da6c6 c05361c0
[ 279.501457] c05361c0 c053328c 00000000 f52c20b0 f52c2244 c1c521c0 00000001 00000000
[ 279.501457] 00000062 ee8c3cd0 00000246 00000000 f52c2244 ffffd2da 00000000 f9ec202b
[ 279.501457] Call Trace:
[ 279.501457] [<c02445a4>] ? trace_hardirqs_on+0xb/0xd
[ 279.501457] [<c03da6c6>] ? _spin_unlock_irq+0x43/0x4f
[ 279.501457] [<f9ec202b>] ? reiserfs_write_lock_once+0x1f/0x3b [reiserfs]
[ 279.501457] [<c03d987f>] __mutex_lock_common+0x239/0x3ca
[ 279.501457] [<c03d9a99>] mutex_lock_nested+0x29/0x31
[ 279.501457] [<f9ec202b>] ? reiserfs_write_lock_once+0x1f/0x3b [reiserfs]
[ 279.501457] [<f9ec202b>] reiserfs_write_lock_once+0x1f/0x3b [reiserfs]
[ 279.501457] [<f9eaae91>] reiserfs_write_end+0xea/0x241 [reiserfs]
[ 279.501457] [<c021d8f1>] ? kunmap_atomic+0x58/0x70
[ 279.501457] [<c0257ac9>] generic_file_buffered_write+0x136/0x256
[ 279.501457] [<c0258003>] __generic_file_aio_write_nolock+0x250/0x278
[ 279.501457] [<c0258809>] generic_file_aio_write+0x69/0xbd
[ 279.501457] [<c027b497>] do_sync_write+0xab/0xe9
[ 279.501457] [<c0265f3f>] ? might_fault+0x86/0x88
[ 279.501457] [<c0237af7>] ? autoremove_wake_function+0x0/0x33
[ 279.501457] [<f9ead8ac>] reiserfs_file_write+0x6e/0x77 [reiserfs]
[ 279.501457] [<f9ead83e>] ? reiserfs_file_write+0x0/0x77 [reiserfs]
[ 279.501457] [<c027bc75>] vfs_write+0x7c/0xad
[ 279.501457] [<c027bd3f>] sys_write+0x3b/0x60
[ 279.501457] [<c0203228>] sysenter_do_call+0x12/0x3c
[ 279.501457] xdg-user-dirs D f7477230 1796 4740 4453 0x00000000
[ 279.501457] ee977a84 00000046 c1c521c0 f7477230 c02445a4 ee977a30 c03da600 c05361c0
[ 279.501457] c05361c0 c053328c f82335bb f645cc30 f645cdc4 c1c521c0 00000001 00000000
[ 279.501457] 00000001 ee977a74 00000246 00000000 f645cdc4 ffffd2da 00000000 f9ec2066
[ 279.501457] Call Trace:
[ 279.501457] [<c02445a4>] ? trace_hardirqs_on+0xb/0xd
[ 279.501457] [<c03da600>] ? _read_unlock_irqrestore+0x5f/0x6c
[ 279.501457] [<f82335bb>] ? dm_get_table+0x2e/0x35 [dm_mod]
[ 279.501457] [<f9ec2066>] ? reiserfs_write_lock+0x1f/0x2e [reiserfs]
[ 279.501457] [<c03d987f>] __mutex_lock_common+0x239/0x3ca
[ 279.501457] [<c03d9a99>] mutex_lock_nested+0x29/0x31
[ 279.501457] [<f9ec2066>] ? reiserfs_write_lock+0x1f/0x2e [reiserfs]
[ 279.501457] [<f9ec2066>] reiserfs_write_lock+0x1f/0x2e [reiserfs]
[ 279.501457] [<f9eb7bbe>] search_by_key+0x19c/0x736 [reiserfs]
[ 279.501457] [<c02445a4>] ? trace_hardirqs_on+0xb/0xd
[ 279.501457] [<c03d94ed>] ? __mutex_unlock_slowpath+0x112/0x121
[ 279.501457] [<c03d9504>] ? mutex_unlock+0x8/0xa
[ 279.501457] [<f9ebd564>] ? do_journal_end+0xa30/0xc0a [reiserfs]
[ 279.501457] [<f9ea6ee2>] search_by_entry_key+0x17/0x198 [reiserfs]
[ 279.501457] [<f9ea70c1>] reiserfs_find_entry+0x5e/0x21c [reiserfs]
[ 279.501457] [<c03d9504>] ? mutex_unlock+0x8/0xa
[ 279.501457] [<f9ec20ca>] ? reiserfs_write_unlock+0x55/0x5a [reiserfs]
[ 279.501457] [<f9ea76f6>] reiserfs_lookup+0x6f/0xf7 [reiserfs]
[ 279.501457] [<c0281ee3>] __lookup_hash+0xa4/0xbe
[ 279.501457] [<c028396b>] lookup_one_len+0x8e/0x9d
[ 279.501457] [<f9ec114d>] open_xa_dir+0x111/0x18a [reiserfs]
[ 279.501457] [<c02445a4>] ? trace_hardirqs_on+0xb/0xd
[ 279.501457] [<f9ec17f9>] reiserfs_for_each_xattr+0x57/0x1df [reiserfs]
[ 279.501457] [<f9ec1f52>] ? delete_one_xattr+0x0/0x96 [reiserfs]
[ 279.501457] [<f9ec2066>] ? reiserfs_write_lock+0x1f/0x2e [reiserfs]
[ 279.501457] [<f9ec19d4>] reiserfs_delete_xattrs+0x13/0x40 [reiserfs]
[ 279.501457] [<f9ead3e0>] reiserfs_delete_inode+0x41/0xb9 [reiserfs]
[ 279.501457] [<f9ead39f>] ? reiserfs_delete_inode+0x0/0xb9 [reiserfs]
[ 279.501457] [<c028aa5d>] generic_delete_inode+0x79/0xf1
[ 279.501457] [<c028aae7>] generic_drop_inode+0x12/0x18d
[ 279.501457] [<c0289e3b>] iput+0x4b/0x4e
[ 279.501457] [<c0287b16>] dentry_iput+0x9c/0xb7
[ 279.501457] [<c0287bd2>] d_kill+0x2d/0x47
[ 279.501457] [<c028940e>] dput+0x10e/0x117
[ 279.501457] [<c0284314>] sys_renameat+0x176/0x1d3
[ 279.501457] [<c02445a4>] ? trace_hardirqs_on+0xb/0xd
[ 279.501457] [<c02753a9>] ? __cache_free+0x22f/0x371
[ 279.501457] [<c02755b8>] ? kmem_cache_free+0x33/0x5c
[ 279.501457] [<c026b19e>] ? remove_vma+0x50/0x56
[ 279.501457] [<c026bdc3>] ? do_munmap+0x21c/0x237
[ 279.501457] [<c0284383>] sys_rename+0x12/0x14
[ 279.501457] [<c0203228>] sysenter_do_call+0x12/0x3c
[ 361.097011] Warning: dev (tty1) tty->count(6) != #fd's(5) in tty_release_dev
[ 393.659198] pktcdvd: writer pktcdvd0 unmapped
~~
laurent
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2009-08-09 11:55    [from the cache]
©2003-2011 Jasper Spaans