lkml.org 
[lkml]   [2009]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] MFD: TWL4030: print warning for out-of-order script loading
Hi Amit,

On Wed, Jul 08, 2009 at 01:49:35PM +0300, Amit Kucheria wrote:
> When the sleep script is loaded before the wakeup script, there is a
> chance that the system might go to sleep before the wakeup script
> loading is completed. This will lead to a system that does not wakeup
> and has been observed to cause non-booting boards.
>
> Various options were considered to solve this problem, including
> modification of the core twl4030 power code to be smart enough to
> reorder the loading of the scripts. But it felt too over-engineered.
>
> Hence this patch just warns the DPS script developer so that they may be
> reordered in the board-code itself.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
> ---
> drivers/mfd/twl4030-power.c | 11 +++++++++--
> 1 files changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
> index bb9e45f..ef4cc4e 100644
> --- a/drivers/mfd/twl4030-power.c
> +++ b/drivers/mfd/twl4030-power.c
> @@ -315,6 +315,7 @@ static int __init load_triton_script(struct twl4030_script *tscript)
> {
> u8 address = triton_next_free_address;
> int err;
> + static u8 mask = 0;
>
> /* Make sure the script isn't going beyond last valid address */
> if ((address + tscript->size) > (END_OF_SCRIPT-1)) {
> @@ -331,14 +332,20 @@ static int __init load_triton_script(struct twl4030_script *tscript)
> if (tscript->flags & TRITON_WRST_SCRIPT)
> err |= config_warmreset_sequence(address);
>
> - if (tscript->flags & TRITON_WAKEUP12_SCRIPT)
> + if (tscript->flags & TRITON_WAKEUP12_SCRIPT) {
> err |= config_wakeup12_sequence(address);
> + mask |= TRITON_WAKEUP12_SCRIPT;
> + }
>
> if (tscript->flags & TRITON_WAKEUP3_SCRIPT)
> err |= config_wakeup3_sequence(address);
>
> - if (tscript->flags & TRITON_SLEEP_SCRIPT)
> + if (tscript->flags & TRITON_SLEEP_SCRIPT) {
Wouldnt something like:

if (tscript->flags & (TRITON_SLEEP_SCRIPT | TRITON_WAKEUP12_SCRIPT)) {

save us from using an additional mask variable and simplify this patch ?

Cheers,
Samuel.


> + if (!(mask & TRITON_WAKEUP12_SCRIPT))
> + printk(KERN_WARNING
> + "TWL4030: Wakeup script not yet loaded. Might lead to boot failure on some boards\n");
> err |= config_sleep_sequence(address);
> + }
>
> return err;
> }
> --
> 1.6.3.3
>

--
Intel Open Source Technology Centre
http://oss.intel.com/


\
 
 \ /
  Last update: 2009-08-04 20:01    [W:0.034 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site