lkml.org 
[lkml]   [2009]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] SCSI driver for VMware's virtual HBA.
Date
Alok Kataria wrote:
> Greetings to all,
>
> Please find below a patch which adds support for the VMware
> paravirtualized SCSI device (PVSCSI).

> +static const struct pci_device_id pvscsi_pci_tbl[] = {
> + { PCI_DEVICE(PCI_VENDOR_ID_VMWARE, PCI_DEVICE_ID_VMWARE_PVSCSI) },
> + { 0 }
> +};

This can be written shorter as PCI_VDEVICE(VMWARE, 0x07C0). Putting the device
id into the header doesn't get any benefit I see, it just makes harder to
collect the pieces together. It's used only here AFAICT so just write it down
here and be done with it. The vendor id might be better places in
include/linux/pci_ids.h.

> +static struct pvscsi_ctx *
> +pvscsi_acquire_context(struct pvscsi_adapter *adapter, struct scsi_cmnd
> *cmd) +{
> + struct pvscsi_ctx *ctx;
> +
> + if (list_empty(&adapter->cmd_pool))
> + return NULL;
> +
> + ctx = list_entry(adapter->cmd_pool.next, struct pvscsi_ctx, list);

list_first_entry(&adapter->cmd_pool, struct pvscsi_ctx, list);

> +/*
> + * Map a pvscsi_ctx struct to a context ID field value; we map to a simple
> + * non-zero integer.
> + */
> +static u64 pvscsi_map_context(const struct pvscsi_adapter *adapter,
> + const struct pvscsi_ctx *ctx)
> +{
> + return ctx - adapter->cmd_map + 1;
> +}

Is this guaranteed to always be !=0? Maybe add a BUG_ON or WARN_ON here? And
if it is guaranteed please add a short comment to say /how/ this works, as
just from the first look this is at least suspicious.

> +static void pvscsi_write_cmd_desc(const struct pvscsi_adapter *adapter,
> + u32 cmd, const void *desc, size_t len)
> +{
> + const u32 *ptr = desc;
> + unsigned i;
> +
> + len /= sizeof(u32);

How about sizeof(*ptr)? This would just remove the "magic" knowledge about the
size.

> +static int pvscsi_setup_msg_workqueue(struct pvscsi_adapter *adapter)
> +{
> + char name[32];
> +
> + if (!pvscsi_use_msg)
> + return 0;
> +
> + pvscsi_reg_write(adapter, PVSCSI_REG_OFFSET_COMMAND,
> + PVSCSI_CMD_SETUP_MSG_RING);
> +
> + if (pvscsi_reg_read(adapter, PVSCSI_REG_OFFSET_COMMAND_STATUS) == -1)
> + return 0;
> +
> + snprintf(name, sizeof name, "pvscsi_wq_%u", adapter->host->host_no);

sizeof(name)

> + adapter->workqueue = create_singlethread_workqueue(name);
> + if (!adapter->workqueue) {
> + printk(KERN_ERR "pvscsi: failed to create work queue\n");
> + return 0;
> + }
> + INIT_WORK(&adapter->work, pvscsi_msg_workqueue_handler);
> +
> + return 1;
> +}
> +
> +static irqreturn_t pvscsi_isr(int irq, void *devp)
> +{
> + struct pvscsi_adapter *adapter = devp;
> + int handled;
> +
> + if (adapter->use_msi || adapter->use_msix)
> + handled = true;
> + else {
> + u32 val = pvscsi_read_intr_status(adapter);
> + handled = (val & PVSCSI_INTR_ALL_SUPPORTED) != 0;
> + if (handled)
> + pvscsi_write_intr_status(devp, val);
> + }
> +
> + if (handled) {
> + unsigned long flags;
> +
> + spin_lock_irqsave(&adapter->hw_lock, flags);
> +
> + pvscsi_process_completion_ring(adapter);
> + if (adapter->use_msg && pvscsi_msg_pending(adapter))
> + queue_work(adapter->workqueue, &adapter->work);
> +
> + spin_unlock_irqrestore(&adapter->hw_lock, flags);
> + }
> +
> + return IRQ_RETVAL(handled);
> +}
> +
> +static void pvscsi_free_sgls(const struct pvscsi_adapter *adapter)
> +{
> + struct pvscsi_ctx *ctx = adapter->cmd_map;
> + unsigned i;
> +
> + for (i = 0; i < adapter->req_depth; ++i, ++ctx)
> + pci_free_consistent(adapter->dev, PAGE_SIZE, ctx->sgl,
> + ctx->sglPA);
> +}
> +
> +static int pvscsi_setup_msix(const struct pvscsi_adapter *adapter, int
> *irq) +{
> +#ifdef CONFIG_PCI_MSI
> + struct msix_entry entry = { 0, PVSCSI_VECTOR_COMPLETION };
> + int ret;
> +
> + ret = pci_enable_msix(adapter->dev, &entry, 1);
> + if (ret)
> + return ret;
> +
> + *irq = entry.vector;
> +
> + return 0;
> +#else
> + return -1;
> +#endif
> +}

You don't need those #ifdef's here. If CONFIG_PCI_MSI is not defined
pci_enable_msix() is a static inline that always returns -1 (see
include/linux/pci.h).

> +static void pvscsi_shutdown_intr(struct pvscsi_adapter *adapter)
> +{
> + if (adapter->irq) {
> + free_irq(adapter->irq, adapter);
> + adapter->irq = 0;
> + }
> +#ifdef CONFIG_PCI_MSI
> + if (adapter->use_msi) {
> + pci_disable_msi(adapter->dev);
> + adapter->use_msi = 0;
> + }
> +
> + if (adapter->use_msix) {
> + pci_disable_msix(adapter->dev);
> + adapter->use_msix = 0;
> + }
> +#endif
> +}

Those can go away then too, I think.

> +static int __devinit pvscsi_probe(struct pci_dev *pdev,
> + const struct pci_device_id *id)
> +{
> + struct pvscsi_adapter *adapter;
> + struct Scsi_Host *host;
> + unsigned long base, i;
> + int error;
> +
> + error = -ENODEV;
> +
> + if (pci_enable_device(pdev))
> + return error;

As always I suggest having a look on devres (see Documentation/driver-
model/devres.txt) which could simplify your error handling here and your
release function a lot. You only need to make sure it doesn't hurt if all the
PCI resources are freed after the scsi ones as you would end up cleaning the
scsi ones by hand and afterwards devres would throw all it handles (which will
probably be most of your PCI stuff) away itself.

> + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) == 0 &&
> + pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) == 0) {
> + printk(KERN_INFO "pvscsi: using 64bit dma\n");
> + } else if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) == 0 &&
> + pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) == 0) {
> + printk(KERN_INFO "pvscsi: using 32bit dma\n");
> + } else {
> + printk(KERN_ERR "pvscsi: failed to set DMA mask\n");
> + goto out_disable_device;
> + }
> +
> + pvscsi_template.can_queue =
> + min(PVSCSI_MAX_NUM_PAGES_REQ_RING, pvscsi_ring_pages) *
> + PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE;
> + pvscsi_template.cmd_per_lun =
> + min(pvscsi_template.can_queue, pvscsi_cmd_per_lun);
> + host = scsi_host_alloc(&pvscsi_template, sizeof(struct pvscsi_adapter));
> + if (!host) {
> + printk(KERN_ERR "pvscsi: failed to allocate host\n");
> + goto out_disable_device;
> + }
> +
> + adapter = shost_priv(host);
> + memset(adapter, 0, sizeof *adapter);

sizeof(*adapter)

> + adapter->dev = pdev;
> + adapter->host = host;
> +
> + spin_lock_init(&adapter->hw_lock);
> +
> + host->max_channel = 0;
> + host->max_id = 16;
> + host->max_lun = 1;
> +
> + pci_read_config_byte(pdev, PCI_CLASS_REVISION, &adapter->rev);

That's in pdev->revision anyway, isn't it?

> + if (pci_request_regions(pdev, "pvscsi")) {
> + printk(KERN_ERR "pvscsi: pci memory selection failed\n");
> + goto out_free_host;
> + }
> +
> + base = 0;
> + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
> + if ((pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE_IO))
> + continue;
> +
> + if (pci_resource_len(pdev, i) <
> + PVSCSI_MEM_SPACE_NUM_PAGES * PAGE_SIZE)
> + continue;
> +
> + base = pci_resource_start(pdev, i);
> + break;
> + }
> +
> + if (base == 0) {
> + printk(KERN_ERR "pvscsi: adapter has no suitable MMIO region\n");
> + goto out_release_resources;
> + }
> +
> + adapter->mmioBase = ioremap(base, PVSCSI_MEM_SPACE_SIZE);

You are mapping this here with a (probably) different size than the one you
checked above. Also pci_iomap() could simplify that as you don't have to get
the base address and only need to tell it the bar number.

> + if (!adapter->mmioBase) {
> + printk(KERN_ERR "pvscsi: can't ioremap 0x%lx\n", base);
> + goto out_release_resources;
> + }
> +
> + pci_set_master(pdev);
> + pci_set_drvdata(pdev, host);
> +
> + ll_adapter_reset(adapter);
> +
> + adapter->use_msg = pvscsi_setup_msg_workqueue(adapter);
> +
> + error = pvscsi_allocate_rings(adapter);
> + if (error) {
> + printk(KERN_ERR "pvscsi: unable to allocate ring memory\n");
> + goto out_release_resources;
> + }
> +
> + /*
> + * From this point on we should reset the adapter if anything goes
> + * wrong.
> + */
> + pvscsi_setup_all_rings(adapter);
> +
> + adapter->cmd_map = kmalloc(adapter->req_depth *
> + sizeof(struct pvscsi_ctx), GFP_KERNEL);

kcalloc(), this will do overflow checking and also clear the memory for you.


> + printk(KERN_INFO "VMware PVSCSI rev %d on bus:%u slot:%u func:%u host
> #%u\n", + adapter->rev, pdev->bus->number, PCI_SLOT(pdev->devfn),
> + PCI_FUNC(pdev->devfn), host->host_no);

dev_info(&pdev->dev, ..), this should also give you the PCI
domain/bus/slot/function information for free.

> +static int __init pvscsi_init(void)
> +{
> + printk(KERN_DEBUG "%s - version %s\n",
> + PVSCSI_LINUX_DRIVER_DESC, PVSCSI_DRIVER_VERSION_STRING);

pr_debug()

HTH & HAND

Eike
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2009-08-28 08:07    [W:0.108 / U:0.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site