lkml.org 
[lkml]   [2009]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH,v2] acpi: thermal: display forced passive trip points in proc
Date
Users can force a passive trip point for a thermal zone that does not
have _PSV defined in ACPI by setting the passive attribute in sysfs.
It's useful to display such trip points in /proc/acpi/thermal_zone.

.../TZ1/cooling_mode:<setting not supported>
.../TZ1/polling_frequency:polling frequency: 10 seconds
.../TZ1/state:state: ok
.../TZ1/temperature:temperature: 53 C
.../TZ1/trip_points:critical (S5): 110 C
.../TZ1/trip_points:passive (forced): 95 C

And if not set (passive is 0):
.../TZ1/trip_points:passive (forced):<not set>

Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Zhang Rui <rui.zhang@intel.com>
---
I noticed I forgot the linefeed and thought of a further improvement.

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 564ea14..7ff5789 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -1050,6 +1050,13 @@ static int acpi_thermal_trip_seq_show(struct
seq_file *seq, void *offset)
acpi_device_bid(device));
}
seq_puts(seq, "\n");
+ } else {
+ seq_printf(seq, "passive (forced):");
+ if (tz->thermal_zone->forced_passive)
+ seq_printf(seq, " %i C\n",
+ tz->thermal_zone->forced_passive / 1000);
+ else
+ seq_printf(seq, "<not set>\n");
}

for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {

\
 
 \ /
  Last update: 2009-08-21 17:33    [from the cache]
©2003-2011 Jasper Spaans