lkml.org 
[lkml]   [2009]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[WATCHDOG] v2.6.31-rc5 watchdog fix
Hi Linus,

Please pull from 'master' branch of
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
or if master.kernel.org hasn't synced up yet:
master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git

This will update the following files:

drivers/watchdog/coh901327_wdt.c | 11 +++++++++++
1 file changed, 11 insertions(+)

with these Changes:

Author: Linus Walleij <linus.walleij@stericsson.com>
Date: Tue Jul 21 00:40:46 2009 +0200

[WATCHDOG] Fix COH 901 327 watchdog enablement

Since the COH 901 327 found in U300 is clocked at 32 kHz we need
to wait for the interrupt clearing flag to propagate through
hardware in order not to accidentally fire off any interrupts
when we enable them.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

The Changes can also be looked at on:
http://www.kernel.org/git/?p=linux/kernel/git/wim/linux-2.6-watchdog.git;a=summary

For completeness, I added the overal diff below.

Greetings,
Wim.

================================================================================
diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
index fecb307..aec7cef 100644
--- a/drivers/watchdog/coh901327_wdt.c
+++ b/drivers/watchdog/coh901327_wdt.c
@@ -18,6 +18,7 @@
#include <linux/bitops.h>
#include <linux/uaccess.h>
#include <linux/clk.h>
+#include <linux/delay.h>

#define DRV_NAME "WDOG COH 901 327"

@@ -92,6 +93,8 @@ static struct clk *clk;
static void coh901327_enable(u16 timeout)
{
u16 val;
+ unsigned long freq;
+ unsigned long delay_ns;

clk_enable(clk);
/* Restart timer if it is disabled */
@@ -102,6 +105,14 @@ static void coh901327_enable(u16 timeout)
/* Acknowledge any pending interrupt so it doesn't just fire off */
writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE,
virtbase + U300_WDOG_IER);
+ /*
+ * The interrupt is cleared in the 32 kHz clock domain.
+ * Wait 3 32 kHz cycles for it to take effect
+ */
+ freq = clk_get_rate(clk);
+ delay_ns = (1000000000 + freq - 1) / freq; /* Freq to ns and round up */
+ delay_ns = 3 * delay_ns; /* Wait 3 cycles */
+ ndelay(delay_ns);
/* Enable the watchdog interrupt */
writew(U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE, virtbase + U300_WDOG_IMR);
/* Activate the watchdog timer */

\
 
 \ /
  Last update: 2009-08-02 22:09    [W:0.019 / U:9.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site