lkml.org 
[lkml]   [2009]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
From
On Thu, Aug 13, 2009 at 4:44 PM, <david@lang.hm> wrote:
> On Thu, 13 Aug 2009, Greg Freemyer wrote:
>
>> On Thu, Aug 13, 2009 at 12:33 PM, <david@lang.hm> wrote:
>>>
>>> On Thu, 13 Aug 2009, Markus Trippelsdorf wrote:
>>>
>>>> On Thu, Aug 13, 2009 at 08:13:12AM -0700, Matthew Wilcox wrote:
>>>>>
>>>>> I am planning a complete overhaul of the discard work.  Users can send
>>>>> down discard requests as frequently as they like.  The block layer will
>>>>> cache them, and invalidate them if writes come through.  Periodically,
>>>>> the block layer will send down a TRIM or an UNMAP (depending on the
>>>>> underlying device) and get rid of the blocks that have remained
>>>>> unwanted
>>>>> in the interim.
>>>>
>>>> That is a very good idea. I've tested your original TRIM implementation
>>>> on
>>>> my Vertex yesterday and it was awful ;-). The SSD needs hundreds of
>>>> milliseconds to digest a single TRIM command. And since your
>>>> implementation
>>>> sends a TRIM for each extent of each deleted file, the whole system is
>>>> unusable after a short while.
>>>> An optimal solution would be to consolidate the discard requests, bundle
>>>> them and send them to the drive as infrequent as possible.
>>>
>>> or queue them up and send them when the drive is idle (you would need to
>>> keep track to make sure the space isn't re-used)
>>>
>>> as an example, if you would consider spinning down a drive you don't hurt
>>> performance by sending accumulated trim commands.
>>>
>>> David Lang
>>
>> An alternate approach is the block layer maintain its own bitmap of
>> used unused sectors / blocks. Unmap commands from the filesystem just
>> cause the bitmap to be updated.  No other effect.
>
> how does the block layer know what blocks are unused by the filesystem?
>
> or would it be a case of the filesystem generating discard/trim requests to
> the block layer so that it can maintain it's bitmap, and then the block
> layer generating the requests to the drive below it?
>
> David Lang

Yes, my thought.was that block layer would consume the discard/trim
requests from the filesystem in realtime to maintain the bitmap, then
at some later point in time when the system has extra resources it
would generate the calls down to the lower layers and eventually the
drive.

I highlight the lower layers because mdraid is also going to have to
be in the mix if raid5/6 is in use. ie. At a minimum it will have to
adjust the block range to align with the stripe boundaries.

Greg
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2009-08-13 23:31    [W:0.169 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site