Messages in this thread | | | Date | Mon, 10 Aug 2009 17:05:44 +0530 | From | Dhaval Vasa <> | Subject | Re: [PATCH] [ARM] Kirkwood: Marvell OpenRD-Base board support added to v2.6.31-rc5 |
| |
Nicolas Pitre wrote: > [ arm-linux mailing list added to CC ] > > On Thu, 6 Aug 2009, Dhaval Vasa wrote: > >> reference: >> http://open-rd.org >> http://code.google.com/p/openrd >> >> This patch is tested for: >> 1. Boot from DRAM/NAND flash >> 2. NAND read/write/erase >> 3. GbE0 >> 4. USB read/write >> >> FIXME: >> 1. SD/UART1 selection >> 2. MPP configuration (currently, default) >> 3. PEX >> >> Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com> > > Comments below. > >> diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c >> new file mode 100644 >> index 0000000..26b6e58 >> --- /dev/null >> +++ b/arch/arm/mach-kirkwood/openrd_base-setup.c >> @@ -0,0 +1,79 @@ >> +/* >> + * arch/arm/mach-kirkwood/openrd_base-setup.c >> + * >> + * Marvell OpenRD Base Board Setup >> + * >> + * This file is licensed under the terms of the GNU General Public >> + * License version 2. This program is licensed "as is" without any >> + * warranty of any kind, whether express or implied. >> + */ >> + >> +#include <linux/kernel.h> >> +#include <linux/init.h> >> +#include <linux/platform_device.h> >> +#include <linux/mtd/partitions.h> >> +#include <linux/mv643xx_eth.h> >> +#include <linux/gpio.h> >> +#include <linux/leds.h> >> +#include <asm/mach-types.h> >> +#include <asm/mach/arch.h> >> +#include <mach/kirkwood.h> >> +#include <plat/mvsdio.h> >> +#include "common.h" >> +#include "mpp.h" > > The leds.h include appears to be unneeded. > >> + >> +static struct mtd_partition openrd_base_nand_parts[] = { >> + { >> + .name = "u-boot", >> + .offset = 0, >> + .size = SZ_1M >> + }, { >> + .name = "uImage", >> + .offset = MTDPART_OFS_NXTBLK, >> + .size = SZ_4M >> + }, { >> + .name = "root", >> + .offset = MTDPART_OFS_NXTBLK, >> + .size = MTDPART_SIZ_FULL >> + }, >> +}; >> + >> +static struct mv643xx_eth_platform_data openrd_base_ge00_data = { >> + .phy_addr = MV643XX_ETH_PHY_ADDR(8), >> +}; >> + >> +static struct mvsdio_platform_data openrd_base_mvsdio_data = { >> + .gpio_card_detect = MPP29_GPIO, /* MPP29 used as SD card detect */ >> +}; > > You should use a literal number here, like .gpio_card_detect = 29.
patch v2 will close this review comment.
> >> +static unsigned int openrd_base_mpp_config[] __initdata = { >> + 0 >> +}; > > Here belongs the MPP29_GPIO.
patch v2 will close this review comment.
Thanks for review.
- Dhaval -- _____________________________________________________________________ Disclaimer: This e-mail message and all attachments transmitted with it are intended solely for the use of the addressee and may contain legally privileged and confidential information. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution, copying, or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately by replying to this message and please delete it from your computer. Any views expressed in this message are those of the individual sender unless otherwise stated.Company has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email. _____________________________________________________________________
| |