lkml.org 
[lkml]   [2009]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: max freq is 2.1, but current freq is between min.
On Thu, Jul 23, 2009 at 10:36:46PM +0300, eial@cs.bgu.ac.il wrote:
>
> I have a t8100 cpu, running gentoo, I've tried both kernels 2.6.29 and 30, but for no avail.
> I have 4 stepping: 2.10 GHz, 2.10 GHz, 1.60 GHz, 1.20 GHz but under all governors, the max freq is 1.2 it changes here and there: cpufreq-info shows this:
> ..
> current policy: frequency should be within 1.20 GHz and 1.20 GHz. <----- range is not ok
> ..
> the range keeps changing, due this thing, it took e 6 and a half hours to compile openoffice, almost twice than the average time that I have compiled it before.
> most of the time, the computer is unusable.I have no idea what else can be done, I've checked the bios, all ok, that is the latest version of bios, running boinc, compile and checking for broken libs keeps the freq at min...

Boot with cpufreq.debug=7 and you should see notices in your dmesg when the
upper bound is being limited. This usually happens when the BIOS tells us
the system is overheating. As it cools off, the higher speeds should become
available again.

Dave



\
 
 \ /
  Last update: 2009-07-23 23:09    [W:0.031 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site