lkml.org 
[lkml]   [2009]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] Add low_power support for adm1021 driver.
On Mon, 6 Jul 2009 17:26:32 +0100 (BST) Michael Abbott <michael@araneidae.co.uk> wrote:

> Resending this patch previously sent some months again.
>
> Occasionally it is helpful to be able to turn a temperature sensor off
> (for example if it's making unwanted electrical noise). This patch
> adds a sysfs node to put any adm1021 compatible device into low power mode.
>
> Signed-off-by: Michael Abbott <michael.abbott@diamond.ac.uk>
> ---
> drivers/hwmon/adm1021.c | 33 +++++++++++++++++++++++++++++++++
> 1 files changed, 33 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
> index de84398..39434e1 100644
> --- a/drivers/hwmon/adm1021.c
> +++ b/drivers/hwmon/adm1021.c
> @@ -83,6 +83,7 @@ struct adm1021_data {
>
> struct mutex update_lock;
> char valid; /* !=0 if following fields are valid */
> + char low_power; /* !=0 if device in low power mode */
> unsigned long last_updated; /* In jiffies */
>
> int temp_max[2]; /* Register values */
> @@ -213,6 +214,35 @@ static ssize_t set_temp_min(struct device *dev,
> return count;
> }
>
> +static ssize_t show_low_power(
> + struct device *dev, struct device_attribute *devattr, char *buf)

This is atypical layout. Please use something like

static ssize_t show_low_power(struct device *dev,
struct device_attribute *devattr, char *buf)

as is used in the rest of this driver, and much kernel code.

> +{
> + struct adm1021_data *data = adm1021_update_device(dev);
> + return sprintf(buf, "%d\n", data->low_power);
> +}
> +
> +static ssize_t set_low_power(
> + struct device *dev, struct device_attribute *devattr,
> + const char *buf, size_t count)

ditto

> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct adm1021_data *data = i2c_get_clientdata(client);
> + int low_power = simple_strtol(buf, NULL, 10) != 0;
> + mutex_lock(&data->update_lock);

And a blank line between end-of-locals and start-of-code.

Please use scripts/checkpatch.pl. It would have informed you that
strict_strtoul() is preferred here. Otherwise we will treat userspace
input of the form "0blob" and a valid decimal number, which it isn't.


> + if (low_power != data->low_power) {
> + int config = i2c_smbus_read_byte_data(
> + client, ADM1021_REG_CONFIG_R);
> + data->low_power = low_power;
> + i2c_smbus_write_byte_data(client, ADM1021_REG_CONFIG_W,
> + (config & 0xBF) | (low_power << 6));
> + }
> + mutex_unlock(&data->update_lock);
> +
> + return count;
> +}
> +
> +
> static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
> static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
> set_temp_max, 0);
> @@ -230,6 +260,8 @@ static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3);
> static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2);
>
> static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
> +static DEVICE_ATTR(
> + low_power, S_IWUSR | S_IRUGO, show_low_power, set_low_power);

Again, please use standard layout.

> static struct attribute *adm1021_attributes[] = {
> &sensor_dev_attr_temp1_max.dev_attr.attr,
> @@ -244,6 +276,7 @@ static struct attribute *adm1021_attributes[] = {
> &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
> &sensor_dev_attr_temp2_fault.dev_attr.attr,
> &dev_attr_alarms.attr,
> + &dev_attr_low_power.attr,
> NULL
> };

I'll merge this patch as-is anyway so it doesn't get forgotten about. I'll
mark it as needing-an-update.

Thanks.


\
 
 \ /
  Last update: 2009-07-21 08:17    [W:0.052 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site