lkml.org 
[lkml]   [2009]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] staging: cpc-usb: convert comment style in cpc.h
Date
Signed-off-by: Felipe Balbi <me@felipebalbi.com>
---
drivers/staging/cpc-usb/cpc.h | 504 +++++++++++++++++++----------------------
1 files changed, 233 insertions(+), 271 deletions(-)

diff --git a/drivers/staging/cpc-usb/cpc.h b/drivers/staging/cpc-usb/cpc.h
index ed8cb34..774ea22 100644
--- a/drivers/staging/cpc-usb/cpc.h
+++ b/drivers/staging/cpc-usb/cpc.h
@@ -10,243 +10,216 @@
#ifndef CPC_HEADER
#define CPC_HEADER

-// the maximum length of the union members within a CPC_MSG
-// this value can be defined by the customer, but has to be
-// >= 64 bytes
-// however, if not defined before, we set a length of 64 byte
+/* the maximum length of the union members within a CPC_MSG
+ * this value can be defined by the customer, but has to be
+ * >= 64 bytes
+ * however, if not defined before, we set a length of 64 byte
+ */
#if !defined(CPC_MSG_LEN) || (CPC_MSG_LEN < 64)
#undef CPC_MSG_LEN
#define CPC_MSG_LEN 64
#endif

-// check the operating system used
-#ifdef _WIN32 // running a Windows OS
-
-// define basic types on Windows platforms
-#ifdef _MSC_VER // Visual Studio
- typedef unsigned __int8 u8;
- typedef unsigned __int16 u16;
- typedef unsigned __int32 u32;
-#else // Borland Compiler
- typedef unsigned char u8;
- typedef unsigned short u16;
- typedef unsigned int u32;
-#endif
- // on Windows OS we use a byte alignment of 1
- #pragma pack(push, 1)
-
- // set the calling conventions for the library function calls
- #define CALL_CONV __stdcall
-#else
- // Kernel headers already define this types
- #ifndef __KERNEL__
- // define basic types
- typedef unsigned char u8;
- typedef unsigned short u16;
- typedef unsigned int u32;
- #endif
-
- // Linux does not use this calling convention
- #define CALL_CONV
-#endif
-
-// Transmission of events from CPC interfaces to PC can be individually
-// controlled per event type. Default state is: don't transmit
-// Control values are constructed by bit-or of Subject and Action
-// and passed to CPC_Control()
+/* Transmission of events from CPC interfaces to PC can be individually
+ * controlled per event type. Default state is: don't transmit
+ * Control values are constructed by bit-or of Subject and Action
+ * and passed to CPC_Control()
+ */

-// Control-Values for CPC_Control() Command Subject Selection
+/* Control-Values for CPC_Control() Command Subject Selection */
#define CONTR_CAN_Message 0x04
#define CONTR_Busload 0x08
#define CONTR_CAN_State 0x0C
#define CONTR_SendAck 0x10
#define CONTR_Filter 0x14
-#define CONTR_CmdQueue 0x18 // reserved, do not use
+#define CONTR_CmdQueue 0x18 /* reserved, do not use */
#define CONTR_BusError 0x1C

-// Control Command Actions
+/* Control Command Actions */
#define CONTR_CONT_OFF 0
#define CONTR_CONT_ON 1
#define CONTR_SING_ON 2
-// CONTR_SING_ON doesn't change CONTR_CONT_ON state, so it should be
-// read as: transmit at least once
+/* CONTR_SING_ON doesn't change CONTR_CONT_ON state, so it should be
+ * read as: transmit at least once
+ */

-// defines for confirmed request
+/* defines for confirmed request */
#define DO_NOT_CONFIRM 0
#define DO_CONFIRM 1

-// event flags
+/* event flags */
#define EVENT_READ 0x01
#define EVENT_WRITE 0x02

-// Messages from CPC to PC contain a message object type field.
-// The following message types are sent by CPC and can be used in
-// handlers, others should be ignored.
-#define CPC_MSG_T_RESYNC 0 // Normally to be ignored
-#define CPC_MSG_T_CAN 1 // CAN data frame
-#define CPC_MSG_T_BUSLOAD 2 // Busload message
-#define CPC_MSG_T_STRING 3 // Normally to be ignored
-#define CPC_MSG_T_CONTI 4 // Normally to be ignored
-#define CPC_MSG_T_MEM 7 // Normally not to be handled
-#define CPC_MSG_T_RTR 8 // CAN remote frame
-#define CPC_MSG_T_TXACK 9 // Send acknowledge
-#define CPC_MSG_T_POWERUP 10 // Power-up message
-#define CPC_MSG_T_CMD_NO 11 // Normally to be ignored
-#define CPC_MSG_T_CAN_PRMS 12 // Actual CAN parameters
-#define CPC_MSG_T_ABORTED 13 // Command aborted message
-#define CPC_MSG_T_CANSTATE 14 // CAN state message
-#define CPC_MSG_T_RESET 15 // used to reset CAN-Controller
-#define CPC_MSG_T_XCAN 16 // XCAN data frame
-#define CPC_MSG_T_XRTR 17 // XCAN remote frame
-#define CPC_MSG_T_INFO 18 // information strings
-#define CPC_MSG_T_CONTROL 19 // used for control of interface/driver behaviour
-#define CPC_MSG_T_CONFIRM 20 // response type for confirmed requests
-#define CPC_MSG_T_OVERRUN 21 // response type for overrun conditions
-#define CPC_MSG_T_KEEPALIVE 22 // response type for keep alive conditions
-#define CPC_MSG_T_CANERROR 23 // response type for bus error conditions
-#define CPC_MSG_T_DISCONNECTED 24 // response type for a disconnected interface
-#define CPC_MSG_T_ERR_COUNTER 25 // RX/TX error counter of CAN controller
-
-#define CPC_MSG_T_FIRMWARE 100 // response type for USB firmware download
-
-// Messages from the PC to the CPC interface contain a command field
-// Most of the command types are wrapped by the library functions and have therefore
-// normally not to be used.
-// However, programmers who wish to circumvent the library and talk directly
-// to the drivers (mainly Linux programmers) can use the following
-// command types:
-
-#define CPC_CMD_T_CAN 1 // CAN data frame
-#define CPC_CMD_T_CONTROL 3 // used for control of interface/driver behaviour
-#define CPC_CMD_T_CAN_PRMS 6 // set CAN parameters
-#define CPC_CMD_T_CLEARBUF 8 // clears input queue; this is depricated, use CPC_CMD_T_CLEAR_MSG_QUEUE instead
-#define CPC_CMD_T_INQ_CAN_PARMS 11 // inquire actual CAN parameters
-#define CPC_CMD_T_FILTER_PRMS 12 // set filter parameter
-#define CPC_CMD_T_RTR 13 // CAN remote frame
-#define CPC_CMD_T_CANSTATE 14 // CAN state message
-#define CPC_CMD_T_XCAN 15 // XCAN data frame
-#define CPC_CMD_T_XRTR 16 // XCAN remote frame
-#define CPC_CMD_T_RESET 17 // used to reset CAN-Controller
-#define CPC_CMD_T_INQ_INFO 18 // miscellanous information strings
-#define CPC_CMD_T_OPEN_CHAN 19 // open a channel
-#define CPC_CMD_T_CLOSE_CHAN 20 // close a channel
-#define CPC_CMD_T_CNTBUF 21 // this is depricated, use CPC_CMD_T_INQ_MSG_QUEUE_CNT instead
-#define CPC_CMD_T_CAN_EXIT 200 // exit the CAN (disable interrupts; reset bootrate; reset output_cntr; mode = 1)
-
-#define CPC_CMD_T_INQ_MSG_QUEUE_CNT CPC_CMD_T_CNTBUF // inquires the count of elements in the message queue
-#define CPC_CMD_T_INQ_ERR_COUNTER 25 // request the CAN controllers error counter
-#define CPC_CMD_T_CLEAR_MSG_QUEUE CPC_CMD_T_CLEARBUF // clear CPC_MSG queue
-#define CPC_CMD_T_CLEAR_CMD_QUEUE 28 // clear CPC_CMD queue
-#define CPC_CMD_T_FIRMWARE 100 // reserved, must not be used
-#define CPC_CMD_T_USB_RESET 101 // reserved, must not be used
-#define CPC_CMD_T_WAIT_NOTIFY 102 // reserved, must not be used
-#define CPC_CMD_T_WAIT_SETUP 103 // reserved, must not be used
-#define CPC_CMD_T_ABORT 255 // Normally not to be used
-
-// definitions for CPC_MSG_T_INFO
-// information sources
+/* Messages from CPC to PC contain a message object type field.
+ * The following message types are sent by CPC and can be used in
+ * handlers, others should be ignored.
+ */
+#define CPC_MSG_T_RESYNC 0 /* Normally to be ignored */
+#define CPC_MSG_T_CAN 1 /* CAN data frame */
+#define CPC_MSG_T_BUSLOAD 2 /* Busload message */
+#define CPC_MSG_T_STRING 3 /* Normally to be ignored */
+#define CPC_MSG_T_CONTI 4 /* Normally to be ignored */
+#define CPC_MSG_T_MEM 7 /* Normally not to be handled */
+#define CPC_MSG_T_RTR 8 /* CAN remote frame */
+#define CPC_MSG_T_TXACK 9 /* Send acknowledge */
+#define CPC_MSG_T_POWERUP 10 /* Power-up message */
+#define CPC_MSG_T_CMD_NO 11 /* Normally to be ignored */
+#define CPC_MSG_T_CAN_PRMS 12 /* Actual CAN parameters */
+#define CPC_MSG_T_ABORTED 13 /* Command aborted message */
+#define CPC_MSG_T_CANSTATE 14 /* CAN state message */
+#define CPC_MSG_T_RESET 15 /* used to reset CAN-Controller */
+#define CPC_MSG_T_XCAN 16 /* XCAN data frame */
+#define CPC_MSG_T_XRTR 17 /* XCAN remote frame */
+#define CPC_MSG_T_INFO 18 /* information strings */
+#define CPC_MSG_T_CONTROL 19 /* used for control of interface/driver behaviour */
+#define CPC_MSG_T_CONFIRM 20 /* response type for confirmed requests */
+#define CPC_MSG_T_OVERRUN 21 /* response type for overrun conditions */
+#define CPC_MSG_T_KEEPALIVE 22 /* response type for keep alive conditions */
+#define CPC_MSG_T_CANERROR 23 /* response type for bus error conditions */
+#define CPC_MSG_T_DISCONNECTED 24 /* response type for a disconnected interface */
+#define CPC_MSG_T_ERR_COUNTER 25 /* RX/TX error counter of CAN controller */
+
+#define CPC_MSG_T_FIRMWARE 100 /* response type for USB firmware download */
+
+/* Messages from the PC to the CPC interface contain a command field
+ * Most of the command types are wrapped by the library functions and have therefore
+ * normally not to be used.
+ * However, programmers who wish to circumvent the library and talk directly
+ * to the drivers (mainly Linux programmers) can use the following
+ * command types:
+ */
+#define CPC_CMD_T_CAN 1 /* CAN data frame */
+#define CPC_CMD_T_CONTROL 3 /* used for control of interface/driver behaviour */
+#define CPC_CMD_T_CAN_PRMS 6 /* set CAN parameters */
+#define CPC_CMD_T_CLEARBUF 8 /* clears input queue; this is depricated, use CPC_CMD_T_CLEAR_MSG_QUEUE instead */
+#define CPC_CMD_T_INQ_CAN_PARMS 11 /* inquire actual CAN parameters */
+#define CPC_CMD_T_FILTER_PRMS 12 /* set filter parameter */
+#define CPC_CMD_T_RTR 13 /* CAN remote frame */
+#define CPC_CMD_T_CANSTATE 14 /* CAN state message */
+#define CPC_CMD_T_XCAN 15 /* XCAN data frame */
+#define CPC_CMD_T_XRTR 16 /* XCAN remote frame */
+#define CPC_CMD_T_RESET 17 /* used to reset CAN-Controller */
+#define CPC_CMD_T_INQ_INFO 18 /* miscellanous information strings */
+#define CPC_CMD_T_OPEN_CHAN 19 /* open a channel */
+#define CPC_CMD_T_CLOSE_CHAN 20 /* close a channel */
+#define CPC_CMD_T_CNTBUF 21 /* this is depricated, use CPC_CMD_T_INQ_MSG_QUEUE_CNT instead */
+#define CPC_CMD_T_CAN_EXIT 200 /* exit the CAN (disable interrupts; reset bootrate; reset output_cntr; mode = 1) */
+
+#define CPC_CMD_T_INQ_MSG_QUEUE_CNT CPC_CMD_T_CNTBUF /* inquires the count of elements in the message queue */
+#define CPC_CMD_T_INQ_ERR_COUNTER 25 /* request the CAN controllers error counter */
+#define CPC_CMD_T_CLEAR_MSG_QUEUE CPC_CMD_T_CLEARBUF /* clear CPC_MSG queue */
+#define CPC_CMD_T_CLEAR_CMD_QUEUE 28 /* clear CPC_CMD queue */
+#define CPC_CMD_T_FIRMWARE 100 /* reserved, must not be used */
+#define CPC_CMD_T_USB_RESET 101 /* reserved, must not be used */
+#define CPC_CMD_T_WAIT_NOTIFY 102 /* reserved, must not be used */
+#define CPC_CMD_T_WAIT_SETUP 103 /* reserved, must not be used */
+#define CPC_CMD_T_ABORT 255 /* Normally not to be used */
+
+/* definitions for CPC_MSG_T_INFO information sources */
#define CPC_INFOMSG_T_UNKNOWN_SOURCE 0
#define CPC_INFOMSG_T_INTERFACE 1
#define CPC_INFOMSG_T_DRIVER 2
#define CPC_INFOMSG_T_LIBRARY 3

-// information types
+/* information types */
#define CPC_INFOMSG_T_UNKNOWN_TYPE 0
#define CPC_INFOMSG_T_VERSION 1
#define CPC_INFOMSG_T_SERIAL 2

-// definitions for controller types
-#define PCA82C200 1 // Philips basic CAN controller, replaced by SJA1000
-#define SJA1000 2 // Philips basic CAN controller
-#define AN82527 3 // Intel full CAN controller
-#define M16C_BASIC 4 // M16C controller running in basic CAN (not full CAN) mode
-
-// channel open error codes
-#define CPC_ERR_NO_FREE_CHANNEL -1 // no more free space within the channel array
-#define CPC_ERR_CHANNEL_ALREADY_OPEN -2 // the channel is already open
-#define CPC_ERR_CHANNEL_NOT_ACTIVE -3 // access to a channel not active failed
-#define CPC_ERR_NO_DRIVER_PRESENT -4 // no driver at the location searched by the library
-#define CPC_ERR_NO_INIFILE_PRESENT -5 // the library could not find the inifile
-#define CPC_ERR_WRONG_PARAMETERS -6 // wrong parameters in the inifile
-#define CPC_ERR_NO_INTERFACE_PRESENT -7 // 1. The specified interface is not connected
- // 2. The interface (mostly CPC-USB) was disconnected upon operation
-#define CPC_ERR_NO_MATCHING_CHANNEL -8 // the driver couldn't find a matching channel
-#define CPC_ERR_NO_BUFFER_AVAILABLE -9 // the driver couldn't allocate buffer for messages
-#define CPC_ERR_NO_INTERRUPT -10 // the requested interrupt couldn't be claimed
-#define CPC_ERR_NO_MATCHING_INTERFACE -11 // no interface type related to this channel was found
-#define CPC_ERR_NO_RESOURCES -12 // the requested resources could not be claimed
-#define CPC_ERR_SOCKET -13 // error concerning TCP sockets
-
-// init error codes
-#define CPC_ERR_WRONG_CONTROLLER_TYPE -14 // wrong CAN controller type within initialization
-#define CPC_ERR_NO_RESET_MODE -15 // the controller could not be set into reset mode
-#define CPC_ERR_NO_CAN_ACCESS -16 // the CAN controller could not be accessed
-
-// transmit error codes
-#define CPC_ERR_CAN_WRONG_ID -20 // the provided CAN id is too big
-#define CPC_ERR_CAN_WRONG_LENGTH -21 // the provided CAN length is too long
-#define CPC_ERR_CAN_NO_TRANSMIT_BUF -22 // the transmit buffer was occupied
-#define CPC_ERR_CAN_TRANSMIT_TIMEOUT -23 // The message could not be sent within a
- // specified time
-
-// other error codes
-#define CPC_ERR_SERVICE_NOT_SUPPORTED -30 // the requested service is not supported by the interface
-#define CPC_ERR_IO_TRANSFER -31 // a transmission error down to the driver occurred
-#define CPC_ERR_TRANSMISSION_FAILED -32 // a transmission error down to the interface occurred
-#define CPC_ERR_TRANSMISSION_TIMEOUT -33 // a timeout occurred within transmission to the interface
-#define CPC_ERR_OP_SYS_NOT_SUPPORTED -35 // the operating system is not supported
-#define CPC_ERR_UNKNOWN -40 // an unknown error ocurred (mostly IOCTL errors)
-
-#define CPC_ERR_LOADING_DLL -50 // the library 'cpcwin.dll' could not be loaded
-#define CPC_ERR_ASSIGNING_FUNCTION -51 // the specified function could not be assigned
-#define CPC_ERR_DLL_INITIALIZATION -52 // the DLL was not initialized correctly
-#define CPC_ERR_MISSING_LICFILE -55 // the file containing the licenses does not exist
-#define CPC_ERR_MISSING_LICENSE -56 // a required license was not found
-
-// CAN state bit values. Ignore any bits not listed
+/* definitions for controller types */
+#define PCA82C200 1 /* Philips basic CAN controller, replaced by SJA1000 */
+#define SJA1000 2 /* Philips basic CAN controller */
+#define AN82527 3 /* Intel full CAN controller */
+#define M16C_BASIC 4 /* M16C controller running in basic CAN (not full CAN) mode */
+
+/* channel open error codes */
+#define CPC_ERR_NO_FREE_CHANNEL -1 /* no more free space within the channel array */
+#define CPC_ERR_CHANNEL_ALREADY_OPEN -2 /* the channel is already open */
+#define CPC_ERR_CHANNEL_NOT_ACTIVE -3 /* access to a channel not active failed */
+#define CPC_ERR_NO_DRIVER_PRESENT -4 /* no driver at the location searched by the library */
+#define CPC_ERR_NO_INIFILE_PRESENT -5 /* the library could not find the inifile */
+#define CPC_ERR_WRONG_PARAMETERS -6 /* wrong parameters in the inifile */
+#define CPC_ERR_NO_INTERFACE_PRESENT -7 /* 1. The specified interface is not connected */
+ /* 2. The interface (mostly CPC-USB) was disconnected upon operation */
+#define CPC_ERR_NO_MATCHING_CHANNEL -8 /* the driver couldn't find a matching channel */
+#define CPC_ERR_NO_BUFFER_AVAILABLE -9 /* the driver couldn't allocate buffer for messages */
+#define CPC_ERR_NO_INTERRUPT -10 /* the requested interrupt couldn't be claimed */
+#define CPC_ERR_NO_MATCHING_INTERFACE -11 /* no interface type related to this channel was found */
+#define CPC_ERR_NO_RESOURCES -12 /* the requested resources could not be claimed */
+#define CPC_ERR_SOCKET -13 /* error concerning TCP sockets */
+
+/* init error codes */
+#define CPC_ERR_WRONG_CONTROLLER_TYPE -14 /* wrong CAN controller type within initialization */
+#define CPC_ERR_NO_RESET_MODE -15 /* the controller could not be set into reset mode */
+#define CPC_ERR_NO_CAN_ACCESS -16 /* the CAN controller could not be accessed */
+
+/* transmit error codes */
+#define CPC_ERR_CAN_WRONG_ID -20 /* the provided CAN id is too big */
+#define CPC_ERR_CAN_WRONG_LENGTH -21 /* the provided CAN length is too long */
+#define CPC_ERR_CAN_NO_TRANSMIT_BUF -22 /* the transmit buffer was occupied */
+#define CPC_ERR_CAN_TRANSMIT_TIMEOUT -23 /* The message could not be sent within a */
+ /* specified time */
+
+/* other error codes */
+#define CPC_ERR_SERVICE_NOT_SUPPORTED -30 /* the requested service is not supported by the interface */
+#define CPC_ERR_IO_TRANSFER -31 /* a transmission error down to the driver occurred */
+#define CPC_ERR_TRANSMISSION_FAILED -32 /* a transmission error down to the interface occurred */
+#define CPC_ERR_TRANSMISSION_TIMEOUT -33 /* a timeout occurred within transmission to the interface */
+#define CPC_ERR_OP_SYS_NOT_SUPPORTED -35 /* the operating system is not supported */
+#define CPC_ERR_UNKNOWN -40 /* an unknown error ocurred (mostly IOCTL errors) */
+
+#define CPC_ERR_LOADING_DLL -50 /* the library 'cpcwin.dll' could not be loaded */
+#define CPC_ERR_ASSIGNING_FUNCTION -51 /* the specified function could not be assigned */
+#define CPC_ERR_DLL_INITIALIZATION -52 /* the DLL was not initialized correctly */
+#define CPC_ERR_MISSING_LICFILE -55 /* the file containing the licenses does not exist */
+#define CPC_ERR_MISSING_LICENSE -56 /* a required license was not found */
+
+/* CAN state bit values. Ignore any bits not listed */
#define CPC_CAN_STATE_BUSOFF 0x80
#define CPC_CAN_STATE_ERROR 0x40

-// Mask to help ignore undefined bits
+/* Mask to help ignore undefined bits */
#define CPC_CAN_STATE_MASK 0xc0

-// CAN-Message representation in a CPC_MSG
-// Message object type is CPC_MSG_T_CAN or CPC_MSG_T_RTR
-// or CPC_MSG_T_XCAN or CPC_MSG_T_XRTR
+/* CAN-Message representation in a CPC_MS
+ * Message object type is CPC_MSG_T_CAN or CPC_MSG_T_RTR
+ * or CPC_MSG_T_XCAN or CPC_MSG_T_XRTR
+ */
typedef struct CPC_CAN_MSG {
u32 id;
u8 length;
u8 msg[8];
} CPC_CAN_MSG_T;

-
-// representation of the CAN parameters for the PCA82C200 controller
+/* representation of the CAN parameters for the PCA82C200 controller */
typedef struct CPC_PCA82C200_PARAMS {
- u8 acc_code; // Acceptance-code for receive, Standard: 0
- u8 acc_mask; // Acceptance-mask for receive, Standard: 0xff (everything)
- u8 btr0; // Bus-timing register 0
- u8 btr1; // Bus-timing register 1
- u8 outp_contr; // Output-control register
+ u8 acc_code; /* Acceptance-code for receive, Standard: 0 */
+ u8 acc_mask; /* Acceptance-mask for receive, Standard: 0xff (everything) */
+ u8 btr0; /* Bus-timing register 0 */
+ u8 btr1; /* Bus-timing register 1 */
+ u8 outp_contr; /* Output-control register */
} CPC_PCA82C200_PARAMS_T;

-// representation of the CAN parameters for the SJA1000 controller
+/* representation of the CAN parameters for the SJA1000 controller */
typedef struct CPC_SJA1000_PARAMS {
- u8 mode; // enables single or dual acceptance filtering
- u8 acc_code0; // Acceptance-code for receive, Standard: 0
+ u8 mode; /* enables single or dual acceptance filtering */
+ u8 acc_code0; /* Acceptance-code for receive, Standard: 0 */
u8 acc_code1;
u8 acc_code2;
u8 acc_code3;
- u8 acc_mask0; // Acceptance-mask for receive, Standard: 0xff (everything)
+ u8 acc_mask0; /* Acceptance-mask for receive, Standard: 0xff (everything) */
u8 acc_mask1;
u8 acc_mask2;
u8 acc_mask3;
- u8 btr0; // Bus-timing register 0
- u8 btr1; // Bus-timing register 1
- u8 outp_contr; // Output-control register
+ u8 btr0; /* Bus-timing register 0 */
+ u8 btr1; /* Bus-timing register 1 */
+ u8 outp_contr; /* Output-control register */
} CPC_SJA1000_PARAMS_T;

-// representation of the CAN parameters for the M16C controller
-// in basic CAN mode (means no full CAN)
+/* representation of the CAN parameters for the M16C controller
+ * in basic CAN mode (means no full CAN)
+ */
typedef struct CPC_M16C_BASIC_PARAMS {
u8 con0;
u8 con1;
@@ -267,9 +240,9 @@ typedef struct CPC_M16C_BASIC_PARAMS {
u8 acc_ext_mask3;
} CPC_M16C_BASIC_PARAMS_T;

-// CAN params message representation
+/* CAN params message representation */
typedef struct CPC_CAN_PARAMS {
- u8 cc_type; // represents the controller type
+ u8 cc_type; /* represents the controller type */
union {
CPC_M16C_BASIC_PARAMS_T m16c_basic;
CPC_SJA1000_PARAMS_T sja1000;
@@ -277,111 +250,102 @@ typedef struct CPC_CAN_PARAMS {
} cc_params;
} CPC_CAN_PARAMS_T;

-// the following structures are slightly different for Windows and Linux
-// To be able to use the 'Select' mechanism with Linux the application
-// needs to know the devices file desciptor.
-// This mechanism is not implemented within Windows and the file descriptor
-// is therefore not needed
-#ifdef _WIN32
-
-// CAN init params message representation
-typedef struct CPC_INIT_PARAMS {
- CPC_CAN_PARAMS_T canparams;
-} CPC_INIT_PARAMS_T;
-
-#else// Linux
-
-// CHAN init params representation
+/* CHAN init params representation */
typedef struct CPC_CHAN_PARAMS {
int fd;
} CPC_CHAN_PARAMS_T;

-// CAN init params message representation
+/* CAN init params message representation */
typedef struct CPC_INIT_PARAMS {
CPC_CHAN_PARAMS_T chanparams;
CPC_CAN_PARAMS_T canparams;
} CPC_INIT_PARAMS_T;

-#endif
-
-// structure for confirmed message handling
+/* structure for confirmed message handling */
typedef struct CPC_CONFIRM {
- u8 result; // error code
+ u8 result; /* error code */
} CPC_CONFIRM_T;

-// structure for information requests
+/* structure for information requests */
typedef struct CPC_INFO {
- u8 source; // interface, driver or library
- u8 type; // version or serial number
- char msg[CPC_MSG_LEN - 2]; // string holding the requested information
+ u8 source; /* interface, driver or library */
+ u8 type; /* version or serial number */
+ char msg[CPC_MSG_LEN - 2]; /* string holding the requested information */
} CPC_INFO_T;

-// OVERRUN ///////////////////////////////////////
-// In general two types of overrun may occur.
-// A hardware overrun, where the CAN controller
-// lost a message, because the interrupt was
-// not handled before the next messgae comes in.
-// Or a software overrun, where i.e. a received
-// message could not be stored in the CPC_MSG
-// buffer.
-
-// After a software overrun has occurred
-// we wait until we have CPC_OVR_GAP slots
-// free in the CPC_MSG buffer.
+/* OVERRUN
+ * In general two types of overrun may occur.
+ * A hardware overrun, where the CAN controller
+ * lost a message, because the interrupt was
+ * not handled before the next messgae comes in.
+ * Or a software overrun, where i.e. a received
+ * message could not be stored in the CPC_MSG
+ * buffer.
+ */
+
+/* After a software overrun has occurred
+ * we wait until we have CPC_OVR_GAP slots
+ * free in the CPC_MSG buffer.
+ */
#define CPC_OVR_GAP 10

-// Two types of software overrun may occur.
-// A received CAN message or a CAN state event
-// can cause an overrun.
-// Note: A CPC_CMD which would normally store
-// its result immediately in the CPC_MSG
-// queue may fail, because the message queue is full.
-// This will not generate an overrun message, but
-// will halt command execution, until this command
-// is able to store its message in the message queue.
+/* Two types of software overrun may occur.
+ * A received CAN message or a CAN state event
+ * can cause an overrun.
+ * Note: A CPC_CMD which would normally store
+ * its result immediately in the CPC_MSG
+ * queue may fail, because the message queue is full.
+ * This will not generate an overrun message, but
+ * will halt command execution, until this command
+ * is able to store its message in the message queue.
+ */
#define CPC_OVR_EVENT_CAN 0x01
#define CPC_OVR_EVENT_CANSTATE 0x02
#define CPC_OVR_EVENT_BUSERROR 0x04

-// If the CAN controller lost a message
-// we indicate it with the highest bit
-// set in the count field.
+/* If the CAN controller lost a message
+ * we indicate it with the highest bit
+ * set in the count field.
+ */
#define CPC_OVR_HW 0x80

-// structure for overrun conditions
+/* structure for overrun conditions */
typedef struct {
u8 event;
u8 count;
} CPC_OVERRUN_T;

-// CAN errors ////////////////////////////////////
-// Each CAN controller type has different
-// registers to record errors.
-// Therefor a structure containing the specific
-// errors is set up for each controller here
+/* CAN errors
+ * Each CAN controller type has different
+ * registers to record errors.
+ * Therefor a structure containing the specific
+ * errors is set up for each controller here
+ */

-// SJA1000 error structure
-// see the SJA1000 datasheet for detailed
-// explanation of the registers
+/* SJA1000 error structure
+ * see the SJA1000 datasheet for detailed
+ * explanation of the registers
+ */
typedef struct CPC_SJA1000_CAN_ERROR {
- u8 ecc; // error capture code register
- u8 rxerr; // RX error counter register
- u8 txerr; // TX error counter register
+ u8 ecc; /* error capture code register */
+ u8 rxerr; /* RX error counter register */
+ u8 txerr; /* TX error counter register */
} CPC_SJA1000_CAN_ERROR_T;

-// M16C error structure
-// see the M16C datasheet for detailed
-// explanation of the registers
+/* M16C error structure
+ * see the M16C datasheet for detailed
+ * explanation of the registers
+ */
typedef struct CPC_M16C_CAN_ERROR {
- u8 tbd; // to be defined
+ u8 tbd; /* to be defined */
} CPC_M16C_CAN_ERROR_T;

-// structure for CAN error conditions
+/* structure for CAN error conditions */
#define CPC_CAN_ECODE_ERRFRAME 0x01
typedef struct CPC_CAN_ERROR {
u8 ecode;
struct {
- u8 cc_type; // CAN controller type
+ u8 cc_type; /* CAN controller type */
union {
CPC_SJA1000_CAN_ERROR_T sja1000;
CPC_M16C_CAN_ERROR_T m16c;
@@ -389,36 +353,38 @@ typedef struct CPC_CAN_ERROR {
} cc;
} CPC_CAN_ERROR_T;

-// Structure containing RX/TX error counter.
-// This structure is used to request the
-// values of the CAN controllers TX and RX
-// error counter.
+/* Structure containing RX/TX error counter.
+ * This structure is used to request the
+ * values of the CAN controllers TX and RX
+ * error counter.
+ */
typedef struct CPC_CAN_ERR_COUNTER {
u8 rx;
u8 tx;
} CPC_CAN_ERR_COUNTER_T;

-// If this flag is set, transmissions from PC to CPC are protected against loss
+/* If this flag is set, transmissions from PC to CPC are protected against loss */
#define CPC_SECURE_TO_CPC 0x01

-// If this flag is set, transmissions from CPC to PC are protected against loss
+/* If this flag is set, transmissions from CPC to PC are protected against loss */
#define CPC_SECURE_TO_PC 0x02

-// If this flag is set, the CAN-transmit buffer is checked to be free before sending a message
+/* If this flag is set, the CAN-transmit buffer is checked to be free before sending a message */
#define CPC_SECURE_SEND 0x04

-// If this flag is set, the transmission complete flag is checked
-// after sending a message
-// THIS IS CURRENTLY ONLY IMPLEMENTED IN THE PASSIVE INTERFACE DRIVERS
+/* If this flag is set, the transmission complete flag is checked
+ * after sending a message
+ * THIS IS CURRENTLY ONLY IMPLEMENTED IN THE PASSIVE INTERFACE DRIVERS
+ */
#define CPC_SECURE_TRANSMIT 0x08

-// main message type used between library and application
+/* main message type used between library and application */
typedef struct CPC_MSG {
- u8 type; // type of message
- u8 length; // length of data within union 'msg'
- u8 msgid; // confirmation handle
- u32 ts_sec; // timestamp in seconds
- u32 ts_nsec; // timestamp in nano seconds
+ u8 type; /* type of message */
+ u8 length; /* length of data within union 'msg' */
+ u8 msgid; /* confirmation handle */
+ u32 ts_sec; /* timestamp in seconds */
+ u32 ts_nsec; /* timestamp in nano seconds */
union {
u8 generic[CPC_MSG_LEN];
CPC_CAN_MSG_T canmsg;
@@ -433,8 +399,4 @@ typedef struct CPC_MSG {
} msg;
} CPC_MSG_T;

-#ifdef _WIN32
-#pragma pack(pop) // reset the byte alignment
-#endif
-
-#endif // CPC_HEADER
+#endif /* CPC_HEADER */
--
1.6.4.rc1


\
 
 \ /
  Last update: 2009-07-21 14:57    [W:0.101 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site