lkml.org 
[lkml]   [2009]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [lm-sensors] [PATCH] hwmon: Add WM835x PMIC hardware monitoring driver
Hi Mark,

Sorry for the delay. Thanks Jonathan for the 1st review!

On Fri, 17 Jul 2009 21:33:15 +0100, Mark Brown wrote:
> This driver provides reporting of the status supply voltage rails
> of the WM835x series of PMICs via the hwmon API.
>
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> ---
> drivers/hwmon/Kconfig | 10 +++
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/wm8350-hwmon.c | 149 +++++++++++++++++++++++++++++++++++++++
> drivers/mfd/wm8350-core.c | 3 +
> include/linux/mfd/wm8350/core.h | 6 ++
> 5 files changed, 169 insertions(+), 0 deletions(-)
> create mode 100644 drivers/hwmon/wm8350-hwmon.c

Overall it looks very good and I really don't have much to say. Only
minor things, see below.

>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 2d50166..c94d708 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -920,6 +920,16 @@ config SENSORS_W83627EHF
> This driver can also be built as a module. If so, the module
> will be called w83627ehf.
>
> +config SENSORS_WM8350
> + tristate "Wolfson Microelectronics WM835x"
> + depends on MFD_WM8350
> + help
> + If you say yes here you get support for the hardware
> + monitoring features of the WM835x series of PMICs.
> +
> + This driver can also be built as a module. If so, the module
> + will be called wm8350-hwmon.
> +
> config SENSORS_ULTRA45
> tristate "Sun Ultra45 PIC16F747"
> depends on SPARC64
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index b793dce..c02e90e 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -89,6 +89,7 @@ obj-$(CONFIG_SENSORS_VT8231) += vt8231.o
> obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o
> obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
> obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
> +obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
>
> ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
> EXTRA_CFLAGS += -DDEBUG
> diff --git a/drivers/hwmon/wm8350-hwmon.c b/drivers/hwmon/wm8350-hwmon.c
> new file mode 100644
> index 0000000..7387620
> --- /dev/null
> +++ b/drivers/hwmon/wm8350-hwmon.c
> @@ -0,0 +1,149 @@
> +/*
> + * drivers/hwmon/wm8350-hwmon.c - Wolfson Microelectroncis WM8350 PMIC

Typo: Microelectronics.

> + * hardware monitoring features.
> + *
> + * Copyright (C) 2009 Wolfson Microelectronics plc
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License v2 as published by the
> + * Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program; if not, write to the Free Software Foundation, Inc.,
> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +
> +#include <linux/mfd/wm8350/core.h>
> +#include <linux/mfd/wm8350/comparator.h>
> +
> +static ssize_t show_name(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + return sprintf(buf, "wm8350\n");
> +}
> +
> +static const char *input_names[] = {
> + [WM8350_AUXADC_USB] = "USB" ,
> + [WM8350_AUXADC_LINE] = "Line" ,

Coding-style: extra spaces before commas.

> + [WM8350_AUXADC_BATT] = "Battery",
> +};
> +
> +
> +static ssize_t show_voltage(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct wm8350 *wm8350 = dev_get_drvdata(dev);
> + int channel = to_sensor_dev_attr(attr)->index;
> + int val;
> +
> + val = wm8350_read_auxadc(wm8350, channel, 0, 0)
> + * WM8350_AUX_COEFF / 1000;

You may obtain more accurate values with DIV_ROUND_CLOSEST().

> +
> + return sprintf(buf, "%d\n", val);
> +}
> +
> +static ssize_t show_label(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + int channel = to_sensor_dev_attr(attr)->index;
> +
> + return sprintf(buf, "%s\n", input_names[channel]);
> +}
> +
> +#define WM8350_NAMED_VOLTAGE(id, name) \
> + static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage,\
> + NULL, WM8350_AUXADC_##name); \
> + static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label, \
> + NULL, WM8350_AUXADC_##name)
> +
> +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
> +
> +WM8350_NAMED_VOLTAGE(0, USB);
> +WM8350_NAMED_VOLTAGE(1, BATT);
> +WM8350_NAMED_VOLTAGE(2, LINE);

I would suggest passing the whole WM8350_AUXADC_USB, etc. string as the
2nd parameter. This makes grepping the source code for users (as LXR
does for example) possible.

> +
> +static struct attribute *wm8350_attributes[] = {
> + &dev_attr_name.attr,
> +
> + &sensor_dev_attr_in0_input.dev_attr.attr,
> + &sensor_dev_attr_in0_label.dev_attr.attr,
> + &sensor_dev_attr_in1_input.dev_attr.attr,
> + &sensor_dev_attr_in1_label.dev_attr.attr,
> + &sensor_dev_attr_in2_input.dev_attr.attr,
> + &sensor_dev_attr_in2_label.dev_attr.attr,
> +
> + NULL,
> +};
> +
> +static const struct attribute_group wm8350_attr_group = {
> + .attrs = wm8350_attributes,
> +};
> +
> +static int __devinit wm8350_hwmon_probe(struct platform_device *pdev)
> +{
> + struct wm8350 *wm8350 = platform_get_drvdata(pdev);
> + int ret;
> +
> + ret = sysfs_create_group(&pdev->dev.kobj, &wm8350_attr_group);
> + if (ret)
> + goto err;
> +
> + wm8350->hwmon.classdev = hwmon_device_register(&pdev->dev);
> + if (IS_ERR(wm8350->hwmon.classdev)) {
> + ret = PTR_ERR(wm8350->hwmon.classdev);
> + goto err_group;
> + }
> +
> + return 0;
> +
> +err_group:
> + sysfs_remove_group(&pdev->dev.kobj, &wm8350_attr_group);
> +err:
> + return ret;
> +}
> +
> +static int __devexit wm8350_hwmon_remove(struct platform_device *pdev)
> +{
> + struct wm8350 *wm8350 = platform_get_drvdata(pdev);
> +
> + hwmon_device_unregister(wm8350->hwmon.classdev);
> + sysfs_remove_group(&pdev->dev.kobj, &wm8350_attr_group);
> +
> + return 0;
> +}
> +
> +static struct platform_driver wm8350_hwmon_driver = {
> + .probe = wm8350_hwmon_probe,
> + .remove = __devexit_p(wm8350_hwmon_remove),
> + .driver = {
> + .name = "wm8350-hwmon",

I think you are supposed to set .owner to THIS_MODULE?

> + },
> +};
> +
> +static int __init wm8350_hwmon_init(void)
> +{
> + return platform_driver_register(&wm8350_hwmon_driver);
> +}
> +module_init(wm8350_hwmon_init);
> +
> +static void __exit wm8350_hwmon_exit(void)
> +{
> + platform_driver_unregister(&wm8350_hwmon_driver);
> +}
> +module_exit(wm8350_hwmon_exit);
> +
> +MODULE_AUTHOR("Mark Brown");

No e-mail address?

> +MODULE_DESCRIPTION("WM8350 Hardware Monitoring");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:wm8350-hwmon");
> diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
> index fe24079..9d662a5 100644
> --- a/drivers/mfd/wm8350-core.c
> +++ b/drivers/mfd/wm8350-core.c
> @@ -1472,6 +1472,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
> &(wm8350->codec.pdev));
> wm8350_client_dev_register(wm8350, "wm8350-gpio",
> &(wm8350->gpio.pdev));
> + wm8350_client_dev_register(wm8350, "wm8350-hwmon",
> + &(wm8350->hwmon.pdev));
> wm8350_client_dev_register(wm8350, "wm8350-power",
> &(wm8350->power.pdev));
> wm8350_client_dev_register(wm8350, "wm8350-rtc", &(wm8350->rtc.pdev));
> @@ -1498,6 +1500,7 @@ void wm8350_device_exit(struct wm8350 *wm8350)
> platform_device_unregister(wm8350->wdt.pdev);
> platform_device_unregister(wm8350->rtc.pdev);
> platform_device_unregister(wm8350->power.pdev);
> + platform_device_unregister(wm8350->hwmon.pdev);
> platform_device_unregister(wm8350->gpio.pdev);
> platform_device_unregister(wm8350->codec.pdev);
>
> diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h
> index 42cca67..969b0b5 100644
> --- a/include/linux/mfd/wm8350/core.h
> +++ b/include/linux/mfd/wm8350/core.h
> @@ -605,6 +605,11 @@ struct wm8350_irq {
> void *data;
> };
>
> +struct wm8350_hwmon {
> + struct platform_device *pdev;
> + struct device *classdev;
> +};
> +
> struct wm8350 {
> struct device *dev;
>
> @@ -629,6 +634,7 @@ struct wm8350 {
> /* Client devices */
> struct wm8350_codec codec;
> struct wm8350_gpio gpio;
> + struct wm8350_hwmon hwmon;
> struct wm8350_pmic pmic;
> struct wm8350_power power;
> struct wm8350_rtc rtc;

Bonus points if you also add a short text file at
Documentation/hwmon/wm8350-hwmon, using the same format as the other
files there, shortly explaining what hardware the driver is for, what
it is capable of (e.g. measurement resolution, accuracy and range) and,
if applicable, its limitations.

When you are done, what is your merge plan? I would be happy to take
the patch in my unofficial hwmon tree and push it in 2.6.32, but due to
wm8350-core dependencies, you may prefer it to be merged differently?

--
Jean Delvare


\
 
 \ /
  Last update: 2009-07-18 11:21    [W:0.060 / U:1.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site