lkml.org 
[lkml]   [2009]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 09/10] Staging: rtl8192su/ieee80211: ieee80211.h cleanups
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rtl8192su/ieee80211: ieee80211.h cleanups

* remove unused / duplicated definitions
* remove unused / used only once typedefs
* fix comments, remove useless ones
* convert defines to enums where appropriate
* use __func__ instead of __FUNCTION__
* make some minor coding style fixes
* misc cleanups

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/staging/rtl8192su/ieee80211/ieee80211.h | 1048 +++++++++------------
drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c | 1
drivers/staging/rtl8192su/ieee80211/ieee80211_wx.c | 6
drivers/staging/rtl8192su/r8192U_core.c | 4
4 files changed, 482 insertions(+), 577 deletions(-)

Index: b/drivers/staging/rtl8192su/ieee80211/ieee80211.h
===================================================================
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211.h
@@ -39,14 +39,6 @@
#include "rtl819x_BA.h"
#include "rtl819x_TS.h"

-#ifndef IW_MODE_MONITOR
-#define IW_MODE_MONITOR 6
-#endif
-
-#ifndef IWEVCUSTOM
-#define IWEVCUSTOM 0x8c02
-#endif
-
#define KEY_TYPE_NA 0x0
#define KEY_TYPE_WEP40 0x1
#define KEY_TYPE_TKIP 0x2
@@ -56,45 +48,31 @@
/* added for rtl819x tx procedure */
#define MAX_QUEUE_SIZE 0x10

-//
-// 8190 queue mapping
-//
-#define BK_QUEUE 0
-#define BE_QUEUE 1
-#define VI_QUEUE 2
-#define VO_QUEUE 3
-#define HCCA_QUEUE 4
-#define TXCMD_QUEUE 5
-#define MGNT_QUEUE 6
-#define HIGH_QUEUE 7
-#define BEACON_QUEUE 8
+/* 8190 queue mapping */
+enum {
+ BK_QUEUE = 0,
+ BE_QUEUE = 1,
+ VI_QUEUE = 2,
+ VO_QUEUE = 3,
+ HCCA_QUEUE = 4,
+ TXCMD_QUEUE = 5,
+ MGNT_QUEUE = 6,
+ HIGH_QUEUE = 7,
+ BEACON_QUEUE = 8,

-#define LOW_QUEUE BE_QUEUE
-#define NORMAL_QUEUE MGNT_QUEUE
+ LOW_QUEUE = BE_QUEUE,
+ NORMAL_QUEUE = MGNT_QUEUE
+};

-//added by amy for ps
#define SWRF_TIMEOUT 50

-//added by amy for LEAP related
-#define IE_CISCO_FLAG_POSITION 0x08 // Flag byte: byte 8, numbered from 0.
-#define SUPPORT_CKIP_MIC 0x08 // bit3
-#define SUPPORT_CKIP_PK 0x10 // bit4
-//added by amy for ps
-// RF Off Level for IPS or HW/SW radio off
-#define RT_RF_OFF_LEVL_ASPM BIT0 // PCI ASPM
-#define RT_RF_OFF_LEVL_CLK_REQ BIT1 // PCI clock request
-#define RT_RF_OFF_LEVL_PCI_D3 BIT2 // PCI D3 mode
-#define RT_RF_OFF_LEVL_HALT_NIC BIT3 // NIC halt, re-initialize hw parameters
-#define RT_RF_OFF_LEVL_FREE_FW BIT4 // FW free, re-download the FW
-#define RT_RF_OFF_LEVL_FW_32K BIT5 // FW in 32k
-#define RT_RF_PS_LEVEL_ALWAYS_ASPM BIT6 // Always enable ASPM and Clock Req in initialization.
-#define RT_RF_LPS_DISALBE_2R BIT30 // When LPS is on, disable 2R if no packet is received or transmittd.
-#define RT_RF_LPS_LEVEL_ASPM BIT31 // LPS with ASPM
-#define RT_IN_PS_LEVEL(pPSC, _PS_FLAG) ((pPSC->CurPsLevel & _PS_FLAG) ? true : false)
-#define RT_CLEAR_PS_LEVEL(pPSC, _PS_FLAG) (pPSC->CurPsLevel &= (~(_PS_FLAG)))
-#define RT_SET_PS_LEVEL(pPSC, _PS_FLAG) (pPSC->CurPsLevel->CurPsLevel |= _PS_FLAG)
-/* defined for skb cb field */
-/* At most 28 byte */
+/* LEAP related */
+/* Flag byte: byte 8, numbered from 0. */
+#define IE_CISCO_FLAG_POSITION 0x08
+#define SUPPORT_CKIP_MIC 0x08 /* bit3 */
+#define SUPPORT_CKIP_PK 0x10 /* bit4 */
+
+/* defined for skb cb field, at most 28 byte */
typedef struct cb_desc {
/* Tx Desc Related flags (8-9) */
u8 bLastIniPkt:1;
@@ -104,7 +82,7 @@ typedef struct cb_desc {
u8 bEncrypt:1;
u8 bTxDisableRateFallBack:1;
u8 bTxUseDriverAssingedRate:1;
- u8 bHwSec:1; //indicate whether use Hw security. WB
+ u8 bHwSec:1; /* indicate whether use Hw security */

u8 reserved1;

@@ -124,17 +102,13 @@ typedef struct cb_desc {
u8 bRTSUseShortGI:1;
u8 bMulticast:1;
u8 bBroadcast:1;
- //u8 reserved2:2;
u8 drv_agg_enable:1;
u8 reserved2:1;

/* Tx Desc related element(12-19) */
u8 rata_index;
u8 queue_index;
- //u8 reserved3;
- //u8 reserved4;
u16 txbuf_size;
- //u8 reserved5;
u8 RATRIndex;
u8 reserved6;
u8 reserved7;
@@ -145,63 +119,65 @@ typedef struct cb_desc {
u8 rts_rate;
u8 ampdu_factor;
u8 ampdu_density;
- //u8 reserved9;
- //u8 reserved10;
- //u8 reserved11;
u8 DrvAggrNum;
u16 pkt_size;
u8 reserved12;
-}cb_desc, *pcb_desc;
+} cb_desc, *pcb_desc;

-/*--------------------------Define -------------------------------------------*/
-#define MGN_1M 0x02
-#define MGN_2M 0x04
-#define MGN_5_5M 0x0b
-#define MGN_11M 0x16
-
-#define MGN_6M 0x0c
-#define MGN_9M 0x12
-#define MGN_12M 0x18
-#define MGN_18M 0x24
-#define MGN_24M 0x30
-#define MGN_36M 0x48
-#define MGN_48M 0x60
-#define MGN_54M 0x6c
-
-#define MGN_MCS0 0x80
-#define MGN_MCS1 0x81
-#define MGN_MCS2 0x82
-#define MGN_MCS3 0x83
-#define MGN_MCS4 0x84
-#define MGN_MCS5 0x85
-#define MGN_MCS6 0x86
-#define MGN_MCS7 0x87
-#define MGN_MCS8 0x88
-#define MGN_MCS9 0x89
-#define MGN_MCS10 0x8a
-#define MGN_MCS11 0x8b
-#define MGN_MCS12 0x8c
-#define MGN_MCS13 0x8d
-#define MGN_MCS14 0x8e
-#define MGN_MCS15 0x8f
-#define MGN_MCS0_SG 0x90
-#define MGN_MCS1_SG 0x91
-#define MGN_MCS2_SG 0x92
-#define MGN_MCS3_SG 0x93
-#define MGN_MCS4_SG 0x94
-#define MGN_MCS5_SG 0x95
-#define MGN_MCS6_SG 0x96
-#define MGN_MCS7_SG 0x97
-#define MGN_MCS8_SG 0x98
-#define MGN_MCS9_SG 0x99
-#define MGN_MCS10_SG 0x9a
-#define MGN_MCS11_SG 0x9b
-#define MGN_MCS12_SG 0x9c
-#define MGN_MCS13_SG 0x9d
-#define MGN_MCS14_SG 0x9e
-#define MGN_MCS15_SG 0x9f
+enum {
+ MGN_1M = 0x02,
+ MGN_2M = 0x04,
+ MGN_5_5M = 0x0b,
+ MGN_11M = 0x16,
+
+ MGN_6M = 0x0c,
+ MGN_9M = 0x12,
+ MGN_12M = 0x18,
+ MGN_18M = 0x24,
+ MGN_24M = 0x30,
+ MGN_36M = 0x48,
+ MGN_48M = 0x60,
+ MGN_54M = 0x6c,
+
+ MGN_MCS0 = 0x80,
+ MGN_MCS1 = 0x81,
+ MGN_MCS2 = 0x82,
+ MGN_MCS3 = 0x83,
+ MGN_MCS4 = 0x84,
+ MGN_MCS5 = 0x85,
+ MGN_MCS6 = 0x86,
+ MGN_MCS7 = 0x87,
+ MGN_MCS8 = 0x88,
+ MGN_MCS9 = 0x89,
+ MGN_MCS10 = 0x8a,
+ MGN_MCS11 = 0x8b,
+ MGN_MCS12 = 0x8c,
+ MGN_MCS13 = 0x8d,
+ MGN_MCS14 = 0x8e,
+ MGN_MCS15 = 0x8f,
+
+ MGN_MCS0_SG = 0x90,
+ MGN_MCS1_SG = 0x91,
+ MGN_MCS2_SG = 0x92,
+ MGN_MCS3_SG = 0x93,
+ MGN_MCS4_SG = 0x94,
+ MGN_MCS5_SG = 0x95,
+ MGN_MCS6_SG = 0x96,
+ MGN_MCS7_SG = 0x97,
+ MGN_MCS8_SG = 0x98,
+ MGN_MCS9_SG = 0x99,
+ MGN_MCS10_SG = 0x9a,
+ MGN_MCS11_SG = 0x9b,
+ MGN_MCS12_SG = 0x9c,
+ MGN_MCS13_SG = 0x9d,
+ MGN_MCS14_SG = 0x9e,
+ MGN_MCS15_SG = 0x9f,
+};

-#define aSifsTime (((priv->ieee80211->current_network.mode == IEEE_A)||(priv->ieee80211->current_network.mode == IEEE_N_24G)||(priv->ieee80211->current_network.mode == IEEE_N_5G))? 16 : 10)
+#define aSifsTime (((priv->ieee80211->current_network.mode == IEEE_A) || \
+ (priv->ieee80211->current_network.mode == IEEE_N_24G) || \
+ (priv->ieee80211->current_network.mode == IEEE_N_5G)) \
+ ? 16 : 10)

#define MGMT_QUEUE_NUM 5

@@ -296,7 +272,7 @@ typedef struct ieee_param {
#define IEEE80211_3ADDR_LEN 24
#define IEEE80211_4ADDR_LEN 30
#define IEEE80211_FCS_LEN 4
-#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
+#define IEEE80211_HLEN IEEE80211_4ADDR_LEN
#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
#define IEEE80211_MGMT_HDR_LEN 24
#define IEEE80211_DATA_HDR3_LEN 24
@@ -317,97 +293,96 @@ typedef struct ieee_param {
/* control */
#define IEEE80211_STYPE_BLOCKACK 0x0094

-/* data */
-#define IEEE80211_STYPE_QOS_NULL 0x00C0
-
/* QOS control */
#define IEEE80211_QCTL_TID 0x000F

-#define FC_QOS_BIT BIT7
-#define IsDataFrame(pdu) ( ((pdu[0] & 0x0C)==0x08) ? true : false )
-#define IsLegacyDataFrame(pdu) (IsDataFrame(pdu) && (!(pdu[0]&FC_QOS_BIT)) )
-//added by wb. Is this right?
-#define IsQoSDataFrame(pframe) ((*(u16*)pframe&(IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA)) == (IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA))
-#define Frame_Order(pframe) (*(u16*)pframe&IEEE80211_FCTL_ORDER)
-#define SN_LESS(a, b) (((a-b)&0x800)!=0)
-#define SN_EQUAL(a, b) (a == b)
+#define FC_QOS_BIT BIT7
+
+#define IsDataFrame(pdu) (((pdu[0] & 0x0C) == 0x08) ? true : false)
+#define IsLegacyDataFrame(pdu) (IsDataFrame(pdu) && (!(pdu[0] & FC_QOS_BIT)))
+#define IsQoSDataFrame(pframe) \
+ ((*(u16 *)pframe & (IEEE80211_STYPE_QOS_DATA | IEEE80211_FTYPE_DATA)) \
+ == (IEEE80211_STYPE_QOS_DATA | IEEE80211_FTYPE_DATA))
+
+#define Frame_Order(pframe) (*(u16 *)pframe & IEEE80211_FCTL_ORDER)
+
+#define SN_LESS(a, b) (((a - b) & 0x800) != 0)
+#define SN_EQUAL(a, b) (a == b)
+
#define MAX_DEV_ADDR_SIZE 8
-typedef enum _ACT_CATEGORY{
- ACT_CAT_QOS = 1,
- ACT_CAT_DLS = 2,
- ACT_CAT_BA = 3,
- ACT_CAT_HT = 7,
- ACT_CAT_WMM = 17,
-} ACT_CATEGORY, *PACT_CATEGORY;
-
-typedef enum _TS_ACTION{
- ACT_ADDTSREQ = 0,
- ACT_ADDTSRSP = 1,
- ACT_DELTS = 2,
- ACT_SCHEDULE = 3,
-} TS_ACTION, *PTS_ACTION;
-
-typedef enum _BA_ACTION{
- ACT_ADDBAREQ = 0,
- ACT_ADDBARSP = 1,
- ACT_DELBA = 2,
-} BA_ACTION, *PBA_ACTION;

-typedef enum _InitialGainOpType{
- IG_Backup=0,
+enum {
+ /* ACT_CATEGORY */
+ ACT_CAT_QOS = 1,
+ ACT_CAT_DLS = 2,
+ ACT_CAT_BA = 3,
+ ACT_CAT_HT = 7,
+ ACT_CAT_WMM = 17,
+
+ /* TS_ACTION */
+ ACT_ADDTSREQ = 0,
+ ACT_ADDTSRSP = 1,
+ ACT_DELTS = 2,
+ ACT_SCHEDULE = 3,
+
+ /* BA_ACTION */
+ ACT_ADDBAREQ = 0,
+ ACT_ADDBARSP = 1,
+ ACT_DELBA = 2,
+};
+
+/* InitialGainOpType */
+enum {
+ IG_Backup = 0,
IG_Restore,
IG_Max
-}InitialGainOpType;
-//added by amy for LED 090319
-//================================================================================
-// LED customization.
-//================================================================================
-typedef enum _LED_CTL_MODE{
- LED_CTL_POWER_ON = 1,
- LED_CTL_LINK = 2,
- LED_CTL_NO_LINK = 3,
- LED_CTL_TX = 4,
- LED_CTL_RX = 5,
- LED_CTL_SITE_SURVEY = 6,
- LED_CTL_POWER_OFF = 7,
- LED_CTL_START_TO_LINK = 8,
- LED_CTL_START_WPS = 9,
- LED_CTL_STOP_WPS = 10,
- LED_CTL_START_WPS_BOTTON = 11, //added for runtop
-}LED_CTL_MODE;
+};
+
+typedef enum _LED_CTL_MODE {
+ LED_CTL_POWER_ON = 1,
+ LED_CTL_LINK = 2,
+ LED_CTL_NO_LINK = 3,
+ LED_CTL_TX = 4,
+ LED_CTL_RX = 5,
+ LED_CTL_SITE_SURVEY = 6,
+ LED_CTL_POWER_OFF = 7,
+ LED_CTL_START_TO_LINK = 8,
+ LED_CTL_START_WPS = 9,
+ LED_CTL_STOP_WPS = 10,
+ LED_CTL_START_WPS_BOTTON = 11,
+} LED_CTL_MODE;

/* debug macros */
#define CONFIG_IEEE80211_DEBUG
#ifdef CONFIG_IEEE80211_DEBUG
extern u32 ieee80211_debug_level;
#define IEEE80211_DEBUG(level, fmt, args...) \
-do { if (ieee80211_debug_level & (level)) \
- printk(KERN_DEBUG "ieee80211: " fmt, ## args); } while (0)
-//wb added to debug out data buf
-//if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
-#define IEEE80211_DEBUG_DATA(level, data, datalen) \
- do{ if ((ieee80211_debug_level & (level)) == (level)) \
- { \
- int i; \
- u8* pdata = (u8*) data; \
- printk(KERN_DEBUG "ieee80211: %s()\n", __FUNCTION__); \
- for(i=0; i<(int)(datalen); i++) \
- { \
- printk("%2x ", pdata[i]); \
- if ((i+1)%16 == 0) printk("\n"); \
- } \
- printk("\n"); \
- } \
+ do { \
+ if (ieee80211_debug_level & (level)) \
+ printk(KERN_DEBUG "ieee80211: " fmt, ## args); \
+ } while (0)
+#define IEEE80211_DEBUG_DATA(level, data, datalen) \
+ do { \
+ if ((ieee80211_debug_level & (level)) == (level)) { \
+ u8 *pdata = (u8 *)data; \
+ int i; \
+ printk(KERN_DEBUG "ieee80211: %s()\n", __func__); \
+ for (i = 0; i < (int)(datalen); i++) { \
+ printk("%2x ", pdata[i]); \
+ if ((i + 1) % 16 == 0) \
+ printk("\n"); \
+ } \
+ printk("\n"); \
+ } \
} while (0)
#else
#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
#define IEEE80211_DEBUG_DATA(level, data, datalen) do {} while(0)
#endif /* CONFIG_IEEE80211_DEBUG */

-/* debug macros not dependent on CONFIG_IEEE80211_DEBUG */
-
#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
-#define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5]
+#define MAC_ARG(x) ((u8 *)(x))[0], ((u8 *)(x))[1], ((u8 *)(x))[2], \
+ ((u8 *)(x))[3], ((u8 *)(x))[4], ((u8 *)(x))[5]

/*
* To use the debug system;
@@ -447,16 +422,17 @@ do { if (ieee80211_debug_level & (level)
#define IEEE80211_DL_TX (1<<8)
#define IEEE80211_DL_RX (1<<9)

-#define IEEE80211_DL_HT (1<<10) //HT
-#define IEEE80211_DL_BA (1<<11) //ba
-#define IEEE80211_DL_TS (1<<12) //TS
-#define IEEE80211_DL_QOS (1<<13)
-#define IEEE80211_DL_REORDER (1<<14)
-#define IEEE80211_DL_IOT (1<<15)
-#define IEEE80211_DL_IPS (1<<16)
-#define IEEE80211_DL_TRACE (1<<29) //trace function, need to user net_ratelimit() together in order not to print too much to the screen
-#define IEEE80211_DL_DATA (1<<30) //use this flag to control whether print data buf out.
-#define IEEE80211_DL_ERR (1<<31) //always open
+#define IEEE80211_DL_HT (1 << 10)
+#define IEEE80211_DL_BA (1 << 11)
+#define IEEE80211_DL_TS (1 << 12)
+#define IEEE80211_DL_QOS (1 << 13)
+#define IEEE80211_DL_REORDER (1 << 14)
+#define IEEE80211_DL_IOT (1 << 15)
+#define IEEE80211_DL_IPS (1 << 16)
+#define IEEE80211_DL_TRACE (1 << 29)
+#define IEEE80211_DL_DATA (1 << 30)
+#define IEEE80211_DL_ERR (1 << 31)
+
#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
#define IEEE80211_DEBUG_INFO(f, a...) IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
@@ -515,8 +491,6 @@ struct ieee80211_snap_hdr {

#define RTL_WLAN_AUTH_LEAP 2

-#define WLAN_AUTH_CHALLENGE_LEN 128
-
#define WLAN_CAPABILITY_BSS (1<<0)
#define WLAN_CAPABILITY_SHORT_SLOT (1<<10)

@@ -610,7 +584,6 @@ struct ieee_ibss_seq {
* information for frames received. Not setting these will not cause
* any adverse affects. */
struct ieee80211_rx_stats {
-#if 1
u32 mac_time[2];
s8 rssi;
u8 signal;
@@ -624,31 +597,29 @@ struct ieee80211_rx_stats {
u64 tsf;
u32 beacon_time;
u8 nic_type;
+
u16 Length;
- // u8 DataRate; // In 0.5 Mbps
- u8 SignalQuality; // in 0-100 index.
- s32 RecvSignalPower; // Real power in dBm for this packet, no beautification and aggregation.
- s8 RxPower; // in dBm Translate from PWdB
- u8 SignalStrength; // in 0-100 index.
+ u8 SignalQuality; /* in 0-100 index */
+ /* real power in dBm for this packet, no beautification & aggregation */
+ s32 RecvSignalPower;
+ s8 RxPower; /* in dBm Translate from PWdB */
+ u8 SignalStrength; /* in 0-100 index */
u16 bHwError:1;
u16 bCRC:1;
u16 bICV:1;
u16 bShortPreamble:1;
- u16 Antenna:1; //for rtl8185
- u16 Decrypted:1; //for rtl8185, rtl8187
- u16 Wakeup:1; //for rtl8185
- u16 Reserved0:1; //for rtl8185
+ u16 Antenna:1; /* RTL8185 */
+ u16 Decrypted:1; /* RTL8185, RTL8187 */
+ u16 Wakeup:1; /* RTL8185 */
+ u16 Reserved0:1; /* RTL8185 */
u8 AGC;
u32 TimeStampLow;
u32 TimeStampHigh;
bool bShift;
- bool bIsQosData; // Added by Annie, 2005-12-22.
+ bool bIsQosData;
u8 UserPriority;

- //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
- //1Attention Please!!!<11n or 8190 specific code should be put below this line>
- //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
+ /* < 11n or 8190 specific code */
u8 RxDrvInfoSize;
u8 RxBufShift;
bool bIsAMPDU;
@@ -656,25 +627,25 @@ struct ieee80211_rx_stats {
bool bContainHTC;
bool RxIs40MHzPacket;
u32 RxPWDBAll;
- u8 RxMIMOSignalStrength[4]; // in 0~100 index
+ u8 RxMIMOSignalStrength[4]; /* in 0~100 index */
s8 RxMIMOSignalQuality[2];
bool bPacketMatchBSSID;
bool bIsCCK;
bool bPacketToSelf;
- //added by amy
- u8* virtual_address;
- u16 packetlength; // Total packet length: Must equal to sum of all FragLength
- u16 fraglength; // FragLength should equal to PacketLength in non-fragment case
- u16 fragoffset; // Data offset for this fragment
- u16 ntotalfrag;
- bool bisrxaggrsubframe;
- bool bPacketBeacon; //cosa add for rssi
- bool bToSelfBA; //cosa add for rssi
- char cck_adc_pwdb[4]; //cosa add for rx path selection
- u16 Seq_Num;
- u8 nTotalAggPkt; // Number of aggregated packets.
-#endif

+ u8 *virtual_address;
+ /* total packet length: must equal to sum of all FragLength */
+ u16 packetlength;
+ /* FragLength should equal to PacketLength in non-fragment case */
+ u16 fraglength;
+ u16 fragoffset; /* data offset for this fragment */
+ u16 ntotalfrag;
+ bool bisrxaggrsubframe;
+ bool bPacketBeacon; /* for rssi */
+ bool bToSelfBA; /* for rssi */
+ char cck_adc_pwdb[4]; /* for rx path selection */
+ u16 Seq_Num;
+ u8 nTotalAggPkt; /* number of aggregated packets */
};

/* IEEE 802.11 requires that STA supports concurrent reception of at least
@@ -729,7 +700,6 @@ struct ieee80211_device;
#define SEC_UNICAST_GROUP (1<<6)
#define SEC_LEVEL (1<<7)
#define SEC_ENABLED (1<<8)
-#define SEC_ENCRYPT (1<<9)

#define SEC_LEVEL_0 0 /* None */
#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
@@ -737,15 +707,9 @@ struct ieee80211_device;
#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
#define SEC_LEVEL_3 4 /* Level 2 + CCMP */

-#define SEC_ALG_NONE 0
-#define SEC_ALG_WEP 1
-#define SEC_ALG_TKIP 2
-#define SEC_ALG_CCMP 3
-
#define WEP_KEYS 4
#define WEP_KEY_LEN 13
#define SCM_KEY_LEN 32
-#define SCM_TEMPORAL_KEY_LENGTH 16

struct ieee80211_security {
u16 active_key:2,
@@ -773,7 +737,7 @@ Total: 28-2340 bytes
*/

/* Management Frame Information Element Types */
-enum ieee80211_mfie {
+enum {
MFIE_TYPE_SSID = 0,
MFIE_TYPE_RATES = 1,
MFIE_TYPE_FH_SET = 2,
@@ -885,7 +849,7 @@ struct ieee80211_authentication {
__le16 algorithm;
__le16 transaction;
__le16 status;
- /*challenge*/
+ /* challenge */
struct ieee80211_info_element info_element[0];
} __attribute__ ((packed));

@@ -910,9 +874,6 @@ struct ieee80211_probe_response {
struct ieee80211_info_element info_element[0];
} __attribute__ ((packed));

-/* Alias beacon for probe_response */
-#define ieee80211_beacon ieee80211_probe_response
-
struct ieee80211_assoc_request_frame {
struct ieee80211_hdr_3addr header;
__le16 capability;
@@ -949,12 +910,6 @@ struct ieee80211_txb {
struct sk_buff *fragments[0];
};

-#define MAX_TX_AGG_COUNT 16
-struct ieee80211_drv_agg_txb {
- u8 nr_drv_agg_frames;
- struct sk_buff *tx_agg_frames[MAX_TX_AGG_COUNT];
-}__attribute__((packed));
-
#define MAX_SUBFRAME_COUNT 64
struct ieee80211_rxb {
u8 nr_subframes;
@@ -973,9 +928,9 @@ typedef union _frameqos {
u16 reserved:1;
u16 txop:8;
}field;
-}frameqos,*pframeqos;
+} frameqos;

-/* SWEEP TABLE ENTRIES NUMBER*/
+/* SWEEP TABLE ENTRIES NUMBER */
#define MAX_SWEEP_TAB_ENTRIES 42
#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7
/* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
@@ -987,31 +942,25 @@ typedef union _frameqos {
#define MAX_NETWORK_COUNT 128

#define MAX_CHANNEL_NUMBER 161
-#define IEEE80211_SOFTMAC_SCAN_TIME 100
-//(HZ / 2)
+
+#define IEEE80211_SOFTMAC_SCAN_TIME 100 /* (HZ / 2) */
#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)

#define CRC_LENGTH 4U

#define MAX_WPA_IE_LEN 64

-#define NETWORK_EMPTY_ESSID (1<<0)
-#define NETWORK_HAS_OFDM (1<<1)
-#define NETWORK_HAS_CCK (1<<2)
+#define NETWORK_EMPTY_ESSID (1 << 0)
+#define NETWORK_HAS_OFDM (1 << 1)
+#define NETWORK_HAS_CCK (1 << 2)

/* QoS structure */
-#define NETWORK_HAS_QOS_PARAMETERS (1<<3)
-#define NETWORK_HAS_QOS_INFORMATION (1<<4)
-#define NETWORK_HAS_QOS_MASK (NETWORK_HAS_QOS_PARAMETERS | \
- NETWORK_HAS_QOS_INFORMATION)
-/* 802.11h */
-#define NETWORK_HAS_POWER_CONSTRAINT (1<<5)
-#define NETWORK_HAS_CSA (1<<6)
-#define NETWORK_HAS_QUIET (1<<7)
-#define NETWORK_HAS_IBSS_DFS (1<<8)
-#define NETWORK_HAS_TPC_REPORT (1<<9)
+#define NETWORK_HAS_QOS_PARAMETERS (1 << 3)
+#define NETWORK_HAS_QOS_INFORMATION (1 << 4)
+#define NETWORK_HAS_QOS_MASK (NETWORK_HAS_QOS_PARAMETERS | \
+ NETWORK_HAS_QOS_INFORMATION)

-#define NETWORK_HAS_ERP_VALUE (1<<10)
+#define NETWORK_HAS_ERP_VALUE (1 << 10)

#define QOS_QUEUE_NUM 4
#define QOS_OUI_LEN 3
@@ -1021,7 +970,7 @@ typedef union _frameqos {
#define QOS_OUI_PARAM_SUB_TYPE 1
#define QOS_VERSION_1 1
#define QOS_AIFSN_MIN_VALUE 2
-#if 1
+
struct ieee80211_qos_information_element {
u8 elementID;
u8 length;
@@ -1065,7 +1014,6 @@ struct ieee80211_tim_parameters {
u8 tim_period;
} __attribute__ ((packed));

-//#else
struct ieee80211_wmm_ac_param {
u8 ac_aci_acm_aifsn;
u8 ac_ecwmin_ecwmax;
@@ -1096,7 +1044,7 @@ struct ieee80211_wmm_tspec_elem {
u16 surp_band_allow;
u16 medium_time;
}__attribute__((packed));
-#endif
+
enum eap_type {
EAP_PACKET = 0,
EAPOL_START,
@@ -1117,17 +1065,16 @@ static inline const char *eap_get_type(i
{
return ((u32)type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type];
}
-//added by amy for reorder
-static inline u8 Frame_QoSTID(u8* buf)
+
+static inline u8 Frame_QoSTID(u8 *buf)
{
- struct ieee80211_hdr_3addr *hdr;
- u16 fc;
- hdr = (struct ieee80211_hdr_3addr *)buf;
- fc = le16_to_cpu(hdr->frame_ctl);
- return (u8)((frameqos*)(buf + (((fc & IEEE80211_FCTL_TODS)&&(fc & IEEE80211_FCTL_FROMDS))? 30 : 24)))->field.tid;
-}
+ struct ieee80211_hdr_3addr *hdr = (struct ieee80211_hdr_3addr *)buf;
+ u16 fc = le16_to_cpu(hdr->frame_ctl);

-//added by amy for reorder
+ return (u8)((frameqos *)(buf +
+ (((fc & IEEE80211_FCTL_TODS) &&
+ (fc & IEEE80211_FCTL_FROMDS)) ? 30 : 24)))->field.tid;
+}

struct eapol {
u8 snap[6];
@@ -1137,7 +1084,7 @@ struct eapol {
u16 length;
} __attribute__ ((packed));

-struct ieee80211_softmac_stats{
+struct ieee80211_softmac_stats {
unsigned int rx_ass_ok;
unsigned int rx_ass_err;
unsigned int rx_probe_rq;
@@ -1185,7 +1132,7 @@ struct ieee80211_info_element_hdr {
*/

#define IEEE80211_DEFAULT_TX_ESSID "Penguin"
-#define IEEE80211_DEFAULT_BASIC_RATE 2 //1Mbps
+#define IEEE80211_DEFAULT_BASIC_RATE 2 /* 1Mbps */

enum {WMM_all_frame, WMM_two_frame, WMM_four_frame, WMM_six_frame};
#define MAX_SP_Len (WMM_all_frame << 4)
@@ -1215,18 +1162,15 @@ enum {WMM_all_frame, WMM_two_frame, WMM_
#define WME_AIFSN_MASK 0x03
#define WME_AC_PRAM_LEN 16

-#define MAX_RECEIVE_BUFFER_SIZE 9100
-
//UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
//#define UP2AC(up) ((up<3) ? ((up==0)?1:0) : (up>>1))
-#if 1
#define UP2AC(up) ( \
((up) < 1) ? WME_AC_BE : \
((up) < 3) ? WME_AC_BK : \
((up) < 4) ? WME_AC_BE : \
((up) < 6) ? WME_AC_VI : \
WME_AC_VO)
-#endif
+
//AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
#define AC2UP(_ac) ( \
((_ac) == WME_AC_VO) ? 6 : \
@@ -1235,7 +1179,9 @@ enum {WMM_all_frame, WMM_two_frame, WMM_
0)

#define ETHER_ADDR_LEN 6 /* length of an Ethernet address */
-#define ETHERNET_HEADER_SIZE 14 /* length of two Ethernet address plus ether type*/
+
+/* length of two Ethernet address plus ether type */
+#define ETHERNET_HEADER_SIZE 14

struct ether_header {
u8 ether_dhost[ETHER_ADDR_LEN];
@@ -1250,30 +1196,11 @@ struct ether_header {
#define ETHERTYPE_IP 0x0800 /* IP protocol */
#endif

-typedef struct _bss_ht{
-
- bool support_ht;
-
- // HT related elements
- u8 ht_cap_buf[32];
- u16 ht_cap_len;
- u8 ht_info_buf[32];
- u16 ht_info_len;
-
- HT_SPEC_VER ht_spec_ver;
- //HT_CAPABILITY_ELE bdHTCapEle;
- //HT_INFORMATION_ELE bdHTInfoEle;
-
- bool aggregation;
- bool long_slot_time;
-}bss_ht, *pbss_ht;
-
-typedef enum _erp_t{
- ERP_NonERPpresent = 0x01,
- ERP_UseProtection = 0x02,
- ERP_BarkerPreambleMode = 0x04,
-} erp_t;
-
+enum {
+ ERP_NonERPpresent = 1,
+ ERP_UseProtection = 2,
+ ERP_BarkerPreambleMode = 4,
+};

struct ieee80211_network {
/* These entries are used to identify a unique network */
@@ -1282,25 +1209,24 @@ struct ieee80211_network {
/* Ensure null-terminated for any debug msgs */
u8 ssid[IW_ESSID_MAX_SIZE + 1];
u8 ssid_len;
-#if 1
+
struct ieee80211_qos_data qos_data;
-#else
- // Qos related. Added by Annie, 2005-11-01.
- BSS_QOS BssQos;
-#endif

- //added by amy for LEAP
+ /* for LEAP */
bool bWithAironetIE;
bool bCkipSupported;
bool bCcxRmEnable;
u16 CcxRmState[2];
- // CCXv4 S59, MBSSID.
+
+ /* CCXv4 S59, MBSSID. */
bool bMBssidValid;
u8 MBssidMask;
u8 MBssid[6];
- // CCX 2 S38, WLAN Device Version Number element. Annie, 2006-08-20.
+
+ /* CCX 2 S38, WLAN Device Version Number element. */
bool bWithCcxVerNum;
u8 BssCcxVerNumber;
+
/* These are network statistics */
struct ieee80211_rx_stats stats;
u16 capability;
@@ -1334,9 +1260,10 @@ struct ieee80211_network {
u8 Turbo_Enable;//enable turbo mode, added by thomas
u16 CountryIeLen;
u8 CountryIeBuf[MAX_IE_LEN];
- // HT Related, by amy, 2008.04.29
+
+ /* HT Related */
BSS_HT bssht;
- // Add to handle broadcom AP management frame CCK rate.
+ /* Added to handle broadcom AP management frame CCK rate. */
bool broadcom_cap_exist;
bool realtek_cap_exit;
bool marvell_cap_exist;
@@ -1344,14 +1271,12 @@ struct ieee80211_network {
bool atheros_cap_exist;
bool cisco_cap_exist;
bool unknown_cap_exist;
-// u8 berp_info;
- bool berp_info_valid;
+ bool berp_info_valid;
bool buseprotection;
- //put at the end of the structure.
- struct list_head list;
+
+ struct list_head list; /* put at the end of the structure */
};

-#if 1
enum ieee80211_state {

/* the card is not linked at all */
@@ -1390,24 +1315,12 @@ enum ieee80211_state {
IEEE80211_LINKED_SCANNING,

};
-#else
-enum ieee80211_state {
- IEEE80211_UNINITIALIZED = 0,
- IEEE80211_INITIALIZED,
- IEEE80211_ASSOCIATING,
- IEEE80211_ASSOCIATED,
- IEEE80211_AUTHENTICATING,
- IEEE80211_AUTHENTICATED,
- IEEE80211_SHUTDOWN
-};
-#endif

#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
#define DEFAULT_FTS 2346

#define CFG_IEEE80211_RESERVE_FCS (1<<0)
#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
-#define CFG_IEEE80211_RTS (1<<2)

#define IEEE80211_24GHZ_MIN_CHANNEL 1
#define IEEE80211_24GHZ_MAX_CHANNEL 14
@@ -1424,16 +1337,12 @@ typedef struct tx_pending_t{
struct ieee80211_txb *txb;
}tx_pending_t;

-typedef struct _bandwidth_autoswitch
-{
+struct bandwidth_autoswitch {
long threshold_20Mhzto40Mhz;
- long threshold_40Mhzto20Mhz;
+ long threshold_40Mhzto20Mhz;
bool bforced_tx20Mhz;
bool bautoswitch_enable;
-}bandwidth_autoswitch,*pbandwidth_autoswitch;
-
-
-//added by amy for order
+};

#define REORDER_WIN_SIZE 128
#define REORDER_ENTRY_NUM 128
@@ -1443,123 +1352,115 @@ typedef struct _RX_REORDER_ENTRY
u16 SeqNum;
struct ieee80211_rxb* prxb;
} RX_REORDER_ENTRY, *PRX_REORDER_ENTRY;
-//added by amy for order
+
typedef enum _Fsync_State{
Default_Fsync,
HW_Fsync,
SW_Fsync
-}Fsync_State;
+} Fsync_State;

-// Power save mode configured.
-typedef enum _RT_PS_MODE
-{
- eActive, // Active/Continuous access.
- eMaxPs, // Max power save mode.
- eFastPs // Fast power save mode.
-}RT_PS_MODE;
+/* Power save mode configured. */
+typedef enum _RT_PS_MODE {
+ eActive, /* Active/Continuous access. */
+ eMaxPs, /* Max power save mode. */
+ eFastPs /* Fast power save mode. */
+} RT_PS_MODE;

-typedef enum _IPS_CALLBACK_FUNCION
-{
+typedef enum _IPS_CALLBACK_FUNCION {
IPS_CALLBACK_NONE = 0,
IPS_CALLBACK_MGNT_LINK_REQUEST = 1,
IPS_CALLBACK_JOIN_REQUEST = 2,
-}IPS_CALLBACK_FUNCION;
+} IPS_CALLBACK_FUNCION;

-typedef enum _RT_JOIN_ACTION{
- RT_JOIN_INFRA = 1,
+typedef enum _RT_JOIN_ACTION {
+ RT_JOIN_INFRA = 1,
RT_JOIN_IBSS = 2,
RT_START_IBSS = 3,
RT_NO_ACTION = 4,
-}RT_JOIN_ACTION;
+} RT_JOIN_ACTION;
+
+struct ibss_parms {
+ u16 atimWin;
+};

-typedef struct _IbssParms{
- u16 atimWin;
-}IbssParms, *PIbssParms;
-#define MAX_NUM_RATES 264 // Max num of support rates element: 8, Max num of ext. support rate: 255. 061122, by rcnjko.
+/* Max num of support rates element: 8, Max num of ext. support rate: 255. */
+#define MAX_NUM_RATES 264

-// RF state.
-typedef enum _RT_RF_POWER_STATE
-{
+typedef enum _RT_RF_POWER_STATE {
eRfOn,
eRfSleep,
eRfOff
-}RT_RF_POWER_STATE;
-
-typedef struct _RT_POWER_SAVE_CONTROL
-{
+} RT_RF_POWER_STATE;

- //
- // Inactive Power Save(IPS) : Disable RF when disconnected
- //
- bool bInactivePs;
- bool bIPSModeBackup;
- bool bHaltAdapterClkRQ;
- bool bSwRfProcessing;
+struct rt_power_save_control {
+ /* Inactive Power Save (IPS): disable RF when disconnected */
+ bool bInactivePs;
+ bool bIPSModeBackup;
+ bool bHaltAdapterClkRQ;
+ bool bSwRfProcessing;
RT_RF_POWER_STATE eInactivePowerState;
struct work_struct InactivePsWorkItem;
struct timer_list InactivePsTimer;

- // Return point for join action
+ /* return point for join action */
IPS_CALLBACK_FUNCION ReturnPoint;

- // Recored Parameters for rescheduled JoinRequest
- bool bTmpBssDesc;
+ /* Recored Parameters for rescheduled JoinRequest */
+ bool bTmpBssDesc;
RT_JOIN_ACTION tmpJoinAction;
struct ieee80211_network tmpBssDesc;

- // Recored Parameters for rescheduled MgntLinkRequest
- bool bTmpScanOnly;
- bool bTmpActiveScan;
- bool bTmpFilterHiddenAP;
- bool bTmpUpdateParms;
- u8 tmpSsidBuf[33];
- OCTET_STRING tmpSsid2Scan;
- bool bTmpSsid2Scan;
- u8 tmpNetworkType;
- u8 tmpChannelNumber;
- u16 tmpBcnPeriod;
- u8 tmpDtimPeriod;
- u16 tmpmCap;
- OCTET_STRING tmpSuppRateSet;
- u8 tmpSuppRateBuf[MAX_NUM_RATES];
- bool bTmpSuppRate;
- IbssParms tmpIbpm;
- bool bTmpIbpm;
-
- //
- // Leisre Poswer Save : Disable RF if connected but traffic is not busy
- //
- bool bLeisurePs;
- u32 PowerProfile;
- u8 LpsIdleCount;
- u8 RegMaxLPSAwakeIntvl;
- u8 LPSAwakeIntvl;
-
- //RF OFF Level
- u32 CurPsLevel;
- u32 RegRfPsLevel;
-
- //Fw Control LPS
- bool bFwCtrlLPS;
- u8 FWCtrlPSMode;
-
- //2009.01.01 added by tynli
- // Record if there is a link request in IPS RF off progress.
- bool LinkReqInIPSRFOffPgs;
- // To make sure that connect info should be executed, so we set the bit to filter the link info which comes after the connect info.
- bool BufConnectinfoBefore;
-
-}RT_POWER_SAVE_CONTROL,*PRT_POWER_SAVE_CONTROL;
-
-typedef u32 RT_RF_CHANGE_SOURCE;
-#define RF_CHANGE_BY_SW BIT31
-#define RF_CHANGE_BY_HW BIT30
-#define RF_CHANGE_BY_PS BIT29
-#define RF_CHANGE_BY_IPS BIT28
-#define RF_CHANGE_BY_INIT 0 // Do not change the RFOff reason. Defined by Bruce, 2008-01-17.
+ /* Recored Parameters for rescheduled MgntLinkRequest */
+ bool bTmpScanOnly;
+ bool bTmpActiveScan;
+ bool bTmpFilterHiddenAP;
+ bool bTmpUpdateParms;
+ u8 tmpSsidBuf[33];
+ OCTET_STRING tmpSsid2Scan;
+ bool bTmpSsid2Scan;
+ u8 tmpNetworkType;
+ u8 tmpChannelNumber;
+ u16 tmpBcnPeriod;
+ u8 tmpDtimPeriod;
+ u16 tmpmCap;
+ OCTET_STRING tmpSuppRateSet;
+ u8 tmpSuppRateBuf[MAX_NUM_RATES];
+ bool bTmpSuppRate;
+ struct ibss_parms tmpIbpm;
+ bool bTmpIbpm;
+
+ /* Leisre Poswer Save: disable RF if connected but traffic isn't busy */
+ bool bLeisurePs;
+ u32 PowerProfile;
+ u8 LpsIdleCount;
+ u8 RegMaxLPSAwakeIntvl;
+ u8 LPSAwakeIntvl;
+
+ /* RF OFF Level */
+ u32 CurPsLevel;
+ u32 RegRfPsLevel;
+
+ /* Fw Control LPS */
+ bool bFwCtrlLPS;
+ u8 FWCtrlPSMode;

-typedef enum
-{
+ /* Record if there is a link request in IPS RF off progress. */
+ bool LinkReqInIPSRFOffPgs;
+ /*
+ * To make sure that connect info should be executed, so we set the
+ * bit to filter the link info which comes after the connect info.
+ */
+ bool BufConnectinfoBefore;
+};
+
+enum {
+ RF_CHANGE_BY_SW = BIT31,
+ RF_CHANGE_BY_HW = BIT30,
+ RF_CHANGE_BY_PS = BIT29,
+ RF_CHANGE_BY_IPS = BIT28,
+};
+
+enum {
COUNTRY_CODE_FCC = 0,
COUNTRY_CODE_IC = 1,
COUNTRY_CODE_ETSI = 2,
@@ -1571,107 +1472,106 @@ typedef enum
COUNTRY_CODE_TELEC,
COUNTRY_CODE_MIC,
COUNTRY_CODE_GLOBAL_DOMAIN
-}country_code_type_t;
- // Firmware realted CMD IO.
-typedef enum _FW_CMD_IO_TYPE{
- FW_CMD_DIG_ENABLE = 0, // For DIG DM
+};
+
+/* Firmware related CMD IO. */
+typedef enum _FW_CMD_IO_TYPE {
+ FW_CMD_DIG_ENABLE = 0, /* for DIG DM */
FW_CMD_DIG_DISABLE = 1,
FW_CMD_DIG_HALT = 2,
FW_CMD_DIG_RESUME = 3,
- FW_CMD_HIGH_PWR_ENABLE = 4, // For High Power DM
+ FW_CMD_HIGH_PWR_ENABLE = 4, /* for High Power DM */
FW_CMD_HIGH_PWR_DISABLE = 5,
- FW_CMD_RA_RESET = 6, // For Rate adaptive DM
- FW_CMD_RA_ACTIVE= 7,
- FW_CMD_RA_REFRESH_N= 8,
- FW_CMD_RA_REFRESH_BG= 9,
- FW_CMD_IQK_ENABLE = 10, // For FW supported IQK
- FW_CMD_TXPWR_TRACK_ENABLE = 11, // Tx power tracking switch
- FW_CMD_TXPWR_TRACK_DISABLE = 12, // Tx power tracking switch
+ FW_CMD_RA_RESET = 6, /* for Rate adaptive DM */
+ FW_CMD_RA_ACTIVE = 7,
+ FW_CMD_RA_REFRESH_N = 8,
+ FW_CMD_RA_REFRESH_BG = 9,
+ FW_CMD_IQK_ENABLE = 10, /* for FW supported IQK */
+ FW_CMD_TXPWR_TRACK_ENABLE = 11, /* Tx power tracking switch */
+ FW_CMD_TXPWR_TRACK_DISABLE = 12,/* Tx power tracking switch */
FW_CMD_PAUSE_DM_BY_SCAN = 13,
FW_CMD_RESUME_DM_BY_SCAN = 14,
FW_CMD_MID_HIGH_PWR_ENABLE = 15,
- FW_CMD_LPS_ENTER = 16, // Indifate firmware that driver enters LPS, For PS-Poll hardware bug
- FW_CMD_LPS_LEAVE = 17, // Indicate firmware that driver leave LPS, 2009/1/4, by Emily
-}FW_CMD_IO_TYPE,*PFW_CMD_IO_TYPE;
-#define RT_MAX_LD_SLOT_NUM 10
-typedef struct _RT_LINK_DETECT_T{
-
- u32 NumRecvBcnInPeriod;
- u32 NumRecvDataInPeriod;
-
- u32 RxBcnNum[RT_MAX_LD_SLOT_NUM]; // number of Rx beacon / CheckForHang_period to determine link status
- u32 RxDataNum[RT_MAX_LD_SLOT_NUM]; // number of Rx data / CheckForHang_period to determine link status
- u16 SlotNum; // number of CheckForHang period to determine link status
- u16 SlotIndex;
-
- u32 NumTxOkInPeriod;
- u32 NumRxOkInPeriod;
- bool bBusyTraffic;
-}RT_LINK_DETECT_T, *PRT_LINK_DETECT_T;
+ /* indicate firmware that driver enters LPS, for PS-Poll hardware bug */
+ FW_CMD_LPS_ENTER = 16,
+ /* indicate firmware that driver leave LPS */
+ FW_CMD_LPS_LEAVE = 17,
+} FW_CMD_IO_TYPE;

+#define RT_MAX_LD_SLOT_NUM 10
+struct rt_link_detect {
+ u32 NumRecvBcnInPeriod;
+ u32 NumRecvDataInPeriod;
+
+ /* number of Rx beacon / CheckForHang_period to determine link status */
+ u32 RxBcnNum[RT_MAX_LD_SLOT_NUM];
+ /* number of Rx data / CheckForHang_period to determine link status */
+ u32 RxDataNum[RT_MAX_LD_SLOT_NUM];
+ /* number of CheckForHang period to determine link status */
+ u16 SlotNum;
+ u16 SlotIndex;
+
+ u32 NumTxOkInPeriod;
+ u32 NumRxOkInPeriod;
+ bool bBusyTraffic;
+};

struct ieee80211_device {
struct net_device *dev;
struct ieee80211_security sec;

- //hw security related
-// u8 hwsec_support; //support?
- u8 hwsec_active; //hw security active.
+ /* hw security related */
+ u8 hwsec_active;
bool is_silent_reset;
bool is_roaming;
bool ieee_up;
- //added by amy
bool bSupportRemoteWakeUp;
- RT_PS_MODE dot11PowerSaveMode; // Power save mode configured.
+ RT_PS_MODE dot11PowerSaveMode;
bool actscanning;
- //added by amy 090313
bool be_scan_inprogress;
bool beinretry;
- RT_RF_POWER_STATE eRFPowerState;
- RT_RF_CHANGE_SOURCE RfOffReason;
+ RT_RF_POWER_STATE eRFPowerState;
+ u32 RfOffReason;
bool is_set_key;
- //11n spec related I wonder if These info structure need to be moved out of ieee80211_device

- //11n HT below
- PRT_HIGH_THROUGHPUT pHTInfo;
- //struct timer_list SwBwTimer;
-// spinlock_t chnlop_spinlock;
+ /* 11n HT below */
+ PRT_HIGH_THROUGHPUT pHTInfo;
spinlock_t bw_spinlock;

spinlock_t reorder_spinlock;
- // for HT operation rate set. we use this one for HT data rate to seperate different descriptors
- //the way fill this is the same as in the IE
- u8 Regdot11HTOperationalRateSet[16]; //use RATR format
- u8 dot11HTOperationalRateSet[16]; //use RATR format
+ /*
+ * for HT operation rate set, we use this one for HT data rate to
+ * seperate different descriptors the way fill this is the same as
+ * in the IE
+ */
+ u8 Regdot11HTOperationalRateSet[16]; /* use RATR format */
+ u8 dot11HTOperationalRateSet[16]; /* use RATR format */
u8 RegHTSuppRateSet[16];
- u8 HTCurrentOperaRate;
- u8 HTHighestOperaRate;
- //wb added for rate operation mode to firmware
+ u8 HTCurrentOperaRate;
+ u8 HTHighestOperaRate;
+ /* for rate operation mode to firmware */
u8 bTxDisableRateFallBack;
u8 bTxUseDriverAssingedRate;
atomic_t atm_chnlop;
atomic_t atm_swbw;
-// u8 HTHighestOperaRate;
-// u8 HTCurrentOperaRate;

- // 802.11e and WMM Traffic Stream Info (TX)
- struct list_head Tx_TS_Admit_List;
- struct list_head Tx_TS_Pending_List;
- struct list_head Tx_TS_Unused_List;
+ /* 802.11e and WMM Traffic Stream Info (TX) */
+ struct list_head Tx_TS_Admit_List;
+ struct list_head Tx_TS_Pending_List;
+ struct list_head Tx_TS_Unused_List;
TX_TS_RECORD TxTsRecord[TOTAL_TS_NUM];
- // 802.11e and WMM Traffic Stream Info (RX)
- struct list_head Rx_TS_Admit_List;
- struct list_head Rx_TS_Pending_List;
- struct list_head Rx_TS_Unused_List;
+ /* 802.11e and WMM Traffic Stream Info (RX) */
+ struct list_head Rx_TS_Admit_List;
+ struct list_head Rx_TS_Pending_List;
+ struct list_head Rx_TS_Unused_List;
RX_TS_RECORD RxTsRecord[TOTAL_TS_NUM];
-//#ifdef TO_DO_LIST
+
RX_REORDER_ENTRY RxReorderEntry[128];
- struct list_head RxReorder_Unused_List;
-//#endif
- // Qos related. Added by Annie, 2005-11-01.
-// PSTA_QOS pStaQos;
- u8 ForcedPriority; // Force per-packet priority 1~7. (default: 0, not to force it.)
+ struct list_head RxReorder_Unused_List;

+ /* Qos related */
+ /* Force per-packet priority 1~7. (default: 0, not to force it.) */
+ u8 ForcedPriority;

/* Bookkeeping structures */
struct net_device_stats stats;
@@ -1778,9 +1678,11 @@ struct ieee80211_device {

u16 prev_seq_ctl; /* used to drop duplicate frames */

- /* map of allowed channels. 0 is dummy */
- // FIXME: remeber to default to a basic channel plan depending of the PHY type
- void* pDot11dInfo;
+ /*
+ * map of allowed channels. 0 is dummy, FIXME: remeber to default to
+ * a basic channel plan depending of the PHY type
+ */
+ void *pDot11dInfo;
bool bGlobalDomain;
int rate; /* current rate */
int basic_rate;
@@ -1849,46 +1751,46 @@ struct ieee80211_device {
struct sk_buff *mgmt_queue_ring[MGMT_QUEUE_NUM];
int mgmt_queue_head;
int mgmt_queue_tail;
-//{ added for rtl819x
-#define IEEE80211_QUEUE_LIMIT 128
+
+/* rtl819x start */
u8 AsocRetryCount;
unsigned int hw_header;
struct sk_buff_head skb_waitQ[MAX_QUEUE_SIZE];
- struct sk_buff_head skb_aggQ[MAX_QUEUE_SIZE];
- struct sk_buff_head skb_drv_aggQ[MAX_QUEUE_SIZE];
- u32 sta_edca_param[4];
+ struct sk_buff_head skb_aggQ[MAX_QUEUE_SIZE];
+ struct sk_buff_head skb_drv_aggQ[MAX_QUEUE_SIZE];
+ u32 sta_edca_param[4];
bool aggregation;
- // Enable/Disable Rx immediate BA capability.
+ /* Enable/Disable Rx immediate BA capability. */
bool enable_rx_imm_BA;
bool bibsscoordinator;

- //+by amy for DM ,080515
- //Dynamic Tx power for near/far range enable/Disable , by amy , 2008-05-15
- bool bdynamic_txpower_enable;
+ /* Dynamic Tx power for near/far range enable/disable. */
+ bool bdynamic_txpower_enable;

bool bCTSToSelfEnable;
- u8 CTSToSelfTH;
+ u8 CTSToSelfTH;

- u32 fsync_time_interval;
+ u32 fsync_time_interval;
u32 fsync_rate_bitmap;
u8 fsync_rssi_threshold;
bool bfsync_enable;

- u8 fsync_multiple_timeinterval; // FsyncMultipleTimeInterval * FsyncTimeInterval
- u32 fsync_firstdiff_ratethreshold; // low threshold
- u32 fsync_seconddiff_ratethreshold; // decrease threshold
- Fsync_State fsync_state;
+ u8 fsync_multiple_timeinterval; /* value * FsyncTimeInterval */
+ u32 fsync_firstdiff_ratethreshold; /* low threshold */
+ u32 fsync_seconddiff_ratethreshold; /* decrease threshold */
+ Fsync_State fsync_state;
bool bis_any_nonbepkts;
- //20Mhz 40Mhz AutoSwitch Threshold
- bandwidth_autoswitch bandwidth_auto_switch;
- //for txpower tracking
+ /* 20Mhz 40Mhz AutoSwitch Threshold */
+ struct bandwidth_autoswitch bandwidth_auto_switch;
+ /* for txpower tracking */
bool FwRWRF;

- //added by amy for AP roaming
- RT_LINK_DETECT_T LinkDetectInfo;
- //added by amy for ps
- RT_POWER_SAVE_CONTROL PowerSaveControl;
-//}
+ /* for AP roaming */
+ struct rt_link_detect LinkDetectInfo;
+
+ struct rt_power_save_control PowerSaveControl;
+/* rtl819x end */
+
/* used if IEEE_SOFTMAC_TX_QUEUE is set */
struct tx_pending_t tx_pending;

@@ -1901,20 +1803,13 @@ struct ieee80211_device {
struct work_struct associate_procedure_wq;
struct delayed_work softmac_scan_wq;
struct delayed_work associate_retry_wq;
- struct delayed_work start_ibss_wq;
- struct delayed_work hw_wakeup_wq;
+ struct delayed_work start_ibss_wq;
+ struct delayed_work hw_wakeup_wq;
struct delayed_work hw_sleep_wq;
struct delayed_work link_change_wq;
struct work_struct wx_sync_scan_wq;
struct workqueue_struct *wq;

- // Qos related. Added by Annie, 2005-11-01.
- //STA_QOS StaQos;
-
- //u32 STA_EDCA_PARAM[4];
- //CHANNEL_ACCESS_SETTING ChannelAccessSetting;
-
-
/* Callback functions */
void (*set_security)(struct net_device *dev,
struct ieee80211_security *sec);
@@ -1927,11 +1822,11 @@ struct ieee80211_device {
struct net_device *dev);

int (*reset_port)(struct net_device *dev);
- int (*is_queue_full) (struct net_device * dev, int pri);
+ int (*is_queue_full)(struct net_device *dev, int pri);

- int (*handle_management) (struct net_device * dev,
- struct ieee80211_network * network, u16 type);
- int (*is_qos_active) (struct net_device *dev, struct sk_buff *skb);
+ int (*handle_management)(struct net_device *dev,
+ struct ieee80211_network *network, u16 type);
+ int (*is_qos_active)(struct net_device *dev, struct sk_buff *skb);

/* Softmac-generated frames (mamagement) are TXed via this
* callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is
@@ -2004,26 +1899,30 @@ struct ieee80211_device {

/* power save mode related */
void (*sta_wake_up) (struct net_device *dev);
-// void (*ps_request_tx_ack) (struct net_device *dev);
void (*enter_sleep_state) (struct net_device *dev, u32 th, u32 tl);
short (*ps_is_queue_empty) (struct net_device *dev);

- int (*handle_beacon) (struct net_device * dev, struct ieee80211_beacon * beacon, struct ieee80211_network * network);
- int (*handle_assoc_response) (struct net_device * dev, struct ieee80211_assoc_response_frame * resp, struct ieee80211_network * network);
+ int (*handle_beacon)(struct net_device *dev,
+ struct ieee80211_probe_response *beacon,
+ struct ieee80211_network *network);
+ int (*handle_assoc_response)(struct net_device *dev,
+ struct ieee80211_assoc_response_frame *resp,
+ struct ieee80211_network *network);

/* check whether Tx hw resouce available */
short (*check_nic_enough_desc)(struct net_device *dev, int queue_index);
- //added by wb for HT related
-// void (*SwChnlByTimerHandler)(struct net_device *dev, int channel);
- void (*SetBWModeHandler)(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
-// void (*UpdateHalRATRTableHandler)(struct net_device* dev, u8* pMcsRate);
+ /* HT related */
+ void (*SetBWModeHandler)(struct net_device *dev,
+ HT_CHANNEL_WIDTH Bandwidth,
+ HT_EXTCHNL_OFFSET Offset);
bool (*GetNmodeSupportBySecCfg)(struct net_device* dev);
void (*SetWirelessMode)(struct net_device* dev, u8 wireless_mode);
bool (*GetHalfNmodeSupportByAPsHandler)(struct net_device* dev);
bool (*is_ap_in_wep_tkip)(struct net_device* dev);
void (*InitialGainHandler)(struct net_device *dev, u8 Operation);
- bool (*SetFwCmdHandler)(struct net_device *dev, FW_CMD_IO_TYPE FwCmdIO);
- void (*LedControlHandler)(struct net_device * dev, LED_CTL_MODE LedAction);
+ bool (*SetFwCmdHandler)(struct net_device *dev, FW_CMD_IO_TYPE FwCmdIO);
+ void (*LedControlHandler)(struct net_device *dev,
+ LED_CTL_MODE LedAction);
/* This must be the last item so that it points to the data
* allocated beyond this structure by alloc_ieee80211 */
u8 priv[0];
@@ -2316,7 +2215,6 @@ extern int ieee80211_wx_set_freq(struct
extern int ieee80211_wx_get_freq(struct ieee80211_device *ieee, struct iw_request_info *a,
union iwreq_data *wrqu, char *b);

-//extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee);
extern void ieee80211_wx_sync_scan_wq(struct work_struct *work);

extern int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee,
@@ -2342,55 +2240,63 @@ extern int ieee80211_wx_set_rts(struct i
extern int ieee80211_wx_get_rts(struct ieee80211_device *ieee,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra);
-//HT
-#define MAX_RECEIVE_BUFFER_SIZE 9100 //
-extern void HTDebugHTCapability(u8* CapIE, u8* TitleString );
-extern void HTDebugHTInfo(u8* InfoIE, u8* TitleString);
-
-void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
-extern void HTUpdateDefaultSetting(struct ieee80211_device* ieee);
-extern void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u8* len, u8 isEncrypt);
-extern void HTConstructInfoElement(struct ieee80211_device* ieee, u8* posHTInfo, u8* len, u8 isEncrypt);
-extern void HTConstructRT2RTAggElement(struct ieee80211_device* ieee, u8* posRT2RTAgg, u8* len);
+
+/* HT */
+#define MAX_RECEIVE_BUFFER_SIZE 9100
+extern void HTDebugHTCapability(u8 *CapIE, u8 *TitleString);
+extern void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString);
+
+extern void HTSetConnectBwMode(struct ieee80211_device *ieee,
+ HT_CHANNEL_WIDTH Bandwidth,
+ HT_EXTCHNL_OFFSET Offset);
+extern void HTUpdateDefaultSetting(struct ieee80211_device *ieee);
+extern void HTConstructCapabilityElement(struct ieee80211_device *ieee,
+ u8 *posHTCap, u8 *len, u8 isEncrypt);
+extern void HTConstructInfoElement(struct ieee80211_device *ieee,
+ u8 *posHTInfo, u8 *len, u8 isEncrypt);
+extern void HTConstructRT2RTAggElement(struct ieee80211_device *ieee,
+ u8 *posRT2RTAgg, u8 *len);
extern void HTOnAssocRsp(struct ieee80211_device *ieee);
-extern void HTInitializeHTInfo(struct ieee80211_device* ieee);
+extern void HTInitializeHTInfo(struct ieee80211_device *ieee);
extern void HTInitializeBssDesc(PBSS_HT pBssHT);
-extern void HTResetSelfAndSavePeerSetting(struct ieee80211_device* ieee, struct ieee80211_network * pNetwork);
-extern void HTUpdateSelfAndPeerSetting(struct ieee80211_device* ieee, struct ieee80211_network * pNetwork);
-extern u8 HTGetHighestMCSRate(struct ieee80211_device* ieee, u8* pMCSRateSet, u8* pMCSFilter);
+extern void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee,
+ struct ieee80211_network *pNetwork);
+extern void HTUpdateSelfAndPeerSetting(struct ieee80211_device *ieee,
+ struct ieee80211_network *pNetwork);
+extern u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet,
+ u8 *pMCSFilter);
extern u8 MCS_FILTER_ALL[];
extern u16 MCS_DATA_RATE[2][2][77] ;
-extern u8 HTCCheck(struct ieee80211_device* ieee, u8* pFrame);
-//extern void HTSetConnectBwModeCallback(unsigned long data);
-extern void HTResetIOTSetting(PRT_HIGH_THROUGHPUT pHTInfo);
-extern bool IsHTHalfNmodeAPs(struct ieee80211_device* ieee);
-extern u16 HTHalfMcsToDataRate(struct ieee80211_device* ieee, u8 nMcsRate);
-extern u16 HTMcsToDataRate( struct ieee80211_device* ieee, u8 nMcsRate);
-extern u16 TxCountToDataRate( struct ieee80211_device* ieee, u8 nDataRate);
-//function in BAPROC.c
-extern int ieee80211_rx_ADDBAReq( struct ieee80211_device* ieee, struct sk_buff *skb);
-extern int ieee80211_rx_ADDBARsp( struct ieee80211_device* ieee, struct sk_buff *skb);
-extern int ieee80211_rx_DELBA(struct ieee80211_device* ieee,struct sk_buff *skb);
-extern void TsInitAddBA( struct ieee80211_device* ieee, PTX_TS_RECORD pTS, u8 Policy, u8 bOverwritePending);
-extern void TsInitDelBA( struct ieee80211_device* ieee, PTS_COMMON_INFO pTsCommonInfo, TR_SELECT TxRxSelect);
+extern u8 HTCCheck(struct ieee80211_device *ieee, u8 *pFrame);
+extern void HTResetIOTSetting(PRT_HIGH_THROUGHPUT pHTInfo);
+extern bool IsHTHalfNmodeAPs(struct ieee80211_device *ieee);
+extern u16 HTHalfMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate);
+extern u16 HTMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate);
+extern u16 TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate);
+extern int ieee80211_rx_ADDBAReq(struct ieee80211_device *ieee,
+ struct sk_buff *skb);
+extern int ieee80211_rx_ADDBARsp(struct ieee80211_device *ieee,
+ struct sk_buff *skb);
+extern int ieee80211_rx_DELBA(struct ieee80211_device *ieee,
+ struct sk_buff *skb);
+extern void TsInitAddBA(struct ieee80211_device *ieee, PTX_TS_RECORD pTS,
+ u8 Policy, u8 bOverwritePending);
+extern void TsInitDelBA(struct ieee80211_device *ieee,
+ PTS_COMMON_INFO pTsCommonInfo, TR_SELECT TxRxSelect);
extern void BaSetupTimeOut(unsigned long data);
extern void TxBaInactTimeout(unsigned long data);
extern void RxBaInactTimeout(unsigned long data);
extern void ResetBaEntry( PBA_RECORD pBA);
-//function in TS.c
-extern bool GetTs(
- struct ieee80211_device* ieee,
- PTS_COMMON_INFO *ppTS,
- u8* Addr,
- u8 TID,
- TR_SELECT TxRxSelect, //Rx:1, Tx:0
- bool bAddNewTs
- );
+extern bool GetTs(struct ieee80211_device *ieee, PTS_COMMON_INFO *ppTS,
+ u8 *Addr, u8 TID, TR_SELECT TxRxSelect, /* Rx:1, Tx:0 */
+ bool bAddNewTs);
extern void TSInitialize(struct ieee80211_device *ieee);
-extern void TsStartAddBaProcess(struct ieee80211_device* ieee, PTX_TS_RECORD pTxTS);
-extern void RemovePeerTS(struct ieee80211_device* ieee, u8* Addr);
-extern void RemoveAllTS(struct ieee80211_device* ieee);
-void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee);
+extern void TsStartAddBaProcess(struct ieee80211_device *ieee,
+ PTX_TS_RECORD pTxTS);
+extern void RemovePeerTS(struct ieee80211_device *ieee, u8 *Addr);
+extern void RemoveAllTS(struct ieee80211_device *ieee);
+
+extern void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee);

extern const long ieee80211_wlan_frequencies[];

@@ -2439,6 +2345,8 @@ extern int ieee80211_parse_info_param(st
struct ieee80211_network *network,
struct ieee80211_rx_stats *stats);

-void ieee80211_indicate_packets(struct ieee80211_device *ieee, struct ieee80211_rxb** prxbIndicateArray,u8 index);
+extern void ieee80211_indicate_packets(struct ieee80211_device *ieee,
+ struct ieee80211_rxb **prxbIndicateArray,
+ u8 index);
#define RT_ASOC_RETRY_LIMIT 5
#endif /* IEEE80211_H */
Index: b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c
===================================================================
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c
@@ -304,7 +304,6 @@ ieee80211_classify(struct sk_buff *skb,
}
}

-#define SN_LESS(a, b) (((a-b)&0x800)!=0)
void ieee80211_tx_query_agg_cap(struct ieee80211_device* ieee, struct sk_buff* skb, cb_desc* tcb_desc)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
Index: b/drivers/staging/rtl8192su/ieee80211/ieee80211_wx.c
===================================================================
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_wx.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_wx.c
@@ -541,7 +541,8 @@ int ieee80211_wx_set_encode_ext(struct i
return -EINVAL;
}

- sec.flags |= SEC_ENABLED;// | SEC_ENCRYPT;
+ sec.flags |= SEC_ENABLED;
+
if ((encoding->flags & IW_ENCODE_DISABLED) ||
ext->alg == IW_ENCODE_ALG_NONE) {
if (*crypt)
@@ -644,15 +645,12 @@ int ieee80211_wx_set_encode_ext(struct i
sec.key_sizes[idx] = ext->key_len;
sec.flags |= (1 << idx);
if (ext->alg == IW_ENCODE_ALG_WEP) {
- // sec.encode_alg[idx] = SEC_ALG_WEP;
sec.flags |= SEC_LEVEL;
sec.level = SEC_LEVEL_1;
} else if (ext->alg == IW_ENCODE_ALG_TKIP) {
- // sec.encode_alg[idx] = SEC_ALG_TKIP;
sec.flags |= SEC_LEVEL;
sec.level = SEC_LEVEL_2;
} else if (ext->alg == IW_ENCODE_ALG_CCMP) {
- // sec.encode_alg[idx] = SEC_ALG_CCMP;
sec.flags |= SEC_LEVEL;
sec.level = SEC_LEVEL_3;
}
Index: b/drivers/staging/rtl8192su/r8192U_core.c
===================================================================
--- a/drivers/staging/rtl8192su/r8192U_core.c
+++ b/drivers/staging/rtl8192su/r8192U_core.c
@@ -2709,8 +2709,8 @@ static int rtl8192_qos_handle_probe_resp

/* handle manage frame frame beacon and probe response */
static int rtl8192_handle_beacon(struct net_device * dev,
- struct ieee80211_beacon * beacon,
- struct ieee80211_network * network)
+ struct ieee80211_probe_response *beacon,
+ struct ieee80211_network *network)
{
struct r8192_priv *priv = ieee80211_priv(dev);


\
 
 \ /
  Last update: 2009-07-13 20:11    [W:0.142 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site