lkml.org 
[lkml]   [2009]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Security, resend] Instant crash with rtl8169 and large packets
Eric Dumazet wrote:
> Michael Tokarev a écrit :
>> Eric Dumazet wrote:
>> []
>>> OK I suspect driver is buggy since 2.6.10 days :)
>>>
>>> Could you try this patch ?
>> Tried it, and it appears to work. Tried various MTU combinations
>> and packet sizes. Checked iperf too, with and without the patch
>> and with different MTU too, to be sure the patch does not introduce
>> any slowdowns - everything looks sane. In case the incoming packet
>> is larger than the RX buffer size, `errors' and `frames' RX stats
>> gets incremented.
>>
>> The only somewhat odd thing is that rx path accepts packets larger
>> than MTU by 3 bytes. For example, if I set mtu to 2000, the
>> largest packet I can send is 2003 bytes; with mtu=2002, largest
>> actual packet size is 2005 bytes. This is complete frame - in
>> terms of ping size (ping -s) it's 1975 and 1977 bytes. That to
>> say, maybe we still have some corner case somewhere, for packets
>> larger than mtu by 1, 2 or 3 bytes.
>>
>> Also I didn't try MTU < 1500.
>>
>> Other than that,
>>
>> Tested-By: Michael Tokarev <mjt@tls.msk.ru>
>
> Could you confirm this last patch was ok without former two patches ?

Yes, it's the last patch without former two which were for
debugging as I understand them. Got fresh 2.6.29.4 source
and applied your last patch to it, recompiled. All the testing
above were done this way.

>> And by the way, your email client uses quoted-printable encoding.
>> I had to use trivial perl one-liner to convert your patches to
>> plaintext. JFYI.
>
> Ah yes, this is when I reply to one of your mail, thank you for the hint.
>
> When submitting a new mail, my thunderbird agent uses a regular "Content-Transfer-Encoding: 7bit"

Heh. I know why it's this way. Due to your
"Michael Tokarev a écrit" in first line. Which
gets added by Thunderbird, and which causes it
to force quoted-printable instead of 7bit, because
of this "é". Mine offers "пишет" instead of "écrit"
("wrote" in English) and the result is similar.

> BTW, this driver uses NAPI, but still calls dev_kfree_skb_irq() in rtl8169_tx_interrupt()
>
> You probably can get better performance calling dev_kfree_skb(tx_skb->skb); instead
>
> @@ -3372,7 +3372,7 @@ static void rtl8169_tx_interrupt(struct net_device *dev,
> rtl8169_unmap_tx_skb(tp->pci_dev, tx_skb, tp->TxDescArray + entry);
>
> if (status & LastFrag) {
> - dev_kfree_skb_irq(tx_skb->skb);
> + dev_kfree_skb(tx_skb->skb);
> tx_skb->skb = NULL;
> }
> dirty_tx++;

Well, the performance is quite good -- 935Mb/sec according to iperf
for TCP. With UDP I got 1.05Gb/sec, but CPU usage is 100% during
all test time (for TCP test the CPU is in use for less than 5%).
I'll try the change tomorrow (it's 01:27 here now already).

Thank you for the good work!

/mjt
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2009-06-08 23:31    [W:0.082 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site