Messages in this thread | | | Date | Sun, 7 Jun 2009 12:14:54 +0200 | From | Ingo Molnar <> | Subject | Re: [git pull] dma-debug updates for 2.6.31 |
| |
note, i'm getting this warning:
[ 17.505263] ttyS0: 1 input overrun(s) [ 18.537568] ------------[ cut here ]------------ [ 18.539366] WARNING: at lib/dma-debug.c:812 check_unmap+0x395/0x5e6() [ 18.539366] Hardware name: System Product Name [ 18.539366] forcedeth 0000:00:0a.0: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000003b95296a] [size=90 bytes] [mapped as single] [unmapped as page] [ 18.539366] Pid: 4316, comm: ifup-eth Not tainted 2.6.30-rc8-tip-01994-g0c51e15-dirty #50306 [ 18.539366] Call Trace: [ 18.539366] <IRQ> [<ffffffff8146c4cc>] ? check_unmap+0x395/0x5e6 [ 18.539366] [<ffffffff8105ac13>] warn_slowpath_common+0x83/0xc6 [ 18.539366] [<ffffffff8105acd9>] warn_slowpath_fmt+0x4b/0x61 [ 18.539366] [<ffffffff8146c234>] ? check_unmap+0xfd/0x5e6 [ 18.539366] [<ffffffff8146c4cc>] check_unmap+0x395/0x5e6 [ 18.539366] [<ffffffff8146c99f>] debug_dma_unmap_page+0x5e/0x74 [ 18.539366] [<ffffffff816b1984>] nv_tx_done_optimized+0xb2/0x28a [ 18.539366] [<ffffffff81c9a5d2>] ? _spin_lock_irqsave+0x65/0x85 [ 18.539366] [<ffffffff816b5aa1>] nv_napi_poll+0x28b/0x2ca [ 18.539366] [<ffffffff81a91d03>] net_rx_action+0xbd/0x22b [ 18.539366] [<ffffffff81a91e0b>] ? net_rx_action+0x1c5/0x22b [ 18.539366] [<ffffffff810a5015>] ? __rcu_process_callbacks+0x163/0x216 [ 18.539366] [<ffffffff8106147b>] __do_softirq+0x85/0x136 [ 18.539366] [<ffffffff81058362>] ? copy_signal+0x6b/0x39f [ 18.539366] [<ffffffff8101536c>] call_softirq+0x1c/0x30 [ 18.539366] [<ffffffff8101752d>] do_softirq+0x51/0xae [ 18.539366] [<ffffffff81081a6d>] ? tick_handle_periodic+0x30/0x97 [ 18.539366] [<ffffffff81061081>] irq_exit+0x52/0xaf [ 18.539366] [<ffffffff81030fff>] smp_apic_timer_interrupt+0x9b/0xc1 [ 18.539366] [<ffffffff81014d53>] apic_timer_interrupt+0x13/0x20 [ 18.539366] <EOI> [<ffffffff810e5ac4>] ? kmem_cache_alloc+0x8b/0xcb [ 18.539366] [<ffffffff81058362>] ? copy_signal+0x6b/0x39f [ 18.539366] [<ffffffff811130eb>] ? copy_fs_struct+0xaf/0xd1 [ 18.539366] [<ffffffff810597f2>] ? copy_process+0x580/0xd99 [ 18.539366] [<ffffffff8105a174>] ? do_fork+0x169/0x33a [ 18.539366] [<ffffffff81457c69>] ? __up_read+0x8f/0xb0 [ 18.539366] [<ffffffff81078f3a>] ? up_read+0x35/0x50 [ 18.539366] [<ffffffff810af5bc>] ? perf_swcounter_event+0x30/0x46 [ 18.539366] [<ffffffff8101264d>] ? sys_clone+0x37/0x52 [ 18.539366] [<ffffffff810144f3>] ? stub_clone+0x13/0x20 [ 18.539366] [<ffffffff81014182>] ? system_call_fastpath+0x16/0x1b [ 18.539366] ---[ end trace 1d4adcfbc3df3215 ]--- [ 18.539366] Mapped at: [ 18.539366] [<ffffffff8146ceb0>] debug_dma_map_page+0x8b/0x1b9 [ 18.539366] [<ffffffff816b0eb0>] nv_start_xmit_optimized+0x2a2/0x6c5 [ 18.539366] [<ffffffff81a9503b>] dev_hard_start_xmit+0xd9/0x163 [ 18.539366] [<ffffffff81ab0a12>] __qdisc_run+0xfc/0x223 [ 18.539366] [<ffffffff81a95483>] dev_queue_xmit+0x284/0x3d4 [ 18.544082] ttyS0: 2 input overrun(s) [ 18.639248] eth1: link down
config and full dmesg attached.
Ingo
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.30-rc8-tip-01994-g0c51e15-dirty (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #50306 SMP PREEMPT Sun Jun 7 11:52:45 CEST 2009 [ 0.000000] Command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] console [earlyser0] enabled [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000003fff0000 [ 0.000000] 0000000000 - 003fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 3fff0000 @ 100000-302000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003fff0000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000 [ 0.000000] NODE_DATA [0000000000010000 - 0000000000043fff] [ 0.000000] bootmap [0000000000044000 - 000000000004bfff] pages 8 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 003fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00074ca590] TEXT DATA BSS ==> [0001000000 - 00074ca590] [ 0.000000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #4 [00074cb000 - 00074cb149] BRK ==> [00074cb000 - 00074cb149] [ 0.000000] #5 [0000100000 - 0000300000] PGTABLE ==> [0000100000 - 0000300000] [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [ffff8800000f5680] f5680 [ 0.000000] mpc: f1400-f152c [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262015 [ 0.000000] DMA zone: 88 pages used for memmap [ 0.000000] DMA zone: 611 pages reserved [ 0.000000] DMA zone: 3284 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 5544 pages used for memmap [ 0.000000] DMA32 zone: 252488 pages, LIFO batch:31 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] mpc: f1400-f152c [ 0.000000] MPTABLE: OEM ID: OEM00000 [ 0.000000] MPTABLE: Product ID: PROD00000000 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] Bus #0 is PCI [ 0.000000] Bus #1 is PCI [ 0.000000] Bus #2 is PCI [ 0.000000] Bus #3 is PCI [ 0.000000] Bus #4 is PCI [ 0.000000] Bus #5 is PCI [ 0.000000] Bus #6 is ISA [ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000. [ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 0b [ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 10, APIC ID 2, APIC INT 03 [ 0.000000] Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05 [ 0.000000] Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0b [ 0.000000] Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07 [ 0.000000] Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0a, APIC ID 2, APIC INT 0a [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0c, APIC ID 2, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f [ 0.000000] Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00 [ 0.000000] Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01 [ 0.000000] Processors: 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffffffff5fc000 (fee00000) [ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000) [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff88000754f000, static data 101984 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 255772 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3 [ 0.000000] debug: sysrq always enabled. [ 0.000000] Initializing CPU#0 [ 0.000000] RCU-based detection of stalled CPUs is enabled. [ 0.000000] NR_IRQS:4352 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2010.509 MHz processor. [ 0.000999] spurious 8259A interrupt: IRQ7. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console handover: boot [earlyser0] -> real [ttyS0] [ 0.000999] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000999] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000999] ... MAX_LOCK_DEPTH: 48 [ 0.000999] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000999] ... CLASSHASH_SIZE: 4096 [ 0.000999] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000999] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000999] ... CHAINHASH_SIZE: 16384 [ 0.000999] memory used by lock dependency info: 5695 kB [ 0.000999] per task-struct memory footprint: 1920 bytes [ 0.000999] Checking aperture... [ 0.000999] No AGP bridge found [ 0.000999] Node 0: aperture @ 20000000 size 32 MB [ 0.000999] Aperture pointing to e820 RAM. Ignoring. [ 0.000999] Memory: 910424k/1048512k available (12917k kernel code, 452k absent, 137636k reserved, 6858k data, 800k init) [ 0.000999] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000999] ODEBUG: 11 of 11 active objects replaced [ 0.000999] ODEBUG: selftest passed [ 0.001011] Calibrating delay loop (skipped), value calculated using timer frequency.. 4021.01 BogoMIPS (lpj=2010509) [ 0.004447] Security Framework initialized [ 0.005008] TOMOYO Linux initialized [ 0.006711] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.008938] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.010278] Mount-cache hash table entries: 256 [ 0.012888] Initializing cgroup subsys debug [ 0.013004] Initializing cgroup subsys ns [ 0.014003] Initializing cgroup subsys devices [ 0.015003] Initializing cgroup subsys freezer [ 0.016012] Initializing cgroup subsys net_cls [ 0.017124] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.018000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.019001] CPU 0/0x0 -> Node 0 [ 0.020000] tseg: 0000000000 [ 0.021009] CPU: Physical Processor ID: 0 [ 0.021999] CPU: Processor Core ID: 0 [ 0.023001] mce: CPU supports 5 MCE banks [ 0.024008] AMD Performance Monitoring support detected. [ 0.024998] ... version: 0 [ 0.025998] ... bit width: 48 [ 0.026998] ... num counters: 4 [ 0.027998] ... value mask: 0000ffffffffffff [ 0.028998] ... max period: 00007fffffffffff [ 0.029998] ... fixed counters: 0 [ 0.030997] ... counter mask: 000000000000000f [ 0.033471] Setting APIC routing to flat [ 0.034002] enabled ExtINT on CPU#0 [ 0.035048] ExtINT not setup in hardware but reported by MP table [ 0.036086] ENABLING IO-APIC IRQs [ 0.036997] init IO_APIC IRQs [ 0.037997] 2-0 (apicid-pin) not connected [ 0.040013] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 0.041997] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) [ 0.043006] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:1 Active:1) [ 0.043993] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 0.043993] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:1) [ 0.043993] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) [ 0.043993] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) [ 0.043993] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 0.043993] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0) [ 0.043993] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) [ 0.043993] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:1) [ 0.043993] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 0.043993] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 0.043993] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) [ 0.043993] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) [ 0.043993] 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected [ 0.043993] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.043993] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.043993] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.043993] ..... (found apic 0 pin 0) ... [ 0.054393] ....... works. [ 0.054993] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.057993] Using local APIC timer interrupts. [ 0.057994] calibrating APIC timer ... [ 0.059990] ... lapic delta = 1256243 [ 0.059990] ..... delta 1256243 [ 0.059990] ..... mult: 53963428 [ 0.059990] ..... calibration result: 200998 [ 0.059990] ..... CPU clock speed is 2009.0990 MHz. [ 0.059990] ..... host bus clock speed is 200.0998 MHz. [ 0.059990] ... verify APIC timer [ 0.162664] ... jiffies delta = 100 [ 0.162976] ... jiffies result ok [ 0.163992] calling migration_init+0x0/0x87 @ 1 [ 0.165106] initcall migration_init+0x0/0x87 returned 1 after 0 usecs [ 0.165978] initcall migration_init+0x0/0x87 returned with error code 1 [ 0.166977] calling spawn_ksoftirqd+0x0/0x7f @ 1 [ 0.168043] initcall spawn_ksoftirqd+0x0/0x7f returned 0 after 0 usecs [ 0.168980] calling init_call_single_data+0x0/0xd0 @ 1 [ 0.169982] initcall init_call_single_data+0x0/0xd0 returned 0 after 0 usecs [ 0.170977] calling spawn_softlockup_task+0x0/0x9b @ 1 [ 0.172037] initcall spawn_softlockup_task+0x0/0x9b returned 0 after 0 usecs [ 0.172977] calling relay_init+0x0/0x3b @ 1 [ 0.173978] initcall relay_init+0x0/0x3b returned 0 after 0 usecs [ 0.175236] lockdep: fixing up alternatives. [ 0.176057] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] masked ExtINT on CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 4019.90 BogoMIPS (lpj=2009954) [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000999] CPU 1/0x1 -> Node 0 [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] mce: CPU supports 5 MCE banks [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.248520] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.250981] Brought up 2 CPUs [ 0.251964] Total of 2 processors activated (8040.92 BogoMIPS). [ 0.255206] khelper used greatest stack depth: 5280 bytes left [ 0.265143] calling init_cpufreq_transition_notifier_list+0x0/0x42 @ 1 [ 0.265970] initcall init_cpufreq_transition_notifier_list+0x0/0x42 returned 0 after 0 usecs [ 0.266962] calling net_ns_init+0x0/0x115 @ 1 [ 0.267961] net_namespace: 2112 bytes [ 0.269077] initcall net_ns_init+0x0/0x115 returned 0 after 976 usecs [ 0.269964] calling cpufreq_tsc+0x0/0x28 @ 1 [ 0.270981] initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs [ 0.271962] calling init_lapic_sysfs+0x0/0x52 @ 1 [ 0.273070] initcall init_lapic_sysfs+0x0/0x52 returned 0 after 0 usecs [ 0.273962] calling print_banner+0x0/0xe @ 1 [ 0.274964] Booting paravirtualized kernel on bare hardware [ 0.275961] initcall print_banner+0x0/0xe returned 0 after 976 usecs [ 0.276962] calling init_smp_flush+0x0/0x63 @ 1 [ 0.277962] initcall init_smp_flush+0x0/0x63 returned 0 after 0 usecs [ 0.278962] calling alloc_frozen_cpus+0x0/0x45 @ 1 [ 0.279965] initcall alloc_frozen_cpus+0x0/0x45 returned 0 after 0 usecs [ 0.280960] calling sysctl_init+0x0/0x3d @ 1 [ 0.281964] initcall sysctl_init+0x0/0x3d returned 0 after 0 usecs [ 0.282959] calling ksysfs_init+0x0/0xe4 @ 1 [ 0.284104] initcall ksysfs_init+0x0/0xe4 returned 0 after 0 usecs [ 0.284960] calling async_init+0x0/0x69 @ 1 [ 0.285962] initcall async_init+0x0/0x69 returned 0 after 0 usecs [ 0.286959] calling init_jiffies_clocksource+0x0/0x39 @ 1 [ 0.287964] initcall init_jiffies_clocksource+0x0/0x39 returned 0 after 0 usecs [ 0.288959] calling pm_init+0x0/0x5b @ 1 [ 0.289968] initcall pm_init+0x0/0x5b returned 0 after 0 usecs [ 0.290959] calling init_hw_breakpoint+0x0/0x39 @ 1 [ 0.291960] initcall init_hw_breakpoint+0x0/0x39 returned 0 after 0 usecs [ 0.292958] calling filelock_init+0x0/0x55 @ 1 [ 0.294000] initcall filelock_init+0x0/0x55 returned 0 after 0 usecs [ 0.294957] calling init_misc_binfmt+0x0/0x67 @ 1 [ 0.295967] initcall init_misc_binfmt+0x0/0x67 returned 0 after 0 usecs [ 0.296957] calling init_script_binfmt+0x0/0x3b @ 1 [ 0.297958] initcall init_script_binfmt+0x0/0x3b returned 0 after 0 usecs [ 0.298956] calling init_elf_binfmt+0x0/0x3b @ 1 [ 0.299957] initcall init_elf_binfmt+0x0/0x3b returned 0 after 0 usecs [ 0.300956] calling init_compat_elf_binfmt+0x0/0x3b @ 1 [ 0.301957] initcall init_compat_elf_binfmt+0x0/0x3b returned 0 after 0 usecs [ 0.302957] calling debugfs_init+0x0/0x80 @ 1 [ 0.303963] initcall debugfs_init+0x0/0x80 returned 0 after 0 usecs [ 0.304957] calling securityfs_init+0x0/0x77 @ 1 [ 0.305963] initcall securityfs_init+0x0/0x77 returned 0 after 0 usecs [ 0.306957] calling random32_init+0x0/0xff @ 1 [ 0.307957] initcall random32_init+0x0/0xff returned 0 after 0 usecs [ 0.308957] calling gnttab_init+0x0/0x1c6 @ 1 [ 0.309956] initcall gnttab_init+0x0/0x1c6 returned -19 after 0 usecs [ 0.310956] calling regulator_init+0x0/0x53 @ 1 [ 0.311954] regulator: core version 0.5 [ 0.313047] initcall regulator_init+0x0/0x53 returned 0 after 976 usecs [ 0.313956] calling cpufreq_core_init+0x0/0xaa @ 1 [ 0.314956] initcall cpufreq_core_init+0x0/0xaa returned 0 after 0 usecs [ 0.315954] calling cpuidle_init+0x0/0x66 @ 1 [ 0.316985] initcall cpuidle_init+0x0/0x66 returned 0 after 0 usecs [ 0.317994] calling sock_init+0x0/0x85 @ 1 [ 0.319270] initcall sock_init+0x0/0x85 returned 0 after 0 usecs [ 0.320002] calling net_inuse_init+0x0/0x4d @ 1 [ 0.321007] initcall net_inuse_init+0x0/0x4d returned 0 after 0 usecs [ 0.322002] calling netpoll_init+0x0/0x69 @ 1 [ 0.323003] initcall netpoll_init+0x0/0x69 returned 0 after 0 usecs [ 0.324006] calling netlink_proto_init+0x0/0x16b @ 1 [ 0.325050] NET: Registered protocol family 16 [ 0.326054] initcall netlink_proto_init+0x0/0x16b returned 0 after 976 usecs [ 0.327004] calling bdi_class_init+0x0/0x68 @ 1 [ 0.329192] initcall bdi_class_init+0x0/0x68 returned 0 after 976 usecs [ 0.330007] calling kobject_uevent_init+0x0/0x7b @ 1 [ 0.331021] initcall kobject_uevent_init+0x0/0x7b returned 0 after 0 usecs [ 0.332002] calling gpiolib_sysfs_init+0x0/0xbc @ 1 [ 0.333126] initcall gpiolib_sysfs_init+0x0/0xbc returned 0 after 0 usecs [ 0.334003] calling pcibus_class_init+0x0/0x40 @ 1 [ 0.335122] initcall pcibus_class_init+0x0/0x40 returned 0 after 0 usecs [ 0.336003] calling pci_driver_init+0x0/0x39 @ 1 [ 0.337110] initcall pci_driver_init+0x0/0x39 returned 0 after 0 usecs [ 0.338003] calling lcd_class_init+0x0/0x74 @ 1 [ 0.339125] initcall lcd_class_init+0x0/0x74 returned 0 after 0 usecs [ 0.340004] calling backlight_class_init+0x0/0x84 @ 1 [ 0.341111] initcall backlight_class_init+0x0/0x84 returned 0 after 0 usecs [ 0.342003] calling xenbus_probe_init+0x0/0xe4 @ 1 [ 0.343003] initcall xenbus_probe_init+0x0/0xe4 returned -19 after 0 usecs [ 0.344003] calling tty_class_init+0x0/0x58 @ 1 [ 0.346102] initcall tty_class_init+0x0/0x58 returned 0 after 976 usecs [ 0.347003] calling vtconsole_class_init+0x0/0xe8 @ 1 [ 0.349325] initcall vtconsole_class_init+0x0/0xe8 returned 0 after 976 usecs [ 0.350005] calling register_node_type+0x0/0xa4 @ 1 [ 0.351106] initcall register_node_type+0x0/0xa4 returned 0 after 0 usecs [ 0.352004] calling spi_init+0x0/0xa9 @ 1 [ 0.353145] initcall spi_init+0x0/0xa9 returned 0 after 0 usecs [ 0.354004] calling i2c_init+0x0/0x8c @ 1 [ 0.356165] i2c-core: driver [dummy] registered [ 0.357005] initcall i2c_init+0x0/0x8c returned 0 after 1953 usecs [ 0.358003] calling amd_postcore_init+0x0/0xa3 @ 1 [ 0.359006] node 0 link 0: io port [1000, fffff] [ 0.360003] TOM: 0000000040000000 aka 1024M [ 0.361003] node 0 link 0: mmio [e0000000, efffffff] [ 0.362198] node 0 link 0: mmio [feb00000, fec0ffff] [ 0.363198] node 0 link 0: mmio [a0000, bffff] [ 0.364197] node 0 link 0: mmio [40000000, fed3ffff] [ 0.365197] bus: [00,ff] on node 0 link 0 [ 0.366002] bus: 00 index 0 io port: [0, ffff] [ 0.367002] bus: 00 index 1 mmio: [40000000, fcffffffff] [ 0.368002] bus: 00 index 2 mmio: [feb00000, fec0ffff] [ 0.369002] bus: 00 index 3 mmio: [a0000, bffff] [ 0.370003] initcall amd_postcore_init+0x0/0xa3 returned 0 after 10742 usecs [ 0.371004] calling arch_kdebugfs_init+0x0/0x55 @ 1 [ 0.372042] initcall arch_kdebugfs_init+0x0/0x55 returned 0 after 0 usecs [ 0.373003] calling mtrr_if_init+0x0/0x8a @ 1 [ 0.374014] initcall mtrr_if_init+0x0/0x8a returned 0 after 0 usecs [ 0.375003] calling setup_vcpu_hotplug_event+0x0/0x49 @ 1 [ 0.376003] initcall setup_vcpu_hotplug_event+0x0/0x49 returned -19 after 0 usecs [ 0.377004] calling dmi_id_init+0x0/0xcc @ 1 [ 0.379279] initcall dmi_id_init+0x0/0xcc returned 0 after 976 usecs [ 0.380010] calling dma_bus_init+0x0/0x66 @ 1 [ 0.381111] initcall dma_bus_init+0x0/0x66 returned 0 after 0 usecs [ 0.382004] calling dma_channel_table_init+0x0/0x137 @ 1 [ 0.384009] initcall dma_channel_table_init+0x0/0x137 returned 0 after 976 usecs [ 0.385003] calling dca_init+0x0/0x45 @ 1 [ 0.386002] dca service started, version 1.8 [ 0.387113] initcall dca_init+0x0/0x45 returned 0 after 976 usecs [ 0.388004] calling pci_arch_init+0x0/0x67 @ 1 [ 0.389008] PCI: Using configuration type 1 for base access [ 0.390010] initcall pci_arch_init+0x0/0x67 returned 0 after 976 usecs [ 0.391003] calling topology_init+0x0/0xc2 @ 1 [ 0.392193] initcall topology_init+0x0/0xc2 returned 0 after 0 usecs [ 0.393004] calling mtrr_init_finialize+0x0/0x64 @ 1 [ 0.394003] initcall mtrr_init_finialize+0x0/0x64 returned 0 after 0 usecs [ 0.395003] calling param_sysfs_init+0x0/0xf5 @ 1 [ 0.543278] initcall param_sysfs_init+0x0/0xf5 returned 0 after 143554 usecs [ 0.544005] calling pm_sysrq_init+0x0/0x40 @ 1 [ 0.546070] initcall pm_sysrq_init+0x0/0x40 returned 0 after 0 usecs [ 0.547004] calling init_slow_work+0x0/0x5f @ 1 [ 0.548004] initcall init_slow_work+0x0/0x5f returned 0 after 0 usecs [ 0.549004] calling default_bdi_init+0x0/0x5e @ 1 [ 0.550146] initcall default_bdi_init+0x0/0x5e returned 0 after 0 usecs [ 0.551004] calling init_bio+0x0/0x102 @ 1 [ 0.552405] bio: create slab <bio-0> at 0 [ 0.553099] initcall init_bio+0x0/0x102 returned 0 after 976 usecs [ 0.554005] calling cryptomgr_init+0x0/0x57 @ 1 [ 0.555032] initcall cryptomgr_init+0x0/0x57 returned 0 after 0 usecs [ 0.556004] calling blk_settings_init+0x0/0x51 @ 1 [ 0.557004] initcall blk_settings_init+0x0/0x51 returned 0 after 0 usecs [ 0.558003] calling blk_ioc_init+0x0/0x51 @ 1 [ 0.559046] initcall blk_ioc_init+0x0/0x51 returned 0 after 0 usecs [ 0.560004] calling blk_softirq_init+0x0/0x9b @ 1 [ 0.561006] initcall blk_softirq_init+0x0/0x9b returned 0 after 0 usecs [ 0.562004] calling genhd_device_init+0x0/0x8c @ 1 [ 0.564060] initcall genhd_device_init+0x0/0x8c returned 0 after 976 usecs [ 0.565040] calling gpiolib_debugfs_init+0x0/0x4b @ 1 [ 0.566014] initcall gpiolib_debugfs_init+0x0/0x4b returned 0 after 0 usecs [ 0.567003] calling max7301_init+0x0/0x39 @ 1 [ 0.568128] initcall max7301_init+0x0/0x39 returned 0 after 0 usecs [ 0.570014] calling max732x_init+0x0/0x3b @ 1 [ 0.571117] i2c-core: driver [max732x] registered [ 0.572005] initcall max732x_init+0x0/0x3b returned 0 after 976 usecs [ 0.573009] calling mcp23s08_init+0x0/0x39 @ 1 [ 0.574127] initcall mcp23s08_init+0x0/0x39 returned 0 after 0 usecs [ 0.575004] calling gpio_twl4030_init+0x0/0x39 @ 1 [ 0.576129] initcall gpio_twl4030_init+0x0/0x39 returned 0 after 0 usecs [ 0.577005] calling pci_slot_init+0x0/0x6e @ 1 [ 0.578012] initcall pci_slot_init+0x0/0x6e returned 0 after 0 usecs [ 0.579003] calling setup_shutdown_event+0x0/0x3b @ 1 [ 0.580005] initcall setup_shutdown_event+0x0/0x3b returned 0 after 0 usecs [ 0.581003] calling balloon_init+0x0/0x18d @ 1 [ 0.582003] initcall balloon_init+0x0/0x18d returned -19 after 0 usecs [ 0.583003] calling misc_init+0x0/0xc5 @ 1 [ 0.585111] initcall misc_init+0x0/0xc5 returned 0 after 976 usecs [ 0.586006] calling cn_init+0x0/0x115 @ 1 [ 0.587051] initcall cn_init+0x0/0x115 returned 0 after 0 usecs [ 0.588004] calling tifm_init+0x0/0xab @ 1 [ 0.590086] initcall tifm_init+0x0/0xab returned 0 after 976 usecs [ 0.591003] calling tps_init+0x0/0xa4 @ 1 [ 0.592002] tps65010: version 2 May 2005 [ 0.593119] i2c-core: driver [tps65010] registered [ 0.594126] i2c-core: driver [tps65010] unregistered [ 0.606176] i2c-core: driver [tps65010] registered [ 0.608159] i2c-core: driver [tps65010] unregistered [ 0.620165] i2c-core: driver [tps65010] registered [ 0.622152] i2c-core: driver [tps65010] unregistered [ 0.623003] tps65010: no chip? [ 0.624004] initcall tps_init+0x0/0xa4 returned -19 after 31250 usecs [ 0.625003] calling twl4030_init+0x0/0x3b @ 1 [ 0.626117] i2c-core: driver [twl4030] registered [ 0.627005] initcall twl4030_init+0x0/0x3b returned 0 after 976 usecs [ 0.628003] calling init_scsi+0x0/0xb7 @ 1 [ 0.631116] SCSI subsystem initialized [ 0.632006] initcall init_scsi+0x0/0xb7 returned 0 after 2929 usecs [ 0.633004] calling ata_init+0x0/0xb4 @ 1 [ 0.634104] libata version 3.00 loaded. [ 0.635005] initcall ata_init+0x0/0xb4 returned 0 after 976 usecs [ 0.636003] calling phy_init+0x0/0x57 @ 1 [ 0.638079] initcall phy_init+0x0/0x57 returned 0 after 976 usecs [ 0.639004] calling init_pcmcia_cs+0x0/0x56 @ 1 [ 0.641099] initcall init_pcmcia_cs+0x0/0x56 returned 0 after 976 usecs [ 0.642004] calling nop_usb_xceiv_init+0x0/0x39 @ 1 [ 0.643118] initcall nop_usb_xceiv_init+0x0/0x39 returned 0 after 0 usecs [ 0.644004] calling usb_init+0x0/0x184 @ 1 [ 0.646155] usbcore: registered new interface driver usbfs [ 0.647162] usbcore: registered new interface driver hub [ 0.649027] usbcore: registered new device driver usb [ 0.650005] initcall usb_init+0x0/0x184 returned 0 after 4882 usecs [ 0.651004] calling serio_init+0x0/0xb2 @ 1 [ 0.652111] initcall serio_init+0x0/0xb2 returned 0 after 0 usecs [ 0.653004] calling gameport_init+0x0/0xb2 @ 1 [ 0.654110] initcall gameport_init+0x0/0xb2 returned 0 after 0 usecs [ 0.655004] calling input_init+0x0/0x15d @ 1 [ 0.656111] initcall input_init+0x0/0x15d returned 0 after 0 usecs [ 0.657005] calling init_dvbdev+0x0/0xf5 @ 1 [ 0.658115] initcall init_dvbdev+0x0/0xf5 returned 0 after 0 usecs [ 0.659004] calling power_supply_class_init+0x0/0x5f @ 1 [ 0.660111] initcall power_supply_class_init+0x0/0x5f returned 0 after 0 usecs [ 0.661004] calling thermal_init+0x0/0x7e @ 1 [ 0.663083] initcall thermal_init+0x0/0x7e returned 0 after 976 usecs [ 0.664004] calling md_init+0x0/0xf7 @ 1 [ 0.665023] initcall md_init+0x0/0xf7 returned 0 after 0 usecs [ 0.666003] calling mmc_init+0x0/0x9c @ 1 [ 0.668121] initcall mmc_init+0x0/0x9c returned 0 after 976 usecs [ 0.669004] calling leds_init+0x0/0x67 @ 1 [ 0.670107] initcall leds_init+0x0/0x67 returned 0 after 0 usecs [ 0.671005] calling pci_subsys_init+0x0/0x136 @ 1 [ 0.672002] PCI: Probing PCI hardware [ 0.673027] PCI: Probing PCI hardware (bus 00) [ 0.675095] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.677009] pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc1f] [ 0.678013] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f] [ 0.679005] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f] [ 0.680016] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.681003] pci 0000:00:01.1: PME# disabled [ 0.682043] pci 0000:00:02.0: reg 10 32bit mmio: [0xda102000-0xda102fff] [ 0.683030] pci 0000:00:02.0: supports D1 D2 [ 0.684002] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.685003] pci 0000:00:02.0: PME# disabled [ 0.686038] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff] [ 0.687035] pci 0000:00:02.1: supports D1 D2 [ 0.688002] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.689004] pci 0000:00:02.1: PME# disabled [ 0.691029] pci 0000:00:04.0: reg 10 io port: [0xd400-0xd4ff] [ 0.692005] pci 0000:00:04.0: reg 14 io port: [0xd800-0xd8ff] [ 0.693005] pci 0000:00:04.0: reg 18 32bit mmio: [0xda101000-0xda101fff] [ 0.694024] pci 0000:00:04.0: supports D1 D2 [ 0.695044] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f] [ 0.696081] pci 0000:00:0a.0: reg 10 32bit mmio: [0xda100000-0xda100fff] [ 0.697005] pci 0000:00:0a.0: reg 14 io port: [0xd000-0xd007] [ 0.698027] pci 0000:00:0a.0: supports D1 D2 [ 0.699002] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.700003] pci 0000:00:0a.0: PME# disabled [ 0.701058] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.702003] pci 0000:00:0b.0: PME# disabled [ 0.703061] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.704003] pci 0000:00:0c.0: PME# disabled [ 0.705116] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.706003] pci 0000:00:0d.0: PME# disabled [ 0.707060] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.708007] pci 0000:00:0e.0: PME# disabled [ 0.709240] pci 0000:05:07.0: reg 10 io port: [0xc000-0xc0ff] [ 0.710007] pci 0000:05:07.0: reg 14 32bit mmio: [0xda000000-0xda0000ff] [ 0.711037] pci 0000:05:07.0: supports D1 D2 [ 0.712002] pci 0000:05:07.0: PME# supported from D1 D2 D3hot [ 0.713004] pci 0000:05:07.0: PME# disabled [ 0.714044] pci 0000:00:09.0: transparent bridge [ 0.715004] pci 0000:00:09.0: bridge io port: [0xc000-0xcfff] [ 0.716003] pci 0000:00:09.0: bridge 32bit mmio: [0xda000000-0xda0fffff] [ 0.717251] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] [ 0.718006] pci 0000:01:00.0: reg 14 io port: [0xb000-0xb0ff] [ 0.719006] pci 0000:01:00.0: reg 18 32bit mmio: [0xd9000000-0xd900ffff] [ 0.720017] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.721022] pci 0000:01:00.0: supports D1 D2 [ 0.722040] pci 0000:01:00.1: reg 10 32bit mmio: [0xd9010000-0xd901ffff] [ 0.723042] pci 0000:01:00.1: supports D1 D2 [ 0.724068] pci 0000:00:0e.0: bridge io port: [0xb000-0xbfff] [ 0.725003] pci 0000:00:0e.0: bridge 32bit mmio: [0xd8000000-0xd9ffffff] [ 0.726005] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff] [ 0.733318] pci 0000:00:00.0: default IRQ router [10de:005e] [ 0.734297] initcall pci_subsys_init+0x0/0x136 returned 0 after 60546 usecs [ 0.735136] calling proto_init+0x0/0x39 @ 1 [ 0.736018] initcall proto_init+0x0/0x39 returned 0 after 0 usecs [ 0.737003] calling net_dev_init+0x0/0x1ce @ 1 [ 0.739303] initcall net_dev_init+0x0/0x1ce returned 0 after 976 usecs [ 0.740004] calling neigh_init+0x0/0x98 @ 1 [ 0.741004] initcall neigh_init+0x0/0x98 returned 0 after 0 usecs [ 0.742003] calling fib_rules_init+0x0/0xcc @ 1 [ 0.743005] initcall fib_rules_init+0x0/0xcc returned 0 after 0 usecs [ 0.744003] calling pktsched_init+0x0/0xeb @ 1 [ 0.745028] initcall pktsched_init+0x0/0xeb returned 0 after 0 usecs [ 0.746003] calling tc_filter_init+0x0/0x73 @ 1 [ 0.747003] initcall tc_filter_init+0x0/0x73 returned 0 after 0 usecs [ 0.748003] calling tc_action_init+0x0/0x73 @ 1 [ 0.749003] initcall tc_action_init+0x0/0x73 returned 0 after 0 usecs [ 0.750003] calling genl_init+0x0/0x100 @ 1 [ 0.755053] initcall genl_init+0x0/0x100 returned 0 after 3906 usecs [ 0.756004] calling cipso_v4_init+0x0/0xae @ 1 [ 0.757025] initcall cipso_v4_init+0x0/0xae returned 0 after 0 usecs [ 0.758003] calling wanrouter_init+0x0/0x79 @ 1 [ 0.759003] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. [ 0.760026] initcall wanrouter_init+0x0/0x79 returned 0 after 976 usecs [ 0.761003] calling irda_init+0x0/0xb8 @ 1 [ 0.762072] NET: Registered protocol family 23 [ 0.763107] initcall irda_init+0x0/0xb8 returned 0 after 976 usecs [ 0.764003] calling wireless_nlevent_init+0x0/0x69 @ 1 [ 0.765004] initcall wireless_nlevent_init+0x0/0x69 returned 0 after 0 usecs [ 0.766003] calling netlbl_init+0x0/0xa8 @ 1 [ 0.767002] NetLabel: Initializing [ 0.768002] NetLabel: domain hash size = 128 [ 0.769001] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.770181] NetLabel: unlabeled traffic allowed by default [ 0.772003] initcall netlbl_init+0x0/0xa8 returned 0 after 4882 usecs [ 0.773003] calling rfkill_init+0x0/0x8a @ 1 [ 0.774116] initcall rfkill_init+0x0/0x8a returned 0 after 0 usecs [ 0.775004] calling sysctl_init+0x0/0x6f @ 1 [ 0.776005] initcall sysctl_init+0x0/0x6f returned 0 after 0 usecs [ 0.777005] calling xen_mc_debugfs+0x0/0x13f @ 1 [ 0.778098] initcall xen_mc_debugfs+0x0/0x13f returned 0 after 0 usecs [ 0.779004] calling xen_mmu_debugfs+0x0/0x2e5 @ 1 [ 0.781031] initcall xen_mmu_debugfs+0x0/0x2e5 returned 0 after 976 usecs [ 0.782003] calling xen_spinlock_debugfs+0x0/0x275 @ 1 [ 0.783170] initcall xen_spinlock_debugfs+0x0/0x275 returned 0 after 0 usecs [ 0.784004] calling pci_iommu_init+0x0/0x54 @ 1 [ 0.846432] DMA-API: preallocated 32768 debug entries [ 0.847002] DMA-API: debugging enabled by kernel config [ 0.849198] initcall pci_iommu_init+0x0/0x54 returned 0 after 62500 usecs [ 0.850007] calling print_all_ICs+0x0/0xcc @ 1 [ 0.851002] [ 0.851003] printing PIC contents [ 0.852004] ... PIC IMR: fffa [ 0.853000] ... PIC IRR: 0001 [ 0.853001] ... PIC ISR: 0001 [ 0.854003] ... PIC ELCR: 0828 [ 0.855004] [ 0.855004] printing local APIC contents on CPU#0/0: [ 0.856000] ... APIC ID: 00000000 (0) [ 0.856000] ... APIC VERSION: 00040010 [ 0.856000] ... APIC TASKPRI: 00000000 (00) [ 0.856000] ... APIC ARBPRI: 000000e0 (e0) [ 0.856000] ... APIC PROCPRI: 00000000 [ 0.856000] ... APIC LDR: 01000000 [ 0.856000] ... APIC DFR: ffffffff [ 0.856000] ... APIC SPIV: 000001ff [ 0.856000] ... APIC ISR field: [ 0.856000] 0123456789abcdef0123456789abcdef [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] ... APIC TMR field: [ 0.856000] 0123456789abcdef0123456789abcdef [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] ... APIC IRR field: [ 0.856000] 0123456789abcdef0123456789abcdef [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000010000000000000000 [ 0.856000] ... APIC ESR: 00000000 [ 0.856000] ... APIC ICR: 000008fd [ 0.856000] ... APIC ICR2: 02000000 [ 0.856000] ... APIC LVTT: 000200ef [ 0.856000] ... APIC LVTPC: 00000400 [ 0.856000] ... APIC LVT0: 00010700 [ 0.856000] ... APIC LVT1: 00000400 [ 0.856000] ... APIC LVTERR: 000000fe [ 0.856000] ... APIC TMICT: 00003112 [ 0.856000] ... APIC TMCCT: 00000757 [ 0.856000] ... APIC TDCR: 00000003 [ 0.856000] [ 0.855999] [ 0.855999] printing local APIC contents on CPU#1/1: [ 0.856000] ... APIC ID: 01000000 (1) [ 0.856000] ... APIC VERSION: 00040010 [ 0.856000] ... APIC TASKPRI: 00000000 (00) [ 0.856000] ... APIC ARBPRI: 000000e0 (e0) [ 0.856000] ... APIC PROCPRI: 00000000 [ 0.856000] ... APIC LDR: 02000000 [ 0.856000] ... APIC DFR: ffffffff [ 0.856000] ... APIC SPIV: 000001ff [ 0.856000] ... APIC ISR field: [ 0.856000] 0123456789abcdef0123456789abcdef [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] ... APIC TMR field: [ 0.856000] 0123456789abcdef0123456789abcdef [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] ... APIC IRR field: [ 0.856000] 0123456789abcdef0123456789abcdef [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000000000000000000000 [ 0.856000] 00000000000000010000000000000000 [ 0.856000] ... APIC ESR: 00000000 [ 0.856000] ... APIC ICR: 000008fd [ 0.856000] ... APIC ICR2: 01000000 [ 0.856000] ... APIC LVTT: 000200ef [ 0.856000] ... APIC LVTPC: 00010400 [ 0.856000] ... APIC LVT0: 00010700 [ 0.856000] ... APIC LVT1: 00010400 [ 0.856000] ... APIC LVTERR: 000000fe [ 0.856000] ... APIC TMICT: 00003112 [ 0.856000] ... APIC TMCCT: 00001784 [ 0.856000] ... APIC TDCR: 00000003 [ 0.856000] [ 1.071078] number of MP IRQ sources: 17. [ 1.072002] number of IO-APIC #2 registers: 24. [ 1.073002] testing the IO APIC....................... [ 1.074005] [ 1.075002] IO APIC #2...... [ 1.076002] .... register #00: 00000000 [ 1.077002] ....... : physical APIC id: 00 [ 1.078002] ....... : Delivery Type: 0 [ 1.079002] ....... : LTS : 0 [ 1.080002] .... register #01: 00170011 [ 1.081002] ....... : max redirection entries: 0017 [ 1.082002] ....... : PRQ implemented: 0 [ 1.083002] ....... : IO APIC version: 0011 [ 1.084002] .... register #02: 00000000 [ 1.085002] ....... : arbitration: 00 [ 1.086002] .... IRQ redirection table: [ 1.087002] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 1.088004] 00 003 0 0 0 0 0 1 1 30 [ 1.090004] 01 003 0 0 0 0 0 1 1 31 [ 1.092004] 02 000 1 0 0 0 0 0 0 00 [ 1.094004] 03 003 1 1 0 1 0 1 1 33 [ 1.096004] 04 003 0 0 0 0 0 1 1 34 [ 1.098004] 05 003 1 1 0 1 0 1 1 35 [ 1.100004] 06 003 0 0 0 0 0 1 1 36 [ 1.102004] 07 003 1 0 0 0 0 1 1 37 [ 1.104004] 08 003 0 0 0 0 0 1 1 38 [ 1.106004] 09 003 0 0 0 0 0 1 1 39 [ 1.108004] 0a 003 0 0 0 0 0 1 1 3A [ 1.110004] 0b 003 1 1 0 1 0 1 1 3B [ 1.112004] 0c 003 0 0 0 0 0 1 1 3C [ 1.114004] 0d 003 0 0 0 0 0 1 1 3D [ 1.116004] 0e 003 0 0 0 0 0 1 1 3E [ 1.118004] 0f 003 0 0 0 0 0 1 1 3F [ 1.120004] 10 000 1 0 0 0 0 0 0 00 [ 1.122004] 11 000 1 0 0 0 0 0 0 00 [ 1.124004] 12 000 1 0 0 0 0 0 0 00 [ 1.126004] 13 000 1 0 0 0 0 0 0 00 [ 1.128004] 14 000 1 0 0 0 0 0 0 00 [ 1.130004] 15 000 1 0 0 0 0 0 0 00 [ 1.132004] 16 000 1 0 0 0 0 0 0 00 [ 1.134004] 17 000 1 0 0 0 0 0 0 00 [ 1.136002] IRQ to pin mappings: [ 1.137002] IRQ0 -> 0:0 [ 1.139190] IRQ1 -> 0:1 [ 1.140735] IRQ3 -> 0:3 [ 1.142199] IRQ4 -> 0:4 [ 1.143736] IRQ5 -> 0:5 [ 1.145199] IRQ6 -> 0:6 [ 1.146728] IRQ7 -> 0:7 [ 1.148199] IRQ8 -> 0:8 [ 1.149728] IRQ9 -> 0:9 [ 1.151197] IRQ10 -> 0:10 [ 1.153002] IRQ11 -> 0:11 [ 1.155199] IRQ12 -> 0:12 [ 1.157199] IRQ13 -> 0:13 [ 1.159002] IRQ14 -> 0:14 [ 1.161199] IRQ15 -> 0:15 [ 1.163594] .................................... done. [ 1.164005] initcall print_all_ICs+0x0/0xcc returned 0 after 305664 usecs [ 1.165004] calling hpet_late_init+0x0/0xa0 @ 1 [ 1.166004] initcall hpet_late_init+0x0/0xa0 returned -19 after 0 usecs [ 1.167005] calling clocksource_done_booting+0x0/0x37 @ 1 [ 1.168004] initcall clocksource_done_booting+0x0/0x37 returned 0 after 0 usecs [ 1.169004] calling init_pipe_fs+0x0/0x72 @ 1 [ 1.170120] initcall init_pipe_fs+0x0/0x72 returned 0 after 0 usecs [ 1.171004] calling init_mnt_writers+0x0/0xb7 @ 1 [ 1.172005] initcall init_mnt_writers+0x0/0xb7 returned 0 after 0 usecs [ 1.173003] calling eventpoll_init+0x0/0x102 @ 1 [ 1.174143] initcall eventpoll_init+0x0/0x102 returned 0 after 0 usecs [ 1.175003] calling anon_inode_init+0x0/0x147 @ 1 [ 1.176046] initcall anon_inode_init+0x0/0x147 returned 0 after 0 usecs [ 1.177004] calling fscache_init+0x0/0xd1 @ 1 [ 1.178010] Slow work thread pool: Starting up [ 1.179082] Slow work thread pool: Ready [ 1.180085] FS-Cache: Loaded [ 1.181004] initcall fscache_init+0x0/0xd1 returned 0 after 2929 usecs [ 1.182004] calling cachefiles_init+0x0/0xb3 @ 1 [ 1.184232] CacheFiles: Loaded [ 1.185005] initcall cachefiles_init+0x0/0xb3 returned 0 after 1953 usecs [ 1.186004] calling tomoyo_initerface_init+0x0/0x181 @ 1 [ 1.187166] initcall tomoyo_initerface_init+0x0/0x181 returned 0 after 0 usecs [ 1.188004] calling chr_dev_init+0x0/0xca @ 1 [ 1.191195] initcall chr_dev_init+0x0/0xca returned 0 after 1953 usecs [ 1.192006] calling firmware_class_init+0x0/0x9f @ 1 [ 1.193108] initcall firmware_class_init+0x0/0x9f returned 0 after 0 usecs [ 1.194006] calling cpufreq_gov_performance_init+0x0/0x39 @ 1 [ 1.195015] initcall cpufreq_gov_performance_init+0x0/0x39 returned 0 after 0 usecs [ 1.196004] calling ssb_modinit+0x0/0x9b @ 1 [ 1.197113] initcall ssb_modinit+0x0/0x9b returned 0 after 0 usecs [ 1.198005] calling pcibios_assign_resources+0x0/0xb1 @ 1 [ 1.199112] pci 0000:00:09.0: PCI bridge, secondary bus 0000:05 [ 1.200004] pci 0000:00:09.0: IO window: 0xc000-0xcfff [ 1.201005] pci 0000:00:09.0: MEM window: 0xda000000-0xda0fffff [ 1.202004] pci 0000:00:09.0: PREFETCH window: disabled [ 1.203005] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04 [ 1.204002] pci 0000:00:0b.0: IO window: disabled [ 1.205004] pci 0000:00:0b.0: MEM window: disabled [ 1.206003] pci 0000:00:0b.0: PREFETCH window: disabled [ 1.207005] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 1.208002] pci 0000:00:0c.0: IO window: disabled [ 1.209004] pci 0000:00:0c.0: MEM window: disabled [ 1.210003] pci 0000:00:0c.0: PREFETCH window: disabled [ 1.211005] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02 [ 1.212002] pci 0000:00:0d.0: IO window: disabled [ 1.213004] pci 0000:00:0d.0: MEM window: disabled [ 1.214003] pci 0000:00:0d.0: PREFETCH window: disabled [ 1.215011] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01 [ 1.216003] pci 0000:00:0e.0: IO window: 0xb000-0xbfff [ 1.217004] pci 0000:00:0e.0: MEM window: 0xd8000000-0xd9ffffff [ 1.218004] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff [ 1.219011] pci 0000:00:09.0: setting latency timer to 64 [ 1.220011] pci 0000:00:0b.0: setting latency timer to 64 [ 1.221007] pci 0000:00:0c.0: setting latency timer to 64 [ 1.222007] pci 0000:00:0d.0: setting latency timer to 64 [ 1.223007] pci 0000:00:0e.0: setting latency timer to 64 [ 1.224005] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.225003] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 1.226004] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff] [ 1.227003] pci_bus 0000:05: resource 1 mem: [0xda000000-0xda0fffff] [ 1.228003] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 1.229003] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 1.230004] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 1.231003] pci_bus 0000:01: resource 1 mem: [0xd8000000-0xd9ffffff] [ 1.232003] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff] [ 1.233005] initcall pcibios_assign_resources+0x0/0xb1 returned 0 after 33203 usecs [ 1.234003] calling sysctl_core_init+0x0/0x5f @ 1 [ 1.235018] initcall sysctl_core_init+0x0/0x5f returned 0 after 0 usecs [ 1.236004] calling inet_init+0x0/0x1ff @ 1 [ 1.237321] NET: Registered protocol family 2 [ 1.250338] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 1.253313] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 1.257438] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) [ 1.261589] TCP: Hash tables configured (established 131072 bind 65536) [ 1.262042] TCP reno registered [ 1.266280] initcall inet_init+0x0/0x1ff returned 0 after 28320 usecs [ 1.267005] calling af_unix_init+0x0/0x7b @ 1 [ 1.268095] NET: Registered protocol family 1 [ 1.269022] initcall af_unix_init+0x0/0x7b returned 0 after 976 usecs [ 1.270006] calling populate_rootfs+0x0/0x131 @ 1 [ 1.272491] initcall populate_rootfs+0x0/0x131 returned 0 after 976 usecs [ 1.273005] calling calgary_fixup_tce_spaces+0x0/0x121 @ 1 [ 1.274004] initcall calgary_fixup_tce_spaces+0x0/0x121 returned -19 after 0 usecs [ 1.275004] calling i8259A_init_sysfs+0x0/0x49 @ 1 [ 1.276178] initcall i8259A_init_sysfs+0x0/0x49 returned 0 after 0 usecs [ 1.277004] calling vsyscall_init+0x0/0x6c @ 1 [ 1.278014] initcall vsyscall_init+0x0/0x6c returned 0 after 0 usecs [ 1.279003] calling sbf_init+0x0/0x118 @ 1 [ 1.280004] initcall sbf_init+0x0/0x118 returned 0 after 0 usecs [ 1.281004] calling i8237A_init_sysfs+0x0/0x49 @ 1 [ 1.282128] initcall i8237A_init_sysfs+0x0/0x49 returned 0 after 0 usecs [ 1.283004] calling add_rtc_cmos+0x0/0x68 @ 1 [ 1.285125] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.286005] initcall add_rtc_cmos+0x0/0x68 returned 0 after 1953 usecs [ 1.287003] calling ds_selftest+0x0/0x95 @ 1 [ 1.288004] initcall ds_selftest+0x0/0x95 returned 0 after 0 usecs [ 1.288005] Clocksource tsc unstable (delta = 841293790 ns) [ 1.289005] calling cache_sysfs_init+0x0/0x8d @ 1 [ 1.291999] initcall cache_sysfs_init+0x0/0x8d returned 0 after 976 usecs [ 1.292005] calling cpu_debug_init+0x0/0x4c @ 1 [ 1.295840] cpu0(2) debug files 130 [ 1.298920] cpu1(2) debug files 130 [ 1.299008] initcall cpu_debug_init+0x0/0x4c returned 0 after 5859 usecs [ 1.300005] calling mce_init_device+0x0/0xda @ 1 [ 1.302238] initcall mce_init_device+0x0/0xda returned 0 after 976 usecs [ 1.303005] calling thermal_throttle_init_device+0x0/0xbe @ 1 [ 1.304004] initcall thermal_throttle_init_device+0x0/0xbe returned 0 after 0 usecs [ 1.305004] calling msr_init+0x0/0x160 @ 1 [ 1.306132] initcall msr_init+0x0/0x160 returned 0 after 0 usecs [ 1.307004] calling cpuid_init+0x0/0x160 @ 1 [ 1.309239] initcall cpuid_init+0x0/0x160 returned 0 after 976 usecs [ 1.310116] calling ioapic_init_sysfs+0x0/0xd2 @ 1 [ 1.312024] initcall ioapic_init_sysfs+0x0/0xd2 returned 0 after 976 usecs [ 1.313024] calling add_pcspkr+0x0/0x4f @ 1 [ 1.314096] initcall add_pcspkr+0x0/0x4f returned 0 after 0 usecs [ 1.315005] calling microcode_init+0x0/0x140 @ 1 [ 1.316015] microcode: no support for this CPU vendor [ 1.317004] initcall microcode_init+0x0/0x140 returned -19 after 976 usecs [ 1.318006] calling start_pageattr_test+0x0/0x67 @ 1 [ 1.319068] initcall start_pageattr_test+0x0/0x67 returned 0 after 0 usecs [ 1.320005] calling pt_dump_init+0x0/0x52 @ 1 [ 1.321022] initcall pt_dump_init+0x0/0x52 returned 0 after 0 usecs [ 1.322004] calling aes_init+0x0/0x39 @ 1 [ 1.323135] initcall aes_init+0x0/0x39 returned 0 after 0 usecs [ 1.324004] calling init+0x0/0x39 @ 1 [ 1.325060] initcall init+0x0/0x39 returned 0 after 0 usecs [ 1.326004] calling aesni_init+0x0/0xde @ 1 [ 1.327002] Intel AES-NI instructions are not detected. [ 1.328004] initcall aesni_init+0x0/0xde returned -19 after 976 usecs [ 1.329003] calling init_vdso_vars+0x0/0x272 @ 1 [ 1.330021] initcall init_vdso_vars+0x0/0x272 returned 0 after 0 usecs [ 1.331004] calling ia32_binfmt_init+0x0/0x3b @ 1 [ 1.332009] initcall ia32_binfmt_init+0x0/0x3b returned 0 after 0 usecs [ 1.333003] calling sysenter_setup+0x0/0xfb @ 1 [ 1.334011] initcall sysenter_setup+0x0/0xfb returned 0 after 0 usecs [ 1.335004] calling proc_execdomains_init+0x0/0x49 @ 1 [ 1.336018] initcall proc_execdomains_init+0x0/0x49 returned 0 after 0 usecs [ 1.337004] calling ioresources_init+0x0/0x63 @ 1 [ 1.338019] initcall ioresources_init+0x0/0x63 returned 0 after 0 usecs [ 1.339004] calling uid_cache_init+0x0/0xb4 @ 1 [ 1.340068] initcall uid_cache_init+0x0/0xb4 returned 0 after 0 usecs [ 1.341004] calling init_posix_timers+0x0/0x103 @ 1 [ 1.342053] initcall init_posix_timers+0x0/0x103 returned 0 after 0 usecs [ 1.343004] calling init_posix_cpu_timers+0x0/0xd6 @ 1 [ 1.344004] initcall init_posix_cpu_timers+0x0/0xd6 returned 0 after 0 usecs [ 1.345003] calling nsproxy_cache_init+0x0/0x54 @ 1 [ 1.346092] initcall nsproxy_cache_init+0x0/0x54 returned 0 after 0 usecs [ 1.347006] calling create_proc_profile+0x0/0x8c @ 1 [ 1.348005] initcall create_proc_profile+0x0/0x8c returned 0 after 0 usecs [ 1.349003] calling timekeeping_init_device+0x0/0x49 @ 1 [ 1.350118] initcall timekeeping_init_device+0x0/0x49 returned 0 after 0 usecs [ 1.351004] calling init_clocksource_sysfs+0x0/0x77 @ 1 [ 1.352118] initcall init_clocksource_sysfs+0x0/0x77 returned 0 after 0 usecs [ 1.353005] calling init_timer_list_procfs+0x0/0x53 @ 1 [ 1.354013] initcall init_timer_list_procfs+0x0/0x53 returned 0 after 0 usecs [ 1.355003] calling lockdep_proc_init+0x0/0x69 @ 1 [ 1.356019] initcall lockdep_proc_init+0x0/0x69 returned 0 after 0 usecs [ 1.357003] calling futex_init+0x0/0xac @ 1 [ 1.358024] initcall futex_init+0x0/0xac returned 0 after 0 usecs [ 1.359005] calling init_rttest+0x0/0x17f @ 1 [ 1.363142] Initializing RT-Tester: OK [ 1.364006] initcall init_rttest+0x0/0x17f returned 0 after 3906 usecs [ 1.365005] calling proc_dma_init+0x0/0x49 @ 1 [ 1.366015] initcall proc_dma_init+0x0/0x49 returned 0 after 0 usecs [ 1.367004] calling kallsyms_init+0x0/0x4c @ 1 [ 1.368011] initcall kallsyms_init+0x0/0x4c returned 0 after 0 usecs [ 1.369004] calling crash_save_vmcoreinfo_init+0x0/0x492 @ 1 [ 1.371005] initcall crash_save_vmcoreinfo_init+0x0/0x492 returned 0 after 976 usecs [ 1.372004] calling crash_notes_memory_init+0x0/0x5f @ 1 [ 1.373010] initcall crash_notes_memory_init+0x0/0x5f returned 0 after 0 usecs [ 1.374004] calling pid_namespaces_init+0x0/0x54 @ 1 [ 1.375057] initcall pid_namespaces_init+0x0/0x54 returned 0 after 0 usecs [ 1.376004] calling rcu_torture_init+0x0/0x6fb @ 1 [ 1.377033] rcu-torture:--- Start of test: nreaders=4 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1 [ 1.379108] initcall rcu_torture_init+0x0/0x6fb returned 0 after 1953 usecs [ 1.380094] calling utsname_sysctl_init+0x0/0x3b @ 1 [ 1.381010] initcall utsname_sysctl_init+0x0/0x3b returned 0 after 0 usecs [ 1.382004] calling perf_counter_sysfs_init+0x0/0x40 @ 1 [ 1.383017] initcall perf_counter_sysfs_init+0x0/0x40 returned 0 after 0 usecs [ 1.384004] calling init_per_zone_pages_min+0x0/0xb2 @ 1 [ 1.385112] initcall init_per_zone_pages_min+0x0/0xb2 returned 0 after 0 usecs [ 1.386004] calling pdflush_init+0x0/0x43 @ 1 [ 1.387053] initcall pdflush_init+0x0/0x43 returned 0 after 0 usecs [ 1.388005] calling kswapd_init+0x0/0xa1 @ 1 [ 1.389049] initcall kswapd_init+0x0/0xa1 returned 0 after 0 usecs [ 1.390005] calling init_tmpfs+0x0/0x105 @ 1 [ 1.392064] initcall init_tmpfs+0x0/0x105 returned 0 after 976 usecs [ 1.393004] calling setup_vmstat+0x0/0xf0 @ 1 [ 1.394047] initcall setup_vmstat+0x0/0xf0 returned 0 after 0 usecs [ 1.395004] calling mm_sysfs_init+0x0/0x50 @ 1 [ 1.396015] initcall mm_sysfs_init+0x0/0x50 returned 0 after 0 usecs [ 1.397004] calling proc_vmalloc_init+0x0/0x4c @ 1 [ 1.398022] initcall proc_vmalloc_init+0x0/0x4c returned 0 after 0 usecs [ 1.399005] calling hugetlb_init+0x0/0x230 @ 1 [ 1.400009] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.401030] initcall hugetlb_init+0x0/0x230 returned 0 after 976 usecs [ 1.402003] calling slab_proc_init+0x0/0x4c @ 1 [ 1.403012] initcall slab_proc_init+0x0/0x4c returned 0 after 0 usecs [ 1.404003] calling slab_sysfs_init+0x0/0x11b @ 1 [ 1.434340] initcall slab_sysfs_init+0x0/0x11b returned 0 after 28320 usecs [ 1.435005] calling fasync_init+0x0/0x51 @ 1 [ 1.436330] initcall fasync_init+0x0/0x51 returned 0 after 0 usecs [ 1.437004] calling proc_filesystems_init+0x0/0x49 @ 1 [ 1.438094] initcall proc_filesystems_init+0x0/0x49 returned 0 after 0 usecs [ 1.439004] calling inotify_setup+0x0/0x37 @ 1 [ 1.440004] initcall inotify_setup+0x0/0x37 returned 0 after 0 usecs [ 1.441003] calling aio_setup+0x0/0x9c @ 1 [ 1.443152] initcall aio_setup+0x0/0x9c returned 0 after 976 usecs [ 1.444017] calling proc_locks_init+0x0/0x49 @ 1 [ 1.445014] initcall proc_locks_init+0x0/0x49 returned 0 after 0 usecs [ 1.446004] calling init_sys32_ioctl+0x0/0xac @ 1 [ 1.447020] initcall init_sys32_ioctl+0x0/0xac returned 0 after 0 usecs [ 1.448003] calling init_mbcache+0x0/0x3b @ 1 [ 1.449005] initcall init_mbcache+0x0/0x3b returned 0 after 0 usecs [ 1.450003] calling dquot_init+0x0/0x12a @ 1 [ 1.451003] VFS: Disk quotas dquot_6.5.2 [ 1.452291] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.453057] initcall dquot_init+0x0/0x12a returned 0 after 1953 usecs [ 1.454018] calling init_v1_quota_format+0x0/0x39 @ 1 [ 1.455005] initcall init_v1_quota_format+0x0/0x39 returned 0 after 0 usecs [ 1.456003] calling init_v2_quota_format+0x0/0x39 @ 1 [ 1.457004] initcall init_v2_quota_format+0x0/0x39 returned 0 after 0 usecs [ 1.458004] calling proc_cmdline_init+0x0/0x49 @ 1 [ 1.459014] initcall proc_cmdline_init+0x0/0x49 returned 0 after 0 usecs [ 1.460003] calling proc_cpuinfo_init+0x0/0x49 @ 1 [ 1.461012] initcall proc_cpuinfo_init+0x0/0x49 returned 0 after 0 usecs [ 1.462004] calling proc_devices_init+0x0/0x49 @ 1 [ 1.463011] initcall proc_devices_init+0x0/0x49 returned 0 after 0 usecs [ 1.464003] calling proc_interrupts_init+0x0/0x49 @ 1 [ 1.465012] initcall proc_interrupts_init+0x0/0x49 returned 0 after 0 usecs [ 1.466003] calling proc_loadavg_init+0x0/0x49 @ 1 [ 1.467011] initcall proc_loadavg_init+0x0/0x49 returned 0 after 0 usecs [ 1.468003] calling proc_meminfo_init+0x0/0x49 @ 1 [ 1.469012] initcall proc_meminfo_init+0x0/0x49 returned 0 after 0 usecs [ 1.470003] calling proc_stat_init+0x0/0x49 @ 1 [ 1.471012] initcall proc_stat_init+0x0/0x49 returned 0 after 0 usecs [ 1.472003] calling proc_uptime_init+0x0/0x49 @ 1 [ 1.473012] initcall proc_uptime_init+0x0/0x49 returned 0 after 0 usecs [ 1.474004] calling proc_version_init+0x0/0x49 @ 1 [ 1.475023] initcall proc_version_init+0x0/0x49 returned 0 after 0 usecs [ 1.476007] calling proc_kcore_init+0x0/0x70 @ 1 [ 1.477012] initcall proc_kcore_init+0x0/0x70 returned 0 after 0 usecs [ 1.478003] calling vmcore_init+0x0/0x9e @ 1 [ 1.479004] initcall vmcore_init+0x0/0x9e returned 0 after 0 usecs [ 1.480003] calling proc_kmsg_init+0x0/0x4c @ 1 [ 1.481012] initcall proc_kmsg_init+0x0/0x4c returned 0 after 0 usecs [ 1.482004] calling proc_page_init+0x0/0x69 @ 1 [ 1.483019] initcall proc_page_init+0x0/0x69 returned 0 after 0 usecs [ 1.484003] calling configfs_init+0x0/0xfb @ 1 [ 1.485233] initcall configfs_init+0x0/0xfb returned 0 after 0 usecs [ 1.486004] calling init_devpts_fs+0x0/0x65 @ 1 [ 1.487104] initcall init_devpts_fs+0x0/0x65 returned 0 after 0 usecs [ 1.488004] calling init_dlm+0x0/0xbe @ 1 [ 1.490158] DLM (built Jun 7 2009 11:52:11) installed [ 1.491007] initcall init_dlm+0x0/0xbe returned 0 after 1953 usecs [ 1.492004] calling init_ext3_fs+0x0/0x99 @ 1 [ 1.494204] initcall init_ext3_fs+0x0/0x99 returned 0 after 976 usecs [ 1.495004] calling init_ext2_fs+0x0/0x89 @ 1 [ 1.496228] initcall init_ext2_fs+0x0/0x89 returned 0 after 0 usecs [ 1.497004] calling init_ext4_fs+0x0/0x106 @ 1 [ 1.500222] initcall init_ext4_fs+0x0/0x106 returned 0 after 1953 usecs [ 1.501005] calling journal_init+0x0/0xf5 @ 1 [ 1.504102] initcall journal_init+0x0/0xf5 returned 0 after 1953 usecs [ 1.505004] calling journal_init+0x0/0x112 @ 1 [ 1.507301] initcall journal_init+0x0/0x112 returned 0 after 976 usecs [ 1.508004] calling init_ramfs_fs+0x0/0x39 @ 1 [ 1.509006] initcall init_ramfs_fs+0x0/0x39 returned 0 after 0 usecs [ 1.510003] calling init_hugetlbfs_fs+0x0/0xbe @ 1 [ 1.511243] initcall init_hugetlbfs_fs+0x0/0xbe returned 0 after 0 usecs [ 1.512005] calling init_fat_fs+0x0/0x75 @ 1 [ 1.514483] initcall init_fat_fs+0x0/0x75 returned 0 after 976 usecs [ 1.515005] calling init_vfat_fs+0x0/0x39 @ 1 [ 1.516006] initcall init_vfat_fs+0x0/0x39 returned 0 after 0 usecs [ 1.517004] calling init_nfsd+0x0/0x109 @ 1 [ 1.518003] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.522403] initcall init_nfsd+0x0/0x109 returned 0 after 3906 usecs [ 1.523005] calling init_nlm+0x0/0x49 @ 1 [ 1.524022] initcall init_nlm+0x0/0x49 returned 0 after 0 usecs [ 1.525004] calling init_nls_cp737+0x0/0x39 @ 1 [ 1.526012] initcall init_nls_cp737+0x0/0x39 returned 0 after 0 usecs [ 1.527004] calling init_nls_cp852+0x0/0x39 @ 1 [ 1.528004] initcall init_nls_cp852+0x0/0x39 returned 0 after 0 usecs [ 1.529004] calling init_nls_cp857+0x0/0x39 @ 1 [ 1.530004] initcall init_nls_cp857+0x0/0x39 returned 0 after 0 usecs [ 1.531004] calling init_nls_cp860+0x0/0x39 @ 1 [ 1.532004] initcall init_nls_cp860+0x0/0x39 returned 0 after 0 usecs [ 1.533004] calling init_nls_cp861+0x0/0x39 @ 1 [ 1.534004] initcall init_nls_cp861+0x0/0x39 returned 0 after 0 usecs [ 1.535004] calling init_nls_cp863+0x0/0x39 @ 1 [ 1.536004] initcall init_nls_cp863+0x0/0x39 returned 0 after 0 usecs [ 1.537004] calling init_nls_cp864+0x0/0x39 @ 1 [ 1.538004] initcall init_nls_cp864+0x0/0x39 returned 0 after 0 usecs [ 1.539004] calling init_nls_cp865+0x0/0x39 @ 1 [ 1.540004] initcall init_nls_cp865+0x0/0x39 returned 0 after 0 usecs [ 1.541004] calling init_nls_cp869+0x0/0x39 @ 1 [ 1.542004] initcall init_nls_cp869+0x0/0x39 returned 0 after 0 usecs [ 1.543004] calling init_nls_cp874+0x0/0x39 @ 1 [ 1.544004] initcall init_nls_cp874+0x0/0x39 returned 0 after 0 usecs [ 1.545004] calling init_nls_cp932+0x0/0x39 @ 1 [ 1.546004] initcall init_nls_cp932+0x0/0x39 returned 0 after 0 usecs [ 1.547004] calling init_nls_euc_jp+0x0/0x6f @ 1 [ 1.548005] initcall init_nls_euc_jp+0x0/0x6f returned 0 after 0 usecs [ 1.549004] calling init_nls_cp936+0x0/0x39 @ 1 [ 1.550004] initcall init_nls_cp936+0x0/0x39 returned 0 after 0 usecs [ 1.551004] calling init_nls_cp949+0x0/0x39 @ 1 [ 1.552004] initcall init_nls_cp949+0x0/0x39 returned 0 after 0 usecs [ 1.553004] calling init_nls_cp950+0x0/0x39 @ 1 [ 1.554004] initcall init_nls_cp950+0x0/0x39 returned 0 after 0 usecs [ 1.555004] calling init_nls_iso8859_1+0x0/0x39 @ 1 [ 1.556004] initcall init_nls_iso8859_1+0x0/0x39 returned 0 after 0 usecs [ 1.557004] calling init_nls_iso8859_4+0x0/0x39 @ 1 [ 1.558004] initcall init_nls_iso8859_4+0x0/0x39 returned 0 after 0 usecs [ 1.559004] calling init_nls_iso8859_5+0x0/0x39 @ 1 [ 1.560004] initcall init_nls_iso8859_5+0x0/0x39 returned 0 after 0 usecs [ 1.561004] calling init_nls_iso8859_6+0x0/0x39 @ 1 [ 1.562004] initcall init_nls_iso8859_6+0x0/0x39 returned 0 after 0 usecs [ 1.563004] calling init_nls_koi8_r+0x0/0x39 @ 1 [ 1.564004] initcall init_nls_koi8_r+0x0/0x39 returned 0 after 0 usecs [ 1.565004] calling init_nls_utf8+0x0/0x4a @ 1 [ 1.566005] initcall init_nls_utf8+0x0/0x4a returned 0 after 0 usecs [ 1.567004] calling init_smb_fs+0x0/0x99 @ 1 [ 1.569265] initcall init_smb_fs+0x0/0x99 returned 0 after 976 usecs [ 1.570044] calling init_cifs+0x0/0x345 @ 1 [ 1.574411] initcall init_cifs+0x0/0x345 returned 0 after 2929 usecs [ 1.575005] calling init_ntfs_fs+0x0/0x253 @ 1 [ 1.576011] NTFS driver 2.1.29 [Flags: R/W DEBUG]. [ 1.579307] initcall init_ntfs_fs+0x0/0x253 returned 0 after 2929 usecs [ 1.580005] calling init_autofs_fs+0x0/0x39 @ 1 [ 1.581007] initcall init_autofs_fs+0x0/0x39 returned 0 after 0 usecs [ 1.582004] calling init_autofs4_fs+0x0/0x4c @ 1 [ 1.583008] initcall init_autofs4_fs+0x0/0x4c returned -16 after 0 usecs [ 1.584005] initcall init_autofs4_fs+0x0/0x4c returned with error code -16 [ 1.585004] calling fuse_init+0x0/0x15c @ 1 [ 1.586003] fuse init (API version 7.11) [ 1.588305] initcall fuse_init+0x0/0x15c returned 0 after 1953 usecs [ 1.589023] calling init_xfs_fs+0x0/0xcd @ 1 [ 1.590003] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 1.598189] SGI XFS Quota Management subsystem [ 1.599048] initcall init_xfs_fs+0x0/0xcd returned 0 after 8789 usecs [ 1.600004] calling ocfs2_init+0x0/0x352 @ 1 [ 1.601003] OCFS2 1.5.0 [ 1.604384] initcall ocfs2_init+0x0/0x352 returned 0 after 2929 usecs [ 1.605006] calling ocfs2_stack_glue_init+0x0/0xbb @ 1 [ 1.606046] initcall ocfs2_stack_glue_init+0x0/0xbb returned 0 after 0 usecs [ 1.607004] calling o2cb_stack_init+0x0/0x39 @ 1 [ 1.608003] ocfs2: Registered cluster interface o2cb [ 1.609005] initcall o2cb_stack_init+0x0/0x39 returned 0 after 976 usecs [ 1.610004] calling ocfs2_user_plugin_init+0x0/0x7c @ 1 [ 1.612215] ocfs2: Registered cluster interface user [ 1.613026] initcall ocfs2_user_plugin_init+0x0/0x7c returned 0 after 1953 usecs [ 1.614004] calling init_o2nm+0x0/0xcf @ 1 [ 1.615003] OCFS2 Node Manager 1.5.0 [ 1.618069] initcall init_o2nm+0x0/0xcf returned 0 after 2929 usecs [ 1.619004] calling dlm_init+0x0/0x356 @ 1 [ 1.620003] OCFS2 DLM 1.5.0 [ 1.623051] initcall dlm_init+0x0/0x356 returned 0 after 2929 usecs [ 1.624004] calling init_dlmfs_fs+0x0/0x106 @ 1 [ 1.625003] OCFS2 DLMFS 1.5.0 [ 1.627275] OCFS2 User DLM kernel interface loaded [ 1.628006] initcall init_dlmfs_fs+0x0/0x106 returned 0 after 2929 usecs [ 1.629004] calling init_btrfs_fs+0x0/0xb5 @ 1 [ 1.633297] Btrfs loaded [ 1.634006] initcall init_btrfs_fs+0x0/0xb5 returned 0 after 3906 usecs [ 1.635004] calling init_gfs2_fs+0x0/0x1f3 @ 1 [ 1.638290] GFS2 (built Jun 7 2009 11:52:22) installed [ 1.639009] initcall init_gfs2_fs+0x0/0x1f3 returned 0 after 2929 usecs [ 1.640079] calling ipc_init+0x0/0x56 @ 1 [ 1.641024] msgmni has been set to 1778 [ 1.642023] initcall ipc_init+0x0/0x56 returned 0 after 976 usecs [ 1.643004] calling ipc_sysctl_init+0x0/0x3b @ 1 [ 1.644013] initcall ipc_sysctl_init+0x0/0x3b returned 0 after 0 usecs [ 1.645004] calling key_proc_init+0x0/0x5a @ 1 [ 1.646013] initcall key_proc_init+0x0/0x5a returned 0 after 0 usecs [ 1.647004] calling crypto_wq_init+0x0/0x59 @ 1 [ 1.648068] initcall crypto_wq_init+0x0/0x59 returned 0 after 0 usecs [ 1.649005] calling crypto_algapi_init+0x0/0x34 @ 1 [ 1.650095] initcall crypto_algapi_init+0x0/0x34 returned 0 after 0 usecs [ 1.651005] calling chainiv_module_init+0x0/0x39 @ 1 [ 1.652008] initcall chainiv_module_init+0x0/0x39 returned 0 after 0 usecs [ 1.653004] calling eseqiv_module_init+0x0/0x39 @ 1 [ 1.654006] initcall eseqiv_module_init+0x0/0x39 returned 0 after 0 usecs [ 1.655004] calling seqiv_module_init+0x0/0x39 @ 1 [ 1.656006] initcall seqiv_module_init+0x0/0x39 returned 0 after 0 usecs [ 1.657004] calling hmac_module_init+0x0/0x39 @ 1 [ 1.658006] initcall hmac_module_init+0x0/0x39 returned 0 after 0 usecs [ 1.659004] calling crypto_xcbc_module_init+0x0/0x39 @ 1 [ 1.660006] initcall crypto_xcbc_module_init+0x0/0x39 returned 0 after 0 usecs [ 1.661004] calling crypto_null_mod_init+0x0/0xa5 @ 1 [ 1.662059] alg: No test for cipher_null (cipher_null-generic) [ 1.668481] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 1.669094] alg: No test for digest_null (digest_null-generic) [ 1.675427] alg: No test for compress_null (compress_null-generic) [ 1.676032] initcall crypto_null_mod_init+0x0/0xa5 returned 0 after 13671 usecs [ 1.677005] calling md4_mod_init+0x0/0x39 @ 1 [ 1.678085] initcall md4_mod_init+0x0/0x39 returned 0 after 0 usecs [ 1.679005] calling md5_mod_init+0x0/0x39 @ 1 [ 1.680057] initcall md5_mod_init+0x0/0x39 returned 0 after 0 usecs [ 1.681005] calling rmd128_mod_init+0x0/0x39 @ 1 [ 1.682067] initcall rmd128_mod_init+0x0/0x39 returned 0 after 0 usecs [ 1.683005] calling rmd160_mod_init+0x0/0x39 @ 1 [ 1.684061] initcall rmd160_mod_init+0x0/0x39 returned 0 after 0 usecs [ 1.685005] calling rmd320_mod_init+0x0/0x39 @ 1 [ 1.686061] initcall rmd320_mod_init+0x0/0x39 returned 0 after 0 usecs [ 1.687005] calling sha1_generic_mod_init+0x0/0x39 @ 1 [ 1.688060] initcall sha1_generic_mod_init+0x0/0x39 returned 0 after 0 usecs [ 1.689005] calling sha256_generic_mod_init+0x0/0x65 @ 1 [ 1.690061] initcall sha256_generic_mod_init+0x0/0x65 returned 0 after 0 usecs [ 1.691005] calling wp512_mod_init+0x0/0x8a @ 1 [ 1.692100] initcall wp512_mod_init+0x0/0x8a returned 0 after 0 usecs [ 1.693005] calling tgr192_mod_init+0x0/0x8a @ 1 [ 1.694060] initcall tgr192_mod_init+0x0/0x8a returned 0 after 0 usecs [ 1.695005] calling crypto_ecb_module_init+0x0/0x39 @ 1 [ 1.696006] initcall crypto_ecb_module_init+0x0/0x39 returned 0 after 0 usecs [ 1.697004] calling crypto_cbc_module_init+0x0/0x39 @ 1 [ 1.698006] initcall crypto_cbc_module_init+0x0/0x39 returned 0 after 0 usecs [ 1.699004] calling crypto_pcbc_module_init+0x0/0x39 @ 1 [ 1.700006] initcall crypto_pcbc_module_init+0x0/0x39 returned 0 after 0 usecs [ 1.701004] calling crypto_cts_module_init+0x0/0x39 @ 1 [ 1.702006] initcall crypto_cts_module_init+0x0/0x39 returned 0 after 0 usecs [ 1.703004] calling crypto_module_init+0x0/0x39 @ 1 [ 1.704006] initcall crypto_module_init+0x0/0x39 returned 0 after 0 usecs [ 1.705004] calling crypto_module_init+0x0/0x39 @ 1 [ 1.706006] initcall crypto_module_init+0x0/0x39 returned 0 after 0 usecs [ 1.707004] calling crypto_ctr_module_init+0x0/0x69 @ 1 [ 1.708007] initcall crypto_ctr_module_init+0x0/0x69 returned 0 after 0 usecs [ 1.709004] calling crypto_gcm_module_init+0x0/0x87 @ 1 [ 1.710008] initcall crypto_gcm_module_init+0x0/0x87 returned 0 after 0 usecs [ 1.711004] calling crypto_ccm_module_init+0x0/0x87 @ 1 [ 1.712008] initcall crypto_ccm_module_init+0x0/0x87 returned 0 after 0 usecs [ 1.713004] calling cryptd_init+0x0/0x109 @ 1 [ 1.714010] initcall cryptd_init+0x0/0x109 returned 0 after 0 usecs [ 1.715004] calling des_generic_mod_init+0x0/0x65 @ 1 [ 1.716098] initcall des_generic_mod_init+0x0/0x65 returned 0 after 0 usecs [ 1.717005] calling fcrypt_mod_init+0x0/0x39 @ 1 [ 1.718059] alg: No test for fcrypt (fcrypt-generic) [ 1.723606] initcall fcrypt_mod_init+0x0/0x39 returned 0 after 4882 usecs [ 1.724004] calling blowfish_mod_init+0x0/0x39 @ 1 [ 1.726255] initcall blowfish_mod_init+0x0/0x39 returned 0 after 976 usecs [ 1.727004] calling twofish_mod_init+0x0/0x39 @ 1 [ 1.729180] initcall twofish_mod_init+0x0/0x39 returned 0 after 976 usecs [ 1.730004] calling aes_init+0x0/0x39 @ 1 [ 1.731059] initcall aes_init+0x0/0x39 returned 0 after 0 usecs [ 1.732008] calling camellia_init+0x0/0x39 @ 1 [ 1.733059] initcall camellia_init+0x0/0x39 returned 0 after 0 usecs [ 1.734005] calling cast5_mod_init+0x0/0x39 @ 1 [ 1.735059] initcall cast5_mod_init+0x0/0x39 returned 0 after 0 usecs [ 1.736005] calling cast6_mod_init+0x0/0x39 @ 1 [ 1.738070] initcall cast6_mod_init+0x0/0x39 returned 0 after 976 usecs [ 1.739004] calling arc4_init+0x0/0x39 @ 1 [ 1.741012] initcall arc4_init+0x0/0x39 returned 0 after 976 usecs [ 1.742004] calling khazad_mod_init+0x0/0x39 @ 1 [ 1.744062] initcall khazad_mod_init+0x0/0x39 returned 0 after 976 usecs [ 1.745004] calling anubis_mod_init+0x0/0x39 @ 1 [ 1.746081] initcall anubis_mod_init+0x0/0x39 returned 0 after 0 usecs [ 1.747005] calling salsa20_generic_mod_init+0x0/0x39 @ 1 [ 1.748060] initcall salsa20_generic_mod_init+0x0/0x39 returned 0 after 0 usecs [ 1.749005] calling deflate_mod_init+0x0/0x39 @ 1 [ 1.751616] initcall deflate_mod_init+0x0/0x39 returned 0 after 976 usecs [ 1.752004] calling michael_mic_init+0x0/0x39 @ 1 [ 1.753060] initcall michael_mic_init+0x0/0x39 returned 0 after 0 usecs [ 1.754005] calling crc32c_mod_init+0x0/0x39 @ 1 [ 1.755058] initcall crc32c_mod_init+0x0/0x39 returned 0 after 0 usecs [ 1.756005] calling crypto_authenc_module_init+0x0/0x39 @ 1 [ 1.757006] initcall crypto_authenc_module_init+0x0/0x39 returned 0 after 0 usecs [ 1.758004] calling lzo_mod_init+0x0/0x39 @ 1 [ 1.760124] initcall lzo_mod_init+0x0/0x39 returned 0 after 976 usecs [ 1.761004] calling krng_mod_init+0x0/0x39 @ 1 [ 1.762059] alg: No test for stdrng (krng) [ 1.766295] initcall krng_mod_init+0x0/0x39 returned 0 after 3906 usecs [ 1.767004] calling prng_mod_init+0x0/0x4e @ 1 [ 1.768061] alg: No test for stdrng (ansi_cprng) [ 1.773167] initcall prng_mod_init+0x0/0x4e returned 0 after 4882 usecs [ 1.774004] calling proc_genhd_init+0x0/0x63 @ 1 [ 1.775024] initcall proc_genhd_init+0x0/0x63 returned 0 after 0 usecs [ 1.776004] calling bsg_init+0x0/0x14d @ 1 [ 1.777334] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 1.778006] initcall bsg_init+0x0/0x14d returned 0 after 976 usecs [ 1.779004] calling noop_init+0x0/0x3b @ 1 [ 1.780039] io scheduler noop registered [ 1.781005] initcall noop_init+0x0/0x3b returned 0 after 976 usecs [ 1.782004] calling deadline_init+0x0/0x3b @ 1 [ 1.783003] io scheduler deadline registered (default) [ 1.784004] initcall deadline_init+0x0/0x3b returned 0 after 976 usecs [ 1.785004] calling cfq_init+0x0/0xbb @ 1 [ 1.786268] io scheduler cfq registered [ 1.787006] initcall cfq_init+0x0/0xbb returned 0 after 976 usecs [ 1.788005] calling debug_objects_init_debugfs+0x0/0x8a @ 1 [ 1.789029] initcall debug_objects_init_debugfs+0x0/0x8a returned 0 after 0 usecs [ 1.790004] calling libcrc32c_mod_init+0x0/0x53 @ 1 [ 1.791010] initcall libcrc32c_mod_init+0x0/0x53 returned 0 after 0 usecs [ 1.792003] calling init_kmp+0x0/0x39 @ 1 [ 1.793014] initcall init_kmp+0x0/0x39 returned 0 after 0 usecs [ 1.794003] calling init_bm+0x0/0x39 @ 1 [ 1.795004] initcall init_bm+0x0/0x39 returned 0 after 0 usecs [ 1.796003] calling init_fsm+0x0/0x39 @ 1 [ 1.797004] initcall init_fsm+0x0/0x39 returned 0 after 0 usecs [ 1.798003] calling percpu_counter_startup+0x0/0x40 @ 1 [ 1.799007] initcall percpu_counter_startup+0x0/0x40 returned 0 after 0 usecs [ 1.800006] calling bt8xxgpio_init+0x0/0x42 @ 1 [ 1.801085] initcall bt8xxgpio_init+0x0/0x42 returned 0 after 0 usecs [ 1.802007] calling pci_init+0x0/0x5b @ 1 [ 1.814130] pci 0000:01:00.0: Boot video device [ 1.815015] initcall pci_init+0x0/0x5b returned 0 after 11718 usecs [ 1.816004] calling pci_proc_init+0x0/0x90 @ 1 [ 1.817313] initcall pci_proc_init+0x0/0x90 returned 0 after 0 usecs [ 1.818004] calling pci_stub_init+0x0/0x42 @ 1 [ 1.819077] initcall pci_stub_init+0x0/0x42 returned 0 after 0 usecs [ 1.820004] calling ltv350qv_init+0x0/0x39 @ 1 [ 1.821067] initcall ltv350qv_init+0x0/0x39 returned 0 after 0 usecs [ 1.822005] calling platform_lcd_init+0x0/0x39 @ 1 [ 1.823077] initcall platform_lcd_init+0x0/0x39 returned 0 after 0 usecs [ 1.824005] calling tdo24m_init+0x0/0x39 @ 1 [ 1.825075] initcall tdo24m_init+0x0/0x39 returned 0 after 0 usecs [ 1.826005] calling genericbl_init+0x0/0x39 @ 1 [ 1.827064] initcall genericbl_init+0x0/0x39 returned 0 after 0 usecs [ 1.828005] calling mbp_init+0x0/0x120 @ 1 [ 1.829006] initcall mbp_init+0x0/0x120 returned -19 after 0 usecs [ 1.830004] calling kb3886_init+0x0/0x63 @ 1 [ 1.831005] initcall kb3886_init+0x0/0x63 returned -19 after 0 usecs [ 1.832004] calling xenfs_init+0x0/0x54 @ 1 [ 1.833003] XENFS: not registering filesystem on non-xen platform [ 1.834004] initcall xenfs_init+0x0/0x54 returned 0 after 976 usecs [ 1.835004] calling regulator_fixed_voltage_init+0x0/0x39 @ 1 [ 1.836065] initcall regulator_fixed_voltage_init+0x0/0x39 returned 0 after 0 usecs [ 1.837005] calling regulator_virtual_consumer_init+0x0/0x39 @ 1 [ 1.838064] initcall regulator_virtual_consumer_init+0x0/0x39 returned 0 after 0 usecs [ 1.839005] calling bq24022_init+0x0/0x40 @ 1 [ 1.840113] initcall bq24022_init+0x0/0x40 returned -19 after 0 usecs [ 1.841005] calling pcf50633_regulator_init+0x0/0x39 @ 1 [ 1.842064] initcall pcf50633_regulator_init+0x0/0x39 returned 0 after 0 usecs [ 1.843006] calling rand_initialize+0x0/0x53 @ 1 [ 1.844033] initcall rand_initialize+0x0/0x53 returned 0 after 0 usecs [ 1.845004] calling tty_init+0x0/0x11c @ 1 [ 1.862310] initcall tty_init+0x0/0x11c returned 0 after 15625 usecs [ 1.863006] calling pty_init+0x0/0x39 @ 1 [ 2.002106] initcall pty_init+0x0/0x39 returned 0 after 134765 usecs [ 2.003005] calling sysrq_init+0x0/0x4c @ 1 [ 2.004023] initcall sysrq_init+0x0/0x4c returned 0 after 0 usecs [ 2.005004] calling epca_module_init+0x0/0x32 @ 1 [ 2.006022] DIGI epca driver version 1.3.0.1-LK2.6 loaded. [ 2.189051] initcall epca_module_init+0x0/0x32 returned 0 after 178711 usecs [ 2.190006] calling specialix_init_module+0x0/0xc4 @ 1 [ 2.191059] sx: Specialix IO8+ driver v1.11, (c) R.E.Wolff 1997/1998. [ 2.192003] sx: derived from work (c) D.Gorodchanin 1994-1996. [ 2.193003] sx: DTR/RTS pin is always RTS. [ 2.223337] sx0: specialix IO8+ Board at 0x100 not found. [ 2.224019] sx1: specialix IO8+ Board at 0x180 not found. [ 2.225164] sx2: specialix IO8+ Board at 0x250 not found. [ 2.226013] sx3: specialix IO8+ Board at 0x260 not found. [ 2.278788] sx: No specialix IO8+ boards detected. [ 2.279011] initcall specialix_init_module+0x0/0xc4 returned -5 after 85937 usecs [ 2.280005] initcall specialix_init_module+0x0/0xc4 returned with error code -5 [ 2.281005] calling moxa_init+0x0/0x14c @ 1 [ 2.282003] MOXA Intellio family driver version 6.0k [ 2.344244] initcall moxa_init+0x0/0x14c returned 0 after 60546 usecs [ 2.345006] calling ip2_loadmain+0x0/0x9db @ 1 [ 2.346036] Computone IntelliPort Plus multiport driver version 1.2.14 [ 2.347126] initcall ip2_loadmain+0x0/0x9db returned 0 after 976 usecs [ 2.348005] calling riscom8_init_module+0x0/0xb1 @ 1 [ 2.350030] rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin 1994-1996. [ 2.367368] rc0: RISCom/8 Board at 0x220 not found. [ 2.368046] rc1: RISCom/8 Board at 0x240 not found. [ 2.369036] rc2: RISCom/8 Board at 0x250 not found. [ 2.370036] rc3: RISCom/8 Board at 0x260 not found. [ 2.399691] rc: No RISCom/8 boards detected. [ 2.400021] initcall riscom8_init_module+0x0/0xb1 returned -5 after 48828 usecs [ 2.401005] initcall riscom8_init_module+0x0/0xb1 returned with error code -5 [ 2.402004] calling synclink_init+0x0/0x160 @ 1 [ 2.403003] SyncLink serial driver $Revision: 4.38 $ [ 2.467406] SyncLink serial driver $Revision: 4.38 $, tty major#253 [ 2.468011] initcall synclink_init+0x0/0x160 returned 0 after 63476 usecs [ 2.469008] calling synclinkmp_init+0x0/0x1b7 @ 1 [ 2.470004] SyncLink MultiPort driver $Revision: 4.38 $ [ 2.543524] SyncLink MultiPort driver $Revision: 4.38 $, tty major#252 [ 2.544010] initcall synclinkmp_init+0x0/0x1b7 returned 0 after 72265 usecs [ 2.545041] calling slgt_init+0x0/0x1e7 @ 1 [ 2.546003] SyncLink GT [ 2.547034] SyncLink GT, tty major#251 [ 2.548086] SyncLink GT no devices found [ 2.549009] initcall slgt_init+0x0/0x1e7 returned 0 after 2929 usecs [ 2.550032] calling sx_init+0x0/0x10e @ 1 [ 2.551185] initcall sx_init+0x0/0x10e returned 0 after 0 usecs [ 2.552006] calling raw_init+0x0/0x103 @ 1 [ 2.554395] initcall raw_init+0x0/0x103 returned 0 after 976 usecs [ 2.555013] calling lp_init_module+0x0/0xec @ 1 [ 2.556093] lp: driver loaded but no devices found [ 2.557006] initcall lp_init_module+0x0/0xec returned 0 after 976 usecs [ 2.558007] calling applicom_init+0x0/0x4e9 @ 1 [ 2.559004] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 2.560016] ac.o: No PCI boards found. [ 2.561003] ac.o: For an ISA board you must supply memory and irq parameters. [ 2.562005] initcall applicom_init+0x0/0x4e9 returned -6 after 2929 usecs [ 2.563005] initcall applicom_init+0x0/0x4e9 returned with error code -6 [ 2.564004] calling rtc_generic_init+0x0/0x8a @ 1 [ 2.565004] Generic RTC Driver v1.07 [ 2.566247] initcall rtc_generic_init+0x0/0x8a returned 0 after 976 usecs [ 2.567007] calling i8k_init+0x0/0x78 @ 1 [ 2.568076] initcall i8k_init+0x0/0x78 returned -19 after 0 usecs [ 2.569004] calling mod_init+0x0/0x201 @ 1 [ 2.570284] initcall mod_init+0x0/0x201 returned -19 after 0 usecs [ 2.571004] calling mod_init+0x0/0xdf @ 1 [ 2.572103] initcall mod_init+0x0/0xdf returned -19 after 0 usecs [ 2.573005] calling pc8736x_gpio_init+0x0/0x3e4 @ 1 [ 2.575107] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing [ 2.576012] platform pc8736x_gpio.0: no device found [ 2.577120] initcall pc8736x_gpio_init+0x0/0x3e4 returned -19 after 2929 usecs [ 2.578006] calling nsc_gpio_init+0x0/0x3b @ 1 [ 2.579030] nsc_gpio initializing [ 2.580005] initcall nsc_gpio_init+0x0/0x3b returned 0 after 976 usecs [ 2.581004] calling tlclk_init+0x0/0x1eb @ 1 [ 2.582014] telclk_interrup = 0xf non-mcpbl0010 hw. [ 2.583017] initcall tlclk_init+0x0/0x1eb returned -6 after 976 usecs [ 2.584005] initcall tlclk_init+0x0/0x1eb returned with error code -6 [ 2.585005] calling mwave_init+0x0/0x2ca @ 1 [ 2.586010] smapi::smapi_init, ERROR invalid usSmapiID [ 2.587003] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 2.588003] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 2.589006] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 2.590005] initcall mwave_init+0x0/0x2ca returned -5 after 3906 usecs [ 2.591005] initcall mwave_init+0x0/0x2ca returned with error code -5 [ 2.592004] calling agp_init+0x0/0x4b @ 1 [ 2.593003] Linux agpgart interface v0.103 [ 2.594005] initcall agp_init+0x0/0x4b returned 0 after 976 usecs [ 2.595004] calling agp_intel_init+0x0/0x50 @ 1 [ 2.596084] initcall agp_intel_init+0x0/0x50 returned 0 after 0 usecs [ 2.597005] calling agp_sis_init+0x0/0x50 @ 1 [ 2.598093] initcall agp_sis_init+0x0/0x50 returned 0 after 0 usecs [ 2.599005] calling agp_via_init+0x0/0x50 @ 1 [ 2.600085] initcall agp_via_init+0x0/0x50 returned 0 after 0 usecs [ 2.601006] calling ipmi_init_msghandler_mod+0x0/0x34 @ 1 [ 2.602081] ipmi message handler version 39.2 [ 2.603021] initcall ipmi_init_msghandler_mod+0x0/0x34 returned 0 after 976 usecs [ 2.604005] calling init_ipmi_devintf+0x0/0x120 @ 1 [ 2.605003] ipmi device interface [ 2.606063] initcall init_ipmi_devintf+0x0/0x120 returned 0 after 976 usecs [ 2.607007] calling init_ipmi_si+0x0/0x283 @ 1 [ 2.608078] IPMI System Interface driver. [ 2.622177] ipmi_si: Unable to find any System Interface(s) [ 2.623007] initcall init_ipmi_si+0x0/0x283 returned -19 after 14648 usecs [ 2.624007] calling ipmi_poweroff_init+0x0/0xb4 @ 1 [ 2.625004] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 2.626015] initcall ipmi_poweroff_init+0x0/0xb4 returned 0 after 976 usecs [ 2.627005] calling hangcheck_init+0x0/0xbf @ 1 [ 2.628004] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 2.629005] Hangcheck: Using get_cycles(). [ 2.630009] initcall hangcheck_init+0x0/0xbf returned 0 after 1953 usecs [ 2.631005] calling init_nsc+0x0/0x1fb @ 1 [ 2.632016] initcall init_nsc+0x0/0x1fb returned -19 after 0 usecs [ 2.633005] calling init_atmel+0x0/0x1af @ 1 [ 2.634114] initcall init_atmel+0x0/0x1af returned -19 after 0 usecs [ 2.635006] calling serial8250_init+0x0/0x16e @ 1 [ 2.636045] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.637124] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.641406] initcall serial8250_init+0x0/0x16e returned 0 after 4882 usecs [ 2.642007] calling serial8250_pci_init+0x0/0x42 @ 1 [ 2.643122] initcall serial8250_pci_init+0x0/0x42 returned 0 after 0 usecs [ 2.644006] calling jsm_init_module+0x0/0x6e @ 1 [ 2.645198] initcall jsm_init_module+0x0/0x6e returned 0 after 0 usecs [ 2.646006] calling init_kgdboc+0x0/0x3b @ 1 [ 2.647007] initcall init_kgdboc+0x0/0x3b returned 0 after 0 usecs [ 2.648005] calling parport_default_proc_register+0x0/0x42 @ 1 [ 2.649013] initcall parport_default_proc_register+0x0/0x42 returned 0 after 0 usecs [ 2.650005] calling parport_pc_init+0x0/0xd2 @ 1 [ 2.652187] parport0: PC-style at 0x378 (0x778)async_waiting @ 1 [ 2.654014] async_continuing @ 1 after 0 usec [ 2.783012] [PCSPP(,...)] [ 2.785287] parport0: irq 7 detected [ 2.786432] lp0: using parport0 (polling). [ 2.787007] lp0: console ready [ 2.788175] initcall parport_pc_init+0x0/0xd2 returned 0 after 133789 usecs [ 2.789010] calling parport_serial_init+0x0/0x42 @ 1 [ 2.791190] initcall parport_serial_init+0x0/0x42 returned 0 after 976 usecs [ 2.792005] calling parport_ax88796_init+0x0/0x39 @ 1 [ 2.793069] initcall parport_ax88796_init+0x0/0x39 returned 0 after 0 usecs [ 2.794006] calling topology_sysfs_init+0x0/0x89 @ 1 [ 2.795054] initcall topology_sysfs_init+0x0/0x89 returned 0 after 0 usecs [ 2.796006] calling floppy_init+0x0/0x59a @ 1 [ 2.798219] Floppy drive(s): fd0 is 1.44M [ 2.813589] FDC 0 is a post-1991 82077 [ 2.815287] initcall floppy_init+0x0/0x59a returned 0 after 17578 usecs [ 2.816007] calling loop_init+0x0/0x1bc @ 1 [ 2.822202] loop: module loaded [ 2.823008] initcall loop_init+0x0/0x1bc returned 0 after 5859 usecs [ 2.824115] calling cpqarray_init+0x0/0x92 @ 1 [ 2.825004] Compaq SMART2 Driver (v 2.6.0) [ 2.826119] initcall cpqarray_init+0x0/0x92 returned -19 after 976 usecs [ 2.827008] calling DAC960_init_module+0x0/0x73 @ 1 [ 2.829373] initcall DAC960_init_module+0x0/0x73 returned 0 after 976 usecs [ 2.830038] calling pkt_init+0x0/0x1fb @ 1 [ 2.832258] initcall pkt_init+0x0/0x1fb returned 0 after 976 usecs [ 2.833032] calling nbd_init+0x0/0x304 @ 1 [ 2.835648] nbd: registered device at major 43 [ 2.845242] initcall nbd_init+0x0/0x304 returned 0 after 10742 usecs [ 2.846142] calling init_cryptoloop+0x0/0x55 @ 1 [ 2.847006] initcall init_cryptoloop+0x0/0x55 returned 0 after 0 usecs [ 2.848005] calling carm_init+0x0/0x42 @ 1 [ 2.849099] initcall carm_init+0x0/0x42 returned 0 after 0 usecs [ 2.850006] calling xlblk_init+0x0/0xa1 @ 1 [ 2.851129] initcall xlblk_init+0x0/0xa1 returned -19 after 0 usecs [ 2.852005] calling pasic3_base_init+0x0/0x40 @ 1 [ 2.854294] initcall pasic3_base_init+0x0/0x40 returned -19 after 976 usecs [ 2.855022] calling wm8400_module_init+0x0/0x59 @ 1 [ 2.856087] i2c-core: driver [WM8400] registered [ 2.857008] initcall wm8400_module_init+0x0/0x59 returned 0 after 976 usecs [ 2.858047] calling pcf50633_init+0x0/0x3b @ 1 [ 2.859064] i2c-core: driver [pcf50633] registered [ 2.860007] initcall pcf50633_init+0x0/0x3b returned 0 after 976 usecs [ 2.861063] calling scsi_tgt_init+0x0/0xb1 @ 1 [ 2.864019] initcall scsi_tgt_init+0x0/0xb1 returned 0 after 1953 usecs [ 2.865014] calling raid_init+0x0/0x39 @ 1 [ 2.867095] initcall raid_init+0x0/0x39 returned 0 after 976 usecs [ 2.868020] calling spi_transport_init+0x0/0x55 @ 1 [ 2.869118] initcall spi_transport_init+0x0/0x55 returned 0 after 0 usecs [ 2.870006] calling fc_transport_init+0x0/0x73 @ 1 [ 2.872172] initcall fc_transport_init+0x0/0x73 returned 0 after 976 usecs [ 2.873009] calling iscsi_transport_init+0x0/0x173 @ 1 [ 2.874004] Loading iSCSI transport class v2.0-870. [ 2.876310] initcall iscsi_transport_init+0x0/0x173 returned 0 after 1953 usecs [ 2.877006] calling sas_transport_init+0x0/0xe1 @ 1 [ 2.879254] initcall sas_transport_init+0x0/0xe1 returned 0 after 976 usecs [ 2.880006] calling scsi_dh_init+0x0/0x65 @ 1 [ 2.881007] initcall scsi_dh_init+0x0/0x65 returned 0 after 0 usecs [ 2.882005] calling rdac_init+0x0/0x55 @ 1 [ 2.883017] rdac: device handler registered [ 2.884006] initcall rdac_init+0x0/0x55 returned 0 after 976 usecs [ 2.885005] calling clariion_init+0x0/0x5c @ 1 [ 2.886005] emc: device handler registered [ 2.887005] initcall clariion_init+0x0/0x5c returned 0 after 976 usecs [ 2.888005] calling alua_init+0x0/0x5c @ 1 [ 2.889005] alua: device handler registered [ 2.890006] initcall alua_init+0x0/0x5c returned 0 after 976 usecs [ 2.891005] calling ahc_linux_init+0x0/0x8d @ 1 [ 2.892106] initcall ahc_linux_init+0x0/0x8d returned 0 after 0 usecs [ 2.893006] calling init_st+0x0/0x129 @ 1 [ 2.894038] st: Version 20081215, fixed bufsize 32768, s/g segs 256 [ 2.895061] Driver 'st' needs updating - please use bus_type methods [ 2.896064] initcall init_st+0x0/0x129 returned 0 after 1953 usecs [ 2.897005] calling init_sd+0x0/0x106 @ 1 [ 2.898096] Driver 'sd' needs updating - please use bus_type methods [ 2.899073] initcall init_sd+0x0/0x106 returned 0 after 976 usecs [ 2.900015] calling init_sr+0x0/0x6f @ 1 [ 2.901006] Driver 'sr' needs updating - please use bus_type methods [ 2.903010] initcall init_sr+0x0/0x6f returned 0 after 1953 usecs [ 2.904005] calling init_sg+0x0/0x170 @ 1 [ 2.905102] initcall init_sg+0x0/0x170 returned 0 after 0 usecs [ 2.906006] calling init_ch_module+0x0/0xcd @ 1 [ 2.907006] SCSI Media Changer driver v0.25 [ 2.908060] Driver 'ch' needs updating - please use bus_type methods [ 2.910104] initcall init_ch_module+0x0/0xcd returned 0 after 2929 usecs [ 2.911006] calling osd_uld_init+0x0/0xfe @ 1 [ 2.912059] Driver 'osd' needs updating - please use bus_type methods [ 2.914110] osd: LOADED open-osd 0.1.0 [ 2.915006] initcall osd_uld_init+0x0/0xfe returned 0 after 2929 usecs [ 2.916005] calling ahci_init+0x0/0x42 @ 1 [ 2.917087] initcall ahci_init+0x0/0x42 returned 0 after 0 usecs [ 2.918006] calling k2_sata_init+0x0/0x42 @ 1 [ 2.919074] initcall k2_sata_init+0x0/0x42 returned 0 after 0 usecs [ 2.920006] calling piix_init+0x0/0x50 @ 1 [ 2.922171] initcall piix_init+0x0/0x50 returned 0 after 976 usecs [ 2.923006] calling pdc_ata_init+0x0/0x42 @ 1 [ 2.925012] initcall pdc_ata_init+0x0/0x42 returned 0 after 976 usecs [ 2.926005] calling qs_ata_init+0x0/0x42 @ 1 [ 2.928037] initcall qs_ata_init+0x0/0x42 returned 0 after 976 usecs [ 2.929035] calling sil_init+0x0/0x42 @ 1 [ 2.930076] initcall sil_init+0x0/0x42 returned 0 after 0 usecs [ 2.931006] calling pdc_sata_init+0x0/0x42 @ 1 [ 2.932084] initcall pdc_sata_init+0x0/0x42 returned 0 after 0 usecs [ 2.933006] calling nv_init+0x0/0x42 @ 1 [ 2.934082] initcall nv_init+0x0/0x42 returned 0 after 0 usecs [ 2.935006] calling uli_init+0x0/0x42 @ 1 [ 2.937092] initcall uli_init+0x0/0x42 returned 0 after 976 usecs [ 2.938006] calling mv_init+0x0/0x6e @ 1 [ 2.939115] initcall mv_init+0x0/0x6e returned 0 after 0 usecs [ 2.940006] calling adma_ata_init+0x0/0x42 @ 1 [ 2.941087] initcall adma_ata_init+0x0/0x42 returned 0 after 0 usecs [ 2.942006] calling amd_init+0x0/0x42 @ 1 [ 2.943100] pata_amd 0000:00:06.0: version 0.4.1 [ 2.944102] pata_amd 0000:00:06.0: setting latency timer to 64 [ 2.945253] scsi0 : pata_amd [ 2.947446] scsi1 : pata_amd [ 2.949031] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 2.950004] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 3.109294] ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100 [ 3.115005] ata1.00: 488397168 sectors, multi 1: LBA48 [ 3.121026] ata1: nv_mode_filter: 0x3f39f&0x3f07f->0x3f01f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0 [ 3.138221] ata1.00: configured for UDMA/100 [ 3.142761] async_waiting @ 2890 [ 3.143004] async_continuing @ 2890 after 0 usec [ 3.144290] scsi 0:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5 [ 3.146273] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) [ 3.147057] sd 0:0:0:0: [sda] Write Protect is off [ 3.148006] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.149100] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.150402] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 > [ 3.255278] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.257409] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.258293] async_waiting @ 2890 [ 3.259010] async_continuing @ 2890 after 0 usec [ 3.422252] ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66 [ 3.428025] ata2: nv_mode_filter: 0x1f39f&0x707f->0x701f, BIOS=0x7000 (0xc60000c0) ACPI=0x0 [ 3.442196] ata2.01: configured for UDMA/33 [ 3.447067] async_waiting @ 2890 [ 3.448004] async_continuing @ 2890 after 0 usec [ 3.450290] scsi 1:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5 [ 3.456021] sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray [ 3.457007] Uniform CD-ROM driver Revision: 3.20 [ 3.458181] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 3.460206] sr 1:0:1:0: Attached scsi generic sg1 type 5 [ 3.462029] work_for_cpu used greatest stack depth: 3288 bytes left [ 3.463035] initcall amd_init+0x0/0x42 returned 0 after 507812 usecs [ 3.464006] calling atiixp_init+0x0/0x42 @ 1 [ 3.465112] initcall atiixp_init+0x0/0x42 returned 0 after 0 usecs [ 3.466007] calling cmd64x_init+0x0/0x42 @ 1 [ 3.468033] initcall cmd64x_init+0x0/0x42 returned 0 after 976 usecs [ 3.469027] calling cs5530_init+0x0/0x42 @ 1 [ 3.470089] initcall cs5530_init+0x0/0x42 returned 0 after 0 usecs [ 3.471006] calling cy82c693_init+0x0/0x42 @ 1 [ 3.472076] initcall cy82c693_init+0x0/0x42 returned 0 after 0 usecs [ 3.473006] calling efar_init+0x0/0x42 @ 1 [ 3.474080] initcall efar_init+0x0/0x42 returned 0 after 0 usecs [ 3.475006] calling hpt37x_init+0x0/0x42 @ 1 [ 3.476076] initcall hpt37x_init+0x0/0x42 returned 0 after 0 usecs [ 3.477006] calling hpt3x2n_init+0x0/0x42 @ 1 [ 3.479149] initcall hpt3x2n_init+0x0/0x42 returned 0 after 976 usecs [ 3.480006] calling hpt3x3_init+0x0/0x42 @ 1 [ 3.482135] initcall hpt3x3_init+0x0/0x42 returned 0 after 976 usecs [ 3.483006] calling it821x_init+0x0/0x42 @ 1 [ 3.485160] initcall it821x_init+0x0/0x42 returned 0 after 976 usecs [ 3.486006] calling jmicron_init+0x0/0x42 @ 1 [ 3.488144] initcall jmicron_init+0x0/0x42 returned 0 after 976 usecs [ 3.489006] calling ns87410_init+0x0/0x42 @ 1 [ 3.490076] initcall ns87410_init+0x0/0x42 returned 0 after 0 usecs [ 3.491006] calling ns87415_init+0x0/0x42 @ 1 [ 3.493179] initcall ns87415_init+0x0/0x42 returned 0 after 976 usecs [ 3.494006] calling mpiix_init+0x0/0x42 @ 1 [ 3.496187] initcall mpiix_init+0x0/0x42 returned 0 after 976 usecs [ 3.497006] calling oldpiix_init+0x0/0x42 @ 1 [ 3.499101] initcall oldpiix_init+0x0/0x42 returned 0 after 976 usecs [ 3.500006] calling pdc2027x_init+0x0/0x42 @ 1 [ 3.501078] initcall pdc2027x_init+0x0/0x42 returned 0 after 0 usecs [ 3.502006] calling pdc202xx_init+0x0/0x42 @ 1 [ 3.503111] initcall pdc202xx_init+0x0/0x42 returned 0 after 0 usecs [ 3.504007] calling radisys_init+0x0/0x42 @ 1 [ 3.505093] initcall radisys_init+0x0/0x42 returned 0 after 0 usecs [ 3.506007] calling serverworks_init+0x0/0x42 @ 1 [ 3.507082] initcall serverworks_init+0x0/0x42 returned 0 after 0 usecs [ 3.508006] calling sil680_init+0x0/0x42 @ 1 [ 3.509081] initcall sil680_init+0x0/0x42 returned 0 after 0 usecs [ 3.510006] calling via_init+0x0/0x42 @ 1 [ 3.511087] initcall via_init+0x0/0x42 returned 0 after 0 usecs [ 3.512007] calling sl82c105_init+0x0/0x42 @ 1 [ 3.514120] initcall sl82c105_init+0x0/0x42 returned 0 after 976 usecs [ 3.515006] calling sis_init+0x0/0x42 @ 1 [ 3.516077] initcall sis_init+0x0/0x42 returned 0 after 0 usecs [ 3.517006] calling sch_init+0x0/0x42 @ 1 [ 3.518077] initcall sch_init+0x0/0x42 returned 0 after 0 usecs [ 3.519006] calling ata_generic_init+0x0/0x42 @ 1 [ 3.521140] initcall ata_generic_init+0x0/0x42 returned 0 after 976 usecs [ 3.522006] calling e1000_init_module+0x0/0x8f @ 1 [ 3.523004] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4 [ 3.524004] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 3.526007] initcall e1000_init_module+0x0/0x8f returned 0 after 2929 usecs [ 3.527005] calling igb_init_module+0x0/0x7b @ 1 [ 3.528004] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 [ 3.529004] Copyright (c) 2007-2009 Intel Corporation. [ 3.530078] initcall igb_init_module+0x0/0x7b returned 0 after 1953 usecs [ 3.531006] calling ixgbe_init_module+0x0/0x8b @ 1 [ 3.532005] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.8-k2 [ 3.533004] ixgbe: Copyright (c) 1999-2009 Intel Corporation. [ 3.535157] initcall ixgbe_init_module+0x0/0x8b returned 0 after 2929 usecs [ 3.536006] calling ixgb_init_module+0x0/0x71 @ 1 [ 3.537005] Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 3.538004] Copyright (c) 1999-2008 Intel Corporation. [ 3.539098] initcall ixgb_init_module+0x0/0x71 returned 0 after 1953 usecs [ 3.540006] calling ipg_init_module+0x0/0x42 @ 1 [ 3.541090] initcall ipg_init_module+0x0/0x42 returned 0 after 0 usecs [ 3.542006] calling t1_init_module+0x0/0x42 @ 1 [ 3.544118] initcall t1_init_module+0x0/0x42 returned 0 after 976 usecs [ 3.545005] calling cxgb3_init_module+0x0/0x47 @ 1 [ 3.546079] initcall cxgb3_init_module+0x0/0x47 returned 0 after 0 usecs [ 3.547006] calling bonding_init+0x0/0x115 @ 1 [ 3.548012] Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008) [ 3.549007] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. [ 3.551233] initcall bonding_init+0x0/0x115 returned 0 after 2929 usecs [ 3.552007] calling atl1_init_module+0x0/0x42 @ 1 [ 3.554086] initcall atl1_init_module+0x0/0x42 returned 0 after 976 usecs [ 3.555008] calling atl2_init_module+0x0/0x71 @ 1 [ 3.556005] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 3.557004] Copyright (c) 2007 Atheros Corporation. [ 3.559143] initcall atl2_init_module+0x0/0x71 returned 0 after 2929 usecs [ 3.560006] calling atl1e_init_module+0x0/0x42 @ 1 [ 3.562112] initcall atl1e_init_module+0x0/0x42 returned 0 after 976 usecs [ 3.563006] calling enic_init_module+0x0/0x5c @ 1 [ 3.564004] enic: Cisco 10G Ethernet Driver, ver 1.0.0.933 [ 3.565105] initcall enic_init_module+0x0/0x5c returned 0 after 976 usecs [ 3.566006] calling happy_meal_probe+0x0/0x42 @ 1 [ 3.567093] initcall happy_meal_probe+0x0/0x42 returned 0 after 0 usecs [ 3.568006] calling gem_init+0x0/0x42 @ 1 [ 3.569107] initcall gem_init+0x0/0x42 returned 0 after 0 usecs [ 3.570006] calling vortex_init+0x0/0xd8 @ 1 [ 3.571084] initcall vortex_init+0x0/0xd8 returned 0 after 0 usecs [ 3.572006] calling ne2k_pci_init+0x0/0x42 @ 1 [ 3.573091] initcall ne2k_pci_init+0x0/0x42 returned 0 after 0 usecs [ 3.574006] calling e100_init_module+0x0/0x81 @ 1 [ 3.575004] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 3.576004] e100: Copyright(c) 1999-2006 Intel Corporation [ 3.577079] initcall e100_init_module+0x0/0x81 returned 0 after 1953 usecs [ 3.578006] calling tlan_probe+0x0/0x108 @ 1 [ 3.579007] ThunderLAN driver v1.15a [ 3.580077] TLAN: 0 devices installed, PCI: 0 EISA: 0 [ 3.582098] initcall tlan_probe+0x0/0x108 returned -19 after 2929 usecs [ 3.583006] calling epic_init+0x0/0x42 @ 1 [ 3.585143] initcall epic_init+0x0/0x42 returned 0 after 976 usecs [ 3.586005] calling sis190_init_module+0x0/0x42 @ 1 [ 3.587077] initcall sis190_init_module+0x0/0x42 returned 0 after 0 usecs [ 3.588006] calling r6040_init+0x0/0x42 @ 1 [ 3.589089] initcall r6040_init+0x0/0x42 returned 0 after 0 usecs [ 3.590006] calling yellowfin_init+0x0/0x42 @ 1 [ 3.591078] initcall yellowfin_init+0x0/0x42 returned 0 after 0 usecs [ 3.592006] calling ns83820_init+0x0/0x4e @ 1 [ 3.593004] ns83820.c: National Semiconductor DP83820 10/100/1000 driver. [ 3.594077] initcall ns83820_init+0x0/0x4e returned 0 after 976 usecs [ 3.595006] calling tg3_init+0x0/0x42 @ 1 [ 3.596081] initcall tg3_init+0x0/0x42 returned 0 after 0 usecs [ 3.597006] calling bnx2_init+0x0/0x42 @ 1 [ 3.598077] initcall bnx2_init+0x0/0x42 returned 0 after 0 usecs [ 3.599006] calling bnx2x_init+0x0/0x80 @ 1 [ 3.601116] initcall bnx2x_init+0x0/0x80 returned 0 after 976 usecs [ 3.602006] calling starfire_init+0x0/0x42 @ 1 [ 3.603080] initcall starfire_init+0x0/0x42 returned 0 after 0 usecs [ 3.604006] calling davicom_init+0x0/0x83 @ 1 [ 3.605121] initcall davicom_init+0x0/0x83 returned 0 after 0 usecs [ 3.606006] calling cicada_init+0x0/0x65 @ 1 [ 3.607116] initcall cicada_init+0x0/0x65 returned 0 after 0 usecs [ 3.608006] calling lxt_init+0x0/0x65 @ 1 [ 3.610173] initcall lxt_init+0x0/0x65 returned 0 after 0 usecs [ 3.611006] calling smsc_init+0x0/0xbf @ 1 [ 3.613211] initcall smsc_init+0x0/0xbf returned 0 after 976 usecs [ 3.614006] calling broadcom_init+0x0/0x125 @ 1 [ 3.617007] initcall broadcom_init+0x0/0x125 returned 0 after 1953 usecs [ 3.618005] calling ip175c_init+0x0/0x39 @ 1 [ 3.619087] initcall ip175c_init+0x0/0x39 returned 0 after 0 usecs [ 3.620006] calling et1011c_init+0x0/0x39 @ 1 [ 3.622131] initcall et1011c_init+0x0/0x39 returned 0 after 976 usecs [ 3.623006] calling mdio_gpio_init+0x0/0x39 @ 1 [ 3.624260] initcall mdio_gpio_init+0x0/0x39 returned 0 after 0 usecs [ 3.625006] calling ste10Xp_init+0x0/0x49 @ 1 [ 3.626116] initcall ste10Xp_init+0x0/0x49 returned 0 after 0 usecs [ 3.627006] calling hamachi_init+0x0/0x42 @ 1 [ 3.628108] initcall hamachi_init+0x0/0x42 returned 0 after 0 usecs [ 3.629008] calling net_olddevs_init+0x0/0x45 @ 1 [ 3.630022] D-Link DE-620 pocket adapter io 0x378, which is busy. [ 3.632017] initcall net_olddevs_init+0x0/0x45 returned 0 after 1953 usecs [ 3.633005] calling b44_init+0x0/0x89 @ 1 [ 3.634115] initcall b44_init+0x0/0x89 returned 0 after 0 usecs [ 3.635006] calling init_nic+0x0/0x42 @ 1 [ 3.636163] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 3.638035] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:1) [ 3.639010] forcedeth 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 11 [ 3.640007] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 3.641121] nv_probe: set workaround bit for reversed mac addr [ 4.154458] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12 [ 4.155007] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 [ 4.156146] initcall init_nic+0x0/0x42 returned 0 after 507812 usecs [ 4.157007] calling ql3xxx_init_module+0x0/0x42 @ 1 [ 4.159164] initcall ql3xxx_init_module+0x0/0x42 returned 0 after 976 usecs [ 4.160006] calling qlge_init_module+0x0/0x42 @ 1 [ 4.162189] initcall qlge_init_module+0x0/0x42 returned 0 after 976 usecs [ 4.163006] calling ifb_init_module+0x0/0xdd @ 1 [ 4.165386] initcall ifb_init_module+0x0/0xdd returned 0 after 976 usecs [ 4.166011] calling macvlan_init_module+0x0/0x79 @ 1 [ 4.167009] initcall macvlan_init_module+0x0/0x79 returned 0 after 0 usecs [ 4.168006] calling de600_init+0x0/0x48 @ 1 [ 4.169018] DE600: port 0x378 busy [ 4.170013] initcall de600_init+0x0/0x48 returned -16 after 976 usecs [ 4.171006] initcall de600_init+0x0/0x48 returned with error code -16 [ 4.172007] calling dfx_init+0x0/0x42 @ 1 [ 4.173084] initcall dfx_init+0x0/0x42 returned 0 after 0 usecs [ 4.174006] calling cp_init+0x0/0x42 @ 1 [ 4.175096] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 4.176007] 8139cp 0000:05:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 4.177119] initcall cp_init+0x0/0x42 returned 0 after 1953 usecs [ 4.178007] calling rtl8139_init_module+0x0/0x42 @ 1 [ 4.179082] 8139too Fast Ethernet driver 0.9.28 [ 4.180038] 8139too 0000:05:07.0: PCI->APIC IRQ transform: INT A -> IRQ 11 [ 4.182535] eth1: RealTek RTL8139 at 0xffffc90000806000, 00:c0:df:03:68:5d, IRQ 11 [ 4.183006] eth1: Identified 8139 chip type 'RTL-8139B' [ 4.184091] initcall rtl8139_init_module+0x0/0x42 returned 0 after 4882 usecs [ 4.185007] calling sc92031_init+0x0/0x42 @ 1 [ 4.186086] initcall sc92031_init+0x0/0x42 returned 0 after 0 usecs [ 4.187007] calling eql_init_module+0x0/0x89 @ 1 [ 4.188017] Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com) [ 4.189200] initcall eql_init_module+0x0/0x89 returned 0 after 976 usecs [ 4.190006] calling tun_init+0x0/0xb7 @ 1 [ 4.191007] tun: Universal TUN/TAP device driver, 1.6 [ 4.192004] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 4.193286] initcall tun_init+0x0/0xb7 returned 0 after 1953 usecs [ 4.194007] calling veth_init+0x0/0x39 @ 1 [ 4.195010] initcall veth_init+0x0/0x39 returned 0 after 0 usecs [ 4.196006] calling amd8111e_init+0x0/0x42 @ 1 [ 4.198100] initcall amd8111e_init+0x0/0x42 returned 0 after 976 usecs [ 4.199006] calling s2io_starter+0x0/0x42 @ 1 [ 4.200089] initcall s2io_starter+0x0/0x42 returned 0 after 0 usecs [ 4.201007] calling myri10ge_init_module+0x0/0xa5 @ 1 [ 4.202007] myri10ge: Version 1.4.4-1.401 [ 4.203082] initcall myri10ge_init_module+0x0/0xa5 returned 0 after 976 usecs [ 4.204006] calling enc28j60_init+0x0/0x4a @ 1 [ 4.205069] initcall enc28j60_init+0x0/0x4a returned 0 after 0 usecs [ 4.206006] calling dnet_init+0x0/0x39 @ 1 [ 4.207073] initcall dnet_init+0x0/0x39 returned 0 after 0 usecs [ 4.208007] calling ipddp_init_module+0x0/0x48 @ 1 [ 4.209015] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 4.210200] ipddp0: Appletalk-IP Decap. mode by Jay Schulist <jschlst@samba.org> [ 4.211007] initcall ipddp_init_module+0x0/0x48 returned 0 after 1953 usecs [ 4.212006] calling catc_init+0x0/0x5e @ 1 [ 4.214145] usbcore: registered new interface driver catc [ 4.215008] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver [ 4.216006] initcall catc_init+0x0/0x5e returned 0 after 2929 usecs [ 4.217006] calling kaweth_init+0x0/0x42 @ 1 [ 4.218065] usbcore: registered new interface driver kaweth [ 4.219010] initcall kaweth_init+0x0/0x42 returned 0 after 976 usecs [ 4.220006] calling pegasus_init+0x0/0x6d @ 1 [ 4.221005] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 4.222085] usbcore: registered new interface driver pegasus [ 4.223010] initcall pegasus_init+0x0/0x6d returned 0 after 1953 usecs [ 4.224006] calling usb_rtl8150_init+0x0/0x4e @ 1 [ 4.225005] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver [ 4.226065] usbcore: registered new interface driver rtl8150 [ 4.227010] initcall usb_rtl8150_init+0x0/0x4e returned 0 after 1953 usecs [ 4.228006] calling hso_init+0x0/0x1ce @ 1 [ 4.229007] hso: drivers/net/usb/hso.c: 1.2 Option Wireless [ 4.230096] usbcore: registered new interface driver hso [ 4.231010] initcall hso_init+0x0/0x1ce returned 0 after 1953 usecs [ 4.232006] calling asix_init+0x0/0x42 @ 1 [ 4.233065] usbcore: registered new interface driver asix [ 4.234010] initcall asix_init+0x0/0x42 returned 0 after 976 usecs [ 4.235006] calling cdc_init+0x0/0x42 @ 1 [ 4.236065] usbcore: registered new interface driver cdc_ether [ 4.237010] initcall cdc_init+0x0/0x42 returned 0 after 976 usecs [ 4.238006] calling smsc95xx_init+0x0/0x42 @ 1 [ 4.239076] usbcore: registered new interface driver smsc95xx [ 4.240010] initcall smsc95xx_init+0x0/0x42 returned 0 after 976 usecs [ 4.241006] calling net1080_init+0x0/0x42 @ 1 [ 4.242066] usbcore: registered new interface driver net1080 [ 4.243010] initcall net1080_init+0x0/0x42 returned 0 after 976 usecs [ 4.244006] calling plusb_init+0x0/0x42 @ 1 [ 4.245075] usbcore: registered new interface driver plusb [ 4.246010] initcall plusb_init+0x0/0x42 returned 0 after 976 usecs [ 4.247006] calling rndis_init+0x0/0x42 @ 1 [ 4.248066] usbcore: registered new interface driver rndis_host [ 4.249010] initcall rndis_init+0x0/0x42 returned 0 after 976 usecs [ 4.250006] calling cdc_subset_init+0x0/0x42 @ 1 [ 4.251066] usbcore: registered new interface driver cdc_subset [ 4.252010] initcall cdc_subset_init+0x0/0x42 returned 0 after 976 usecs [ 4.253006] calling zaurus_init+0x0/0x42 @ 1 [ 4.254075] usbcore: registered new interface driver zaurus [ 4.255010] initcall zaurus_init+0x0/0x42 returned 0 after 976 usecs [ 4.256006] calling usbnet_init+0x0/0x52 @ 1 [ 4.257012] initcall usbnet_init+0x0/0x52 returned 0 after 0 usecs [ 4.258006] calling ipw2100_init+0x0/0xa8 @ 1 [ 4.259005] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 [ 4.260005] ipw2100: Copyright(c) 2003-2006 Intel Corporation [ 4.262035] initcall ipw2100_init+0x0/0xa8 returned 0 after 2929 usecs [ 4.263007] calling ipw_init+0x0/0xad @ 1 [ 4.264005] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kdmprq [ 4.265004] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 4.267138] initcall ipw_init+0x0/0xad returned 0 after 2929 usecs [ 4.268006] calling ieee80211_init+0x0/0x49 @ 1 [ 4.269006] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 4.270004] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> [ 4.271006] initcall ieee80211_init+0x0/0x49 returned 0 after 1953 usecs [ 4.272006] calling init_orinoco+0x0/0x42 @ 1 [ 4.273005] orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al) [ 4.274006] initcall init_orinoco+0x0/0x42 returned 0 after 976 usecs [ 4.275006] calling orinoco_plx_init+0x0/0x55 @ 1 [ 4.276005] orinoco_plx 0.15 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au>, Daniel Barlow <dan@telent.net>) [ 4.277079] initcall orinoco_plx_init+0x0/0x55 returned 0 after 976 usecs [ 4.278006] calling orinoco_pci_init+0x0/0x55 @ 1 [ 4.279005] orinoco_pci 0.15 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au> & Jean Tourrilhes <jt@hpl.hp.com>) [ 4.280078] initcall orinoco_pci_init+0x0/0x55 returned 0 after 976 usecs [ 4.281007] calling orinoco_nortel_init+0x0/0x55 @ 1 [ 4.282005] orinoco_nortel 0.15 (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>) [ 4.283081] initcall orinoco_nortel_init+0x0/0x55 returned 0 after 976 usecs [ 4.284007] calling airo_init_module+0x0/0x110 @ 1 [ 4.285022] airo(): Probing for PCI adapters [ 4.286079] airo(): Finished probing for PCI adapters [ 4.287007] initcall airo_init_module+0x0/0x110 returned 0 after 1953 usecs [ 4.288006] calling prism54_module_init+0x0/0x5c @ 1 [ 4.289005] Loaded prism54 driver, version 1.2 [ 4.290078] initcall prism54_module_init+0x0/0x5c returned 0 after 976 usecs [ 4.291007] calling hostap_init+0x0/0x6c @ 1 [ 4.292020] initcall hostap_init+0x0/0x6c returned 0 after 0 usecs [ 4.293006] calling init_prism2_pci+0x0/0x42 @ 1 [ 4.295034] initcall init_prism2_pci+0x0/0x42 returned 0 after 976 usecs [ 4.296007] calling rndis_wlan_init+0x0/0x42 @ 1 [ 4.297076] usbcore: registered new interface driver rndis_wlan [ 4.298010] initcall rndis_wlan_init+0x0/0x42 returned 0 after 976 usecs [ 4.299006] calling zd1201_init+0x0/0x42 @ 1 [ 4.300065] usbcore: registered new interface driver zd1201 [ 4.301010] initcall zd1201_init+0x0/0x42 returned 0 after 976 usecs [ 4.302006] calling lbs_init_module+0x0/0xf3 @ 1 [ 4.303027] initcall lbs_init_module+0x0/0xf3 returned 0 after 0 usecs [ 4.304006] calling if_usb_init_module+0x0/0xe2 @ 1 [ 4.305067] usbcore: registered new interface driver usb8xxx [ 4.307008] initcall if_usb_init_module+0x0/0xe2 returned 0 after 1953 usecs [ 4.308006] calling if_sdio_init_module+0x0/0xfd @ 1 [ 4.309006] libertas_sdio: Libertas SDIO driver [ 4.310004] libertas_sdio: Copyright Pierre Ossman [ 4.311076] initcall if_sdio_init_module+0x0/0xfd returned 0 after 1953 usecs [ 4.312007] calling if_spi_init_module+0x0/0xed @ 1 [ 4.313005] libertas_spi: Libertas SPI driver [ 4.314077] initcall if_spi_init_module+0x0/0xed returned 0 after 976 usecs [ 4.315007] calling usb_irda_init+0x0/0x65 @ 1 [ 4.317018] usbcore: registered new interface driver irda-usb [ 4.318047] USB IrDA support registered [ 4.319006] initcall usb_irda_init+0x0/0x65 returned 0 after 2929 usecs [ 4.320006] calling stir_init+0x0/0x42 @ 1 [ 4.321067] usbcore: registered new interface driver stir4200 [ 4.322010] initcall stir_init+0x0/0x42 returned 0 after 976 usecs [ 4.323006] calling nsc_ircc_init+0x0/0x200 @ 1 [ 4.324117] initcall nsc_ircc_init+0x0/0x200 returned -19 after 0 usecs [ 4.325007] calling w83977af_init+0x0/0x74 @ 1 [ 4.326057] initcall w83977af_init+0x0/0x74 returned -19 after 0 usecs [ 4.327006] calling ali_ircc_init+0x0/0x18b @ 1 [ 4.329148] initcall ali_ircc_init+0x0/0x18b returned -19 after 976 usecs [ 4.330007] calling vlsi_mod_init+0x0/0x151 @ 1 [ 4.332107] initcall vlsi_mod_init+0x0/0x151 returned 0 after 976 usecs [ 4.333006] calling irtty_sir_init+0x0/0x65 @ 1 [ 4.334007] initcall irtty_sir_init+0x0/0x65 returned 0 after 0 usecs [ 4.335006] calling sir_wq_init+0x0/0x5c @ 1 [ 4.336081] initcall sir_wq_init+0x0/0x5c returned 0 after 0 usecs [ 4.337007] calling tekram_sir_init+0x0/0x52 @ 1 [ 4.338020] initcall tekram_sir_init+0x0/0x52 returned 0 after 0 usecs [ 4.339006] calling girbil_sir_init+0x0/0x39 @ 1 [ 4.340006] initcall girbil_sir_init+0x0/0x39 returned 0 after 0 usecs [ 4.341006] calling old_belkin_sir_init+0x0/0x39 @ 1 [ 4.342006] initcall old_belkin_sir_init+0x0/0x39 returned 0 after 0 usecs [ 4.343006] calling toim3232_sir_init+0x0/0x52 @ 1 [ 4.344006] initcall toim3232_sir_init+0x0/0x52 returned 0 after 0 usecs [ 4.345006] calling ksdazzle_init+0x0/0x42 @ 1 [ 4.347168] usbcore: registered new interface driver ksdazzle-sir [ 4.348010] initcall ksdazzle_init+0x0/0x42 returned 0 after 1953 usecs [ 4.349008] calling init_netconsole+0x0/0x13f @ 1 [ 4.350009] console [netcon0] enabled [ 4.351005] netconsole: network logging started [ 4.352006] initcall init_netconsole+0x0/0x13f returned 0 after 1953 usecs [ 4.353006] calling niu_init+0x0/0x64 @ 1 [ 4.355081] initcall niu_init+0x0/0x64 returned 0 after 976 usecs [ 4.356006] calling efx_init_module+0x0/0xfd @ 1 [ 4.357004] Solarflare NET driver v2.3 [ 4.359149] initcall efx_init_module+0x0/0xfd returned 0 after 1953 usecs [ 4.360040] calling i2400m_driver_init+0x0/0x2d @ 1 [ 4.361006] initcall i2400m_driver_init+0x0/0x2d returned 0 after 0 usecs [ 4.362006] calling i2400ms_driver_init+0x0/0x39 @ 1 [ 4.363092] initcall i2400ms_driver_init+0x0/0x39 returned 0 after 0 usecs [ 4.364007] calling i2o_iop_init+0x0/0x6c @ 1 [ 4.365004] I2O subsystem v1.325 [ 4.366005] i2o: max drivers = 8 [ 4.368123] initcall i2o_iop_init+0x0/0x6c returned 0 after 2929 usecs [ 4.369041] calling i2o_bus_init+0x0/0x68 @ 1 [ 4.370004] I2O Bus Adapter OSM v1.317 [ 4.371077] initcall i2o_bus_init+0x0/0x68 returned 0 after 976 usecs [ 4.372007] calling i2o_block_init+0x0/0x146 @ 1 [ 4.373004] I2O Block Device OSM v1.325 [ 4.376065] initcall i2o_block_init+0x0/0x146 returned 0 after 2929 usecs [ 4.377007] calling i2o_scsi_init+0x0/0x68 @ 1 [ 4.378005] I2O SCSI Peripheral OSM v1.316 [ 4.379067] initcall i2o_scsi_init+0x0/0x68 returned 0 after 976 usecs [ 4.380007] calling i2o_proc_init+0x0/0xb8 @ 1 [ 4.381006] I2O ProcFS OSM v1.316 [ 4.382066] initcall i2o_proc_init+0x0/0xb8 returned 0 after 976 usecs [ 4.383007] calling fusion_init+0x0/0x164 @ 1 [ 4.384005] Fusion MPT base driver 3.04.07 [ 4.385005] Copyright (c) 1999-2008 LSI Corporation [ 4.386031] initcall fusion_init+0x0/0x164 returned 0 after 1953 usecs [ 4.387006] calling mptspi_init+0x0/0x102 @ 1 [ 4.388005] Fusion MPT SPI Host driver 3.04.07 [ 4.389121] initcall mptspi_init+0x0/0x102 returned 0 after 976 usecs [ 4.390007] calling mptfc_init+0x0/0x115 @ 1 [ 4.391005] Fusion MPT FC Host driver 3.04.07 [ 4.392105] initcall mptfc_init+0x0/0x115 returned 0 after 976 usecs [ 4.393007] calling mptsas_init+0x0/0x119 @ 1 [ 4.394005] Fusion MPT SAS Host driver 3.04.07 [ 4.395105] initcall mptsas_init+0x0/0x119 returned 0 after 976 usecs [ 4.396007] calling mptctl_init+0x0/0x129 @ 1 [ 4.397005] Fusion MPT misc device (ioctl) driver 3.04.07 [ 4.398335] mptctl: Registered with Fusion MPT base driver [ 4.399006] mptctl: /dev/mptctl @ (major,minor=10,220) [ 4.400008] initcall mptctl_init+0x0/0x129 returned 0 after 2929 usecs [ 4.401006] calling mpt_lan_init+0x0/0xa4 @ 1 [ 4.402005] Fusion MPT LAN driver 3.04.07 [ 4.403010] initcall mpt_lan_init+0x0/0xa4 returned 0 after 976 usecs [ 4.404006] calling fw_core_init+0x0/0xb0 @ 1 [ 4.405110] initcall fw_core_init+0x0/0xb0 returned 0 after 0 usecs [ 4.406007] calling fw_ohci_init+0x0/0x42 @ 1 [ 4.407099] initcall fw_ohci_init+0x0/0x42 returned 0 after 0 usecs [ 4.408011] calling sbp2_init+0x0/0x6d @ 1 [ 4.410114] initcall sbp2_init+0x0/0x6d returned 0 after 976 usecs [ 4.411006] calling uio_init+0x0/0x2d @ 1 [ 4.412006] initcall uio_init+0x0/0x2d returned 0 after 0 usecs [ 4.413006] calling hilscher_init_module+0x0/0x42 @ 1 [ 4.414092] initcall hilscher_init_module+0x0/0x42 returned 0 after 0 usecs [ 4.415007] calling uio_pdrv_init+0x0/0x39 @ 1 [ 4.416074] initcall uio_pdrv_init+0x0/0x39 returned 0 after 0 usecs [ 4.417007] calling uio_pdrv_genirq_init+0x0/0x39 @ 1 [ 4.419112] initcall uio_pdrv_genirq_init+0x0/0x39 returned 0 after 976 usecs [ 4.420006] calling aectc_init+0x0/0x42 @ 1 [ 4.421080] initcall aectc_init+0x0/0x42 returned 0 after 0 usecs [ 4.422007] calling sercos3_init_module+0x0/0x42 @ 1 [ 4.424158] initcall sercos3_init_module+0x0/0x42 returned 0 after 976 usecs [ 4.425006] calling cdrom_init+0x0/0x91 @ 1 [ 4.426006] initcall cdrom_init+0x0/0x91 returned 0 after 0 usecs [ 4.427006] calling butterfly_init+0x0/0x39 @ 1 [ 4.428034] parport0: powerup/reset Butterfly [ 4.536134] parport_pc parport_pc.888: registered master spi42 [ 4.537034] spi spi42.1: spi_bitbang_setup, mode 0, 8 bits/w, 66 nsec/bit [ 4.539190] parport_pc parport_pc.888: registered child spi42.1 [ 4.540006] parport0: dataflash at spi42.1 [ 4.541021] parport0: AVR Butterfly [ 4.542008] initcall butterfly_init+0x0/0x39 returned 0 after 111328 usecs [ 4.543007] calling spi_gpio_init+0x0/0x40 @ 1 [ 4.544119] initcall spi_gpio_init+0x0/0x40 returned -19 after 0 usecs [ 4.545007] calling nonstatic_sysfs_init+0x0/0x39 @ 1 [ 4.546040] initcall nonstatic_sysfs_init+0x0/0x39 returned 0 after 0 usecs [ 4.547006] calling yenta_socket_init+0x0/0x42 @ 1 [ 4.548096] initcall yenta_socket_init+0x0/0x42 returned 0 after 0 usecs [ 4.549009] calling aoe_init+0x0/0xd5 @ 1 [ 4.552348] aoe: AoE v47 initialised. [ 4.553176] initcall aoe_init+0x0/0xd5 returned 0 after 2929 usecs [ 4.554007] calling uwb_subsys_init+0x0/0x77 @ 1 [ 4.555080] initcall uwb_subsys_init+0x0/0x77 returned 0 after 0 usecs [ 4.556007] calling hwarc_driver_init+0x0/0x42 @ 1 [ 4.558166] usbcore: registered new interface driver hwa-rc [ 4.559011] initcall hwarc_driver_init+0x0/0x42 returned 0 after 1953 usecs [ 4.560007] calling i1480_dfu_driver_init+0x0/0x42 @ 1 [ 4.562085] usbcore: registered new interface driver i1480-dfu-usb [ 4.563024] initcall i1480_dfu_driver_init+0x0/0x42 returned 0 after 1953 usecs [ 4.564007] calling i1480_est_init+0x0/0xa7 @ 1 [ 4.565012] initcall i1480_est_init+0x0/0xa7 returned 0 after 0 usecs [ 4.566007] calling gpio_vbus_init+0x0/0x40 @ 1 [ 4.567118] initcall gpio_vbus_init+0x0/0x40 returned -19 after 0 usecs [ 4.568007] calling mon_init+0x0/0x141 @ 1 [ 4.570168] initcall mon_init+0x0/0x141 returned 0 after 976 usecs [ 4.571058] calling ehci_hcd_init+0x0/0x9e @ 1 [ 4.572005] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.573163] ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; probably buggy MP table [ 4.574007] ehci_hcd 0000:00:02.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.1 setup! [ 4.575013] ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19 [ 4.576119] initcall ehci_hcd_init+0x0/0x9e returned 0 after 3906 usecs [ 4.577007] calling isp116x_init+0x0/0x67 @ 1 [ 4.578013] 116x: driver isp116x-hcd, 03 Nov 2005 [ 4.579086] initcall isp116x_init+0x0/0x67 returned 0 after 976 usecs [ 4.580007] calling ohci_hcd_mod_init+0x0/0xa3 @ 1 [ 4.581017] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.582075] ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table [ 4.583006] ohci_hcd 0000:00:02.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.0 setup! [ 4.584011] ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19 [ 4.585116] initcall ohci_hcd_mod_init+0x0/0xa3 returned 0 after 3906 usecs [ 4.586007] calling uhci_hcd_init+0x0/0xe6 @ 1 [ 4.587008] uhci_hcd: USB Universal Host Controller Interface driver [ 4.589175] initcall uhci_hcd_init+0x0/0xe6 returned 0 after 1953 usecs [ 4.590018] calling sl811h_init+0x0/0x67 @ 1 [ 4.591005] sl811: driver sl811-hcd, 19 May 2005 [ 4.593022] initcall sl811h_init+0x0/0x67 returned 0 after 1953 usecs [ 4.594008] calling isp1760_init+0x0/0x76 @ 1 [ 4.597171] initcall isp1760_init+0x0/0x76 returned 0 after 1953 usecs [ 4.598009] calling hwahc_driver_init+0x0/0x42 @ 1 [ 4.599083] usbcore: registered new interface driver hwa-hc [ 4.600011] initcall hwahc_driver_init+0x0/0x42 returned 0 after 976 usecs [ 4.601006] calling c67x00_init+0x0/0x39 @ 1 [ 4.602067] initcall c67x00_init+0x0/0x39 returned 0 after 0 usecs [ 4.603010] calling wusbcore_init+0x0/0x9a @ 1 [ 4.604066] initcall wusbcore_init+0x0/0x9a returned 0 after 0 usecs [ 4.605007] calling cbaf_driver_init+0x0/0x42 @ 1 [ 4.606078] usbcore: registered new interface driver wusb-cbaf [ 4.607010] initcall cbaf_driver_init+0x0/0x42 returned 0 after 976 usecs [ 4.608006] calling acm_init+0x0/0x128 @ 1 [ 4.610072] usbcore: registered new interface driver cdc_acm [ 4.611008] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters [ 4.612007] initcall acm_init+0x0/0x128 returned 0 after 2929 usecs [ 4.613006] calling usblp_init+0x0/0x42 @ 1 [ 4.614065] usbcore: registered new interface driver usblp [ 4.615010] initcall usblp_init+0x0/0x42 returned 0 after 976 usecs [ 4.616006] calling wdm_init+0x0/0x42 @ 1 [ 4.618078] usbcore: registered new interface driver cdc_wdm [ 4.619010] initcall wdm_init+0x0/0x42 returned 0 after 1953 usecs [ 4.620006] calling usbtmc_init+0x0/0x5e @ 1 [ 4.621067] usbcore: registered new interface driver usbtmc [ 4.622011] initcall usbtmc_init+0x0/0x5e returned 0 after 976 usecs [ 4.623006] calling usb_stor_init+0x0/0x74 @ 1 [ 4.624005] Initializing USB Mass Storage driver... [ 4.626025] usbcore: registered new interface driver usb-storage [ 4.627007] USB Mass Storage support registered. [ 4.628042] initcall usb_stor_init+0x0/0x74 returned 0 after 3906 usecs [ 4.629008] calling usb_usual_init+0x0/0x66 @ 1 [ 4.631170] usbcore: registered new interface driver libusual [ 4.632011] initcall usb_usual_init+0x0/0x66 returned 0 after 1953 usecs [ 4.633006] calling alauda_init+0x0/0x42 @ 1 [ 4.635165] usbcore: registered new interface driver ums-alauda [ 4.636011] initcall alauda_init+0x0/0x42 returned 0 after 1953 usecs [ 4.637006] calling datafab_init+0x0/0x42 @ 1 [ 4.638184] usbcore: registered new interface driver ums-datafab [ 4.639010] initcall datafab_init+0x0/0x42 returned 0 after 976 usecs [ 4.640039] calling freecom_init+0x0/0x42 @ 1 [ 4.641069] usbcore: registered new interface driver ums-freecom [ 4.642010] initcall freecom_init+0x0/0x42 returned 0 after 976 usecs [ 4.643006] calling isd200_init+0x0/0x42 @ 1 [ 4.644076] usbcore: registered new interface driver ums-isd200 [ 4.645010] initcall isd200_init+0x0/0x42 returned 0 after 976 usecs [ 4.646013] calling karma_init+0x0/0x42 @ 1 [ 4.648156] usbcore: registered new interface driver ums-karma [ 4.649011] initcall karma_init+0x0/0x42 returned 0 after 1953 usecs [ 4.650006] calling onetouch_init+0x0/0x42 @ 1 [ 4.652098] usbcore: registered new interface driver ums-onetouch [ 4.653012] initcall onetouch_init+0x0/0x42 returned 0 after 1953 usecs [ 4.654006] calling sddr09_init+0x0/0x42 @ 1 [ 4.655069] usbcore: registered new interface driver ums-sddr09 [ 4.656010] initcall sddr09_init+0x0/0x42 returned 0 after 976 usecs [ 4.657033] calling usbat_init+0x0/0x42 @ 1 [ 4.659086] usbcore: registered new interface driver ums-usbat [ 4.660011] initcall usbat_init+0x0/0x42 returned 0 after 1953 usecs [ 4.661006] calling microtek_drv_init+0x0/0x42 @ 1 [ 4.662107] usbcore: registered new interface driver microtekX6 [ 4.663011] initcall microtek_drv_init+0x0/0x42 returned 0 after 976 usecs [ 4.664027] calling berry_init+0x0/0x42 @ 1 [ 4.665068] usbcore: registered new interface driver berry_charge [ 4.666010] initcall berry_init+0x0/0x42 returned 0 after 976 usecs [ 4.667020] calling cypress_init+0x0/0x60 @ 1 [ 4.668069] usbcore: registered new interface driver cypress_cy7c63 [ 4.669012] initcall cypress_init+0x0/0x60 returned 0 after 976 usecs [ 4.670013] calling usb_cytherm_init+0x0/0x70 @ 1 [ 4.671067] usbcore: registered new interface driver cytherm [ 4.672008] cytherm: v1.0:Cypress USB Thermometer driver [ 4.673009] initcall usb_cytherm_init+0x0/0x70 returned 0 after 1953 usecs [ 4.674006] calling emi62_init+0x0/0x5e @ 1 [ 4.675067] usbcore: registered new interface driver emi62 - firmware loader [ 4.676011] initcall emi62_init+0x0/0x5e returned 0 after 976 usecs [ 4.677006] calling ftdi_elan_init+0x0/0x192 @ 1 [ 4.678006] driver ftdi-elan built at 11:52:35 on Jun 7 2009 [ 4.680007] usbcore: registered new interface driver ftdi-elan [ 4.681028] initcall ftdi_elan_init+0x0/0x192 returned 0 after 2929 usecs [ 4.682007] calling usb_idmouse_init+0x0/0x6c @ 1 [ 4.683005] idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver [ 4.684068] usbcore: registered new interface driver idmouse [ 4.685010] initcall usb_idmouse_init+0x0/0x6c returned 0 after 1953 usecs [ 4.686006] calling iowarrior_init+0x0/0x42 @ 1 [ 4.688121] usbcore: registered new interface driver iowarrior [ 4.689010] initcall iowarrior_init+0x0/0x42 returned 0 after 1953 usecs [ 4.690006] calling isight_firmware_init+0x0/0x42 @ 1 [ 4.691076] usbcore: registered new interface driver isight_firmware [ 4.692011] initcall isight_firmware_init+0x0/0x42 returned 0 after 976 usecs [ 4.693006] calling usb_lcd_init+0x0/0x60 @ 1 [ 4.695177] usbcore: registered new interface driver usblcd [ 4.696011] initcall usb_lcd_init+0x0/0x60 returned 0 after 1953 usecs [ 4.697006] calling tv_init+0x0/0x70 @ 1 [ 4.698090] usbcore: registered new interface driver trancevibrator [ 4.699009] trancevibrator: v1.1:PlayStation 2 Trance Vibrator driver [ 4.700007] initcall tv_init+0x0/0x70 returned 0 after 1953 usecs [ 4.701007] calling uss720_init+0x0/0x88 @ 1 [ 4.702078] usbcore: registered new interface driver uss720 [ 4.703011] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip [ 4.704037] uss720: NOTE: this is a special purpose driver to allow nonstandard [ 4.705005] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables [ 4.706005] uss720: If you just want to connect to a printer, use usblp instead [ 4.707007] initcall uss720_init+0x0/0x88 returned 0 after 4882 usecs [ 4.708006] calling vstusb_init+0x0/0x67 @ 1 [ 4.709080] usbcore: registered new interface driver vstusb [ 4.710011] initcall vstusb_init+0x0/0x67 returned 0 after 976 usecs [ 4.711007] calling i8042_init+0x0/0x12f @ 1 [ 4.716074] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.721014] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.726022] initcall i8042_init+0x0/0x12f returned 0 after 13671 usecs [ 4.732008] calling parkbd_init+0x0/0x1ae @ 1 [ 4.737010] parport0: cannot grant exclusive access for device parkbd [ 4.743014] initcall parkbd_init+0x0/0x1ae returned -19 after 5859 usecs [ 4.750007] calling serport_init+0x0/0x5a @ 1 [ 4.754008] initcall serport_init+0x0/0x5a returned 0 after 0 usecs [ 4.760007] calling ct82c710_init+0x0/0xe8 @ 1 [ 4.765018] initcall ct82c710_init+0x0/0xe8 returned -19 after 0 usecs [ 4.772007] calling serio_raw_init+0x0/0x42 @ 1 [ 4.777460] initcall serio_raw_init+0x0/0x42 returned 0 after 976 usecs [ 4.784057] calling emu_init+0x0/0x42 @ 1 [ 4.788442] initcall emu_init+0x0/0x42 returned 0 after 0 usecs [ 4.794008] calling fm801_gp_init+0x0/0x42 @ 1 [ 4.799114] initcall fm801_gp_init+0x0/0x42 returned 0 after 976 usecs [ 4.805067] calling l4_init+0x0/0xa8 @ 1 [ 4.809023] initcall l4_init+0x0/0xa8 returned -19 after 0 usecs [ 4.815007] calling mousedev_init+0x0/0xb3 @ 1 [ 4.821142] mice: PS/2 mouse device common for all mice [ 4.826013] initcall mousedev_init+0x0/0xb3 returned 0 after 5859 usecs [ 4.833007] calling joydev_init+0x0/0x39 @ 1 [ 4.837008] initcall joydev_init+0x0/0x39 returned 0 after 0 usecs [ 4.843007] calling atkbd_init+0x0/0x4e @ 1 [ 4.848049] initcall atkbd_init+0x0/0x4e returned 0 after 976 usecs [ 4.854023] calling sunkbd_init+0x0/0x42 @ 1 [ 4.858885] initcall sunkbd_init+0x0/0x42 returned 0 after 0 usecs [ 4.865008] calling lkkbd_init+0x0/0x42 @ 1 [ 4.869660] initcall lkkbd_init+0x0/0x42 returned 0 after 0 usecs [ 4.875008] calling nkbd_init+0x0/0x42 @ 1 [ 4.880156] initcall nkbd_init+0x0/0x42 returned 0 after 976 usecs [ 4.886008] calling skbd_init+0x0/0x42 @ 1 [ 4.890717] input: AT Translated Set 2 keyboard as /class/input/input0 [ 4.891254] initcall skbd_init+0x0/0x42 returned 0 after 976 usecs [ 4.897041] calling gpio_keys_init+0x0/0x39 @ 1 [ 4.902622] initcall gpio_keys_init+0x0/0x39 returned 0 after 0 usecs [ 4.909008] calling atp_init+0x0/0x42 @ 1 [ 4.913390] usbcore: registered new interface driver appletouch [ 4.919021] initcall atp_init+0x0/0x42 returned 0 after 5859 usecs [ 4.925028] calling bcm5974_init+0x0/0x42 @ 1 [ 4.930185] usbcore: registered new interface driver bcm5974 [ 4.935011] initcall bcm5974_init+0x0/0x42 returned 0 after 5859 usecs [ 4.942012] calling sermouse_init+0x0/0x42 @ 1 [ 4.947131] initcall sermouse_init+0x0/0x42 returned 0 after 976 usecs [ 4.953012] calling vsxxxaa_init+0x0/0x42 @ 1 [ 4.958315] initcall vsxxxaa_init+0x0/0x42 returned 0 after 0 usecs [ 4.964008] calling a3d_init+0x0/0x42 @ 1 [ 4.968887] initcall a3d_init+0x0/0x42 returned 0 after 0 usecs [ 4.974008] calling adi_init+0x0/0x42 @ 1 [ 4.979156] initcall adi_init+0x0/0x42 returned 0 after 976 usecs [ 4.985008] calling analog_init+0x0/0x118 @ 1 [ 4.989903] initcall analog_init+0x0/0x118 returned 0 after 0 usecs [ 4.996008] calling cobra_init+0x0/0x42 @ 1 [ 5.000655] initcall cobra_init+0x0/0x42 returned 0 after 0 usecs [ 5.006008] calling db9_init+0x0/0xd4 @ 1 [ 5.010007] initcall db9_init+0x0/0xd4 returned -19 after 0 usecs [ 5.016007] calling gc_init+0x0/0xe3 @ 1 [ 5.020007] initcall gc_init+0x0/0xe3 returned -19 after 0 usecs [ 5.026007] calling gf2k_init+0x0/0x42 @ 1 [ 5.031354] initcall gf2k_init+0x0/0x42 returned 0 after 0 usecs [ 5.037008] calling grip_init+0x0/0x42 @ 1 [ 5.041747] initcall grip_init+0x0/0x42 returned 0 after 0 usecs [ 5.047008] calling grip_init+0x0/0x42 @ 1 [ 5.052150] initcall grip_init+0x0/0x42 returned 0 after 976 usecs [ 5.058008] calling guillemot_init+0x0/0x42 @ 1 [ 5.063160] initcall guillemot_init+0x0/0x42 returned 0 after 976 usecs [ 5.069010] calling iforce_init+0x0/0x77 @ 1 [ 5.074336] usbcore: registered new interface driver iforce [ 5.080158] initcall iforce_init+0x0/0x77 returned 0 after 5859 usecs [ 5.086008] calling joydump_init+0x0/0x42 @ 1 [ 5.091251] initcall joydump_init+0x0/0x42 returned 0 after 0 usecs [ 5.097008] calling sw_init+0x0/0x42 @ 1 [ 5.101757] initcall sw_init+0x0/0x42 returned 0 after 0 usecs [ 5.107007] calling spaceorb_init+0x0/0x42 @ 1 [ 5.112349] initcall spaceorb_init+0x0/0x42 returned 0 after 0 usecs [ 5.118007] calling stinger_init+0x0/0x42 @ 1 [ 5.123356] initcall stinger_init+0x0/0x42 returned 0 after 0 usecs [ 5.129007] calling tmdc_init+0x0/0x42 @ 1 [ 5.134040] initcall tmdc_init+0x0/0x42 returned 0 after 976 usecs [ 5.140007] calling tgfx_init+0x0/0xe3 @ 1 [ 5.144007] initcall tgfx_init+0x0/0xe3 returned -19 after 0 usecs [ 5.150006] calling twidjoy_init+0x0/0x42 @ 1 [ 5.155226] initcall twidjoy_init+0x0/0x42 returned 0 after 0 usecs [ 5.161007] calling warrior_init+0x0/0x42 @ 1 [ 5.166163] initcall warrior_init+0x0/0x42 returned 0 after 976 usecs [ 5.172007] calling usb_xpad_init+0x0/0x5e @ 1 [ 5.177334] usbcore: registered new interface driver xpad [ 5.182009] xpad: X-Box pad driver [ 5.186007] initcall usb_xpad_init+0x0/0x5e returned 0 after 8789 usecs [ 5.192006] calling zhenhua_init+0x0/0x42 @ 1 [ 5.197405] initcall zhenhua_init+0x0/0x42 returned 0 after 0 usecs [ 5.203007] calling walkera0701_init+0x0/0x3f @ 1 [ 5.208006] walkera0701: parport without interrupt [ 5.213007] initcall walkera0701_init+0x0/0x3f returned -19 after 4882 usecs [ 5.220006] calling aiptek_init+0x0/0x6c @ 1 [ 5.224868] usbcore: registered new interface driver aiptek [ 5.230009] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x) [ 5.238005] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen [ 5.245007] initcall aiptek_init+0x0/0x6c returned 0 after 20507 usecs [ 5.252006] calling gtco_init+0x0/0x77 @ 1 [ 5.256661] usbcore: registered new interface driver gtco [ 5.262009] GTCO usb driver version: 2.00.0006initcall gtco_init+0x0/0x77 returned 0 after 9765 usecs [ 5.271006] calling kbtab_init+0x0/0x5e @ 1 [ 5.275778] usbcore: registered new interface driver kbtab [ 5.281009] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver [ 5.287007] initcall kbtab_init+0x0/0x5e returned 0 after 11718 usecs [ 5.293006] calling wacom_init+0x0/0x6a @ 1 [ 5.297924] usbcore: registered new interface driver wacom [ 5.303009] wacom: v1.50:USB Wacom Graphire and Wacom Intuos tablet driver [ 5.310007] initcall wacom_init+0x0/0x6a returned 0 after 12695 usecs [ 5.316006] calling ad7877_init+0x0/0x39 @ 1 [ 5.321288] initcall ad7877_init+0x0/0x39 returned 0 after 0 usecs [ 5.327009] calling ad7879_init+0x0/0x3b @ 1 [ 5.332043] i2c-core: driver [ad7879] registered [ 5.336008] initcall ad7879_init+0x0/0x3b returned 0 after 4882 usecs [ 5.343006] calling ads7846_init+0x0/0x39 @ 1 [ 5.347729] initcall ads7846_init+0x0/0x39 returned 0 after 0 usecs [ 5.354007] calling fujitsu_init+0x0/0x42 @ 1 [ 5.358653] initcall fujitsu_init+0x0/0x42 returned 0 after 0 usecs [ 5.364007] calling inexio_init+0x0/0x42 @ 1 [ 5.369489] initcall inexio_init+0x0/0x42 returned 0 after 0 usecs [ 5.375007] calling mtouch_init+0x0/0x42 @ 1 [ 5.380236] initcall mtouch_init+0x0/0x42 returned 0 after 0 usecs [ 5.386007] calling mk712_init+0x0/0x20a @ 1 [ 5.390009] mk712: device not present [ 5.394010] initcall mk712_init+0x0/0x20a returned -19 after 3906 usecs [ 5.401006] calling usbtouch_init+0x0/0x42 @ 1 [ 5.405802] usbcore: registered new interface driver usbtouchscreen [ 5.412011] initcall usbtouch_init+0x0/0x42 returned 0 after 6835 usecs [ 5.418006] calling pm_init+0x0/0x42 @ 1 [ 5.422903] initcall pm_init+0x0/0x42 returned 0 after 0 usecs [ 5.428007] calling tsc2007_init+0x0/0x3b @ 1 [ 5.433392] i2c-core: driver [tsc2007] registered [ 5.438008] initcall tsc2007_init+0x0/0x3b returned 0 after 4882 usecs [ 5.444007] calling ati_remote2_init+0x0/0x70 @ 1 [ 5.449618] usbcore: registered new interface driver ati_remote2 [ 5.455009] ati_remote2: ATI/Philips USB RF remote driver 0.3 [ 5.461007] initcall ati_remote2_init+0x0/0x70 returned 0 after 11718 usecs [ 5.468007] calling cm109_init+0x0/0x69 @ 1 [ 5.472006] cm109: Keymap for Komunikate KIP1000 phone loaded [ 5.478544] usbcore: registered new interface driver cm109 [ 5.484009] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad [ 5.490007] initcall cm109_init+0x0/0x69 returned 0 after 17578 usecs [ 5.497007] calling usb_keyspan_init+0x0/0x60 @ 1 [ 5.502089] usbcore: registered new interface driver keyspan_remote [ 5.508010] initcall usb_keyspan_init+0x0/0x60 returned 0 after 6835 usecs [ 5.515007] calling pcf50633_input_init+0x0/0x39 @ 1 [ 5.520469] initcall pcf50633_input_init+0x0/0x39 returned 0 after 0 usecs [ 5.527007] calling pcspkr_init+0x0/0x39 @ 1 [ 5.532067] input: PC Speaker as /class/input/input1 [ 5.537229] initcall pcspkr_init+0x0/0x39 returned 0 after 5859 usecs [ 5.543008] calling powermate_init+0x0/0x42 @ 1 [ 5.548489] usbcore: registered new interface driver powermate [ 5.554011] initcall powermate_init+0x0/0x42 returned 0 after 5859 usecs [ 5.561007] calling rotary_encoder_init+0x0/0x39 @ 1 [ 5.566287] initcall rotary_encoder_init+0x0/0x39 returned 0 after 0 usecs [ 5.573007] calling uinput_init+0x0/0x39 @ 1 [ 5.577922] initcall uinput_init+0x0/0x39 returned 0 after 0 usecs [ 5.584010] calling ali1563_init+0x0/0x42 @ 1 [ 5.588791] initcall ali1563_init+0x0/0x42 returned 0 after 0 usecs [ 5.595008] calling i2c_ali15x3_init+0x0/0x42 @ 1 [ 5.600131] initcall i2c_ali15x3_init+0x0/0x42 returned 0 after 976 usecs [ 5.606008] calling amd756_init+0x0/0x42 @ 1 [ 5.611487] initcall amd756_init+0x0/0x42 returned 0 after 0 usecs [ 5.617008] calling i2c_amd8111_init+0x0/0x42 @ 1 [ 5.622689] initcall i2c_amd8111_init+0x0/0x42 returned 0 after 0 usecs [ 5.629008] calling i2c_i801_init+0x0/0x42 @ 1 [ 5.634113] initcall i2c_i801_init+0x0/0x42 returned 0 after 976 usecs [ 5.640007] calling i2c_sch_init+0x0/0x42 @ 1 [ 5.645286] initcall i2c_sch_init+0x0/0x42 returned 0 after 0 usecs [ 5.651008] calling nforce2_init+0x0/0x42 @ 1 [ 5.656362] i2c-adapter i2c-0: adapter [SMBus nForce2 adapter at 4c00] registered [ 5.658010] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 [ 5.660069] i2c-adapter i2c-1: adapter [SMBus nForce2 adapter at 4c40] registered [ 5.661033] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 [ 5.662094] initcall nforce2_init+0x0/0x42 returned 0 after 5859 usecs [ 5.669017] calling i2c_piix4_init+0x0/0x42 @ 1 [ 5.673973] initcall i2c_piix4_init+0x0/0x42 returned 0 after 0 usecs [ 5.680008] calling i2c_sis5595_init+0x0/0x42 @ 1 [ 5.685471] initcall i2c_sis5595_init+0x0/0x42 returned 0 after 0 usecs [ 5.692008] calling i2c_sis96x_init+0x0/0x42 @ 1 [ 5.697073] initcall i2c_sis96x_init+0x0/0x42 returned 0 after 976 usecs [ 5.703038] calling i2c_vt586b_init+0x0/0x42 @ 1 [ 5.708711] initcall i2c_vt586b_init+0x0/0x42 returned 0 after 0 usecs [ 5.715008] calling ocores_i2c_init+0x0/0x39 @ 1 [ 5.720165] initcall ocores_i2c_init+0x0/0x39 returned 0 after 976 usecs [ 5.726008] calling i2c_adap_simtec_init+0x0/0x39 @ 1 [ 5.732209] initcall i2c_adap_simtec_init+0x0/0x39 returned 0 after 0 usecs [ 5.739008] calling i2c_parport_init+0x0/0x171 @ 1 [ 5.744008] i2c-parport-light: adapter type unspecified [ 5.749007] initcall i2c_parport_init+0x0/0x171 returned -19 after 4882 usecs [ 5.756007] calling taos_init+0x0/0x42 @ 1 [ 5.760809] initcall taos_init+0x0/0x42 returned 0 after 0 usecs [ 5.766008] calling i2c_voodoo3_init+0x0/0x42 @ 1 [ 5.771819] initcall i2c_voodoo3_init+0x0/0x42 returned 0 after 0 usecs [ 5.778008] calling i2c_pca_pf_init+0x0/0x39 @ 1 [ 5.783354] initcall i2c_pca_pf_init+0x0/0x39 returned 0 after 0 usecs [ 5.789008] calling ds1682_init+0x0/0x3b @ 1 [ 5.794438] i2c-core: driver [ds1682] registered [ 5.799011] initcall ds1682_init+0x0/0x3b returned 0 after 4882 usecs [ 5.805007] calling pca9539_init+0x0/0x3b @ 1 [ 5.810156] i2c-core: driver [pca9539] registered [ 5.814031] initcall pca9539_init+0x0/0x3b returned 0 after 4882 usecs [ 5.821007] calling pcf8574_init+0x0/0x3b @ 1 [ 5.826084] i2c-core: driver [pcf8574] registered [ 5.830030] initcall pcf8574_init+0x0/0x3b returned 0 after 4882 usecs [ 5.837007] calling pcf8575_init+0x0/0x3b @ 1 [ 5.841974] i2c-core: driver [pcf8575] registered [ 5.846031] initcall pcf8575_init+0x0/0x3b returned 0 after 4882 usecs [ 5.853007] calling tsl2550_init+0x0/0x3b @ 1 [ 5.857879] i2c-core: driver [tsl2550] registered [ 5.862009] initcall tsl2550_init+0x0/0x3b returned 0 after 4882 usecs [ 5.869007] calling saa7146_vv_init_module+0x0/0x2d @ 1 [ 5.874007] initcall saa7146_vv_init_module+0x0/0x2d returned 0 after 0 usecs [ 5.881007] calling videodev_init+0x0/0xad @ 1 [ 5.886006] Linux video capture interface: v2.00 [ 5.890908] initcall videodev_init+0x0/0xad returned 0 after 3906 usecs [ 5.897008] calling v4l2_i2c_drv_init+0x0/0x8b @ 1 [ 5.902607] i2c-core: driver [tuner] registered [ 5.907010] initcall v4l2_i2c_drv_init+0x0/0x8b returned 0 after 4882 usecs [ 5.914007] calling ir_init+0x0/0x3b @ 1 [ 5.918307] i2c-core: driver [ir-kbd-i2c] registered [ 5.923010] initcall ir_init+0x0/0x3b returned 0 after 4882 usecs [ 5.929007] calling v4l2_i2c_drv_init+0x0/0x94 @ 1 [ 5.934436] i2c-core: driver [saa6588] registered [ 5.939010] initcall v4l2_i2c_drv_init+0x0/0x94 returned 0 after 4882 usecs [ 5.946007] calling v4l2_i2c_drv_init+0x0/0x94 @ 1 [ 5.951178] i2c-core: driver [saa7115] registered [ 5.955010] initcall v4l2_i2c_drv_init+0x0/0x94 returned 0 after 4882 usecs [ 5.962007] calling v4l2_i2c_drv_init+0x0/0x94 @ 1 [ 5.967921] i2c-core: driver [saa717x] registered [ 5.972010] initcall v4l2_i2c_drv_init+0x0/0x94 returned 0 after 4882 usecs [ 5.979007] calling v4l2_i2c_drv_init+0x0/0x97 @ 1 [ 5.984660] i2c-core: driver [saa7127] registered [ 5.989010] initcall v4l2_i2c_drv_init+0x0/0x97 returned 0 after 4882 usecs [ 5.996009] calling saa7134_init+0x0/0x70 @ 1 [ 6.000007] saa7130/34: v4l2 driver version 0.2.15 loaded [ 6.006405] initcall saa7134_init+0x0/0x70 returned 0 after 5859 usecs [ 6.012008] calling empress_register+0x0/0x39 @ 1 [ 6.017050] initcall empress_register+0x0/0x39 returned 0 after 0 usecs [ 6.024008] calling v4l2_i2c_drv_init+0x0/0x94 @ 1 [ 6.029469] i2c-core: driver [saa6752hs] registered [ 6.034010] initcall v4l2_i2c_drv_init+0x0/0x94 returned 0 after 4882 usecs [ 6.041007] calling em28xx_module_init+0x0/0x6e @ 1 [ 6.046487] usbcore: registered new interface driver em28xx [ 6.052010] em28xx driver loaded [ 6.055008] initcall em28xx_module_init+0x0/0x6e returned 0 after 8789 usecs [ 6.062007] calling cx231xx_module_init+0x0/0x6c @ 1 [ 6.067006] cx231xx v4l2 driver loaded. [ 6.071433] usbcore: registered new interface driver cx231xx [ 6.077011] initcall cx231xx_module_init+0x0/0x6c returned 0 after 9765 usecs [ 6.084007] calling cx231xx_dvb_register+0x0/0x39 @ 1 [ 6.089027] cx231xx: Cx231xx dvb Extension initialized [ 6.094008] initcall cx231xx_dvb_register+0x0/0x39 returned 0 after 4882 usecs [ 6.101009] calling usbvision_init+0x0/0x128 @ 1 [ 6.106664] usbcore: registered new interface driver usbvision [ 6.112010] USBVision USB Video Device Driver for Linux : 0.9.10 [ 6.118008] initcall usbvision_init+0x0/0x128 returned 0 after 11718 usecs [ 6.125008] calling v4l2_i2c_drv_init+0x0/0x94 @ 1 [ 6.130463] i2c-core: driver [tvp5150] registered [ 6.135010] initcall v4l2_i2c_drv_init+0x0/0x94 returned 0 after 4882 usecs [ 6.142007] calling v4l2_i2c_drv_init+0x0/0x8e @ 1 [ 6.147219] i2c-core: driver [msp3400] registered [ 6.151010] initcall v4l2_i2c_drv_init+0x0/0x8e returned 0 after 3906 usecs [ 6.158008] calling v4l2_i2c_drv_init+0x0/0x94 @ 1 [ 6.163964] i2c-core: driver [cs53l32a] registered [ 6.168010] initcall v4l2_i2c_drv_init+0x0/0x94 returned 0 after 4882 usecs [ 6.175008] calling v4l2_i2c_drv_init+0x0/0x94 @ 1 [ 6.180789] i2c-core: driver [m52790] registered [ 6.185010] initcall v4l2_i2c_drv_init+0x0/0x94 returned 0 after 4882 usecs [ 6.192008] calling v4l2_i2c_drv_init+0x0/0x94 @ 1 [ 6.197443] i2c-core: driver [wm8775] registered [ 6.202010] initcall v4l2_i2c_drv_init+0x0/0x94 returned 0 after 4882 usecs [ 6.209008] calling v4l2_i2c_drv_init+0x0/0x94 @ 1 [ 6.214124] i2c-core: driver [wm8739] registered [ 6.218010] initcall v4l2_i2c_drv_init+0x0/0x94 returned 0 after 4882 usecs [ 6.225008] calling v4l2_i2c_drv_init+0x0/0x94 @ 1 [ 6.230764] i2c-core: driver [vp27smpx] registered [ 6.235010] initcall v4l2_i2c_drv_init+0x0/0x94 returned 0 after 4882 usecs [ 6.242008] calling v4l2_i2c_drv_init+0x0/0x94 @ 1 [ 6.247608] i2c-core: driver [ovcamchip] registered [ 6.252010] initcall v4l2_i2c_drv_init+0x0/0x94 returned 0 after 4882 usecs [ 6.259023] calling cpia2_init+0x0/0x56 @ 1 [ 6.263007] cpia2: V4L-Driver for Vision CPiA2 based cameras v2.0.0 [ 6.270207] usbcore: registered new interface driver cpia2 [ 6.275012] initcall cpia2_init+0x0/0x56 returned 0 after 11718 usecs [ 6.282008] calling hexium_init_module+0x0/0x7e @ 1 [ 6.287007] saa7146: register extension 'hexium gemini'. [ 6.292633] initcall hexium_init_module+0x0/0x7e returned 0 after 4882 usecs [ 6.299008] calling v4l2_i2c_drv_init+0x0/0x94 @ 1 [ 6.304771] i2c-core: driver [cx25840] registered [ 6.309010] initcall v4l2_i2c_drv_init+0x0/0x94 returned 0 after 4882 usecs [ 6.316008] calling v4l2_i2c_drv_init+0x0/0x94 @ 1 [ 6.321523] i2c-core: driver [upd64031a] registered [ 6.326010] initcall v4l2_i2c_drv_init+0x0/0x94 returned 0 after 4882 usecs [ 6.333010] calling v4l2_i2c_drv_init+0x0/0x94 @ 1 [ 6.338438] i2c-core: driver [upd64083] registered [ 6.343010] initcall v4l2_i2c_drv_init+0x0/0x94 returned 0 after 4882 usecs [ 6.350008] calling dabusb_init+0x0/0x11b @ 1 [ 6.354957] usbcore: registered new interface driver dabusb [ 6.360012] dabusb: v1.54:DAB-USB Interface Driver for Linux (c)1999 [ 6.366008] initcall dabusb_init+0x0/0x11b returned 0 after 11718 usecs [ 6.373008] calling usb_ov511_init+0x0/0x5e @ 1 [ 6.378317] usbcore: registered new interface driver ov511 [ 6.383013] ov511: v1.64 for Linux 2.5:ov511 USB Camera Driver [ 6.389009] initcall usb_ov511_init+0x0/0x5e returned 0 after 10742 usecs [ 6.396008] calling usb_stv680_init+0x0/0x96 @ 1 [ 6.401340] usbcore: registered new interface driver stv680 [ 6.406011] stv680 [usb_stv680_init:1550] [ 6.406012] STV(i): usb camera driver version v0.25 registering<6>stv680: v0.25:STV0680 USB Camera Driver [ 6.420008] initcall usb_stv680_init+0x0/0x96 returned 0 after 18554 usecs [ 6.427008] calling zr364xx_init+0x0/0x65 @ 1 [ 6.432133] usbcore: registered new interface driver zr364xx [ 6.437010] zr364xx: Zoran 364xx [ 6.441008] initcall zr364xx_init+0x0/0x65 returned 0 after 9765 usecs [ 6.447008] calling usb_pwc_init+0x0/0x46b @ 1 [ 6.452007] pwc: Philips webcam module version 10.0.13 loaded. [ 6.457006] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. [ 6.467006] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, [ 6.476006] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. [ 6.486007] pwc: Trace options: 0x0001 [ 6.489940] usbcore: registered new interface driver Philips webcam [ 6.496012] initcall usb_pwc_init+0x0/0x46b returned 0 after 42968 usecs [ 6.502008] calling zc0301_module_init+0x0/0x7e @ 1 [ 6.507007] zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10 [ 6.516008] usbcore: registered new interface driver zc0301 [ 6.521025] initcall zc0301_module_init+0x0/0x7e returned 0 after 13671 usecs [ 6.528008] calling gspca_init+0x0/0x47 @ 1 [ 6.533007] gspca: main v2.5.0 registered [ 6.537008] initcall gspca_init+0x0/0x47 returned 0 after 3906 usecs [ 6.543008] calling sd_mod_init+0x0/0x61 @ 1 [ 6.547931] usbcore: registered new interface driver conex [ 6.553010] conex: registered [ 6.556008] initcall sd_mod_init+0x0/0x61 returned 0 after 8789 usecs [ 6.562008] calling sd_mod_init+0x0/0x61 @ 1 [ 6.567402] usbcore: registered new interface driver etoms [ 6.572010] etoms: registered [ 6.575016] initcall sd_mod_init+0x0/0x61 returned 0 after 7812 usecs [ 6.582008] calling sd_mod_init+0x0/0x61 @ 1 [ 6.586863] usbcore: registered new interface driver mars [ 6.592010] mars: registered [ 6.595008] initcall sd_mod_init+0x0/0x61 returned 0 after 8789 usecs [ 6.601008] calling sd_mod_init+0x0/0x66 @ 1 [ 6.606147] usbcore: registered new interface driver mr97310a [ 6.611010] mr97310a: registered [ 6.615011] initcall sd_mod_init+0x0/0x66 returned 0 after 9765 usecs [ 6.621009] calling sd_mod_init+0x0/0x61 @ 1 [ 6.626139] usbcore: registered new interface driver ov534 [ 6.631010] ov534: registered [ 6.634008] initcall sd_mod_init+0x0/0x61 returned 0 after 8789 usecs [ 6.641008] calling sd_mod_init+0x0/0x61 @ 1 [ 6.645593] usbcore: registered new interface driver pac7311 [ 6.651010] pac7311: registered [ 6.654008] initcall sd_mod_init+0x0/0x61 returned 0 after 8789 usecs [ 6.660008] calling sd_mod_init+0x0/0x61 @ 1 [ 6.665400] usbcore: registered new interface driver sonixb [ 6.670010] sonixb: registered [ 6.674008] initcall sd_mod_init+0x0/0x61 returned 0 after 8789 usecs [ 6.680008] calling sd_mod_init+0x0/0x61 @ 1 [ 6.685052] usbcore: registered new interface driver spca500 [ 6.690010] spca500: registered [ 6.693009] initcall sd_mod_init+0x0/0x61 returned 0 after 8789 usecs [ 6.700008] calling sd_mod_init+0x0/0x61 @ 1 [ 6.704139] usbcore: registered new interface driver spca508 [ 6.710011] spca508: registered [ 6.713009] initcall sd_mod_init+0x0/0x61 returned 0 after 8789 usecs [ 6.720008] calling sd_mod_init+0x0/0x61 @ 1 [ 6.724678] usbcore: registered new interface driver sq905 [ 6.730010] sq905: registered [ 6.733009] initcall sd_mod_init+0x0/0x61 returned 0 after 8789 usecs [ 6.739008] calling sd_mod_init+0x0/0x61 @ 1 [ 6.744138] usbcore: registered new interface driver sq905c [ 6.749010] sq905c: registered [ 6.752009] initcall sd_mod_init+0x0/0x61 returned 0 after 8789 usecs [ 6.759008] calling sd_mod_init+0x0/0x61 @ 1 [ 6.763768] usbcore: registered new interface driver t613 [ 6.769010] t613: registered [ 6.772009] initcall sd_mod_init+0x0/0x61 returned 0 after 8789 usecs [ 6.778008] calling sd_mod_init+0x0/0x61 @ 1 [ 6.783082] usbcore: registered new interface driver tv8532 [ 6.788010] tv8532: registered [ 6.791008] initcall sd_mod_init+0x0/0x61 returned 0 after 8789 usecs [ 6.798008] calling sd_mod_init+0x0/0x61 @ 1 [ 6.802733] usbcore: registered new interface driver vc032x [ 6.808010] vc032x: registered [ 6.811008] initcall sd_mod_init+0x0/0x61 returned 0 after 8789 usecs [ 6.817008] calling sd_mod_init+0x0/0x61 @ 1 [ 6.822368] usbcore: registered new interface driver zc3xx [ 6.827019] zc3xx: registered [ 6.830009] initcall sd_mod_init+0x0/0x61 returned 0 after 7812 usecs [ 6.837008] calling mod_m5602_init+0x0/0x61 @ 1 [ 6.842109] usbcore: registered new interface driver ALi m5602 [ 6.847011] ALi m5602: registered [ 6.851009] initcall mod_m5602_init+0x0/0x61 returned 0 after 9765 usecs [ 6.857009] calling sd_mod_init+0x0/0x61 @ 1 [ 6.862513] usbcore: registered new interface driver STV06xx [ 6.868011] STV06xx: registered [ 6.871009] initcall sd_mod_init+0x0/0x61 returned 0 after 8789 usecs [ 6.877009] calling hdpvr_init+0x0/0x60 @ 1 [ 6.882231] usbcore: registered new interface driver hdpvr [ 6.887012] initcall hdpvr_init+0x0/0x60 returned 0 after 4882 usecs [ 6.894022] calling ibmcam_init+0x0/0xa9 @ 1 [ 6.898699] usbcore: registered new interface driver ibmcam [ 6.904013] initcall ibmcam_init+0x0/0xa9 returned 0 after 5859 usecs [ 6.910008] calling ultracam_init+0x0/0xa9 @ 1 [ 6.915495] usbcore: registered new interface driver ultracam [ 6.921012] initcall ultracam_init+0x0/0xa9 returned 0 after 5859 usecs [ 6.927015] calling konicawc_init+0x0/0xbf @ 1 [ 6.932007] konicawc: v1.4:Konica Webcam driver [ 6.937161] usbcore: registered new interface driver konicawc [ 6.942012] initcall konicawc_init+0x0/0xbf returned 0 after 9765 usecs [ 6.949008] calling qcm_init+0x0/0x68 @ 1 [ 6.953007] quickcam_messenger: v0.01:Logitech Quickcam Messenger USB [ 6.960282] usbcore: registered new interface driver QCM [ 6.965012] initcall qcm_init+0x0/0x68 returned 0 after 11718 usecs [ 6.971012] calling module_start+0x0/0xc3 @ 1 [ 6.976007] ivtv: Start initialization, version 1.4.1 [ 6.981584] ivtv: End initialization [ 6.985009] initcall module_start+0x0/0xc3 returned 0 after 8789 usecs [ 6.991009] calling vivi_init+0x0/0xa7 @ 1 [ 6.996371] vivi-000: V4L2 device registered as /dev/video0 [ 7.001009] Video Technology Magazine Virtual Video Capture Board ver 0.6.0 successfully loaded. [ 7.010010] initcall vivi_init+0x0/0xa7 returned 0 after 14648 usecs [ 7.017010] calling cx23885_init+0x0/0x57 @ 1 [ 7.021008] cx23885 driver version 0.0.2 loaded [ 7.026337] initcall cx23885_init+0x0/0x57 returned 0 after 4882 usecs [ 7.032010] calling maxiradio_radio_init+0x0/0x42 @ 1 [ 7.038285] initcall maxiradio_radio_init+0x0/0x42 returned 0 after 0 usecs [ 7.045009] calling gemtek_pci_init+0x0/0x42 @ 1 [ 7.050183] initcall gemtek_pci_init+0x0/0x42 returned 0 after 976 usecs [ 7.056009] calling maestro_radio_init+0x0/0x5e @ 1 [ 7.062101] initcall maestro_radio_init+0x0/0x5e returned 0 after 976 usecs [ 7.069009] calling dsbr100_init+0x0/0x5a @ 1 [ 7.073719] usbcore: registered new interface driver dsbr100 [ 7.079011] dsbr100: v0.45:D-Link DSB-R100 USB FM radio driver [ 7.085009] initcall dsbr100_init+0x0/0x5a returned 0 after 11718 usecs [ 7.091009] calling si470x_module_init+0x0/0x4e @ 1 [ 7.096007] USB radio driver for Si470x FM Radio Receivers, Version 1.0.9 [ 7.103785] usbcore: registered new interface driver radio-si470x [ 7.109013] initcall si470x_module_init+0x0/0x4e returned 0 after 12695 usecs [ 7.117009] calling amradio_init+0x0/0x6e @ 1 [ 7.121657] usbcore: registered new interface driver radio-mr800 [ 7.127011] radio_mr800: version 0.11 AverMedia MR 800 USB FM radio driver [ 7.134012] initcall amradio_init+0x0/0x6e returned 0 after 12695 usecs [ 7.141009] calling tea5764_init+0x0/0x53 @ 1 [ 7.145802] i2c-core: driver [radio-tea5764] registered [ 7.151010] radio_tea5764: v0.01: A driver for the TEA5764 radio chip for EZX Phones. [ 7.158009] initcall tea5764_init+0x0/0x53 returned 0 after 12695 usecs [ 7.165009] calling v4l2_i2c_drv_init+0x0/0x94 @ 1 [ 7.170542] i2c-core: driver [au8522] registered [ 7.175011] initcall v4l2_i2c_drv_init+0x0/0x94 returned 0 after 4882 usecs [ 7.182009] calling budget_init+0x0/0x39 @ 1 [ 7.186008] saa7146: register extension 'budget dvb'. [ 7.191745] initcall budget_init+0x0/0x39 returned 0 after 4882 usecs [ 7.198009] calling budget_ci_init+0x0/0x39 @ 1 [ 7.202008] saa7146: register extension 'budget_ci dvb'. [ 7.208345] initcall budget_ci_init+0x0/0x39 returned 0 after 5859 usecs [ 7.215009] calling ttusb_init+0x0/0x6b @ 1 [ 7.219523] usbcore: registered new interface driver ttusb [ 7.225013] initcall ttusb_init+0x0/0x6b returned 0 after 5859 usecs [ 7.231010] calling flexcop_module_init+0x0/0x3b @ 1 [ 7.236007] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully [ 7.245009] initcall flexcop_module_init+0x0/0x3b returned 0 after 8789 usecs [ 7.252009] calling flexcop_usb_module_init+0x0/0x60 @ 1 [ 7.257853] usbcore: registered new interface driver b2c2_flexcop_usb [ 7.264013] initcall flexcop_usb_module_init+0x0/0x60 returned 0 after 6835 usecs [ 7.271009] calling a800_module_init+0x0/0x60 @ 1 [ 7.276767] usbcore: registered new interface driver dvb_usb_a800 [ 7.282013] initcall a800_module_init+0x0/0x60 returned 0 after 5859 usecs [ 7.289009] calling dibusb_module_init+0x0/0x60 @ 1 [ 7.294900] usbcore: registered new interface driver dvb_usb_dibusb_mb [ 7.301013] initcall dibusb_module_init+0x0/0x60 returned 0 after 6835 usecs [ 7.308009] calling umt_module_init+0x0/0x60 @ 1 [ 7.313394] usbcore: registered new interface driver dvb_usb_umt_010 [ 7.319013] initcall umt_module_init+0x0/0x60 returned 0 after 5859 usecs [ 7.326009] calling m920x_module_init+0x0/0x60 @ 1 [ 7.331612] usbcore: registered new interface driver dvb_usb_m920x [ 7.337013] initcall m920x_module_init+0x0/0x60 returned 0 after 5859 usecs [ 7.344009] calling au6610_module_init+0x0/0x60 @ 1 [ 7.349920] usbcore: registered new interface driver dvb_usb_au6610 [ 7.356013] initcall au6610_module_init+0x0/0x60 returned 0 after 6835 usecs [ 7.363009] calling cxusb_module_init+0x0/0x60 @ 1 [ 7.368332] usbcore: registered new interface driver dvb_usb_cxusb [ 7.374013] initcall cxusb_module_init+0x0/0x60 returned 0 after 5859 usecs [ 7.381009] calling ttusb2_module_init+0x0/0x60 @ 1 [ 7.386639] usbcore: registered new interface driver dvb_usb_ttusb2 [ 7.392015] initcall ttusb2_module_init+0x0/0x60 returned 0 after 5859 usecs [ 7.399009] calling opera1_module_init+0x0/0x60 @ 1 [ 7.405140] usbcore: registered new interface driver opera1 [ 7.410013] initcall opera1_module_init+0x0/0x60 returned 0 after 5859 usecs [ 7.417009] calling anysee_module_init+0x0/0x67 @ 1 [ 7.422934] usbcore: registered new interface driver dvb_usb_anysee [ 7.429013] initcall anysee_module_init+0x0/0x67 returned 0 after 6835 usecs [ 7.436009] calling dtv5100_module_init+0x0/0x60 @ 1 [ 7.441508] usbcore: registered new interface driver dvb_usb_dtv5100 [ 7.447013] initcall dtv5100_module_init+0x0/0x60 returned 0 after 5859 usecs [ 7.455009] calling af9015_usb_module_init+0x0/0x60 @ 1 [ 7.460522] usbcore: registered new interface driver dvb_usb_af9015 [ 7.466013] initcall af9015_usb_module_init+0x0/0x60 returned 0 after 5859 usecs [ 7.474009] calling cinergyt2_usb_init+0x0/0x60 @ 1 [ 7.479355] usbcore: registered new interface driver cinergyT2 [ 7.485013] initcall cinergyt2_usb_init+0x0/0x60 returned 0 after 5859 usecs [ 7.492009] calling pluto2_init+0x0/0x42 @ 1 [ 7.496818] initcall pluto2_init+0x0/0x42 returned 0 after 0 usecs [ 7.503010] calling smscore_module_init+0x0/0xa5 @ 1 [ 7.508010] initcall smscore_module_init+0x0/0xa5 returned 0 after 0 usecs [ 7.514010] calling smsusb_module_init+0x0/0x8b @ 1 [ 7.520139] usbcore: registered new interface driver smsusb [ 7.525014] initcall smsusb_module_init+0x0/0x8b returned 0 after 5859 usecs [ 7.532010] calling smsdvb_module_init+0x0/0x91 @ 1 [ 7.537036] initcall smsdvb_module_init+0x0/0x91 returned 0 after 0 usecs [ 7.544010] calling dm1105_init+0x0/0x42 @ 1 [ 7.549115] initcall dm1105_init+0x0/0x42 returned 0 after 976 usecs [ 7.555010] calling w1_init+0x0/0xc8 @ 1 [ 7.559007] Driver for 1-wire Dallas network protocol. [ 7.565149] initcall w1_init+0x0/0xc8 returned 0 after 5859 usecs [ 7.571029] calling matrox_w1_init+0x0/0x42 @ 1 [ 7.576232] initcall matrox_w1_init+0x0/0x42 returned 0 after 0 usecs [ 7.582010] calling sensors_ds2482_init+0x0/0x3b @ 1 [ 7.587984] i2c-core: driver [ds2482] registered [ 7.592034] initcall sensors_ds2482_init+0x0/0x3b returned 0 after 4882 usecs [ 7.599040] calling w1_gpio_init+0x0/0x40 @ 1 [ 7.604458] initcall w1_gpio_init+0x0/0x40 returned -19 after 0 usecs [ 7.611010] calling w1_smem_init+0x0/0x65 @ 1 [ 7.615047] initcall w1_smem_init+0x0/0x65 returned 0 after 0 usecs [ 7.621009] calling w1_f23_init+0x0/0x39 @ 1 [ 7.626010] initcall w1_f23_init+0x0/0x39 returned 0 after 0 usecs [ 7.632009] calling w1_ds2760_init+0x0/0x51 @ 1 [ 7.637008] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 7.645010] initcall w1_ds2760_init+0x0/0x51 returned 0 after 7812 usecs [ 7.652013] calling w1_bq27000_init+0x0/0x49 @ 1 [ 7.657010] initcall w1_bq27000_init+0x0/0x49 returned -17 after 0 usecs [ 7.663009] initcall w1_bq27000_init+0x0/0x49 returned with error code -17 [ 7.670009] calling ds2760_battery_init+0x0/0x39 @ 1 [ 7.676039] initcall ds2760_battery_init+0x0/0x39 returned 0 after 976 usecs [ 7.683016] calling bq27x00_battery_init+0x0/0x57 @ 1 [ 7.688515] i2c-core: driver [bq27200-battery] registered [ 7.693012] initcall bq27x00_battery_init+0x0/0x57 returned 0 after 4882 usecs [ 7.701033] calling pcipcwd_init_module+0x0/0x5c @ 1 [ 7.706436] initcall pcipcwd_init_module+0x0/0x5c returned 0 after 0 usecs [ 7.713010] calling wdtpci_init+0x0/0x42 @ 1 [ 7.717943] initcall wdtpci_init+0x0/0x42 returned 0 after 0 usecs [ 7.724010] calling acq_init+0x0/0x83 @ 1 [ 7.728008] WDT driver for Acquire single board computer initialising. [ 7.735176] acquirewdt: I/O address 0x0043 already in use [ 7.740029] acquirewdt: probe of acquirewdt failed with error -5 [ 7.746012] initcall acq_init+0x0/0x83 returned 0 after 17578 usecs [ 7.752009] calling advwdt_init+0x0/0x83 @ 1 [ 7.757008] WDT driver for Advantech single board computer initialising. [ 7.764310] advantechwdt: initialized. timeout=60 sec (nowayout=0) [ 7.770017] initcall advwdt_init+0x0/0x83 returned 0 after 13671 usecs [ 7.777010] calling sc520_wdt_init+0x0/0x114 @ 1 [ 7.782025] sc520_wdt: cannot register miscdev on minor=130 (err=-16) [ 7.788024] initcall sc520_wdt_init+0x0/0x114 returned -16 after 5859 usecs [ 7.795010] initcall sc520_wdt_init+0x0/0x114 returned with error code -16 [ 7.802009] calling ibwdt_init+0x0/0x83 @ 1 [ 7.806008] ib700wdt: WDT driver for IB700 single board computer initialising. [ 7.814325] ib700wdt: START method I/O 443 is not available. [ 7.820026] ib700wdt: probe of ib700wdt failed with error -5 [ 7.825015] initcall ibwdt_init+0x0/0x83 returned 0 after 18554 usecs [ 7.832010] calling wafwdt_init+0x0/0x18e @ 1 [ 7.836008] WDT driver for Wafer 5823 single board computer initialising. [ 7.843012] Wafer 5823 WDT: I/O address 0x0443 already in use [ 7.849012] initcall wafwdt_init+0x0/0x18e returned -5 after 12695 usecs [ 7.856010] initcall wafwdt_init+0x0/0x18e returned with error code -5 [ 7.862009] calling watchdog_init+0x0/0x8a @ 1 [ 7.867008] i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04 [ 7.874104] initcall watchdog_init+0x0/0x8a returned 0 after 6835 usecs [ 7.880010] calling iTCO_wdt_init_module+0x0/0x8a @ 1 [ 7.885008] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 7.891633] iTCO_wdt: No card detected [ 7.895025] initcall iTCO_wdt_init_module+0x0/0x8a returned 0 after 9765 usecs [ 7.902010] calling iTCO_vendor_init_module+0x0/0x41 @ 1 [ 7.908011] iTCO_vendor_support: vendor-support=0 [ 7.913010] initcall iTCO_vendor_init_module+0x0/0x41 returned 0 after 4882 usecs [ 7.920009] calling it87_wdt_init+0x0/0x4ee @ 1 [ 7.925066] IT87 WDT: Unsupported Chip found, Chip 8712 Revision 07 [ 7.931010] initcall it87_wdt_init+0x0/0x4ee returned -19 after 5859 usecs [ 7.938009] calling hpwdt_init+0x0/0x42 @ 1 [ 7.942890] initcall hpwdt_init+0x0/0x42 returned 0 after 0 usecs [ 7.949010] calling sbc60xxwdt_init+0x0/0x1ab @ 1 [ 7.953013] sbc60xxwdt: I/O address 0x0443 already in use [ 7.959010] initcall sbc60xxwdt_init+0x0/0x1ab returned -5 after 5859 usecs [ 7.966010] initcall sbc60xxwdt_init+0x0/0x1ab returned with error code -5 [ 7.973009] calling sbc8360_init+0x0/0x1ca @ 1 [ 7.977011] sbc8360: failed to register misc device [ 7.982014] initcall sbc8360_init+0x0/0x1ca returned -16 after 4882 usecs [ 7.989010] initcall sbc8360_init+0x0/0x1ca returned with error code -16 [ 7.996011] calling cpu5wdt_init_module+0x0/0x32 @ 1 [ 8.001012] cpu5wdt: sorry, was my fault [ 8.005008] cpu5wdt: misc_register failed [ 8.009012] initcall cpu5wdt_init_module+0x0/0x32 returned -16 after 7812 usecs [ 8.016010] initcall cpu5wdt_init_module+0x0/0x32 returned with error code -16 [ 8.023010] calling sch311x_wdt_init+0x0/0x176 @ 1 [ 8.028028] initcall sch311x_wdt_init+0x0/0x176 returned -19 after 0 usecs [ 8.035010] calling wb_smsc_wdt_init+0x0/0x1de @ 1 [ 8.040008] SMsC 37B787 watchdog component driver 1.1 initialising... [ 8.047856] smsc37b787_wdt: Unable to register miscdev on minor 130 [ 8.054013] initcall wb_smsc_wdt_init+0x0/0x1de returned -16 after 13671 usecs [ 8.061010] initcall wb_smsc_wdt_init+0x0/0x1de returned with error code -16 [ 8.068009] calling wdt_init+0x0/0x142 @ 1 [ 8.072008] WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O chip initialising. [ 8.080027] w83627hf/thf/hg WDT: Watchdog already running. Resetting timeout to 60 sec [ 8.088023] w83627hf/thf/hg WDT: cannot register miscdev on minor=130 (err=-16) [ 8.095012] initcall wdt_init+0x0/0x142 returned -16 after 22460 usecs [ 8.102010] initcall wdt_init+0x0/0x142 returned with error code -16 [ 8.108010] calling w83877f_wdt_init+0x0/0x183 @ 1 [ 8.113013] w83877f_wdt: I/O address 0x0443 already in use [ 8.119013] initcall w83877f_wdt_init+0x0/0x183 returned -5 after 5859 usecs [ 8.126010] initcall w83877f_wdt_init+0x0/0x183 returned with error code -5 [ 8.133010] calling w83977f_wdt_init+0x0/0x16d @ 1 [ 8.138008] W83977F WDT: W83977F WDT driver, v1.00 [ 8.143010] W83977F WDT: cannot register miscdev on minor=130 (err=-16) [ 8.149012] initcall w83977f_wdt_init+0x0/0x16d returned -16 after 10742 usecs [ 8.156010] initcall w83977f_wdt_init+0x0/0x16d returned with error code -16 [ 8.163010] calling zf_init+0x0/0x185 @ 1 [ 8.168009] machzwd: MachZ ZF-Logic Watchdog driver initializing. [ 8.174009] machzwd: no ZF-Logic found [ 8.177010] initcall zf_init+0x0/0x185 returned -19 after 8789 usecs [ 8.184010] calling watchdog_init+0x0/0xde @ 1 [ 8.188010] epx_c3: cannot register miscdev on minor=130 (err=-16) [ 8.194013] initcall watchdog_init+0x0/0xde returned -16 after 6835 usecs [ 8.201010] initcall watchdog_init+0x0/0xde returned with error code -16 [ 8.208010] calling linear_init+0x0/0x39 @ 1 [ 8.212019] md: linear personality registered for level -1 [ 8.218010] initcall linear_init+0x0/0x39 returned 0 after 5859 usecs [ 8.224010] calling raid0_init+0x0/0x39 @ 1 [ 8.229009] md: raid0 personality registered for level 0 [ 8.234010] initcall raid0_init+0x0/0x39 returned 0 after 4882 usecs [ 8.240010] calling raid_init+0x0/0x39 @ 1 [ 8.244009] md: raid1 personality registered for level 1 [ 8.250010] initcall raid_init+0x0/0x39 returned 0 after 5859 usecs [ 8.256010] calling raid_init+0x0/0x39 @ 1 [ 8.260009] md: raid10 personality registered for level 10 [ 8.266010] initcall raid_init+0x0/0x39 returned 0 after 5859 usecs [ 8.272010] calling multipath_init+0x0/0x39 @ 1 [ 8.277009] md: multipath personality registered for level -4 [ 8.282010] initcall multipath_init+0x0/0x39 returned 0 after 4882 usecs [ 8.289010] calling dm_init+0x0/0x6f @ 1 [ 8.295316] device-mapper: uevent: version 1.0.3 [ 8.301192] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 8.309014] initcall dm_init+0x0/0x6f returned 0 after 15625 usecs [ 8.315075] calling dm_crypt_init+0x0/0x8f @ 1 [ 8.320845] initcall dm_crypt_init+0x0/0x8f returned 0 after 0 usecs [ 8.327011] calling dm_snapshot_init+0x0/0x240 @ 1 [ 8.333333] initcall dm_snapshot_init+0x0/0x240 returned 0 after 976 usecs [ 8.340023] calling dm_mirror_init+0x0/0x9f @ 1 [ 8.345349] initcall dm_mirror_init+0x0/0x9f returned 0 after 976 usecs [ 8.351011] calling dm_dirty_log_init+0x0/0x7f @ 1 [ 8.356025] initcall dm_dirty_log_init+0x0/0x7f returned 0 after 0 usecs [ 8.363010] calling dm_zero_init+0x0/0x57 @ 1 [ 8.368011] initcall dm_zero_init+0x0/0x57 returned 0 after 0 usecs [ 8.374010] calling cpufreq_stats_init+0x0/0xd6 @ 1 [ 8.379025] initcall cpufreq_stats_init+0x0/0xd6 returned 0 after 0 usecs [ 8.386010] calling cpufreq_gov_powersave_init+0x0/0x39 @ 1 [ 8.391011] initcall cpufreq_gov_powersave_init+0x0/0x39 returned 0 after 0 usecs [ 8.399010] calling cpufreq_gov_dbs_init+0x0/0x8e @ 1 [ 8.404403] initcall cpufreq_gov_dbs_init+0x0/0x8e returned 0 after 0 usecs [ 8.411011] calling init_ladder+0x0/0x39 @ 1 [ 8.415025] cpuidle: using governor ladder [ 8.419011] initcall init_ladder+0x0/0x39 returned 0 after 3906 usecs [ 8.426014] calling init_menu+0x0/0x39 @ 1 [ 8.430009] cpuidle: using governor menu [ 8.434011] initcall init_menu+0x0/0x39 returned 0 after 3906 usecs [ 8.440010] calling mmc_test_init+0x0/0x39 @ 1 [ 8.445437] initcall mmc_test_init+0x0/0x39 returned 0 after 0 usecs [ 8.451011] calling sdio_uart_init+0x0/0x11a @ 1 [ 8.456723] initcall sdio_uart_init+0x0/0x11a returned 0 after 0 usecs [ 8.463011] calling wbsd_drv_init+0x0/0xb5 @ 1 [ 8.467008] wbsd: Winbond W83L51xD SD/MMC card interface driver [ 8.473008] wbsd: Copyright(c) Pierre Ossman [ 8.478221] initcall wbsd_drv_init+0x0/0xb5 returned 0 after 10742 usecs [ 8.485011] calling tifm_sd_init+0x0/0x39 @ 1 [ 8.489950] initcall tifm_sd_init+0x0/0x39 returned 0 after 0 usecs [ 8.496011] calling mmc_spi_init+0x0/0x39 @ 1 [ 8.500861] initcall mmc_spi_init+0x0/0x39 returned 0 after 0 usecs [ 8.507011] calling memstick_init+0x0/0xab @ 1 [ 8.512147] initcall memstick_init+0x0/0xab returned 0 after 976 usecs [ 8.518011] calling jmb38x_ms_init+0x0/0x42 @ 1 [ 8.523534] initcall jmb38x_ms_init+0x0/0x42 returned 0 after 0 usecs [ 8.529011] calling bd2802_init+0x0/0x3b @ 1 [ 8.534550] i2c-core: driver [BD2802] registered [ 8.539014] initcall bd2802_init+0x0/0x3b returned 0 after 4882 usecs [ 8.545010] calling pca9532_init+0x0/0x3b @ 1 [ 8.550260] i2c-core: driver [pca9532] registered [ 8.554013] initcall pca9532_init+0x0/0x3b returned 0 after 3906 usecs [ 8.561010] calling heartbeat_trig_init+0x0/0x39 @ 1 [ 8.566056] initcall heartbeat_trig_init+0x0/0x39 returned 0 after 0 usecs [ 8.573010] calling bl_trig_init+0x0/0x39 @ 1 [ 8.577012] initcall bl_trig_init+0x0/0x39 returned 0 after 0 usecs [ 8.584010] calling gpio_trig_init+0x0/0x39 @ 1 [ 8.588012] initcall gpio_trig_init+0x0/0x39 returned 0 after 0 usecs [ 8.595010] calling defon_trig_init+0x0/0x39 @ 1 [ 8.599012] initcall defon_trig_init+0x0/0x39 returned 0 after 0 usecs [ 8.606010] calling dcdbas_init+0x0/0x8d @ 1 [ 8.611151] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 8.618015] initcall dcdbas_init+0x0/0x8d returned 0 after 7812 usecs [ 8.625011] calling ibft_init+0x0/0x1e6 @ 1 [ 8.629025] No iBFT detected. [ 8.632011] initcall ibft_init+0x0/0x1e6 returned 0 after 2929 usecs [ 8.638010] calling ioat_init_module+0x0/0x42 @ 1 [ 8.643968] initcall ioat_init_module+0x0/0x42 returned 0 after 0 usecs [ 8.650011] calling hid_init+0x0/0x55 @ 1 [ 8.654877] initcall hid_init+0x0/0x55 returned 0 after 0 usecs [ 8.660011] calling usb_mouse_init+0x0/0x5e @ 1 [ 8.665672] usbcore: registered new interface driver usbmouse [ 8.671013] usbmouse: v1.6:USB HID Boot Protocol mouse driver [ 8.677013] initcall usb_mouse_init+0x0/0x5e returned 0 after 11718 usecs [ 8.683013] calling flow_cache_init+0x0/0x1d5 @ 1 [ 8.689166] initcall flow_cache_init+0x0/0x1d5 returned 0 after 976 usecs [ 8.695011] calling pg_init+0x0/0x178 @ 1 [ 8.700017] pktgen v2.70: Packet Generator for packet performance testing. [ 8.707114] initcall pg_init+0x0/0x178 returned 0 after 6835 usecs [ 8.713011] calling llc_init+0x0/0x47 @ 1 [ 8.717011] initcall llc_init+0x0/0x47 returned 0 after 0 usecs [ 8.723010] calling snap_init+0x0/0x61 @ 1 [ 8.727047] initcall snap_init+0x0/0x61 returned 0 after 0 usecs [ 8.733010] calling blackhole_module_init+0x0/0x39 @ 1 [ 8.738011] initcall blackhole_module_init+0x0/0x39 returned 0 after 0 usecs [ 8.745010] calling police_init_module+0x0/0x39 @ 1 [ 8.750021] initcall police_init_module+0x0/0x39 returned 0 after 0 usecs [ 8.757010] calling gact_init_module+0x0/0x45 @ 1 [ 8.762009] GACT probability on [ 8.765010] initcall gact_init_module+0x0/0x45 returned 0 after 2929 usecs [ 8.772010] calling pedit_init_module+0x0/0x39 @ 1 [ 8.777010] initcall pedit_init_module+0x0/0x39 returned 0 after 0 usecs [ 8.784010] calling simp_init_module+0x0/0x55 @ 1 [ 8.788009] Simple TC action Loaded [ 8.792010] initcall simp_init_module+0x0/0x55 returned 0 after 3906 usecs [ 8.799010] calling cbq_module_init+0x0/0x39 @ 1 [ 8.803010] initcall cbq_module_init+0x0/0x39 returned 0 after 0 usecs [ 8.810012] calling htb_module_init+0x0/0x39 @ 1 [ 8.815011] initcall htb_module_init+0x0/0x39 returned 0 after 0 usecs [ 8.821010] calling red_module_init+0x0/0x39 @ 1 [ 8.826011] initcall red_module_init+0x0/0x39 returned 0 after 0 usecs [ 8.832010] calling gred_module_init+0x0/0x39 @ 1 [ 8.837011] initcall gred_module_init+0x0/0x39 returned 0 after 0 usecs [ 8.844010] calling ingress_module_init+0x0/0x39 @ 1 [ 8.849011] initcall ingress_module_init+0x0/0x39 returned 0 after 0 usecs [ 8.856010] calling dsmark_module_init+0x0/0x39 @ 1 [ 8.861011] initcall dsmark_module_init+0x0/0x39 returned 0 after 0 usecs [ 8.868010] calling sfq_module_init+0x0/0x39 @ 1 [ 8.872011] initcall sfq_module_init+0x0/0x39 returned 0 after 0 usecs [ 8.879010] calling tbf_module_init+0x0/0x39 @ 1 [ 8.883011] initcall tbf_module_init+0x0/0x39 returned 0 after 0 usecs [ 8.890010] calling netem_module_init+0x0/0x45 @ 1 [ 8.895009] netem: version 1.2 [ 8.898011] initcall netem_module_init+0x0/0x45 returned 0 after 2929 usecs [ 8.905010] calling drr_init+0x0/0x39 @ 1 [ 8.909011] initcall drr_init+0x0/0x39 returned 0 after 0 usecs [ 8.915010] calling init_route4+0x0/0x39 @ 1 [ 8.919021] initcall init_route4+0x0/0x39 returned 0 after 0 usecs [ 8.925010] calling init_fw+0x0/0x39 @ 1 [ 8.929011] initcall init_fw+0x0/0x39 returned 0 after 0 usecs [ 8.935010] calling init_rsvp+0x0/0x39 @ 1 [ 8.939012] initcall init_rsvp+0x0/0x39 returned 0 after 0 usecs [ 8.945010] calling cls_flow_init+0x0/0x39 @ 1 [ 8.950011] initcall cls_flow_init+0x0/0x39 returned 0 after 0 usecs [ 8.956010] calling init_cgroup_cls+0x0/0x39 @ 1 [ 8.961011] initcall init_cgroup_cls+0x0/0x39 returned 0 after 0 usecs [ 8.968011] calling nfnetlink_init+0x0/0x86 @ 1 [ 8.972009] Netfilter messages via NETLINK v0.30. [ 8.977058] initcall nfnetlink_init+0x0/0x86 returned 0 after 4882 usecs [ 8.984011] calling nfnetlink_log_init+0x0/0xfd @ 1 [ 8.989049] initcall nfnetlink_log_init+0x0/0xfd returned 0 after 0 usecs [ 8.995011] calling nf_conntrack_standalone_init+0x0/0x39 @ 1 [ 9.001011] nf_conntrack version 0.5.0 (8191 buckets, 32764 max) [ 9.008439] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 9.016011] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 9.024011] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 9.030068] initcall nf_conntrack_standalone_init+0x0/0x39 returned 0 after 28320 usecs [ 9.038011] calling nf_conntrack_proto_dccp_init+0x0/0x94 @ 1 [ 9.044111] initcall nf_conntrack_proto_dccp_init+0x0/0x94 returned 0 after 0 usecs [ 9.051011] calling nf_ct_proto_gre_init+0x0/0x6c @ 1 [ 9.057015] initcall nf_ct_proto_gre_init+0x0/0x6c returned 0 after 0 usecs [ 9.064010] calling nf_conntrack_proto_sctp_init+0x0/0x83 @ 1 [ 9.069016] initcall nf_conntrack_proto_sctp_init+0x0/0x83 returned 0 after 0 usecs [ 9.077010] calling nf_conntrack_proto_udplite_init+0x0/0x69 @ 1 [ 9.083015] initcall nf_conntrack_proto_udplite_init+0x0/0x69 returned 0 after 0 usecs [ 9.091010] calling ctnetlink_init+0x0/0xf9 @ 1 [ 9.096009] ctnetlink v0.93: registering with nfnetlink. [ 9.101032] initcall ctnetlink_init+0x0/0xf9 returned 0 after 4882 usecs [ 9.108013] calling nf_conntrack_irc_init+0x0/0x18e @ 1 [ 9.113028] initcall nf_conntrack_irc_init+0x0/0x18e returned 0 after 0 usecs [ 9.120011] calling nf_conntrack_netbios_ns_init+0x0/0x45 @ 1 [ 9.126012] initcall nf_conntrack_netbios_ns_init+0x0/0x45 returned 0 after 0 usecs [ 9.134011] calling nf_conntrack_pptp_init+0x0/0x65 @ 1 [ 9.139012] initcall nf_conntrack_pptp_init+0x0/0x65 returned 0 after 0 usecs [ 9.146011] calling nf_conntrack_sane_init+0x0/0x1c1 @ 1 [ 9.152017] initcall nf_conntrack_sane_init+0x0/0x1c1 returned 0 after 0 usecs [ 9.159011] calling nf_conntrack_tftp_init+0x0/0x1a2 @ 1 [ 9.164012] initcall nf_conntrack_tftp_init+0x0/0x1a2 returned 0 after 0 usecs [ 9.171010] calling xt_init+0x0/0x172 @ 1 [ 9.176016] initcall xt_init+0x0/0x172 returned 0 after 976 usecs [ 9.182011] calling tcpudp_mt_init+0x0/0x3e @ 1 [ 9.186027] initcall tcpudp_mt_init+0x0/0x3e returned 0 after 0 usecs [ 9.193011] calling connmark_tg_init+0x0/0x3e @ 1 [ 9.197015] initcall connmark_tg_init+0x0/0x3e returned 0 after 0 usecs [ 9.204011] calling dscp_tg_init+0x0/0x3e @ 1 [ 9.209014] initcall dscp_tg_init+0x0/0x3e returned 0 after 0 usecs [ 9.215011] calling hl_tg_init+0x0/0x3e @ 1 [ 9.219012] initcall hl_tg_init+0x0/0x3e returned 0 after 0 usecs [ 9.225011] calling led_tg_init+0x0/0x39 @ 1 [ 9.230011] initcall led_tg_init+0x0/0x39 returned 0 after 0 usecs [ 9.236011] calling mark_tg_init+0x0/0x3e @ 1 [ 9.240013] initcall mark_tg_init+0x0/0x3e returned 0 after 0 usecs [ 9.246011] calling nflog_tg_init+0x0/0x39 @ 1 [ 9.251011] initcall nflog_tg_init+0x0/0x39 returned 0 after 0 usecs [ 9.257011] calling nfqueue_tg_init+0x0/0x3e @ 1 [ 9.262013] initcall nfqueue_tg_init+0x0/0x3e returned 0 after 0 usecs [ 9.269011] calling notrack_tg_init+0x0/0x39 @ 1 [ 9.273012] initcall notrack_tg_init+0x0/0x39 returned 0 after 0 usecs [ 9.280011] calling xt_rateest_tg_init+0x0/0x64 @ 1 [ 9.285017] initcall xt_rateest_tg_init+0x0/0x64 returned 0 after 0 usecs [ 9.292011] calling tcpmss_tg_init+0x0/0x3e @ 1 [ 9.296012] initcall tcpmss_tg_init+0x0/0x3e returned 0 after 0 usecs [ 9.303011] calling tcpoptstrip_tg_init+0x0/0x3e @ 1 [ 9.308012] initcall tcpoptstrip_tg_init+0x0/0x3e returned 0 after 0 usecs [ 9.315011] calling trace_tg_init+0x0/0x39 @ 1 [ 9.319011] initcall trace_tg_init+0x0/0x39 returned 0 after 0 usecs [ 9.325011] calling xt_cluster_mt_init+0x0/0x39 @ 1 [ 9.330012] initcall xt_cluster_mt_init+0x0/0x39 returned 0 after 0 usecs [ 9.337011] calling comment_mt_init+0x0/0x39 @ 1 [ 9.342012] initcall comment_mt_init+0x0/0x39 returned 0 after 0 usecs [ 9.348011] calling connbytes_mt_init+0x0/0x39 @ 1 [ 9.353012] initcall connbytes_mt_init+0x0/0x39 returned 0 after 0 usecs [ 9.360011] calling connlimit_mt_init+0x0/0x39 @ 1 [ 9.365012] initcall connlimit_mt_init+0x0/0x39 returned 0 after 0 usecs [ 9.372011] calling connmark_mt_init+0x0/0x3e @ 1 [ 9.376012] initcall connmark_mt_init+0x0/0x3e returned 0 after 0 usecs [ 9.383011] calling dccp_mt_init+0x0/0x7a @ 1 [ 9.387018] initcall dccp_mt_init+0x0/0x7a returned 0 after 0 usecs [ 9.394011] calling esp_mt_init+0x0/0x3e @ 1 [ 9.398012] initcall esp_mt_init+0x0/0x3e returned 0 after 0 usecs [ 9.404011] calling hl_mt_init+0x0/0x3e @ 1 [ 9.409012] initcall hl_mt_init+0x0/0x3e returned 0 after 0 usecs [ 9.415011] calling length_mt_init+0x0/0x3e @ 1 [ 9.419012] initcall length_mt_init+0x0/0x3e returned 0 after 0 usecs [ 9.426011] calling multiport_mt_init+0x0/0x3e @ 1 [ 9.431013] initcall multiport_mt_init+0x0/0x3e returned 0 after 0 usecs [ 9.437011] calling physdev_mt_init+0x0/0x39 @ 1 [ 9.442012] initcall physdev_mt_init+0x0/0x39 returned 0 after 0 usecs [ 9.449011] calling policy_mt_init+0x0/0x3e @ 1 [ 9.453013] initcall policy_mt_init+0x0/0x3e returned 0 after 0 usecs [ 9.460011] calling sctp_mt_init+0x0/0x3e @ 1 [ 9.464012] initcall sctp_mt_init+0x0/0x3e returned 0 after 0 usecs [ 9.470011] calling statistic_mt_init+0x0/0x39 @ 1 [ 9.475012] initcall statistic_mt_init+0x0/0x39 returned 0 after 0 usecs [ 9.482011] calling string_mt_init+0x0/0x3e @ 1 [ 9.486012] initcall string_mt_init+0x0/0x3e returned 0 after 0 usecs [ 9.493011] calling time_mt_init+0x0/0x74 @ 1 [ 9.497010] xt_time: kernel timezone is -0000 [ 9.502012] initcall time_mt_init+0x0/0x74 returned 0 after 4882 usecs [ 9.508011] calling u32_mt_init+0x0/0x39 @ 1 [ 9.513012] initcall u32_mt_init+0x0/0x39 returned 0 after 0 usecs [ 9.519011] calling ip_vs_init+0x0/0xe3 @ 1 [ 9.523134] IPVS: Registered protocols (AH, ESP) [ 9.528754] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) [ 9.536089] IPVS: ipvs loaded. [ 9.539012] initcall ip_vs_init+0x0/0xe3 returned 0 after 15625 usecs [ 9.545011] calling ip_vs_wrr_init+0x0/0x39 @ 1 [ 9.550021] IPVS: [wrr] scheduler registered. [ 9.554011] initcall ip_vs_wrr_init+0x0/0x39 returned 0 after 3906 usecs [ 9.561011] calling ip_vs_wlc_init+0x0/0x39 @ 1 [ 9.565010] IPVS: [wlc] scheduler registered. [ 9.570011] initcall ip_vs_wlc_init+0x0/0x39 returned 0 after 4882 usecs [ 9.577011] calling ip_vs_lblcr_init+0x0/0x6d @ 1 [ 9.581020] IPVS: [lblcr] scheduler registered. [ 9.586011] initcall ip_vs_lblcr_init+0x0/0x6d returned 0 after 4882 usecs [ 9.593011] calling ip_vs_sh_init+0x0/0x39 @ 1 [ 9.597010] IPVS: [sh] scheduler registered. [ 9.602011] initcall ip_vs_sh_init+0x0/0x39 returned 0 after 4882 usecs [ 9.608011] calling ip_vs_sed_init+0x0/0x39 @ 1 [ 9.613010] IPVS: [sed] scheduler registered. [ 9.617011] initcall ip_vs_sed_init+0x0/0x39 returned 0 after 3906 usecs [ 9.624011] calling ip_vs_nq_init+0x0/0x39 @ 1 [ 9.628012] IPVS: [nq] scheduler registered. [ 9.633011] initcall ip_vs_nq_init+0x0/0x39 returned 0 after 4882 usecs [ 9.639012] calling sysctl_ipv4_init+0x0/0x74 @ 1 [ 9.644029] initcall sysctl_ipv4_init+0x0/0x74 returned 0 after 0 usecs [ 9.651011] calling ipip_init+0x0/0x95 @ 1 [ 9.655010] IPv4 over IPv4 tunneling driver [ 9.660020] initcall ipip_init+0x0/0x95 returned 0 after 4882 usecs [ 9.666011] calling ipgre_init+0x0/0xd7 @ 1 [ 9.670009] GRE over IPv4 tunneling driver [ 9.675113] initcall ipgre_init+0x0/0xd7 returned 0 after 4882 usecs [ 9.681012] calling init_syncookies+0x0/0x40 @ 1 [ 9.686043] initcall init_syncookies+0x0/0x40 returned 0 after 0 usecs [ 9.692011] calling esp4_init+0x0/0x8f @ 1 [ 9.696014] initcall esp4_init+0x0/0x8f returned 0 after 0 usecs [ 9.702032] calling xfrm4_beet_init+0x0/0x3e @ 1 [ 9.707012] initcall xfrm4_beet_init+0x0/0x3e returned 0 after 0 usecs [ 9.714015] calling tunnel4_init+0x0/0x8f @ 1 [ 9.718012] initcall tunnel4_init+0x0/0x8f returned 0 after 0 usecs [ 9.724011] calling xfrm4_mode_tunnel_init+0x0/0x3e @ 1 [ 9.730012] initcall xfrm4_mode_tunnel_init+0x0/0x3e returned 0 after 0 usecs [ 9.737012] calling ipv4_netfilter_init+0x0/0x39 @ 1 [ 9.742030] initcall ipv4_netfilter_init+0x0/0x39 returned 0 after 0 usecs [ 9.749012] calling nf_conntrack_l3proto_ipv4_init+0x0/0x153 @ 1 [ 9.755033] initcall nf_conntrack_l3proto_ipv4_init+0x0/0x153 returned 0 after 0 usecs [ 9.763013] calling nf_defrag_init+0x0/0x3e @ 1 [ 9.767013] initcall nf_defrag_init+0x0/0x3e returned 0 after 0 usecs [ 9.774012] calling arp_tables_init+0x0/0xb3 @ 1 [ 9.779041] arp_tables: (C) 2002 David S. Miller [ 9.783012] initcall arp_tables_init+0x0/0xb3 returned 0 after 3906 usecs [ 9.790011] calling arpt_mangle_init+0x0/0x39 @ 1 [ 9.795012] initcall arpt_mangle_init+0x0/0x39 returned 0 after 0 usecs [ 9.801011] calling arptable_filter_init+0x0/0x6a @ 1 [ 9.807037] initcall arptable_filter_init+0x0/0x6a returned 0 after 0 usecs [ 9.814012] calling ip_queue_init+0x0/0x162 @ 1 [ 9.818066] initcall ip_queue_init+0x0/0x162 returned 0 after 0 usecs [ 9.825012] calling inet_diag_init+0x0/0x94 @ 1 [ 9.829031] initcall inet_diag_init+0x0/0x94 returned 0 after 0 usecs [ 9.836012] calling tcp_diag_init+0x0/0x39 @ 1 [ 9.840024] initcall tcp_diag_init+0x0/0x39 returned 0 after 0 usecs [ 9.847012] calling cubictcp_register+0x0/0x88 @ 1 [ 9.852011] TCP cubic registered [ 9.855012] initcall cubictcp_register+0x0/0x88 returned 0 after 2929 usecs [ 9.862012] calling xfrm_user_init+0x0/0x71 @ 1 [ 9.866010] Initializing XFRM netlink socket [ 9.871041] initcall xfrm_user_init+0x0/0x71 returned 0 after 4882 usecs [ 9.877012] calling inet6_init+0x0/0x300 @ 1 [ 9.884278] NET: Registered protocol family 10 [ 9.891265] lo: Disabled Privacy Extensions [ 9.896558] tunl0: Disabled Privacy Extensions [ 9.901350] initcall inet6_init+0x0/0x300 returned 0 after 18554 usecs [ 9.907013] calling tunnel6_init+0x0/0x8f @ 1 [ 9.912012] initcall tunnel6_init+0x0/0x8f returned 0 after 0 usecs [ 9.918011] calling mip6_init+0x0/0xe1 @ 1 [ 9.922009] Mobile IPv6 [ 9.925013] initcall mip6_init+0x0/0xe1 returned 0 after 2929 usecs [ 9.931012] calling ip6_tables_init+0x0/0xd5 @ 1 [ 9.936050] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 9.941012] initcall ip6_tables_init+0x0/0xd5 returned 0 after 4882 usecs [ 9.948012] calling ip6table_mangle_init+0x0/0x6a @ 1 [ 9.953046] initcall ip6table_mangle_init+0x0/0x6a returned 0 after 0 usecs [ 9.960012] calling ip6_queue_init+0x0/0x162 @ 1 [ 9.965050] initcall ip6_queue_init+0x0/0x162 returned 0 after 0 usecs [ 9.971016] calling ip6table_raw_init+0x0/0x6a @ 1 [ 9.976032] initcall ip6table_raw_init+0x0/0x6a returned 0 after 0 usecs [ 9.983017] calling nf_conntrack_l3proto_ipv6_init+0x0/0x140 @ 1 [ 9.989051] initcall nf_conntrack_l3proto_ipv6_init+0x0/0x140 returned 0 after 0 usecs [ 9.997012] calling frag_mt6_init+0x0/0x39 @ 1 [ 10.002013] initcall frag_mt6_init+0x0/0x39 returned 0 after 0 usecs [ 10.008012] calling hbh_mt6_init+0x0/0x3e @ 1 [ 10.012013] initcall hbh_mt6_init+0x0/0x3e returned 0 after 0 usecs [ 10.019012] calling rt_mt6_init+0x0/0x39 @ 1 [ 10.023013] initcall rt_mt6_init+0x0/0x39 returned 0 after 0 usecs [ 10.029012] calling log_tg6_init+0x0/0x50 @ 1 [ 10.034014] initcall log_tg6_init+0x0/0x50 returned 0 after 0 usecs [ 10.040012] calling ip6_tunnel_init+0x0/0xc8 @ 1 [ 10.045468] ip6tnl0: Disabled Privacy Extensions [ 10.050095] initcall ip6_tunnel_init+0x0/0xc8 returned 0 after 4882 usecs [ 10.057012] calling packet_init+0x0/0x6d @ 1 [ 10.061012] NET: Registered protocol family 17 [ 10.065052] initcall packet_init+0x0/0x6d returned 0 after 3906 usecs [ 10.072012] calling ipsec_pfkey_init+0x0/0xac @ 1 [ 10.077011] NET: Registered protocol family 15 [ 10.081026] initcall ipsec_pfkey_init+0x0/0xac returned 0 after 3906 usecs [ 10.088012] calling br_init+0x0/0x100 @ 1 [ 10.093144] Bridge firewalling registered [ 10.097036] initcall br_init+0x0/0x100 returned 0 after 4882 usecs [ 10.103023] calling ebtables_init+0x0/0x77 @ 1 [ 10.107012] Ebtables v2.0 registered [ 10.111012] initcall ebtables_init+0x0/0x77 returned 0 after 3906 usecs [ 10.118012] calling ebtable_broute_init+0x0/0x4a @ 1 [ 10.123050] initcall ebtable_broute_init+0x0/0x4a returned 0 after 0 usecs [ 10.130012] calling ebtable_filter_init+0x0/0x6a @ 1 [ 10.135030] initcall ebtable_filter_init+0x0/0x6a returned 0 after 0 usecs [ 10.142012] calling ebtable_nat_init+0x0/0x6a @ 1 [ 10.146033] initcall ebtable_nat_init+0x0/0x6a returned 0 after 0 usecs [ 10.153013] calling ebt_802_3_init+0x0/0x39 @ 1 [ 10.158013] initcall ebt_802_3_init+0x0/0x39 returned 0 after 0 usecs [ 10.164012] calling ebt_arp_init+0x0/0x39 @ 1 [ 10.168013] initcall ebt_arp_init+0x0/0x39 returned 0 after 0 usecs [ 10.175012] calling ebt_ip_init+0x0/0x39 @ 1 [ 10.179013] initcall ebt_ip_init+0x0/0x39 returned 0 after 0 usecs [ 10.185012] calling ebt_ip6_init+0x0/0x39 @ 1 [ 10.190013] initcall ebt_ip6_init+0x0/0x39 returned 0 after 0 usecs [ 10.196012] calling ebt_limit_init+0x0/0x39 @ 1 [ 10.201013] initcall ebt_limit_init+0x0/0x39 returned 0 after 0 usecs [ 10.207012] calling ebt_mark_m_init+0x0/0x39 @ 1 [ 10.212013] initcall ebt_mark_m_init+0x0/0x39 returned 0 after 0 usecs [ 10.218012] calling ebt_pkttype_init+0x0/0x39 @ 1 [ 10.223013] initcall ebt_pkttype_init+0x0/0x39 returned 0 after 0 usecs [ 10.230015] calling ebt_dnat_init+0x0/0x39 @ 1 [ 10.234013] initcall ebt_dnat_init+0x0/0x39 returned 0 after 0 usecs [ 10.241012] calling ebt_redirect_init+0x0/0x39 @ 1 [ 10.245013] initcall ebt_redirect_init+0x0/0x39 returned 0 after 0 usecs [ 10.252012] calling ebt_snat_init+0x0/0x39 @ 1 [ 10.257013] initcall ebt_snat_init+0x0/0x39 returned 0 after 0 usecs [ 10.263012] calling ebt_log_init+0x0/0x50 @ 1 [ 10.268014] initcall ebt_log_init+0x0/0x50 returned 0 after 0 usecs [ 10.274012] calling ebt_nflog_init+0x0/0x39 @ 1 [ 10.278013] initcall ebt_nflog_init+0x0/0x39 returned 0 after 0 usecs [ 10.285012] calling dsa_init_module+0x0/0x3b @ 1 [ 10.290013] initcall dsa_init_module+0x0/0x3b returned 0 after 0 usecs [ 10.296012] calling edsa_init_module+0x0/0x3b @ 1 [ 10.301013] initcall edsa_init_module+0x0/0x3b returned 0 after 0 usecs [ 10.307012] calling trailer_init_module+0x0/0x3b @ 1 [ 10.313013] initcall trailer_init_module+0x0/0x3b returned 0 after 0 usecs [ 10.319012] calling mv88e6060_init+0x0/0x3b @ 1 [ 10.324024] initcall mv88e6060_init+0x0/0x3b returned 0 after 0 usecs [ 10.330012] calling mv88e6123_61_65_init+0x0/0x3b @ 1 [ 10.336013] initcall mv88e6123_61_65_init+0x0/0x3b returned 0 after 0 usecs [ 10.343012] calling mv88e6131_init+0x0/0x3b @ 1 [ 10.347013] initcall mv88e6131_init+0x0/0x3b returned 0 after 0 usecs [ 10.354011] calling dsa_init_module+0x0/0x39 @ 1 [ 10.359119] initcall dsa_init_module+0x0/0x39 returned 0 after 976 usecs [ 10.365012] calling atalk_init+0x0/0xb3 @ 1 [ 10.370011] NET: Registered protocol family 5 [ 10.382069] initcall atalk_init+0x0/0xb3 returned 0 after 11718 usecs [ 10.388012] calling ircomm_init+0x0/0xc1 @ 1 [ 10.392031] IrCOMM protocol (Dag Brattli) [ 10.396012] initcall ircomm_init+0x0/0xc1 returned 0 after 3906 usecs [ 10.403011] calling ircomm_tty_init+0x0/0x15a @ 1 [ 10.425488] initcall ircomm_tty_init+0x0/0x15a returned 0 after 16601 usecs [ 10.432037] calling init_sunrpc+0x0/0x83 @ 1 [ 10.438430] RPC: Registered udp transport module. [ 10.443022] RPC: Registered tcp transport module. [ 10.448015] initcall init_sunrpc+0x0/0x83 returned 0 after 10742 usecs [ 10.454012] calling init_rpcsec_gss+0x0/0x73 @ 1 [ 10.459081] initcall init_rpcsec_gss+0x0/0x73 returned 0 after 0 usecs [ 10.465013] calling init_kerberos_module+0x0/0x55 @ 1 [ 10.471053] initcall init_kerberos_module+0x0/0x55 returned 0 after 0 usecs [ 10.478012] calling init_spkm3_module+0x0/0x55 @ 1 [ 10.482018] initcall init_spkm3_module+0x0/0x55 returned 0 after 0 usecs [ 10.489015] calling decnet_init+0x0/0xb4 @ 1 [ 10.494011] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team [ 10.503243] DECnet: Routing cache hash table of 1024 buckets, 56Kbytes [ 10.510288] NET: Registered protocol family 12 [ 10.514038] initcall decnet_init+0x0/0xb4 returned 0 after 19531 usecs [ 10.521012] calling phonet_init+0x0/0x9e @ 1 [ 10.525068] NET: Registered protocol family 35 [ 10.530559] initcall phonet_init+0x0/0x9e returned 0 after 4882 usecs [ 10.537013] calling pep_register+0x0/0x3e @ 1 [ 10.541920] initcall pep_register+0x0/0x3e returned 0 after 0 usecs [ 10.548013] calling vlan_proto_init+0x0/0xdb @ 1 [ 10.552011] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> [ 10.559010] All bugs added by David S. Miller <davem@redhat.com> [ 10.565055] initcall vlan_proto_init+0x0/0xdb returned 0 after 12695 usecs [ 10.572012] calling dccp_init+0x0/0x3e6 @ 1 [ 10.583293] CCID: Activated CCID 2 (TCP-like) [ 10.588446] CCID: Activated CCID 3 (TCP-Friendly Rate Control) [ 10.594017] initcall dccp_init+0x0/0x3e6 returned 0 after 17578 usecs [ 10.601049] calling dccp_v4_init+0x0/0xae @ 1 [ 10.611112] initcall dccp_v4_init+0x0/0xae returned 0 after 5859 usecs [ 10.617013] calling dccp_v6_init+0x0/0xae @ 1 [ 10.623259] initcall dccp_v6_init+0x0/0xae returned 0 after 976 usecs [ 10.629020] calling dccp_diag_init+0x0/0x39 @ 1 [ 10.634013] initcall dccp_diag_init+0x0/0x39 returned 0 after 0 usecs [ 10.640011] calling sctp_init+0x0/0x75b @ 1 [ 10.648245] SCTP: Hash tables configured (established 18724 bind 18724) [ 10.663330] sctp_init_sock(sk: ffff88003cc28000) [ 10.668041] initcall sctp_init+0x0/0x75b returned 0 after 22460 usecs [ 10.674013] calling lib80211_init+0x0/0x45 @ 1 [ 10.679011] lib80211: common routines for IEEE802.11 drivers [ 10.684087] lib80211_crypt: registered algorithm 'NULL' [ 10.690012] initcall lib80211_init+0x0/0x45 returned 0 after 10742 usecs [ 10.696012] calling lib80211_crypto_wep_init+0x0/0x39 @ 1 [ 10.702016] lib80211_crypt: registered algorithm 'WEP' [ 10.707015] initcall lib80211_crypto_wep_init+0x0/0x39 returned 0 after 4882 usecs [ 10.714012] calling lib80211_crypto_ccmp_init+0x0/0x39 @ 1 [ 10.720012] lib80211_crypt: registered algorithm 'CCMP' [ 10.725012] initcall lib80211_crypto_ccmp_init+0x0/0x39 returned 0 after 4882 usecs [ 10.733012] calling lib80211_crypto_tkip_init+0x0/0x39 @ 1 [ 10.739012] lib80211_crypt: registered algorithm 'TKIP' [ 10.744012] initcall lib80211_crypto_tkip_init+0x0/0x39 returned 0 after 4882 usecs [ 10.751016] calling rfkill_handler_init+0x0/0x6b @ 1 [ 10.756016] initcall rfkill_handler_init+0x0/0x6b returned 0 after 0 usecs [ 10.763012] calling dcbnl_init+0x0/0x59 @ 1 [ 10.768013] initcall dcbnl_init+0x0/0x59 returned 0 after 0 usecs [ 10.774012] calling wimax_subsys_init+0x0/0x220 @ 1 [ 10.783081] initcall wimax_subsys_init+0x0/0x220 returned 0 after 3906 usecs [ 10.790014] calling cpufreq_p4_init+0x0/0x82 @ 1 [ 10.794019] initcall cpufreq_p4_init+0x0/0x82 returned -19 after 0 usecs [ 10.801012] calling update_mp_table+0x0/0x245 @ 1 [ 10.806013] initcall update_mp_table+0x0/0x245 returned 0 after 0 usecs [ 10.812013] calling lapic_insert_resource+0x0/0x67 @ 1 [ 10.818015] initcall lapic_insert_resource+0x0/0x67 returned 0 after 0 usecs [ 10.825012] calling init_lapic_nmi_sysfs+0x0/0x60 @ 1 [ 10.830012] initcall init_lapic_nmi_sysfs+0x0/0x60 returned 0 after 0 usecs [ 10.837012] calling ioapic_insert_resources+0x0/0x81 @ 1 [ 10.842013] initcall ioapic_insert_resources+0x0/0x81 returned 0 after 0 usecs [ 10.849012] calling io_apic_bug_finalize+0x0/0x42 @ 1 [ 10.855013] initcall io_apic_bug_finalize+0x0/0x42 returned 0 after 0 usecs [ 10.862013] calling check_early_ioremap_leak+0x0/0x8e @ 1 [ 10.867012] initcall check_early_ioremap_leak+0x0/0x8e returned 0 after 0 usecs [ 10.874012] calling pat_memtype_list_init+0x0/0x50 @ 1 [ 10.880052] initcall pat_memtype_list_init+0x0/0x50 returned 0 after 0 usecs [ 10.887015] calling init_oops_id+0x0/0x58 @ 1 [ 10.891017] initcall init_oops_id+0x0/0x58 returned 0 after 0 usecs [ 10.897013] calling disable_boot_consoles+0x0/0x5f @ 1 [ 10.903013] initcall disable_boot_consoles+0x0/0x5f returned 0 after 0 usecs [ 10.910013] calling pm_qos_power_init+0x0/0xf0 @ 1 [ 10.916099] initcall pm_qos_power_init+0x0/0xf0 returned 0 after 976 usecs [ 10.922017] calling taskstats_init+0x0/0xbe @ 1 [ 10.927061] registered taskstats version 1 [ 10.931012] initcall taskstats_init+0x0/0xbe returned 0 after 3906 usecs [ 10.938013] calling fail_io_timeout_debugfs+0x0/0x32 @ 1 [ 10.943013] initcall fail_io_timeout_debugfs+0x0/0x32 returned -19 after 0 usecs [ 10.951013] calling random32_reseed+0x0/0xce @ 1 [ 10.955026] initcall random32_reseed+0x0/0xce returned 0 after 0 usecs [ 10.962012] calling pci_resource_alignment_sysfs_init+0x0/0x40 @ 1 [ 10.968031] initcall pci_resource_alignment_sysfs_init+0x0/0x40 returned 0 after 0 usecs [ 10.976012] calling pci_sysfs_init+0x0/0x77 @ 1 [ 10.981314] initcall pci_sysfs_init+0x0/0x77 returned 0 after 0 usecs [ 10.988013] calling boot_wait_for_devices+0x0/0x40 @ 1 [ 10.993012] initcall boot_wait_for_devices+0x0/0x40 returned 0 after 0 usecs [ 11.000012] calling regulator_init_complete+0x0/0x166 @ 1 [ 11.006013] initcall regulator_init_complete+0x0/0x166 returned 0 after 976 usecs [ 11.013015] calling seqgen_init+0x0/0x36 @ 1 [ 11.017032] initcall seqgen_init+0x0/0x36 returned 0 after 0 usecs [ 11.024013] calling hd_init+0x0/0x321 @ 1 [ 11.028115] hd: no drives specified - use hd=cyl,head,sectors on kernel command line [ 11.036100] initcall hd_init+0x0/0x321 returned -1 after 7812 usecs [ 11.042013] initcall hd_init+0x0/0x321 returned with error code -1 [ 11.048014] calling scsi_complete_async_scans+0x0/0x115 @ 1 [ 11.054013] initcall scsi_complete_async_scans+0x0/0x115 returned 0 after 0 usecs [ 11.061014] calling edd_init+0x0/0x227 @ 1 [ 11.065012] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 11.072212] initcall edd_init+0x0/0x227 returned 0 after 6835 usecs [ 11.078014] calling memmap_init+0x0/0xce @ 1 [ 11.082119] initcall memmap_init+0x0/0xce returned 0 after 0 usecs [ 11.089013] calling tcp_congestion_default+0x0/0x39 @ 1 [ 11.094014] initcall tcp_congestion_default+0x0/0x39 returned 0 after 0 usecs [ 11.101013] calling ip_auto_config+0x0/0x304 @ 1 [ 11.106036] initcall ip_auto_config+0x0/0x304 returned 0 after 0 usecs [ 11.112012] calling initialize_hashrnd+0x0/0x40 @ 1 [ 11.117016] initcall initialize_hashrnd+0x0/0x40 returned 0 after 0 usecs [ 11.124061] async_waiting @ 1 [ 11.127012] async_continuing @ 1 after 0 usec [ 11.132070] md: Waiting for all devices to be available before autodetect [ 11.138011] md: If you don't use raid, use raid=noautodetect [ 11.144011] async_waiting @ 1 [ 11.147011] async_continuing @ 1 after 0 usec [ 11.152299] md: Autodetecting RAID arrays. [ 11.156013] md: Scanned 0 and added 0 devices. [ 11.161014] md: autorun ... [ 11.163011] md: ... autorun DONE. [ 11.173994] EXT3-fs: INFO: recovery required on readonly filesystem. [ 11.180012] EXT3-fs: write access will be enabled during recovery. [ 11.203570] EXT3-fs: recovery complete. [ 11.207111] kjournald starting. Commit interval 5 seconds [ 11.213130] EXT3-fs: mounted filesystem with ordered data mode. [ 11.219095] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. [ 11.225106] async_waiting @ 1 [ 11.228012] async_continuing @ 1 after 0 usec [ 11.233012] debug: unmapping init memory ffffffff8256e000..ffffffff82636000 [ 11.240099] Write protecting the kernel read-only data: 17832k [ 11.246688] Testing CPA: undo ffffffff81009000-ffffffff82173000 [ 11.253373] Testing CPA: again [ 11.312649] Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist. [ 17.505263] ttyS0: 1 input overrun(s) [ 18.537568] ------------[ cut here ]------------ [ 18.539366] WARNING: at lib/dma-debug.c:812 check_unmap+0x395/0x5e6() [ 18.539366] Hardware name: System Product Name [ 18.539366] forcedeth 0000:00:0a.0: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000003b95296a] [size=90 bytes] [mapped as single] [unmapped as page] [ 18.539366] Pid: 4316, comm: ifup-eth Not tainted 2.6.30-rc8-tip-01994-g0c51e15-dirty #50306 [ 18.539366] Call Trace: [ 18.539366] <IRQ> [<ffffffff8146c4cc>] ? check_unmap+0x395/0x5e6 [ 18.539366] [<ffffffff8105ac13>] warn_slowpath_common+0x83/0xc6 [ 18.539366] [<ffffffff8105acd9>] warn_slowpath_fmt+0x4b/0x61 [ 18.539366] [<ffffffff8146c234>] ? check_unmap+0xfd/0x5e6 [ 18.539366] [<ffffffff8146c4cc>] check_unmap+0x395/0x5e6 [ 18.539366] [<ffffffff8146c99f>] debug_dma_unmap_page+0x5e/0x74 [ 18.539366] [<ffffffff816b1984>] nv_tx_done_optimized+0xb2/0x28a [ 18.539366] [<ffffffff81c9a5d2>] ? _spin_lock_irqsave+0x65/0x85 [ 18.539366] [<ffffffff816b5aa1>] nv_napi_poll+0x28b/0x2ca [ 18.539366] [<ffffffff81a91d03>] net_rx_action+0xbd/0x22b [ 18.539366] [<ffffffff81a91e0b>] ? net_rx_action+0x1c5/0x22b [ 18.539366] [<ffffffff810a5015>] ? __rcu_process_callbacks+0x163/0x216 [ 18.539366] [<ffffffff8106147b>] __do_softirq+0x85/0x136 [ 18.539366] [<ffffffff81058362>] ? copy_signal+0x6b/0x39f [ 18.539366] [<ffffffff8101536c>] call_softirq+0x1c/0x30 [ 18.539366] [<ffffffff8101752d>] do_softirq+0x51/0xae [ 18.539366] [<ffffffff81081a6d>] ? tick_handle_periodic+0x30/0x97 [ 18.539366] [<ffffffff81061081>] irq_exit+0x52/0xaf [ 18.539366] [<ffffffff81030fff>] smp_apic_timer_interrupt+0x9b/0xc1 [ 18.539366] [<ffffffff81014d53>] apic_timer_interrupt+0x13/0x20 [ 18.539366] <EOI> [<ffffffff810e5ac4>] ? kmem_cache_alloc+0x8b/0xcb [ 18.539366] [<ffffffff81058362>] ? copy_signal+0x6b/0x39f [ 18.539366] [<ffffffff811130eb>] ? copy_fs_struct+0xaf/0xd1 [ 18.539366] [<ffffffff810597f2>] ? copy_process+0x580/0xd99 [ 18.539366] [<ffffffff8105a174>] ? do_fork+0x169/0x33a [ 18.539366] [<ffffffff81457c69>] ? __up_read+0x8f/0xb0 [ 18.539366] [<ffffffff81078f3a>] ? up_read+0x35/0x50 [ 18.539366] [<ffffffff810af5bc>] ? perf_swcounter_event+0x30/0x46 [ 18.539366] [<ffffffff8101264d>] ? sys_clone+0x37/0x52 [ 18.539366] [<ffffffff810144f3>] ? stub_clone+0x13/0x20 [ 18.539366] [<ffffffff81014182>] ? system_call_fastpath+0x16/0x1b [ 18.539366] ---[ end trace 1d4adcfbc3df3215 ]--- [ 18.539366] Mapped at: [ 18.539366] [<ffffffff8146ceb0>] debug_dma_map_page+0x8b/0x1b9 [ 18.539366] [<ffffffff816b0eb0>] nv_start_xmit_optimized+0x2a2/0x6c5 [ 18.539366] [<ffffffff81a9503b>] dev_hard_start_xmit+0xd9/0x163 [ 18.539366] [<ffffffff81ab0a12>] __qdisc_run+0xfc/0x223 [ 18.539366] [<ffffffff81a95483>] dev_queue_xmit+0x284/0x3d4 [ 18.544082] ttyS0: 2 input overrun(s) [ 18.639248] eth1: link down [ 18.642331] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 19.915513] IPv4 FIB: Using LC-trie version 0.408 [ 19.917074] ttyS0: 32 input overrun(s) [ 29.483023] eth0: no IPv6 routers present [ 29.487103] ttyS0: 2 input overrun(s) [ 29.856572] EXT3 FS on sda6, internal journal [ 29.972720] kjournald starting. Commit interval 5 seconds [ 29.978114] EXT3 FS on sda5, internal journal [ 29.986131] EXT3-fs: mounted filesystem with ordered data mode. [ 31.319070] CPA self-test: [ 31.330993] 4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0 [ 31.353988] 4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0 [ 31.375981] 4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0 [ 31.384125] ok. [ 32.783813] warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) [ 32.785428] ttyS0: 6 input overrun(s) [ 35.925082] CPU 1 is now offline [ 35.926083] lockdep: fixing up alternatives. [ 35.927081] SMP alternatives: switching to UP code [ 35.939104] ttyS0: 2 input overrun(s) [ 35.991548] lockdep: fixing up alternatives. [ 35.992132] SMP alternatives: switching to SMP code [ 36.003356] Booting processor 1 APIC 0x1 ip 0x6000 [ 35.938408] Initializing CPU#1 [ 35.938408] masked ExtINT on CPU#1 [ 35.938408] Calibrating delay using timer specific routine.. 4020.05 BogoMIPS (lpj=2010028) [ 35.938408] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 35.938408] CPU: L2 Cache: 512K (64 bytes/line) [ 35.938408] CPU 1/0x1 -> Node 0 [ 35.938408] CPU: Physical Processor ID: 0 [ 35.938408] CPU: Processor Core ID: 1 [ 35.938408] mce: CPU supports 5 MCE banks [ 35.938408] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 36.075641] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 36.129106] CPU 1 is now offline [ 36.130130] lockdep: fixing up alternatives. [ 36.131082] SMP alternatives: switching to UP code [ 36.176677] lockdep: fixing up alternatives. [ 36.177133] SMP alternatives: switching to SMP code [ 36.187792] Booting processor 1 APIC 0x1 ip 0x6000 [ 36.147275] Initializing CPU#1 [ 36.147275] masked ExtINT on CPU#1 [ 36.147275] Calibrating delay using timer specific routine.. 4019.79 BogoMIPS (lpj=2009899) [ 36.147275] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 36.147275] CPU: L2 Cache: 512K (64 bytes/line) [ 36.147275] CPU 1/0x1 -> Node 0 [ 36.147275] CPU: Physical Processor ID: 0 [ 36.147275] CPU: Processor Core ID: 1 [ 36.147275] mce: CPU supports 5 MCE banks [ 36.147275] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 36.300291] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
# # Automatically generated make config: don't edit # Linux kernel version: 2.6.30-rc8 # Sun Jun 7 11:52:01 2009 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_GPIO=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y CONFIG_X86_TRAMPOLINE=y # CONFIG_KTIME_SCALAR is not set CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# # General setup # CONFIG_EXPERIMENTAL=y # CONFIG_BROKEN_BOOT_ALLOWED4 is not set CONFIG_BROKEN_BOOT_EUROPE=y CONFIG_BROKEN_BOOT_TITAN=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y # CONFIG_KERNEL_GZIP is not set CONFIG_KERNEL_BZIP2=y # CONFIG_KERNEL_LZMA is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y # CONFIG_TASK_DELAY_ACCT is not set CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y # CONFIG_AUDIT is not set
# # RCU Subsystem # CONFIG_CLASSIC_RCU=y # CONFIG_TREE_RCU is not set # CONFIG_PREEMPT_RCU is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=20 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set CONFIG_RT_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_CGROUPS=y CONFIG_CGROUP_DEBUG=y CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y CONFIG_PROC_PID_CPUSET=y # CONFIG_CGROUP_CPUACCT is not set # CONFIG_RESOURCE_COUNTERS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y CONFIG_USER_NS=y CONFIG_PID_NS=y CONFIG_NET_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_STRIP_ASM_SYMS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_COUNTERS=y
# # Performance Counters # CONFIG_PERF_COUNTERS=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y # CONFIG_MARKERS is not set # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y
# # IO Schedulers # CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_AS is not set CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_FREEZER=y
# # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP_SUPPORT=y # CONFIG_SPARSE_IRQ is not set CONFIG_X86_MPPARSE=y CONFIG_X86_EXTENDED_PLATFORM=y # CONFIG_X86_VSMP is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_PARAVIRT_GUEST=y CONFIG_XEN=y CONFIG_XEN_MAX_DOMAIN_MEMORY=32 CONFIG_XEN_SAVE_RESTORE=y CONFIG_XEN_DEBUG_FS=y CONFIG_KVM_CLOCK=y CONFIG_KVM_GUEST=y CONFIG_PARAVIRT=y CONFIG_PARAVIRT_SPINLOCKS=y CONFIG_PARAVIRT_CLOCK=y CONFIG_PARAVIRT_DEBUG=y CONFIG_MEMTEST=y # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set CONFIG_GENERIC_CPU=y CONFIG_X86_CPU=y CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_X86_DS=y CONFIG_X86_PTRACE_BTS=y CONFIG_HPET_TIMER=y CONFIG_DMI=y CONFIG_GART_IOMMU=y CONFIG_CALGARY_IOMMU=y # CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT is not set CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y # CONFIG_IOMMU_API is not set CONFIG_MAXSMP=y CONFIG_NR_CPUS=4096 # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=y CONFIG_X86_NEW_MCE=y CONFIG_X86_MCE_INTEL=y # CONFIG_X86_MCE_AMD is not set CONFIG_X86_MCE_THRESHOLD=y # CONFIG_X86_MCE_INJECT is not set CONFIG_X86_THERMAL_VECTOR=y CONFIG_I8K=y CONFIG_MICROCODE=y # CONFIG_MICROCODE_INTEL is not set # CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_X86_CPU_DEBUG=y CONFIG_UP_WANTED_1=y # CONFIG_UP_WANTED_2 is not set CONFIG_SMP=y CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y CONFIG_NUMA=y # CONFIG_K8_NUMA is not set CONFIG_NUMA_EMU=y CONFIG_NODES_SHIFT=9 CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y # CONFIG_SPARSEMEM_VMEMMAP is not set CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y # CONFIG_UNEVICTABLE_LRU is not set CONFIG_HAVE_MLOCK=y # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW_64K=y CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y CONFIG_SECCOMP=y CONFIG_CC_STACKPROTECTOR_ALL=y CONFIG_CC_STACKPROTECTOR=y # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y CONFIG_PHYSICAL_START=0x1000000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y CONFIG_COMPAT_VDSO=y # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
# # Power management and ACPI options # CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_ACPI is not set
# # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y # CONFIG_CPU_FREQ_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# # CPUFreq processor drivers # CONFIG_X86_P4_CLOCKMOD=y
# # shared options # CONFIG_X86_SPEEDSTEP_LIB=y CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y
# # Memory power savings # # CONFIG_I7300_IDLE is not set
# # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set CONFIG_PCI_STUB=y CONFIG_HT_IRQ=y # CONFIG_PCI_IOV is not set CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set # CONFIG_PCMCIA is not set CONFIG_CARDBUS=y
# # PC-card bridges # CONFIG_YENTA=y CONFIG_YENTA_O2=y CONFIG_YENTA_RICOH=y CONFIG_YENTA_TI=y CONFIG_YENTA_ENE_TUNE=y CONFIG_YENTA_TOSHIBA=y CONFIG_PCCARD_NONSTATIC=y # CONFIG_HOTPLUG_PCI is not set
# # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y CONFIG_IA32_EMULATION=y # CONFIG_IA32_AOUT is not set CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_NET=y
# # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y CONFIG_XFRM_SUB_POLICY=y CONFIG_XFRM_MIGRATE=y CONFIG_XFRM_STATISTICS=y CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y # CONFIG_ASK_IP_FIB_HASH is not set CONFIG_IP_FIB_TRIE=y # CONFIG_IP_FIB_HASH is not set # CONFIG_IP_FIB_TRIE_STATS is not set CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y # CONFIG_IP_PNP_DHCP is not set CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=y CONFIG_NET_IPGRE=y # CONFIG_NET_IPGRE_BROADCAST is not set CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y CONFIG_ARPD=y CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set CONFIG_INET_ESP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y CONFIG_IPV6=y CONFIG_IPV6_PRIVACY=y # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set CONFIG_IPV6_MIP6=y # CONFIG_INET6_XFRM_TUNNEL is not set CONFIG_INET6_TUNNEL=y # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set # CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set # CONFIG_IPV6_SIT is not set CONFIG_IPV6_TUNNEL=y # CONFIG_IPV6_MULTIPLE_TABLES is not set CONFIG_IPV6_MROUTE=y # CONFIG_IPV6_PIMSM_V2 is not set CONFIG_NETLABEL=y CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y CONFIG_BRIDGE_NETFILTER=y
# # Core Netfilter Configuration # CONFIG_NETFILTER_NETLINK=y # CONFIG_NETFILTER_NETLINK_QUEUE is not set CONFIG_NETFILTER_NETLINK_LOG=y CONFIG_NF_CONNTRACK=y CONFIG_NF_CT_ACCT=y CONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CT_PROTO_DCCP=y CONFIG_NF_CT_PROTO_GRE=y CONFIG_NF_CT_PROTO_SCTP=y CONFIG_NF_CT_PROTO_UDPLITE=y # CONFIG_NF_CONNTRACK_AMANDA is not set # CONFIG_NF_CONNTRACK_FTP is not set # CONFIG_NF_CONNTRACK_H323 is not set CONFIG_NF_CONNTRACK_IRC=y CONFIG_NF_CONNTRACK_NETBIOS_NS=y CONFIG_NF_CONNTRACK_PPTP=y CONFIG_NF_CONNTRACK_SANE=y # CONFIG_NF_CONNTRACK_SIP is not set CONFIG_NF_CONNTRACK_TFTP=y CONFIG_NF_CT_NETLINK=y CONFIG_NETFILTER_XTABLES=y # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set CONFIG_NETFILTER_XT_TARGET_CONNMARK=y # CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set CONFIG_NETFILTER_XT_TARGET_DSCP=y CONFIG_NETFILTER_XT_TARGET_HL=y CONFIG_NETFILTER_XT_TARGET_LED=y CONFIG_NETFILTER_XT_TARGET_MARK=y CONFIG_NETFILTER_XT_TARGET_NFLOG=y CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y CONFIG_NETFILTER_XT_TARGET_NOTRACK=y CONFIG_NETFILTER_XT_TARGET_RATEEST=y CONFIG_NETFILTER_XT_TARGET_TRACE=y # CONFIG_NETFILTER_XT_TARGET_SECMARK is not set CONFIG_NETFILTER_XT_TARGET_TCPMSS=y CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=y CONFIG_NETFILTER_XT_MATCH_CLUSTER=y CONFIG_NETFILTER_XT_MATCH_COMMENT=y CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y CONFIG_NETFILTER_XT_MATCH_CONNMARK=y # CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set CONFIG_NETFILTER_XT_MATCH_DCCP=y # CONFIG_NETFILTER_XT_MATCH_DSCP is not set CONFIG_NETFILTER_XT_MATCH_ESP=y # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_HELPER is not set CONFIG_NETFILTER_XT_MATCH_HL=y # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set CONFIG_NETFILTER_XT_MATCH_LENGTH=y # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y # CONFIG_NETFILTER_XT_MATCH_OWNER is not set CONFIG_NETFILTER_XT_MATCH_POLICY=y CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set # CONFIG_NETFILTER_XT_MATCH_RECENT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=y # CONFIG_NETFILTER_XT_MATCH_STATE is not set CONFIG_NETFILTER_XT_MATCH_STATISTIC=y CONFIG_NETFILTER_XT_MATCH_STRING=y # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set CONFIG_NETFILTER_XT_MATCH_TIME=y CONFIG_NETFILTER_XT_MATCH_U32=y CONFIG_IP_VS=y # CONFIG_IP_VS_IPV6 is not set # CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12
# # IPVS transport protocol load balancing support # # CONFIG_IP_VS_PROTO_TCP is not set # CONFIG_IP_VS_PROTO_UDP is not set CONFIG_IP_VS_PROTO_AH_ESP=y CONFIG_IP_VS_PROTO_ESP=y CONFIG_IP_VS_PROTO_AH=y
# # IPVS scheduler # # CONFIG_IP_VS_RR is not set CONFIG_IP_VS_WRR=y # CONFIG_IP_VS_LC is not set CONFIG_IP_VS_WLC=y # CONFIG_IP_VS_LBLC is not set CONFIG_IP_VS_LBLCR=y # CONFIG_IP_VS_DH is not set CONFIG_IP_VS_SH=y CONFIG_IP_VS_SED=y CONFIG_IP_VS_NQ=y
# # IPVS application helper #
# # IP: Netfilter Configuration # CONFIG_NF_DEFRAG_IPV4=y CONFIG_NF_CONNTRACK_IPV4=y # CONFIG_NF_CONNTRACK_PROC_COMPAT is not set CONFIG_IP_NF_QUEUE=y # CONFIG_IP_NF_IPTABLES is not set CONFIG_IP_NF_ARPTABLES=y CONFIG_IP_NF_ARPFILTER=y CONFIG_IP_NF_ARP_MANGLE=y
# # IPv6: Netfilter Configuration # CONFIG_NF_CONNTRACK_IPV6=y CONFIG_IP6_NF_QUEUE=y CONFIG_IP6_NF_IPTABLES=y # CONFIG_IP6_NF_MATCH_AH is not set # CONFIG_IP6_NF_MATCH_EUI64 is not set CONFIG_IP6_NF_MATCH_FRAG=y CONFIG_IP6_NF_MATCH_OPTS=y CONFIG_IP6_NF_MATCH_HL=y # CONFIG_IP6_NF_MATCH_IPV6HEADER is not set # CONFIG_IP6_NF_MATCH_MH is not set CONFIG_IP6_NF_MATCH_RT=y # CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_TARGET_LOG=y # CONFIG_IP6_NF_FILTER is not set CONFIG_IP6_NF_MANGLE=y CONFIG_IP6_NF_RAW=y # CONFIG_IP6_NF_SECURITY is not set
# # DECnet: Netfilter Configuration # # CONFIG_DECNET_NF_GRABULATOR is not set CONFIG_BRIDGE_NF_EBTABLES=y CONFIG_BRIDGE_EBT_BROUTE=y CONFIG_BRIDGE_EBT_T_FILTER=y CONFIG_BRIDGE_EBT_T_NAT=y CONFIG_BRIDGE_EBT_802_3=y # CONFIG_BRIDGE_EBT_AMONG is not set CONFIG_BRIDGE_EBT_ARP=y CONFIG_BRIDGE_EBT_IP=y CONFIG_BRIDGE_EBT_IP6=y CONFIG_BRIDGE_EBT_LIMIT=y CONFIG_BRIDGE_EBT_MARK=y CONFIG_BRIDGE_EBT_PKTTYPE=y # CONFIG_BRIDGE_EBT_STP is not set # CONFIG_BRIDGE_EBT_VLAN is not set # CONFIG_BRIDGE_EBT_ARPREPLY is not set CONFIG_BRIDGE_EBT_DNAT=y # CONFIG_BRIDGE_EBT_MARK_T is not set CONFIG_BRIDGE_EBT_REDIRECT=y CONFIG_BRIDGE_EBT_SNAT=y CONFIG_BRIDGE_EBT_LOG=y # CONFIG_BRIDGE_EBT_ULOG is not set CONFIG_BRIDGE_EBT_NFLOG=y CONFIG_IP_DCCP=y CONFIG_INET_DCCP_DIAG=y
# # DCCP CCIDs Configuration (EXPERIMENTAL) # CONFIG_IP_DCCP_CCID2_DEBUG=y CONFIG_IP_DCCP_CCID3=y CONFIG_IP_DCCP_CCID3_DEBUG=y CONFIG_IP_DCCP_CCID3_RTO=100 CONFIG_IP_DCCP_TFRC_LIB=y CONFIG_IP_DCCP_TFRC_DEBUG=y
# # DCCP Kernel Hacking # CONFIG_IP_DCCP_DEBUG=y CONFIG_IP_SCTP=y CONFIG_SCTP_DBG_MSG=y CONFIG_SCTP_DBG_OBJCNT=y # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set CONFIG_STP=y CONFIG_BRIDGE=y CONFIG_NET_DSA=y CONFIG_NET_DSA_TAG_DSA=y CONFIG_NET_DSA_TAG_EDSA=y CONFIG_NET_DSA_TAG_TRAILER=y CONFIG_NET_DSA_MV88E6XXX=y CONFIG_NET_DSA_MV88E6060=y CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y CONFIG_NET_DSA_MV88E6131=y CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_VLAN_8021Q=y # CONFIG_VLAN_8021Q_GVRP is not set CONFIG_DECNET=y CONFIG_DECNET_ROUTER=y CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set CONFIG_ATALK=y CONFIG_DEV_APPLETALK=y CONFIG_IPDDP=y # CONFIG_IPDDP_ENCAP is not set CONFIG_IPDDP_DECAP=y # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set CONFIG_WAN_ROUTER=y CONFIG_PHONET=y CONFIG_NET_SCHED=y
# # Queueing/Scheduling # CONFIG_NET_SCH_CBQ=y CONFIG_NET_SCH_HTB=y # CONFIG_NET_SCH_HFSC is not set # CONFIG_NET_SCH_PRIO is not set # CONFIG_NET_SCH_MULTIQ is not set CONFIG_NET_SCH_RED=y CONFIG_NET_SCH_SFQ=y # CONFIG_NET_SCH_TEQL is not set CONFIG_NET_SCH_TBF=y CONFIG_NET_SCH_GRED=y CONFIG_NET_SCH_DSMARK=y CONFIG_NET_SCH_NETEM=y CONFIG_NET_SCH_DRR=y CONFIG_NET_SCH_INGRESS=y
# # Classification # CONFIG_NET_CLS=y # CONFIG_NET_CLS_BASIC is not set # CONFIG_NET_CLS_TCINDEX is not set CONFIG_NET_CLS_ROUTE4=y CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=y # CONFIG_NET_CLS_U32 is not set CONFIG_NET_CLS_RSVP=y # CONFIG_NET_CLS_RSVP6 is not set CONFIG_NET_CLS_FLOW=y CONFIG_NET_CLS_CGROUP=y # CONFIG_NET_EMATCH is not set CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=y CONFIG_NET_ACT_GACT=y CONFIG_GACT_PROB=y # CONFIG_NET_ACT_MIRRED is not set # CONFIG_NET_ACT_NAT is not set CONFIG_NET_ACT_PEDIT=y CONFIG_NET_ACT_SIMP=y # CONFIG_NET_ACT_SKBEDIT is not set CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y CONFIG_DCB=y
# # Network testing # CONFIG_NET_PKTGEN=y CONFIG_HAMRADIO=y
# # Packet Radio protocols # # CONFIG_AX25 is not set # CONFIG_CAN is not set CONFIG_IRDA=y
# # IrDA protocols # # CONFIG_IRLAN is not set CONFIG_IRCOMM=y # CONFIG_IRDA_ULTRA is not set
# # IrDA options # CONFIG_IRDA_CACHE_LAST_LSAP=y # CONFIG_IRDA_FAST_RR is not set # CONFIG_IRDA_DEBUG is not set
# # Infrared-port device drivers #
# # SIR device drivers # CONFIG_IRTTY_SIR=y
# # Dongle support # CONFIG_DONGLE=y # CONFIG_ESI_DONGLE is not set # CONFIG_ACTISYS_DONGLE is not set CONFIG_TEKRAM_DONGLE=y CONFIG_TOIM3232_DONGLE=y # CONFIG_LITELINK_DONGLE is not set # CONFIG_MA600_DONGLE is not set CONFIG_GIRBIL_DONGLE=y # CONFIG_MCP2120_DONGLE is not set CONFIG_OLD_BELKIN_DONGLE=y # CONFIG_ACT200L_DONGLE is not set # CONFIG_KINGSUN_DONGLE is not set CONFIG_KSDAZZLE_DONGLE=y # CONFIG_KS959_DONGLE is not set
# # FIR device drivers # CONFIG_USB_IRDA=y CONFIG_SIGMATEL_FIR=y CONFIG_NSC_FIR=y CONFIG_WINBOND_FIR=y # CONFIG_SMC_IRCC_FIR is not set CONFIG_ALI_FIR=y CONFIG_VLSI_FIR=y # CONFIG_VIA_FIR is not set # CONFIG_MCS_FIR is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=y CONFIG_LIB80211_CRYPT_WEP=y CONFIG_LIB80211_CRYPT_CCMP=y CONFIG_LIB80211_CRYPT_TKIP=y CONFIG_LIB80211_DEBUG=y # CONFIG_MAC80211 is not set CONFIG_WIMAX=y CONFIG_WIMAX_DEBUG_LEVEL=8 CONFIG_RFKILL=y CONFIG_RFKILL_INPUT=y CONFIG_RFKILL_LEDS=y
# # Device Drivers #
# # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set CONFIG_DEBUG_DEVRES=y # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y # CONFIG_PROC_EVENTS is not set CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_SERIAL=y CONFIG_PARPORT_PC_FIFO=y # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_GSC is not set CONFIG_PARPORT_AX88796=y # CONFIG_PARPORT_1284 is not set CONFIG_PARPORT_NOT_PC=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_FD=y CONFIG_BLK_CPQ_DA=y # CONFIG_BLK_CPQ_CISS_DA is not set CONFIG_BLK_DEV_DAC960=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_SX8=y # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=y CONFIG_XEN_BLKDEV_FRONTEND=y CONFIG_BLK_DEV_HD=y # CONFIG_MISC_DEVICES is not set CONFIG_TIFM_CORE=y CONFIG_HAVE_IDE=y
# # SCSI device support # CONFIG_RAID_ATTRS=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=y CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y
# # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=y
# # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set
# # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_FC_TGT_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=y CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_SCSI_AIC7XXX=y CONFIG_SCSI_DH=y CONFIG_SCSI_DH_RDAC=y # CONFIG_SCSI_DH_HP_SW is not set CONFIG_SCSI_DH_EMC=y CONFIG_SCSI_DH_ALUA=y CONFIG_SCSI_OSD_INITIATOR=y CONFIG_SCSI_OSD_ULD=y CONFIG_SCSI_OSD_DPRINT_SENSE=1 # CONFIG_SCSI_OSD_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_PMP is not set CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set CONFIG_ATA_SFF=y CONFIG_SATA_SVW=y CONFIG_ATA_PIIX=y CONFIG_SATA_MV=y CONFIG_SATA_NV=y CONFIG_PDC_ADMA=y CONFIG_SATA_QSTOR=y CONFIG_SATA_PROMISE=y CONFIG_SATA_SX4=y CONFIG_SATA_SIL=y # CONFIG_SATA_SIS is not set CONFIG_SATA_ULI=y # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ALI is not set CONFIG_PATA_AMD=y # CONFIG_PATA_ARTOP is not set CONFIG_PATA_ATIIXP=y # CONFIG_PATA_CMD640_PCI is not set CONFIG_PATA_CMD64X=y # CONFIG_PATA_CS5520 is not set CONFIG_PATA_CS5530=y CONFIG_PATA_CYPRESS=y CONFIG_PATA_EFAR=y CONFIG_ATA_GENERIC=y # CONFIG_PATA_HPT366 is not set CONFIG_PATA_HPT37X=y CONFIG_PATA_HPT3X2N=y CONFIG_PATA_HPT3X3=y # CONFIG_PATA_HPT3X3_DMA is not set CONFIG_PATA_IT821X=y # CONFIG_PATA_IT8213 is not set CONFIG_PATA_JMICRON=y # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set CONFIG_PATA_MPIIX=y CONFIG_PATA_OLDPIIX=y # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NINJA32 is not set CONFIG_PATA_NS87410=y CONFIG_PATA_NS87415=y # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set CONFIG_PATA_PDC_OLD=y CONFIG_PATA_RADISYS=y # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set CONFIG_PATA_SERVERWORKS=y CONFIG_PATA_PDC2027X=y CONFIG_PATA_SIL680=y CONFIG_PATA_SIS=y CONFIG_PATA_VIA=y CONFIG_PATA_WINBOND=y CONFIG_PATA_SCH=y CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=y # CONFIG_MD_RAID456 is not set CONFIG_MD_MULTIPATH=y # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set CONFIG_DM_CRYPT=y CONFIG_DM_SNAPSHOT=y CONFIG_DM_MIRROR=y CONFIG_DM_ZERO=y # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=y CONFIG_FUSION_SAS=y CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=y CONFIG_FUSION_LAN=y # CONFIG_FUSION_LOGGING is not set
# # IEEE 1394 (FireWire) support #
# # Enable only one of the two stacks, unless you know what you are doing # CONFIG_FIREWIRE=y CONFIG_FIREWIRE_OHCI=y CONFIG_FIREWIRE_OHCI_DEBUG=y CONFIG_FIREWIRE_SBP2=y # CONFIG_IEEE1394 is not set CONFIG_I2O=y CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y CONFIG_I2O_EXT_ADAPTEC=y CONFIG_I2O_EXT_ADAPTEC_DMA64=y CONFIG_I2O_BUS=y CONFIG_I2O_BLOCK=y CONFIG_I2O_SCSI=y CONFIG_I2O_PROC=y # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_IFB=y # CONFIG_DUMMY is not set CONFIG_BONDING=y CONFIG_MACVLAN=y CONFIG_EQUALIZER=y CONFIG_TUN=y CONFIG_VETH=y # CONFIG_ARCNET is not set CONFIG_PHYLIB=y
# # MII PHY device drivers # # CONFIG_MARVELL_PHY is not set CONFIG_DAVICOM_PHY=y # CONFIG_QSEMI_PHY is not set CONFIG_LXT_PHY=y CONFIG_CICADA_PHY=y # CONFIG_VITESSE_PHY is not set CONFIG_SMSC_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y # CONFIG_REALTEK_PHY is not set # CONFIG_NATIONAL_PHY is not set CONFIG_STE10XP=y CONFIG_LSI_ET1011C_PHY=y # CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=y CONFIG_MDIO_GPIO=y CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_HAPPYMEAL=y CONFIG_SUNGEM=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set CONFIG_VORTEX=y CONFIG_ENC28J60=y CONFIG_ENC28J60_WRITEVERIFY=y # CONFIG_ETHOC is not set CONFIG_DNET=y # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set CONFIG_AMD8111_ETH=y CONFIG_ADAPTEC_STARFIRE=y CONFIG_B44=y CONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=y CONFIG_FORCEDETH=y CONFIG_FORCEDETH_NAPI=y CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set CONFIG_NE2K_PCI=y CONFIG_8139CP=y CONFIG_8139TOO=y # CONFIG_8139TOO_PIO is not set CONFIG_8139TOO_TUNE_TWISTER=y # CONFIG_8139TOO_8129 is not set CONFIG_8139_OLD_RX_RESET=y CONFIG_R6040=y # CONFIG_SIS900 is not set CONFIG_EPIC100=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set CONFIG_TLAN=y # CONFIG_VIA_RHINE is not set CONFIG_SC92031=y CONFIG_NET_POCKET=y # CONFIG_ATP is not set CONFIG_DE600=y CONFIG_DE620=y CONFIG_ATL2=y CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set CONFIG_E1000E=y CONFIG_IP1000=y CONFIG_IGB=y # CONFIG_IGB_DCA is not set # CONFIG_IGBVF is not set CONFIG_NS83820=y CONFIG_HAMACHI=y CONFIG_YELLOWFIN=y # CONFIG_R8169 is not set CONFIG_SIS190=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y CONFIG_BNX2=y CONFIG_QLA3XXX=y CONFIG_ATL1=y CONFIG_ATL1E=y # CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y CONFIG_CHELSIO_T1=y CONFIG_CHELSIO_T1_1G=y CONFIG_CHELSIO_T3_DEPENDS=y CONFIG_CHELSIO_T3=y CONFIG_ENIC=y CONFIG_IXGBE=y CONFIG_IXGBE_DCA=y CONFIG_IXGBE_DCB=y CONFIG_IXGB=y CONFIG_S2IO=y CONFIG_MYRI10GE=y CONFIG_MYRI10GE_DCA=y CONFIG_NIU=y # CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set CONFIG_BNX2X=y CONFIG_QLGE=y CONFIG_SFC=y # CONFIG_BE2NET is not set # CONFIG_TR is not set
# # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set CONFIG_WLAN_80211=y CONFIG_LIBERTAS=y CONFIG_LIBERTAS_USB=y CONFIG_LIBERTAS_SDIO=y CONFIG_LIBERTAS_SPI=y CONFIG_LIBERTAS_DEBUG=y CONFIG_AIRO=y # CONFIG_ATMEL is not set CONFIG_PRISM54=y CONFIG_USB_ZD1201=y CONFIG_USB_NET_RNDIS_WLAN=y CONFIG_IPW2100=y CONFIG_IPW2100_MONITOR=y CONFIG_IPW2100_DEBUG=y CONFIG_IPW2200=y CONFIG_IPW2200_MONITOR=y CONFIG_IPW2200_RADIOTAP=y CONFIG_IPW2200_PROMISCUOUS=y CONFIG_IPW2200_QOS=y CONFIG_IPW2200_DEBUG=y CONFIG_LIBIPW=y # CONFIG_LIBIPW_DEBUG is not set CONFIG_HOSTAP=y CONFIG_HOSTAP_FIRMWARE=y # CONFIG_HOSTAP_FIRMWARE_NVRAM is not set # CONFIG_HOSTAP_PLX is not set CONFIG_HOSTAP_PCI=y CONFIG_HERMES=y CONFIG_HERMES_CACHE_FW_ON_INIT=y CONFIG_PLX_HERMES=y # CONFIG_TMD_HERMES is not set CONFIG_NORTEL_HERMES=y CONFIG_PCI_HERMES=y
# # WiMAX Wireless Broadband devices # CONFIG_WIMAX_I2400M=y CONFIG_WIMAX_I2400M_SDIO=y CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
# # USB Network Adapters # CONFIG_USB_CATC=y CONFIG_USB_KAWETH=y CONFIG_USB_PEGASUS=y CONFIG_USB_RTL8150=y CONFIG_USB_USBNET=y CONFIG_USB_NET_AX8817X=y CONFIG_USB_NET_CDCETHER=y # CONFIG_USB_NET_CDC_EEM is not set # CONFIG_USB_NET_DM9601 is not set CONFIG_USB_NET_SMSC95XX=y # CONFIG_USB_NET_GL620A is not set CONFIG_USB_NET_NET1080=y CONFIG_USB_NET_PLUSB=y # CONFIG_USB_NET_MCS7830 is not set CONFIG_USB_NET_RNDIS_HOST=y CONFIG_USB_NET_CDC_SUBSET=y CONFIG_USB_ALI_M5632=y # CONFIG_USB_AN2720 is not set CONFIG_USB_BELKIN=y # CONFIG_USB_ARMLINUX is not set CONFIG_USB_EPSON2888=y CONFIG_USB_KC2190=y CONFIG_USB_NET_ZAURUS=y CONFIG_USB_HSO=y # CONFIG_WAN is not set # CONFIG_XEN_NETDEV_FRONTEND is not set CONFIG_FDDI=y CONFIG_DEFXX=y # CONFIG_DEFXX_MMIO is not set # CONFIG_SKFP is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set CONFIG_NET_FC=y CONFIG_NETCONSOLE=y # CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set # CONFIG_PHONE is not set
# # Input device support # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_POLLDEV=y
# # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=y # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set
# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y CONFIG_KEYBOARD_SUNKBD=y CONFIG_KEYBOARD_LKKBD=y # CONFIG_KEYBOARD_XTKBD is not set CONFIG_KEYBOARD_NEWTON=y CONFIG_KEYBOARD_STOWAWAY=y CONFIG_KEYBOARD_GPIO=y CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=y CONFIG_MOUSE_APPLETOUCH=y CONFIG_MOUSE_BCM5974=y CONFIG_MOUSE_VSXXXAA=y # CONFIG_MOUSE_GPIO is not set CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=y CONFIG_JOYSTICK_A3D=y CONFIG_JOYSTICK_ADI=y CONFIG_JOYSTICK_COBRA=y CONFIG_JOYSTICK_GF2K=y CONFIG_JOYSTICK_GRIP=y CONFIG_JOYSTICK_GRIP_MP=y CONFIG_JOYSTICK_GUILLEMOT=y # CONFIG_JOYSTICK_INTERACT is not set CONFIG_JOYSTICK_SIDEWINDER=y CONFIG_JOYSTICK_TMDC=y CONFIG_JOYSTICK_IFORCE=y CONFIG_JOYSTICK_IFORCE_USB=y CONFIG_JOYSTICK_IFORCE_232=y CONFIG_JOYSTICK_WARRIOR=y # CONFIG_JOYSTICK_MAGELLAN is not set CONFIG_JOYSTICK_SPACEORB=y # CONFIG_JOYSTICK_SPACEBALL is not set CONFIG_JOYSTICK_STINGER=y CONFIG_JOYSTICK_TWIDJOY=y CONFIG_JOYSTICK_ZHENHUA=y CONFIG_JOYSTICK_DB9=y CONFIG_JOYSTICK_GAMECON=y CONFIG_JOYSTICK_TURBOGRAFX=y CONFIG_JOYSTICK_JOYDUMP=y CONFIG_JOYSTICK_XPAD=y CONFIG_JOYSTICK_XPAD_FF=y # CONFIG_JOYSTICK_XPAD_LEDS is not set CONFIG_JOYSTICK_WALKERA0701=y CONFIG_INPUT_TABLET=y # CONFIG_TABLET_USB_ACECAD is not set CONFIG_TABLET_USB_AIPTEK=y CONFIG_TABLET_USB_GTCO=y CONFIG_TABLET_USB_KBTAB=y CONFIG_TABLET_USB_WACOM=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y CONFIG_TOUCHSCREEN_AD7877=y CONFIG_TOUCHSCREEN_AD7879_I2C=y CONFIG_TOUCHSCREEN_AD7879=y CONFIG_TOUCHSCREEN_FUJITSU=y # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set CONFIG_TOUCHSCREEN_MTOUCH=y CONFIG_TOUCHSCREEN_INEXIO=y CONFIG_TOUCHSCREEN_MK712=y CONFIG_TOUCHSCREEN_PENMOUNT=y # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set CONFIG_TOUCHSCREEN_USB_COMPOSITE=y CONFIG_TOUCHSCREEN_USB_EGALAX=y CONFIG_TOUCHSCREEN_USB_PANJIT=y CONFIG_TOUCHSCREEN_USB_3M=y CONFIG_TOUCHSCREEN_USB_ITM=y CONFIG_TOUCHSCREEN_USB_ETURBO=y CONFIG_TOUCHSCREEN_USB_GUNZE=y CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y CONFIG_TOUCHSCREEN_USB_IRTOUCH=y CONFIG_TOUCHSCREEN_USB_IDEALTEK=y CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y CONFIG_TOUCHSCREEN_USB_GOTOP=y # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set CONFIG_TOUCHSCREEN_TSC2007=y CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=y # CONFIG_INPUT_APANEL is not set # CONFIG_INPUT_ATI_REMOTE is not set CONFIG_INPUT_ATI_REMOTE2=y CONFIG_INPUT_KEYSPAN_REMOTE=y CONFIG_INPUT_POWERMATE=y # CONFIG_INPUT_YEALINK is not set CONFIG_INPUT_CM109=y CONFIG_INPUT_UINPUT=y CONFIG_INPUT_PCF50633_PMU=y CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
# # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y CONFIG_SERIO_CT82C710=y CONFIG_SERIO_PARKBD=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=y CONFIG_GAMEPORT=y # CONFIG_GAMEPORT_NS558 is not set CONFIG_GAMEPORT_L4=y CONFIG_GAMEPORT_EMU10K1=y CONFIG_GAMEPORT_FM801=y
# # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_DEVKMEM=y CONFIG_SERIAL_NONSTANDARD=y CONFIG_COMPUTONE=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set CONFIG_DIGIEPCA=y CONFIG_MOXA_INTELLIO=y # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set CONFIG_SYNCLINK=y CONFIG_SYNCLINKMP=y CONFIG_SYNCLINK_GT=y # CONFIG_N_HDLC is not set CONFIG_RISCOM8=y CONFIG_SPECIALIX=y CONFIG_SX=y # CONFIG_RIO is not set CONFIG_STALDRV=y # CONFIG_STALLION is not set # CONFIG_ISTALLION is not set # CONFIG_NOZOMI is not set
# # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set
# # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_CONSOLE_POLL=y CONFIG_SERIAL_JSM=y CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=y CONFIG_LP_CONSOLE=y # CONFIG_PPDEV is not set # CONFIG_HVC_XEN is not set CONFIG_IPMI_HANDLER=y # CONFIG_IPMI_PANIC_EVENT is not set CONFIG_IPMI_DEVICE_INTERFACE=y CONFIG_IPMI_SI=y # CONFIG_IPMI_WATCHDOG is not set CONFIG_IPMI_POWEROFF=y CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_HW_RANDOM_INTEL=y CONFIG_HW_RANDOM_AMD=y # CONFIG_NVRAM is not set # CONFIG_RTC is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_R3964 is not set CONFIG_APPLICOM=y CONFIG_MWAVE=y CONFIG_PC8736x_GPIO=y CONFIG_NSC_GPIO=y CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 CONFIG_HANGCHECK_TIMER=y CONFIG_TCG_TPM=y CONFIG_TCG_NSC=y CONFIG_TCG_ATMEL=y CONFIG_TELCLOCK=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set # CONFIG_I2C_HELPER_AUTO is not set
# # I2C Algorithms # CONFIG_I2C_ALGOBIT=y CONFIG_I2C_ALGOPCF=y CONFIG_I2C_ALGOPCA=y
# # I2C Hardware Bus support #
# # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set CONFIG_I2C_ALI1563=y CONFIG_I2C_ALI15X3=y CONFIG_I2C_AMD756=y CONFIG_I2C_AMD8111=y CONFIG_I2C_I801=y CONFIG_I2C_ISCH=y CONFIG_I2C_PIIX4=y CONFIG_I2C_NFORCE2=y CONFIG_I2C_SIS5595=y # CONFIG_I2C_SIS630 is not set CONFIG_I2C_SIS96X=y CONFIG_I2C_VIA=y # CONFIG_I2C_VIAPRO is not set
# # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_GPIO is not set CONFIG_I2C_OCORES=y CONFIG_I2C_SIMTEC=y
# # External I2C/SMBus adapter drivers # # CONFIG_I2C_PARPORT is not set CONFIG_I2C_PARPORT_LIGHT=y CONFIG_I2C_TAOS_EVM=y # CONFIG_I2C_TINY_USB is not set
# # Graphics adapter I2C/DDC channel drivers # CONFIG_I2C_VOODOO3=y
# # Other I2C/SMBus bus drivers # CONFIG_I2C_PCA_PLATFORM=y
# # Miscellaneous I2C Chip support # CONFIG_DS1682=y CONFIG_SENSORS_PCF8574=y CONFIG_PCF8575=y CONFIG_SENSORS_PCA9539=y # CONFIG_SENSORS_MAX6875 is not set CONFIG_SENSORS_TSL2550=y CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y # CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y CONFIG_SPI_DEBUG=y CONFIG_SPI_MASTER=y
# # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y CONFIG_SPI_BUTTERFLY=y CONFIG_SPI_GPIO=y # CONFIG_SPI_LM70_LLP is not set
# # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y
# # Memory mapped GPIO expanders: #
# # I2C GPIO expanders: # CONFIG_GPIO_MAX732X=y # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set CONFIG_GPIO_TWL4030=y
# # PCI GPIO expanders: # CONFIG_GPIO_BT8XX=y
# # SPI GPIO expanders: # CONFIG_GPIO_MAX7301=y CONFIG_GPIO_MCP23S08=y CONFIG_W1=y CONFIG_W1_CON=y
# # 1-wire Bus Masters # CONFIG_W1_MASTER_MATROX=y # CONFIG_W1_MASTER_DS2490 is not set CONFIG_W1_MASTER_DS2482=y CONFIG_W1_MASTER_GPIO=y
# # 1-wire Slaves # # CONFIG_W1_SLAVE_THERM is not set CONFIG_W1_SLAVE_SMEM=y # CONFIG_W1_SLAVE_DS2431 is not set CONFIG_W1_SLAVE_DS2433=y CONFIG_W1_SLAVE_DS2433_CRC=y CONFIG_W1_SLAVE_DS2760=y CONFIG_W1_SLAVE_BQ27000=y CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set CONFIG_BATTERY_DS2760=y CONFIG_BATTERY_BQ27x00=y # CONFIG_CHARGER_PCF50633 is not set # CONFIG_HWMON is not set CONFIG_THERMAL=y CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set
# # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set CONFIG_ACQUIRE_WDT=y CONFIG_ADVANTECH_WDT=y # CONFIG_ALIM1535_WDT is not set # CONFIG_ALIM7101_WDT is not set CONFIG_SC520_WDT=y CONFIG_IB700_WDT=y # CONFIG_IBMASR is not set CONFIG_WAFER_WDT=y CONFIG_I6300ESB_WDT=y CONFIG_ITCO_WDT=y CONFIG_ITCO_VENDOR_SUPPORT=y # CONFIG_IT8712F_WDT is not set CONFIG_IT87_WDT=y CONFIG_HP_WATCHDOG=y # CONFIG_SC1200_WDT is not set # CONFIG_PC87413_WDT is not set CONFIG_60XX_WDT=y CONFIG_SBC8360_WDT=y CONFIG_CPU5_WDT=y CONFIG_SMSC_SCH311X_WDT=y CONFIG_SMSC37B787_WDT=y CONFIG_W83627HF_WDT=y CONFIG_W83877F_WDT=y CONFIG_W83977F_WDT=y CONFIG_MACHZ_WDT=y CONFIG_SBC_EPX_C3_WATCHDOG=y
# # PCI-based Watchdog Cards # CONFIG_PCIPCWATCHDOG=y CONFIG_WDTPCI=y CONFIG_WDT_501_PCI=y
# # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set CONFIG_SSB_POSSIBLE=y
# # Sonics Silicon Backplane # CONFIG_SSB=y CONFIG_SSB_SPROM=y CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y # CONFIG_SSB_B43_PCI_BRIDGE is not set CONFIG_SSB_DEBUG=y CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y CONFIG_SSB_DRIVER_PCICORE=y
# # Multifunction device drivers # CONFIG_MFD_CORE=y # CONFIG_MFD_SM501 is not set CONFIG_HTC_PASIC3=y CONFIG_TPS65010=y CONFIG_TWL4030_CORE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set CONFIG_MFD_WM8400=y CONFIG_MFD_PCF50633=y # CONFIG_PCF50633_ADC is not set CONFIG_PCF50633_GPIO=y CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_BQ24022=y # CONFIG_REGULATOR_TWL4030 is not set # CONFIG_REGULATOR_WM8400 is not set CONFIG_REGULATOR_PCF50633=y
# # Multimedia devices #
# # Multimedia core support # CONFIG_VIDEO_DEV=y CONFIG_VIDEO_V4L2_COMMON=y CONFIG_VIDEO_ALLOW_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_DVB_CORE=y CONFIG_VIDEO_MEDIA=y
# # Multimedia drivers # CONFIG_VIDEO_SAA7146=y CONFIG_VIDEO_SAA7146_VV=y CONFIG_MEDIA_TUNER=y CONFIG_MEDIA_TUNER_CUSTOMISE=y CONFIG_MEDIA_TUNER_SIMPLE=y CONFIG_MEDIA_TUNER_TDA8290=y CONFIG_MEDIA_TUNER_TDA827X=y CONFIG_MEDIA_TUNER_TDA18271=y CONFIG_MEDIA_TUNER_TDA9887=y CONFIG_MEDIA_TUNER_TEA5761=y # CONFIG_MEDIA_TUNER_TEA5767 is not set CONFIG_MEDIA_TUNER_MT20XX=y CONFIG_MEDIA_TUNER_MT2060=y CONFIG_MEDIA_TUNER_MT2266=y CONFIG_MEDIA_TUNER_MT2131=y CONFIG_MEDIA_TUNER_QT1010=y # CONFIG_MEDIA_TUNER_XC2028 is not set CONFIG_MEDIA_TUNER_XC5000=y # CONFIG_MEDIA_TUNER_MXL5005S is not set CONFIG_MEDIA_TUNER_MXL5007T=y CONFIG_MEDIA_TUNER_MC44S803=y CONFIG_VIDEO_V4L2=y CONFIG_VIDEO_V4L1=y CONFIG_VIDEOBUF_GEN=y CONFIG_VIDEOBUF_DMA_SG=y CONFIG_VIDEOBUF_VMALLOC=y CONFIG_VIDEOBUF_DVB=y CONFIG_VIDEO_BTCX=y CONFIG_VIDEO_IR=y CONFIG_VIDEO_TVEEPROM=y CONFIG_VIDEO_TUNER=y CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_FIXED_MINOR_RANGES=y CONFIG_VIDEO_HELPER_CHIPS_AUTO=y CONFIG_VIDEO_IR_I2C=y CONFIG_VIDEO_MSP3400=y CONFIG_VIDEO_CS53L32A=y CONFIG_VIDEO_M52790=y CONFIG_VIDEO_WM8775=y CONFIG_VIDEO_WM8739=y CONFIG_VIDEO_VP27SMPX=y CONFIG_VIDEO_SAA6588=y CONFIG_VIDEO_SAA711X=y CONFIG_VIDEO_SAA717X=y CONFIG_VIDEO_TVP5150=y CONFIG_VIDEO_CX25840=y CONFIG_VIDEO_CX2341X=y CONFIG_VIDEO_SAA7127=y CONFIG_VIDEO_UPD64031A=y CONFIG_VIDEO_UPD64083=y CONFIG_VIDEO_VIVI=y # CONFIG_VIDEO_BT848 is not set # CONFIG_VIDEO_CPIA is not set CONFIG_VIDEO_CPIA2=y # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set CONFIG_VIDEO_SAA7134=y # CONFIG_VIDEO_SAA7134_DVB is not set # CONFIG_VIDEO_MXB is not set # CONFIG_VIDEO_HEXIUM_ORION is not set CONFIG_VIDEO_HEXIUM_GEMINI=y CONFIG_VIDEO_CX23885=y CONFIG_VIDEO_IVTV=y # CONFIG_VIDEO_CX18 is not set # CONFIG_VIDEO_CAFE_CCIC is not set # CONFIG_SOC_CAMERA is not set CONFIG_V4L_USB_DRIVERS=y # CONFIG_USB_VIDEO_CLASS is not set CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=y CONFIG_USB_M5602=y CONFIG_USB_STV06XX=y CONFIG_USB_GSPCA_CONEX=y CONFIG_USB_GSPCA_ETOMS=y # CONFIG_USB_GSPCA_FINEPIX is not set CONFIG_USB_GSPCA_MARS=y CONFIG_USB_GSPCA_MR97310A=y # CONFIG_USB_GSPCA_OV519 is not set CONFIG_USB_GSPCA_OV534=y # CONFIG_USB_GSPCA_PAC207 is not set CONFIG_USB_GSPCA_PAC7311=y CONFIG_USB_GSPCA_SONIXB=y # CONFIG_USB_GSPCA_SONIXJ is not set CONFIG_USB_GSPCA_SPCA500=y # CONFIG_USB_GSPCA_SPCA501 is not set # CONFIG_USB_GSPCA_SPCA505 is not set # CONFIG_USB_GSPCA_SPCA506 is not set CONFIG_USB_GSPCA_SPCA508=y # CONFIG_USB_GSPCA_SPCA561 is not set CONFIG_USB_GSPCA_SQ905=y CONFIG_USB_GSPCA_SQ905C=y # CONFIG_USB_GSPCA_STK014 is not set # CONFIG_USB_GSPCA_SUNPLUS is not set CONFIG_USB_GSPCA_T613=y CONFIG_USB_GSPCA_TV8532=y CONFIG_USB_GSPCA_VC032X=y CONFIG_USB_GSPCA_ZC3XX=y # CONFIG_VIDEO_PVRUSB2 is not set CONFIG_VIDEO_HDPVR=y CONFIG_VIDEO_EM28XX=y # CONFIG_VIDEO_EM28XX_DVB is not set CONFIG_VIDEO_CX231XX=y CONFIG_VIDEO_CX231XX_DVB=y CONFIG_VIDEO_USBVISION=y CONFIG_VIDEO_USBVIDEO=y # CONFIG_USB_VICAM is not set CONFIG_USB_IBMCAM=y CONFIG_USB_KONICAWC=y CONFIG_USB_QUICKCAM_MESSENGER=y # CONFIG_USB_ET61X251 is not set CONFIG_VIDEO_OVCAMCHIP=y # CONFIG_USB_W9968CF is not set CONFIG_USB_OV511=y # CONFIG_USB_SE401 is not set # CONFIG_USB_SN9C102 is not set CONFIG_USB_STV680=y CONFIG_USB_ZC0301=y CONFIG_USB_PWC=y CONFIG_USB_PWC_DEBUG=y CONFIG_USB_PWC_INPUT_EVDEV=y CONFIG_USB_ZR364XX=y # CONFIG_USB_STKWEBCAM is not set # CONFIG_USB_S2255 is not set CONFIG_RADIO_ADAPTERS=y CONFIG_RADIO_GEMTEK_PCI=y CONFIG_RADIO_MAXIRADIO=y CONFIG_RADIO_MAESTRO=y CONFIG_USB_DSBR=y CONFIG_USB_SI470X=y CONFIG_USB_MR800=y CONFIG_RADIO_TEA5764=y CONFIG_RADIO_TEA5764_XTAL=y CONFIG_DVB_DYNAMIC_MINORS=y CONFIG_DVB_CAPTURE_DRIVERS=y
# # Supported SAA7146 based PCI Adapters # CONFIG_TTPCI_EEPROM=y # CONFIG_DVB_AV7110 is not set CONFIG_DVB_BUDGET_CORE=y CONFIG_DVB_BUDGET=y CONFIG_DVB_BUDGET_CI=y # CONFIG_DVB_BUDGET_AV is not set
# # Supported USB Adapters # CONFIG_DVB_USB=y CONFIG_DVB_USB_DEBUG=y CONFIG_DVB_USB_A800=y CONFIG_DVB_USB_DIBUSB_MB=y CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y # CONFIG_DVB_USB_DIBUSB_MC is not set # CONFIG_DVB_USB_DIB0700 is not set CONFIG_DVB_USB_UMT_010=y CONFIG_DVB_USB_CXUSB=y CONFIG_DVB_USB_M920X=y # CONFIG_DVB_USB_GL861 is not set CONFIG_DVB_USB_AU6610=y # CONFIG_DVB_USB_DIGITV is not set # CONFIG_DVB_USB_VP7045 is not set # CONFIG_DVB_USB_VP702X is not set # CONFIG_DVB_USB_GP8PSK is not set # CONFIG_DVB_USB_NOVA_T_USB2 is not set CONFIG_DVB_USB_TTUSB2=y # CONFIG_DVB_USB_DTT200U is not set CONFIG_DVB_USB_OPERA1=y # CONFIG_DVB_USB_DW2102 is not set CONFIG_DVB_USB_CINERGY_T2=y CONFIG_DVB_USB_ANYSEE=y CONFIG_DVB_USB_DTV5100=y CONFIG_DVB_USB_AF9015=y # CONFIG_DVB_USB_CE6230 is not set CONFIG_DVB_TTUSB_BUDGET=y # CONFIG_DVB_TTUSB_DEC is not set CONFIG_DVB_SIANO_SMS1XXX=y CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS=y
# # Supported FlexCopII (B2C2) Adapters # CONFIG_DVB_B2C2_FLEXCOP=y # CONFIG_DVB_B2C2_FLEXCOP_PCI is not set CONFIG_DVB_B2C2_FLEXCOP_USB=y CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
# # Supported BT878 Adapters #
# # Supported Pluto2 Adapters # CONFIG_DVB_PLUTO2=y
# # Supported SDMC DM1105 Adapters # CONFIG_DVB_DM1105=y
# # Supported DVB Frontends # CONFIG_DVB_FE_CUSTOMISE=y
# # Customise DVB Frontends #
# # Multistandard (satellite) frontends # CONFIG_DVB_STB0899=y CONFIG_DVB_STB6100=y
# # DVB-S (satellite) frontends # CONFIG_DVB_CX24110=y CONFIG_DVB_CX24123=y CONFIG_DVB_MT312=y CONFIG_DVB_ZL10036=y CONFIG_DVB_S5H1420=y # CONFIG_DVB_STV0288 is not set CONFIG_DVB_STB6000=y # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_STV6110 is not set # CONFIG_DVB_STV0900 is not set # CONFIG_DVB_TDA8083 is not set CONFIG_DVB_TDA10086=y # CONFIG_DVB_TDA8261 is not set # CONFIG_DVB_VES1X93 is not set CONFIG_DVB_TUNER_ITD1000=y # CONFIG_DVB_TUNER_CX24113 is not set CONFIG_DVB_TDA826X=y CONFIG_DVB_TUA6100=y CONFIG_DVB_CX24116=y CONFIG_DVB_SI21XX=y
# # DVB-T (terrestrial) frontends # # CONFIG_DVB_SP8870 is not set CONFIG_DVB_SP887X=y # CONFIG_DVB_CX22700 is not set # CONFIG_DVB_CX22702 is not set # CONFIG_DVB_DRX397XD is not set # CONFIG_DVB_L64781 is not set CONFIG_DVB_TDA1004X=y # CONFIG_DVB_NXT6000 is not set CONFIG_DVB_MT352=y # CONFIG_DVB_ZL10353 is not set CONFIG_DVB_DIB3000MB=y CONFIG_DVB_DIB3000MC=y CONFIG_DVB_DIB7000M=y # CONFIG_DVB_DIB7000P is not set CONFIG_DVB_TDA10048=y CONFIG_DVB_AF9013=y
# # DVB-C (cable) frontends # # CONFIG_DVB_VES1820 is not set CONFIG_DVB_TDA10021=y CONFIG_DVB_TDA10023=y CONFIG_DVB_STV0297=y
# # ATSC (North American/Korean Terrestrial/Cable DTV) frontends # CONFIG_DVB_NXT200X=y CONFIG_DVB_OR51211=y # CONFIG_DVB_OR51132 is not set # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set CONFIG_DVB_LGDT3304=y CONFIG_DVB_LGDT3305=y # CONFIG_DVB_S5H1409 is not set CONFIG_DVB_AU8522=y CONFIG_DVB_S5H1411=y
# # ISDB-T (terrestrial) frontends # CONFIG_DVB_S921=y
# # Digital terrestrial only tuners/PLL # CONFIG_DVB_PLL=y CONFIG_DVB_TUNER_DIB0070=y
# # SEC control devices for DVB-S # CONFIG_DVB_LNBP21=y # CONFIG_DVB_ISL6405 is not set CONFIG_DVB_ISL6421=y CONFIG_DVB_LGS8GL5=y CONFIG_DVB_LGS8GXX=y
# # Tools to develop new frontends # CONFIG_DVB_DUMMY_FE=y CONFIG_DAB=y CONFIG_USB_DABUSB=y
# # Graphics support # CONFIG_AGP=y CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y CONFIG_AGP_SIS=y CONFIG_AGP_VIA=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_LTV350QV=y # CONFIG_LCD_ILI9320 is not set CONFIG_LCD_TDO24M=y # CONFIG_LCD_VGG2432A4 is not set CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=y # CONFIG_BACKLIGHT_PROGEAR is not set CONFIG_BACKLIGHT_MBP_NVIDIA=y CONFIG_BACKLIGHT_SAHARA=y
# # Display device support # # CONFIG_DISPLAY_SUPPORT is not set
# # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y # CONFIG_HIDRAW is not set
# # USB Input Devices # # CONFIG_USB_HID is not set CONFIG_HID_PID=y CONFIG_USB_MOUSE=y
# # Special HID drivers # CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
# # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set CONFIG_USB_MON=y CONFIG_USB_WUSB=y CONFIG_USB_WUSB_CBAF=y CONFIG_USB_WUSB_CBAF_DEBUG=y
# # USB Host Controller Drivers # CONFIG_USB_C67X00_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_OXU210HP_HCD is not set CONFIG_USB_ISP116X_HCD=y CONFIG_USB_ISP1760_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_SSB=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_U132_HCD is not set CONFIG_USB_SL811_HCD=y # CONFIG_USB_R8A66597_HCD is not set CONFIG_USB_HWA_HCD=y
# # USB Device Class drivers # CONFIG_USB_ACM=y CONFIG_USB_PRINTER=y CONFIG_USB_WDM=y CONFIG_USB_TMC=y
# # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
# # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DEBUG=y CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set CONFIG_USB_STORAGE_ALAUDA=y CONFIG_USB_STORAGE_ONETOUCH=y CONFIG_USB_STORAGE_KARMA=y # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set CONFIG_USB_LIBUSUAL=y
# # USB Imaging devices # # CONFIG_USB_MDC800 is not set CONFIG_USB_MICROTEK=y
# # USB port drivers # CONFIG_USB_USS720=y # CONFIG_USB_SERIAL is not set
# # USB Miscellaneous drivers # CONFIG_USB_EMI62=y # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set CONFIG_USB_LCD=y CONFIG_USB_BERRY_CHARGE=y # CONFIG_USB_LED is not set CONFIG_USB_CYPRESS_CY7C63=y CONFIG_USB_CYTHERM=y CONFIG_USB_IDMOUSE=y CONFIG_USB_FTDI_ELAN=y # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set CONFIG_USB_TRANCEVIBRATOR=y CONFIG_USB_IOWARRIOR=y # CONFIG_USB_TEST is not set CONFIG_USB_ISIGHTFW=y CONFIG_USB_VST=y
# # OTG and related infrastructure # CONFIG_USB_OTG_UTILS=y CONFIG_USB_GPIO_VBUS=y CONFIG_NOP_USB_XCEIV=y CONFIG_UWB=y CONFIG_UWB_HWA=y # CONFIG_UWB_WHCI is not set # CONFIG_UWB_WLP is not set CONFIG_UWB_I1480U=y CONFIG_MMC=y CONFIG_MMC_DEBUG=y CONFIG_MMC_UNSAFE_RESUME=y
# # MMC/SD/SDIO Card Drivers # # CONFIG_MMC_BLOCK is not set CONFIG_SDIO_UART=y CONFIG_MMC_TEST=y
# # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set CONFIG_MMC_WBSD=y CONFIG_MMC_TIFM_SD=y CONFIG_MMC_SPI=y CONFIG_MEMSTICK=y CONFIG_MEMSTICK_DEBUG=y
# # MemoryStick drivers # CONFIG_MEMSTICK_UNSAFE_RESUME=y # CONFIG_MSPRO_BLOCK is not set
# # MemoryStick Host Controller Drivers # # CONFIG_MEMSTICK_TIFM_MS is not set CONFIG_MEMSTICK_JMICRON_38X=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y
# # LED drivers # # CONFIG_LEDS_ALIX2 is not set CONFIG_LEDS_PCA9532=y # CONFIG_LEDS_GPIO is not set CONFIG_LEDS_LP5521=y # CONFIG_LEDS_CLEVO_MAIL is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_DAC124S085 is not set CONFIG_LEDS_BD2802=y
# # LED Triggers # CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_BACKLIGHT=y CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
# # iptables trigger is under Netfilter config (LED target) # CONFIG_ACCESSIBILITY=y CONFIG_A11Y_BRAILLE_CONSOLE=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set CONFIG_DMADEVICES=y
# # DMA Devices # CONFIG_INTEL_IOATDMA=y CONFIG_DMA_ENGINE=y
# # DMA Clients # CONFIG_NET_DMA=y CONFIG_ASYNC_TX_DMA=y # CONFIG_DMATEST is not set CONFIG_DCA=y CONFIG_AUXDISPLAY=y # CONFIG_KS0108 is not set CONFIG_UIO=y CONFIG_UIO_CIF=y CONFIG_UIO_PDRV=y CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_UIO_SMX is not set CONFIG_UIO_AEC=y CONFIG_UIO_SERCOS3=y CONFIG_XEN_BALLOON=y # CONFIG_XEN_SCRUB_PAGES is not set # CONFIG_XEN_DEV_EVTCHN is not set CONFIG_XENFS=y # CONFIG_XEN_COMPAT_XENFS is not set # CONFIG_XEN_SYS_HYPERVISOR is not set # CONFIG_X86_PLATFORM_DEVICES is not set
# # Firmware Drivers # CONFIG_EDD=y # CONFIG_EDD_OFF is not set CONFIG_FIRMWARE_MEMMAP=y # CONFIG_DELL_RBU is not set CONFIG_DCDBAS=y CONFIG_DMIID=y CONFIG_ISCSI_IBFT_FIND=y CONFIG_ISCSI_IBFT=y
# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=y CONFIG_EXT4DEV_COMPAT=y CONFIG_EXT4_FS_XATTR=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y CONFIG_JBD=y CONFIG_JBD_DEBUG=y CONFIG_JBD2=y CONFIG_JBD2_DEBUG=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=y CONFIG_XFS_QUOTA=y CONFIG_XFS_POSIX_ACL=y CONFIG_XFS_RT=y # CONFIG_XFS_DEBUG is not set CONFIG_GFS2_FS=y CONFIG_GFS2_FS_LOCKING_DLM=y CONFIG_OCFS2_FS=y CONFIG_OCFS2_FS_O2CB=y CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set CONFIG_OCFS2_DEBUG_FS=y CONFIG_OCFS2_FS_POSIX_ACL=y CONFIG_BTRFS_FS=y CONFIG_BTRFS_FS_POSIX_ACL=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y # CONFIG_INOTIFY_USER is not set CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y CONFIG_PRINT_QUOTA_WARNING=y CONFIG_QUOTA_TREE=y CONFIG_QFMT_V1=y CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=y CONFIG_GENERIC_ACL=y
# # Caches # CONFIG_FSCACHE=y CONFIG_FSCACHE_STATS=y # CONFIG_FSCACHE_HISTOGRAM is not set CONFIG_FSCACHE_DEBUG=y CONFIG_CACHEFILES=y CONFIG_CACHEFILES_DEBUG=y # CONFIG_CACHEFILES_HISTOGRAM is not set
# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set
# # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=y CONFIG_NTFS_DEBUG=y CONFIG_NTFS_RW=y
# # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=y # CONFIG_MISC_FILESYSTEMS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set CONFIG_NFSD=y CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=y CONFIG_SMB_FS=y # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_CIFS=y CONFIG_CIFS_STATS=y CONFIG_CIFS_STATS2=y # CONFIG_CIFS_WEAK_PW_HASH is not set # CONFIG_CIFS_UPCALL is not set CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y CONFIG_CIFS_DEBUG2=y # CONFIG_CIFS_DFS_UPCALL is not set CONFIG_CIFS_EXPERIMENTAL=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set
# # Partition Types # CONFIG_PARTITION_ADVANCED=y CONFIG_ACORN_PARTITION=y # CONFIG_ACORN_PARTITION_CUMANA is not set # CONFIG_ACORN_PARTITION_EESOX is not set # CONFIG_ACORN_PARTITION_ICS is not set CONFIG_ACORN_PARTITION_ADFS=y CONFIG_ACORN_PARTITION_POWERTEC=y CONFIG_ACORN_PARTITION_RISCIX=y CONFIG_OSF_PARTITION=y CONFIG_AMIGA_PARTITION=y CONFIG_ATARI_PARTITION=y CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y # CONFIG_UNIXWARE_DISKLABEL is not set CONFIG_LDM_PARTITION=y CONFIG_LDM_DEBUG=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set CONFIG_SUN_PARTITION=y CONFIG_KARMA_PARTITION=y # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set CONFIG_NLS_CODEPAGE_737=y # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set CONFIG_NLS_CODEPAGE_852=y # CONFIG_NLS_CODEPAGE_855 is not set CONFIG_NLS_CODEPAGE_857=y CONFIG_NLS_CODEPAGE_860=y CONFIG_NLS_CODEPAGE_861=y # CONFIG_NLS_CODEPAGE_862 is not set CONFIG_NLS_CODEPAGE_863=y CONFIG_NLS_CODEPAGE_864=y CONFIG_NLS_CODEPAGE_865=y # CONFIG_NLS_CODEPAGE_866 is not set CONFIG_NLS_CODEPAGE_869=y CONFIG_NLS_CODEPAGE_936=y CONFIG_NLS_CODEPAGE_950=y CONFIG_NLS_CODEPAGE_932=y CONFIG_NLS_CODEPAGE_949=y CONFIG_NLS_CODEPAGE_874=y # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set CONFIG_NLS_ISO8859_4=y CONFIG_NLS_ISO8859_5=y CONFIG_NLS_ISO8859_6=y # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set CONFIG_NLS_KOI8_R=y # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y CONFIG_DLM=y CONFIG_DLM_DEBUG=y
# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y CONFIG_ALLOW_WARNINGS=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1 # CONFIG_DETECT_HUNG_TASK is not set # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set CONFIG_DEBUG_OBJECTS=y CONFIG_DEBUG_OBJECTS_SELFTEST=y CONFIG_DEBUG_OBJECTS_FREE=y CONFIG_DEBUG_OBJECTS_TIMERS=y CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 CONFIG_SLUB_DEBUG_ON=y CONFIG_SLUB_STATS=y # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_PI_LIST=y CONFIG_RT_MUTEX_TESTER=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y # CONFIG_PROVE_LOCKING is not set CONFIG_LOCKDEP=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_LOCKDEP is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_VM=y CONFIG_DEBUG_VIRTUAL=y # CONFIG_DEBUG_WRITECOUNT is not set CONFIG_DEBUG_MEMORY_INIT=y CONFIG_DEBUG_LIST=y CONFIG_DEBUG_SG=y CONFIG_DEBUG_NOTIFIERS=y CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y CONFIG_BOOT_PRINTK_DELAY=y CONFIG_RCU_TORTURE_TEST=y # CONFIG_RCU_TORTURE_TEST_RUNNABLE is not set CONFIG_RCU_CPU_STALL_DETECTOR=y # CONFIG_BACKTRACE_SELF_TEST is not set CONFIG_FAULT_INJECTION=y # CONFIG_FAILSLAB is not set # CONFIG_FAIL_PAGE_ALLOC is not set # CONFIG_FAIL_MAKE_REQUEST is not set CONFIG_FAIL_IO_TIMEOUT=y # CONFIG_FAULT_INJECTION_DEBUG_FS is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_DEBUG_PAGEALLOC=y CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_HW_BRANCH_TRACER=y CONFIG_HAVE_FTRACE_SYSCALLS=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set CONFIG_PROVIDE_OHCI1394_DMA_INIT=y CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y CONFIG_BUILD_DOCSRC=y # CONFIG_DYNAMIC_DEBUG is not set CONFIG_DMA_API_DEBUG=y CONFIG_SAMPLES=y # CONFIG_SAMPLE_KOBJECT is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_KGDB=y CONFIG_KGDB_SERIAL_CONSOLE=y # CONFIG_KGDB_TESTS is not set CONFIG_HAVE_ARCH_KMEMCHECK=y # CONFIG_STRICT_DEVMEM is not set CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y # CONFIG_EARLY_PRINTK_DBGP is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PER_CPU_MAPS is not set CONFIG_X86_PTDUMP=y CONFIG_DEBUG_RODATA=y CONFIG_DEBUG_RODATA_TEST=y # CONFIG_IOMMU_DEBUG is not set CONFIG_IOMMU_STRESS=y CONFIG_X86_DS_SELFTEST=y CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 CONFIG_DEBUG_BOOT_PARAMS=y CONFIG_CPA_DEBUG=y # CONFIG_OPTIMIZE_INLINING is not set
# # Security options # CONFIG_KEYS=y # CONFIG_KEYS_DEBUG_PROC_KEYS is not set CONFIG_SECURITY=y CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_PATH=y CONFIG_SECURITY_FILE_CAPABILITIES=y CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_SECURITY_TOMOYO=y CONFIG_CRYPTO=y
# # Crypto core or helper # CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=y CONFIG_CRYPTO_AUTHENC=y
# # Authenticated Encryption with Associated Data # CONFIG_CRYPTO_CCM=y CONFIG_CRYPTO_GCM=y CONFIG_CRYPTO_SEQIV=y
# # Block modes # CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=y CONFIG_CRYPTO_CTS=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_LRW=y CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_XTS=y
# # Hash modes # CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=y
# # Digest # CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_CRC32C_INTEL is not set CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_RMD128=y CONFIG_CRYPTO_RMD160=y # CONFIG_CRYPTO_RMD256 is not set CONFIG_CRYPTO_RMD320=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y # CONFIG_CRYPTO_SHA512 is not set CONFIG_CRYPTO_TGR192=y CONFIG_CRYPTO_WP512=y
# # Ciphers # CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_X86_64=y CONFIG_CRYPTO_AES_NI_INTEL=y CONFIG_CRYPTO_ANUBIS=y CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_CAMELLIA=y CONFIG_CRYPTO_CAST5=y CONFIG_CRYPTO_CAST6=y CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=y CONFIG_CRYPTO_KHAZAD=y CONFIG_CRYPTO_SALSA20=y CONFIG_CRYPTO_SALSA20_X86_64=y # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_TEA is not set CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_TWOFISH_COMMON=y # CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# # Compression # CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_ZLIB is not set CONFIG_CRYPTO_LZO=y
# # Random Number Generation # CONFIG_CRYPTO_ANSI_CPRNG=y # CONFIG_CRYPTO_HW is not set CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y # CONFIG_VIRTUALIZATION is not set # CONFIG_BINARY_PRINTF is not set
# # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=y CONFIG_TEXTSEARCH_BM=y CONFIG_TEXTSEARCH_FSM=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CPUMASK_OFFSTACK=y CONFIG_NLATTR=y CONFIG_FORCE_SUCCESSFUL_BUILD=y CONFIG_FORCE_MINIMAL_CONFIG=y CONFIG_FORCE_MINIMAL_CONFIG_64=y CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
| |