lkml.org 
[lkml]   [2009]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] eeepc-laptop.c: use pr_fmt and pr_<level>
From
Date
Convert the unusual printk(EEEPC_<level> uses to
the more standard pr_fmt and pr_<level>(.

Signed-off-by: Joe Perches <joe@perches.com>

diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 353a898..94cacdd 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -16,6 +16,8 @@
* GNU General Public License for more details.
*/

+#define pr_fmt(fmt) EEEPC_HOTK_FILE ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -40,11 +42,6 @@
#define EEEPC_HOTK_DEVICE_NAME "Hotkey"
#define EEEPC_HOTK_HID "ASUS010"

-#define EEEPC_LOG EEEPC_HOTK_FILE ": "
-#define EEEPC_ERR KERN_ERR EEEPC_LOG
-#define EEEPC_WARNING KERN_WARNING EEEPC_LOG
-#define EEEPC_NOTICE KERN_NOTICE EEEPC_LOG
-#define EEEPC_INFO KERN_INFO EEEPC_LOG

/*
* Definitions for Asus EeePC
@@ -258,7 +255,7 @@ static int set_acpi(int cm, int value)
if (method == NULL)
return -ENODEV;
if (write_acpi_int(ehotk->handle, method, value, NULL))
- printk(EEEPC_WARNING "Error writing %s\n", method);
+ pr_warning("Error writing %s\n", method);
}
return 0;
}
@@ -271,7 +268,7 @@ static int get_acpi(int cm)
if (method == NULL)
return -ENODEV;
if (read_acpi_int(ehotk->handle, method, &value))
- printk(EEEPC_WARNING "Error reading %s\n", method);
+ pr_warning("Error reading %s\n", method);
}
return value;
}
@@ -468,26 +465,23 @@ static int eeepc_hotk_check(void)
if (ehotk->device->status.present) {
if (write_acpi_int(ehotk->handle, "INIT", ehotk->init_flag,
&buffer)) {
- printk(EEEPC_ERR "Hotkey initialization failed\n");
+ pr_err("Hotkey initialization failed\n");
return -ENODEV;
} else {
- printk(EEEPC_NOTICE "Hotkey init flags 0x%x\n",
- ehotk->init_flag);
+ pr_notice("Hotkey init flags 0x%x\n", ehotk->init_flag);
}
/* get control methods supported */
if (read_acpi_int(ehotk->handle, "CMSG"
, &ehotk->cm_supported)) {
- printk(EEEPC_ERR
- "Get control methods supported failed\n");
+ pr_err("Get control methods supported failed\n");
return -ENODEV;
} else {
- printk(EEEPC_INFO
- "Get control methods supported: 0x%x\n",
- ehotk->cm_supported);
+ pr_info("Get control methods supported: 0x%x\n",
+ ehotk->cm_supported);
}
ehotk->inputdev = input_allocate_device();
if (!ehotk->inputdev) {
- printk(EEEPC_INFO "Unable to allocate input device\n");
+ pr_info("Unable to allocate input device\n");
return 0;
}
ehotk->inputdev->name = "Asus EeePC extra buttons";
@@ -506,12 +500,12 @@ static int eeepc_hotk_check(void)
}
result = input_register_device(ehotk->inputdev);
if (result) {
- printk(EEEPC_INFO "Unable to register input device\n");
+ pr_info("Unable to register input device\n");
input_free_device(ehotk->inputdev);
return 0;
}
} else {
- printk(EEEPC_ERR "Hotkey device not present, aborting\n");
+ pr_err("Hotkey device not present, aborting\n");
return -EINVAL;
}
return 0;
@@ -539,7 +533,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
return;

if (!bus) {
- printk(EEEPC_WARNING "Unable to find PCI bus 1?\n");
+ pr_warning("Unable to find PCI bus 1?\n");
return;
}

@@ -556,7 +550,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
if (dev) {
pci_bus_assign_resources(bus);
if (pci_bus_add_device(dev))
- printk(EEEPC_ERR "Unable to hotplug wifi\n");
+ pr_err("Unable to hotplug wifi\n");
}
} else {
dev = pci_get_slot(bus, 0);
@@ -629,8 +623,7 @@ static int eeepc_register_rfkill_notifier(char *node)
eeepc_rfkill_notify,
NULL);
if (ACPI_FAILURE(status))
- printk(EEEPC_WARNING
- "Failed to register notify on %s\n", node);
+ pr_warning("Failed to register notify on %s\n", node);
} else
return -ENODEV;

@@ -649,8 +642,7 @@ static void eeepc_unregister_rfkill_notifier(char *node)
ACPI_SYSTEM_NOTIFY,
eeepc_rfkill_notify);
if (ACPI_FAILURE(status))
- printk(EEEPC_ERR
- "Error removing rfkill notify handler %s\n",
+ pr_err("Error removing rfkill notify handler %s\n",
node);
}
}
@@ -662,7 +654,7 @@ static int eeepc_hotk_add(struct acpi_device *device)

if (!device)
return -EINVAL;
- printk(EEEPC_NOTICE EEEPC_HOTK_NAME "\n");
+ pr_notice(EEEPC_HOTK_NAME "\n");
ehotk = kzalloc(sizeof(struct eeepc_hotk), GFP_KERNEL);
if (!ehotk)
return -ENOMEM;
@@ -678,7 +670,7 @@ static int eeepc_hotk_add(struct acpi_device *device)
status = acpi_install_notify_handler(ehotk->handle, ACPI_SYSTEM_NOTIFY,
eeepc_hotk_notify, ehotk);
if (ACPI_FAILURE(status))
- printk(EEEPC_ERR "Error installing notify handler\n");
+ pr_err("Error installing notify handler\n");

eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
@@ -766,7 +758,7 @@ static int eeepc_hotk_remove(struct acpi_device *device, int type)
status = acpi_remove_notify_handler(ehotk->handle, ACPI_SYSTEM_NOTIFY,
eeepc_hotk_notify);
if (ACPI_FAILURE(status))
- printk(EEEPC_ERR "Error removing notify handler\n");
+ pr_err("Error removing notify handler\n");

eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
@@ -936,8 +928,7 @@ static int eeepc_backlight_init(struct device *dev)
bd = backlight_device_register(EEEPC_HOTK_FILE, dev,
NULL, &eeepcbl_ops);
if (IS_ERR(bd)) {
- printk(EEEPC_ERR
- "Could not register eeepc backlight device\n");
+ pr_err("Could not register eeepc backlight device\n");
eeepc_backlight_device = NULL;
return PTR_ERR(bd);
}
@@ -956,8 +947,7 @@ static int eeepc_hwmon_init(struct device *dev)

hwmon = hwmon_device_register(dev);
if (IS_ERR(hwmon)) {
- printk(EEEPC_ERR
- "Could not register eeepc hwmon device\n");
+ pr_err("Could not register eeepc hwmon device\n");
eeepc_hwmon_device = NULL;
return PTR_ERR(hwmon);
}
@@ -990,8 +980,7 @@ static int __init eeepc_laptop_init(void)
if (result)
goto fail_backlight;
} else
- printk(EEEPC_INFO "Backlight controlled by ACPI video "
- "driver\n");
+ pr_info("Backlight controlled by ACPI video driver\n");

result = eeepc_hwmon_init(dev);
if (result)



\
 
 \ /
  Last update: 2009-06-05 12:21    [W:0.042 / U:1.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site