lkml.org 
[lkml]   [2009]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/7] MFD: ASIC3: add API for EXTCF and SDHWCTRL register manipulation
Hi Philipp

On Thu, Jun 04, 2009 at 08:36:10PM +0200, Philipp Zabel wrote:
> Those registers are needed for PCMCIA and MMC/SDIO operation as
> well as for the DS1WM.
>
> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
> ---
> drivers/mfd/asic3.c | 48 +++++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/asic3.h | 13 +++++++----
> 2 files changed, 56 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
> index 9e48545..8e1653a 100644
> --- a/drivers/mfd/asic3.c
> +++ b/drivers/mfd/asic3.c
> @@ -52,6 +52,54 @@ static inline u32 asic3_read_register(struct asic3 *asic,
> (reg >> asic->bus_shift));
> }
>
> +void asic3_set_extcf_select(struct device *dev, u32 bits, int value)
2 remarks here:
- The "value" parameter could be a bool, and could use a better name, e.g.
"set".
- Those 3 routines are basically doing the same thing. Why not having a
generic:
void asic3_set_register(struct device *dev, u32 reg, u32 bits, bool set) ?

Cheers,
Samuel.

> +{
> + struct asic3 *asic = dev->driver_data;
> + unsigned long flags;
> + u32 v;
> +
> + spin_lock_irqsave(&asic->lock, flags);
> + v = asic3_read_register(asic, ASIC3_OFFSET(EXTCF, SELECT));
> + if (value)
> + v |= bits;
> + else
> + v &= ~bits;
> + asic3_write_register(asic, ASIC3_OFFSET(EXTCF, SELECT), v);
> + spin_unlock_irqrestore(&asic->lock, flags);
> +}
> +EXPORT_SYMBOL(asic3_set_extcf_select);
> +
> +void asic3_set_extcf_reset(struct device *dev, u32 bits, int value)
> +{
> + struct asic3 *asic = dev->driver_data;
> + unsigned long flags;
> + u32 v;
> +
> + spin_lock_irqsave(&asic->lock, flags);
> + v = asic3_read_register(asic, ASIC3_OFFSET(EXTCF, RESET));
> + if (value)
> + v |= bits;
> + else
> + v &= ~bits;
> + asic3_write_register(asic, ASIC3_OFFSET(EXTCF, RESET), v);
> + spin_unlock_irqrestore(&asic->lock, flags);
> +}
> +
> +void asic3_set_sdhwctrl(struct asic3 *asic, u32 bits, int value)
> +{
> + unsigned long flags;
> + u32 v;
> +
> + spin_lock_irqsave(&asic->lock, flags);
> + v = asic3_read_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF));
> + if (value)
> + v |= bits;
> + else
> + v &= ~bits;
> + asic3_write_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF), v);
> + spin_unlock_irqrestore(&asic->lock, flags);
> +}
> +
> /* IRQs */
> #define MAX_ASIC_ISR_LOOPS 20
> #define ASIC3_GPIO_BASE_INCR \
> diff --git a/include/linux/mfd/asic3.h b/include/linux/mfd/asic3.h
> index 322cd6d..cd02d20 100644
> --- a/include/linux/mfd/asic3.h
> +++ b/include/linux/mfd/asic3.h
> @@ -16,6 +16,9 @@
>
> #include <linux/types.h>
>
> +/* for PCMCIA */
> +extern void asic3_set_extcf_select(struct device *dev, u32 bits, int value);
> +
> struct asic3_platform_data {
> u16 *gpio_config;
> unsigned int gpio_config_num;
> @@ -227,8 +230,8 @@ struct asic3_platform_data {
>
>
> /* Basic control of the SD ASIC */
> -#define ASIC3_SDHWCTRL_Base 0x0E00
> -#define ASIC3_SDHWCTRL_SDConf 0x00
> +#define ASIC3_SDHWCTRL_BASE 0x0E00
> +#define ASIC3_SDHWCTRL_SDCONF 0x00
>
> #define ASIC3_SDHWCTRL_SUSPEND (1 << 0) /* 1=suspend all SD operations */
> #define ASIC3_SDHWCTRL_CLKSEL (1 << 1) /* 1=SDICK, 0=HCLK */
> @@ -242,10 +245,10 @@ struct asic3_platform_data {
> /* SD card power supply ctrl 1=enable */
> #define ASIC3_SDHWCTRL_SDPWR (1 << 6)
>
> -#define ASIC3_EXTCF_Base 0x1100
> +#define ASIC3_EXTCF_BASE 0x1100
>
> -#define ASIC3_EXTCF_Select 0x00
> -#define ASIC3_EXTCF_Reset 0x04
> +#define ASIC3_EXTCF_SELECT 0x00
> +#define ASIC3_EXTCF_RESET 0x04
>
> #define ASIC3_EXTCF_SMOD0 (1 << 0) /* slot number of mode 0 */
> #define ASIC3_EXTCF_SMOD1 (1 << 1) /* slot number of mode 1 */
> --
> 1.6.3.1
>

--
Intel Open Source Technology Centre
http://oss.intel.com/


\
 
 \ /
  Last update: 2009-06-05 01:47    [W:0.152 / U:1.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site