lkml.org 
[lkml]   [2009]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: Kernel 2.6.30 and udevd problem
Date
On Sunday 28 June 2009 16:28:44 Kay Sievers wrote:
> If there isn't something else running which acts on uevents that
> trigger drm events, which I wouldn't expect, it seems like a drm
> kernel problem.

Ok, thanks for looking at it. I'll sum up the problem for DRM people:

The problem started after upgrading to 2.6.30. At some point, udevd starts to
use a lot of CPU time. It happens randomly, but it seems easier to trigger
when running something graphics intensive (glxgears, gtkperf, tuxracer..).

Killing udevd and starting it with the --debug switch throws up this when the
problem starts:

[22652] event_queue_insert: seq 168515 queued, 'change' 'drm'
[22657] udev_device_new_from_syspath: device 0x2040320 has devpath
'/devices/pci0000:00/0000:00:02.0/drm/card0'
[22657] udev_device_read_db: device 0x2040320 filled with db symlink data
'/dev/dri/card0'
[22657] udev_rules_apply_to_event: LINK 'char/226:0' /lib/udev/rules.d/50-
udev-default.rules:5
[22657] udev_rules_apply_to_event: NAME 'dri/card0' /lib/udev/rules.d/50-udev-
default.rules:38
[22657] udev_rules_apply_to_event: GROUP 91 /lib/udev/rules.d/50-udev-
default.rules:42
[22657] udev_device_new_from_syspath: device 0x2040790 has devpath
'/devices/pci0000:00/0000:00:02.0'
[22657] udev_device_new_from_syspath: device 0x2040a80 has devpath
'/devices/pci0000:00'
[22657] udev_rules_apply_to_event: RUN
'socket:@/org/freedesktop/hal/udev_event' /etc/udev/rules.d/90-hal.rules:2
[22657] udev_device_update_db: create db link (dri/card0 char/226:0)
[22657] udev_node_add: creating device node '/dev/dri/card0', devnum=226:0,
mode=0660, uid=0, gid=91
[22657] udev_node_mknod: preserve file '/dev/dri/card0', because it has correct
dev_t
[22657] update_link: '/dev/char/226:0' with target '/dev/dri/card0' has the
highest priority 0, create it
[22657] node_symlink: preserve already existing symlink '/dev/char/226:0' to
'../dri/card0'
[22657] udev_monitor_send_device: passed 230 bytes to monitor 0x2040320
[22657] udev_monitor_send_device: passed -1 bytes to monitor 0x2036150
[22657] event_fork: seq 168515 exit with 0
[22652] event_fork: seq 168515 forked, pid [22657], 'change' 'drm', 0 seconds
old
[22652] udev_done: seq 168515 cleanup, pid [22657], status 0, 0 seconds old

It goes on in an infinite loop.

Then using "udevadm monitor" I also get a loop of these two messages:

KERNEL[1246192153.094553] change /devices/pci0000:00/0000:00:02.0/drm/card0
(drm)
UDEV [1246192153.096463] change /devices/pci0000:00/0000:00:02.0/drm/card0
(drm)

Killing udevd stops the UDEV messages (and CPU usage goes down), but the
KERNEL messages continue.

My system is a Dell Studio desktop with Intel graphics (G45). I'm using a
standard distro kernel (Arch LInux). The problem occurs both with EXA and with
UXA+KMS, and in both 32 bit and 64 bit systems.

Thanks,
Alberto.



\
 
 \ /
  Last update: 2009-06-30 05:43    [W:0.082 / U:4.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site