lkml.org 
[lkml]   [2009]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] msm_sdcc.c: Convert printk(KERN_<level> to pr_<level>(
Date
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/mmc/host/msm_sdcc.c | 105 +++++++++++++++++++------------------------
1 files changed, 46 insertions(+), 59 deletions(-)

diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c
index 042f217..31a2837 100644
--- a/drivers/mmc/host/msm_sdcc.c
+++ b/drivers/mmc/host/msm_sdcc.c
@@ -58,8 +58,6 @@ static unsigned int msmsdcc_sdioirq;
#define PIO_SPINMAX 30
#define CMD_SPINMAX 20

-
-
static void
msmsdcc_start_command(struct msmsdcc_host *host, struct mmc_command *cmd,
u32 c);
@@ -127,7 +125,7 @@ msmsdcc_dma_complete_func(struct msm_dmov_cmd *cmd,
BUG_ON(!mrq);

if (!(result & DMOV_RSLT_VALID)) {
- printk(KERN_ERR "msmsdcc: Invalid DataMover result\n");
+ pr_err("msmsdcc: Invalid DataMover result\n");
goto out;
}

@@ -136,14 +134,13 @@ msmsdcc_dma_complete_func(struct msm_dmov_cmd *cmd,
} else {
/* Error or flush */
if (result & DMOV_RSLT_ERROR)
- printk(KERN_ERR "%s: DMA error (0x%.8x)\n",
+ pr_err("%s: DMA error (0x%.8x)\n",
mmc_hostname(host->mmc), result);
if (result & DMOV_RSLT_FLUSH)
- printk(KERN_ERR "%s: DMA channel flushed (0x%.8x)\n",
+ pr_err("%s: DMA channel flushed (0x%.8x)\n",
mmc_hostname(host->mmc), result);
if (err)
- printk(KERN_ERR
- "Flush data: %.8x %.8x %.8x %.8x %.8x %.8x\n",
+ pr_err("Flush data: %.8x %.8x %.8x %.8x %.8x %.8x\n",
err->flush[0], err->flush[1], err->flush[2],
err->flush[3], err->flush[4], err->flush[5]);
if (!mrq->data->error)
@@ -248,7 +245,7 @@ static int msmsdcc_config_dma(struct msmsdcc_host *host, struct mmc_data *data)
host->dma.num_ents, host->dma.dir);

if (n != host->dma.num_ents) {
- printk(KERN_ERR "%s: Unable to map in all sg elements\n",
+ pr_err("%s: Unable to map in all sg elements\n",
mmc_hostname(host->mmc));
host->dma.sg = NULL;
host->dma.num_ents = 0;
@@ -393,24 +390,23 @@ msmsdcc_data_err(struct msmsdcc_host *host, struct mmc_data *data,
unsigned int status)
{
if (status & MCI_DATACRCFAIL) {
- printk(KERN_ERR "%s: Data CRC error\n",
- mmc_hostname(host->mmc));
- printk(KERN_ERR "%s: opcode 0x%.8x\n", __func__,
+ pr_err("%s: Data CRC error\n", mmc_hostname(host->mmc));
+ pr_err("%s: opcode 0x%.8x\n", __func__,
data->mrq->cmd->opcode);
- printk(KERN_ERR "%s: blksz %d, blocks %d\n", __func__,
+ pr_err("%s: blksz %d, blocks %d\n", __func__,
data->blksz, data->blocks);
data->error = -EILSEQ;
} else if (status & MCI_DATATIMEOUT) {
- printk(KERN_ERR "%s: Data timeout\n", mmc_hostname(host->mmc));
+ pr_err("%s: Data timeout\n", mmc_hostname(host->mmc));
data->error = -ETIMEDOUT;
} else if (status & MCI_RXOVERRUN) {
- printk(KERN_ERR "%s: RX overrun\n", mmc_hostname(host->mmc));
+ pr_err("%s: RX overrun\n", mmc_hostname(host->mmc));
data->error = -EIO;
} else if (status & MCI_TXUNDERRUN) {
- printk(KERN_ERR "%s: TX underrun\n", mmc_hostname(host->mmc));
+ pr_err("%s: TX underrun\n", mmc_hostname(host->mmc));
data->error = -EIO;
} else {
- printk(KERN_ERR "%s: Unknown error (0x%.8x)\n",
+ pr_err("%s: Unknown error (0x%.8x)\n",
mmc_hostname(host->mmc), status);
data->error = -EIO;
}
@@ -566,8 +562,7 @@ static void msmsdcc_do_cmdirq(struct msmsdcc_host *host, uint32_t status)
cmd->error = -ETIMEDOUT;
} else if (status & MCI_CMDCRCFAIL &&
cmd->flags & MMC_RSP_CRC) {
- printk(KERN_ERR "%s: Command CRC error\n",
- mmc_hostname(host->mmc));
+ pr_err("%s: Command CRC error\n", mmc_hostname(host->mmc));
cmd->error = -EILSEQ;
}

@@ -759,8 +754,8 @@ msmsdcc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
if (ios->clock != host->clk_rate) {
rc = clk_set_rate(host->clk, ios->clock);
if (rc < 0)
- printk(KERN_ERR
- "Error setting clock rate (%d)\n", rc);
+ pr_err("%s: Error setting clock rate (%d)\n",
+ mmc_hostname(host->mmc), rc);
else
host->clk_rate = ios->clock;
}
@@ -848,9 +843,8 @@ msmsdcc_check_status(unsigned long data)
status = host->plat->status(mmc_dev(host->mmc));
host->eject = !status;
if (status ^ host->oldstat) {
- printk(KERN_INFO
- "%s: Slot status change detected (%d -> %d)\n",
- mmc_hostname(host->mmc), host->oldstat, status);
+ pr_info("%s: Slot status change detected (%d -> %d)\n",
+ mmc_hostname(host->mmc), host->oldstat, status);
if (status)
mmc_detect_change(host->mmc, (5 * HZ) / 2);
else
@@ -900,13 +894,13 @@ msmsdcc_command_expired(unsigned long _data)
mrq = host->curr.mrq;

if (!mrq) {
- printk(KERN_INFO "%s: Command expiry misfire\n",
- mmc_hostname(host->mmc));
+ pr_info("%s: Command expiry misfire\n",
+ mmc_hostname(host->mmc));
spin_unlock_irqrestore(&host->lock, flags);
return;
}

- printk(KERN_ERR "%s: Command timeout (%p %p %p %p)\n",
+ pr_err("%s: Command timeout (%p %p %p %p)\n",
mmc_hostname(host->mmc), mrq, mrq->cmd,
mrq->data, host->dma.sg);

@@ -937,7 +931,7 @@ msmsdcc_init_dma(struct msmsdcc_host *host)
&host->dma.nc_busaddr,
GFP_KERNEL);
if (host->dma.nc == NULL) {
- printk(KERN_ERR "Unable to allocate DMA buffer\n");
+ pr_err("Unable to allocate DMA buffer\n");
return -ENOMEM;
}
memset(host->dma.nc, 0x00, sizeof(struct msmsdcc_nc_dmadata));
@@ -980,7 +974,7 @@ msmsdcc_probe(struct platform_device *pdev)

/* must have platform data */
if (!plat) {
- printk(KERN_ERR "%s: Platform data not available\n", __func__);
+ pr_err("%s: Platform data not available\n", __func__);
ret = -EINVAL;
goto out;
}
@@ -989,7 +983,7 @@ msmsdcc_probe(struct platform_device *pdev)
return -EINVAL;

if (pdev->resource == NULL || pdev->num_resources < 2) {
- printk(KERN_ERR "%s: Invalid resource\n", __func__);
+ pr_err("%s: Invalid resource\n", __func__);
return -ENXIO;
}

@@ -1003,7 +997,7 @@ msmsdcc_probe(struct platform_device *pdev)
"status_irq");

if (!cmd_irqres || !pio_irqres || !memres) {
- printk(KERN_ERR "%s: Invalid resource\n", __func__);
+ pr_err("%s: Invalid resource\n", __func__);
return -ENXIO;
}

@@ -1071,8 +1065,7 @@ msmsdcc_probe(struct platform_device *pdev)

ret = clk_set_rate(host->clk, msmsdcc_fmin);
if (ret) {
- printk(KERN_ERR "%s: Clock rate set failed (%d)\n",
- __func__, ret);
+ pr_err("%s: Clock rate set failed (%d)\n", __func__, ret);
goto clk_disable;
}

@@ -1125,14 +1118,14 @@ msmsdcc_probe(struct platform_device *pdev)
DRIVER_NAME " (slot)",
host);
if (ret) {
- printk(KERN_ERR "Unable to get slot IRQ %d (%d)\n",
- host->stat_irq, ret);
+ pr_err("%s: Unable to get slot IRQ %d (%d)\n",
+ mmc_hostname(mmc), host->stat_irq, ret);
goto clk_disable;
}
} else if (plat->register_status_notify) {
plat->register_status_notify(msmsdcc_status_notify_cb, host);
} else if (!plat->status)
- printk(KERN_ERR "%s: No card detect facilities available\n",
+ pr_err("%s: No card detect facilities available\n",
mmc_hostname(mmc));
else {
init_timer(&host->timer);
@@ -1168,34 +1161,28 @@ msmsdcc_probe(struct platform_device *pdev)
mmc_set_drvdata(pdev, mmc);
mmc_add_host(mmc);

- printk(KERN_INFO
- "%s: Qualcomm MSM SDCC at 0x%016llx irq %d,%d dma %d\n",
- mmc_hostname(mmc), (unsigned long long)memres->start,
- (unsigned int) cmd_irqres->start,
- (unsigned int) host->stat_irq, host->dma.channel);
- printk(KERN_INFO "%s: 4 bit data mode %s\n", mmc_hostname(mmc),
- (mmc->caps & MMC_CAP_4_BIT_DATA ? "enabled" : "disabled"));
- printk(KERN_INFO "%s: MMC clock %u -> %u Hz, PCLK %u Hz\n",
- mmc_hostname(mmc), msmsdcc_fmin, msmsdcc_fmax, host->pclk_rate);
- printk(KERN_INFO "%s: Slot eject status = %d\n", mmc_hostname(mmc),
- host->eject);
- printk(KERN_INFO "%s: Power save feature enable = %d\n",
- mmc_hostname(mmc), msmsdcc_pwrsave);
+ pr_info("%s: Qualcomm MSM SDCC at 0x%016llx irq %d,%d dma %d\n",
+ mmc_hostname(mmc), (unsigned long long)memres->start,
+ (unsigned int) cmd_irqres->start,
+ (unsigned int) host->stat_irq, host->dma.channel);
+ pr_info("%s: 4 bit data mode %s\n", mmc_hostname(mmc),
+ (mmc->caps & MMC_CAP_4_BIT_DATA ? "enabled" : "disabled"));
+ pr_info("%s: MMC clock %u -> %u Hz, PCLK %u Hz\n",
+ mmc_hostname(mmc), msmsdcc_fmin, msmsdcc_fmax, host->pclk_rate);
+ pr_info("%s: Slot eject status = %d\n", mmc_hostname(mmc), host->eject);
+ pr_info("%s: Power save feature enable = %d\n",
+ mmc_hostname(mmc), msmsdcc_pwrsave);

if (host->dma.channel != -1) {
- printk(KERN_INFO
- "%s: DM non-cached buffer at %p, dma_addr 0x%.8x\n",
- mmc_hostname(mmc), host->dma.nc, host->dma.nc_busaddr);
- printk(KERN_INFO
- "%s: DM cmd busaddr 0x%.8x, cmdptr busaddr 0x%.8x\n",
- mmc_hostname(mmc), host->dma.cmd_busaddr,
- host->dma.cmdptr_busaddr);
+ pr_info("%s: DM non-cached buffer at %p, dma_addr 0x%.8x\n",
+ mmc_hostname(mmc), host->dma.nc, host->dma.nc_busaddr);
+ pr_info("%s: DM cmd busaddr 0x%.8x, cmdptr busaddr 0x%.8x\n",
+ mmc_hostname(mmc), host->dma.cmd_busaddr,
+ host->dma.cmdptr_busaddr);
} else
- printk(KERN_INFO
- "%s: PIO transfer enabled\n", mmc_hostname(mmc));
+ pr_info("%s: PIO transfer enabled\n", mmc_hostname(mmc));
if (host->timer.function)
- printk(KERN_INFO "%s: Polling status mode enabled\n",
- mmc_hostname(mmc));
+ pr_info("%s: Polling status mode enabled\n", mmc_hostname(mmc));

return 0;
cmd_irq_free:
--
1.6.3.1.10.g659a0.dirty


\
 
 \ /
  Last update: 2009-06-30 02:05    [W:0.060 / U:4.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site