[lkml]   [2009]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: 2.6.30: suspend-to-ram, second s2r wakes up immediately
Am Donnerstag, den 18.06.2009, 00:24 +0200 schrieb Frans Pop: 
> On Wednesday 17 June 2009, Thomas Meyer wrote:
> > Sure. Rearranging the usb devices and removing some hubs makes the
> > problem go away in most cases...
> I see that you still have the Broadcom "Wireless RNDIS device" attached
> that was my initial suspect after looking through your boot log.
> Does removing that device make the problem go away?


> Can you reproduce the problem at all without that device connected (during boot)?


> Probably moving that device to a different controller than used for your
> keyboard and mouse will also get rid of the problem. Correct?

Not tested yet.

> If removing that device does solve the problem, I would guess that without
> it you will also no longer have that "PME+" value in the output of lspci
> for the USB Controller it is connected to.

With network device removed (during boot and later on) the PME+ doesn't
appear anymore for the USB controller.

> Hopefully someone else can then explain how/why that device forces the
> PME+ setting for the controller.
> But I must also say that to me it seems rather fragile that in default
> configuration a random USB device can suddenly cause wakeups as result of
> a change caused by a totally different device.
> Cheers,

 \ /
  Last update: 2009-06-29 19:33    [W:0.039 / U:4.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site