lkml.org 
[lkml]   [2009]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 17/18] Staging: rtl8187se: cleanup r8180_rtl8225z2.c
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rtl8187se: cleanup r8180_rtl8225z2.c

* make read_rtl8225() static
* make tables static const
* remove commented out code
* remove useless comments
* beautify code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/staging/rtl8187se/r8180_rtl8225z2.c | 894 ++++++++--------------------
1 file changed, 279 insertions(+), 615 deletions(-)

Index: b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
===================================================================
--- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c
+++ b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
@@ -236,34 +236,31 @@ static void rtl8225_SetTXPowerLevel(stru
mdelay(1);
}

-//2005.11.16
-u8 rtl8225z2_threshold[]={
+static const u8 rtl8225z2_threshold[] = {
0x8d, 0x8d, 0x8d, 0x8d, 0x9d, 0xad, 0xbd,
};

-// 0xd 0x19 0x1b 0x21
-u8 rtl8225z2_gain_bg[]={
- 0x23, 0x15, 0xa5, // -82-1dbm
- 0x23, 0x15, 0xb5, // -82-2dbm
- 0x23, 0x15, 0xc5, // -82-3dbm
- 0x33, 0x15, 0xc5, // -78dbm
- 0x43, 0x15, 0xc5, // -74dbm
- 0x53, 0x15, 0xc5, // -70dbm
- 0x63, 0x15, 0xc5, // -66dbm
+static const u8 rtl8225z2_gain_bg[] = {
+ 0x23, 0x15, 0xa5, /* -82-1dBm */
+ 0x23, 0x15, 0xb5, /* -82-2dBm */
+ 0x23, 0x15, 0xc5, /* -82-3dBm */
+ 0x33, 0x15, 0xc5, /* -78dBm */
+ 0x43, 0x15, 0xc5, /* -74dBm */
+ 0x53, 0x15, 0xc5, /* -70dBm */
+ 0x63, 0x15, 0xc5, /* -66dBm */
};

-u8 rtl8225z2_gain_a[]={
- 0x13,0x27,0x5a,//,0x37,// -82dbm
- 0x23,0x23,0x58,//,0x37,// -82dbm
- 0x33,0x1f,0x56,//,0x37,// -82dbm
- 0x43,0x1b,0x54,//,0x37,// -78dbm
- 0x53,0x17,0x51,//,0x37,// -74dbm
- 0x63,0x24,0x4f,//,0x37,// -70dbm
- 0x73,0x0f,0x4c,//,0x37,// -66dbm
+static const u8 rtl8225z2_gain_a[] = {
+ 0x13, 0x27, 0x5a, /* -82dBm */
+ 0x23, 0x23, 0x58, /* -82dBm */
+ 0x33, 0x1f, 0x56, /* -82dBm */
+ 0x43, 0x1b, 0x54, /* -78dBm */
+ 0x53, 0x17, 0x51, /* -74dBm */
+ 0x63, 0x24, 0x4f, /* -70dBm */
+ 0x73, 0x0f, 0x4c, /* -66dBm */
};

-//-
-u16 rtl8225z2_rxgain[]={
+static const u16 rtl8225z2_rxgain[] = {
0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
@@ -279,75 +276,52 @@ u16 rtl8225z2_rxgain[]={

};

-//2005.11.16,
-u8 ZEBRA2_CCK_OFDM_GAIN_SETTING[]={
- 0x00,0x01,0x02,0x03,0x04,0x05,
- 0x06,0x07,0x08,0x09,0x0a,0x0b,
- 0x0c,0x0d,0x0e,0x0f,0x10,0x11,
- 0x12,0x13,0x14,0x15,0x16,0x17,
- 0x18,0x19,0x1a,0x1b,0x1c,0x1d,
- 0x1e,0x1f,0x20,0x21,0x22,0x23,
+static const u8 ZEBRA2_CCK_OFDM_GAIN_SETTING[] = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
+ 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
+ 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11,
+ 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+ 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d,
+ 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23,
};

-/*
- from 0 to 0x23
-u8 rtl8225_tx_gain_cck_ofdm[]={
- 0x02,0x06,0x0e,0x1e,0x3e,0x7e
-};
-*/
-
-//-
-u8 rtl8225z2_tx_power_ofdm[]={
- 0x42,0x00,0x40,0x00,0x40
+static const u8 rtl8225z2_tx_power_ofdm[] = {
+ 0x42, 0x00, 0x40, 0x00, 0x40
};

-
-//-
-u8 rtl8225z2_tx_power_cck_ch14[]={
- 0x36,0x35,0x2e,0x1b,0x00,0x00,0x00,0x00
+static const u8 rtl8225z2_tx_power_cck_ch14[] = {
+ 0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00
};

-
-//-
-u8 rtl8225z2_tx_power_cck[]={
- 0x36,0x35,0x2e,0x25,0x1c,0x12,0x09,0x04
+static const u8 rtl8225z2_tx_power_cck[] = {
+ 0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04
};

-
void rtl8225z2_set_gain(struct net_device *dev, short gain)
{
- u8* rtl8225_gain;
+ const u8 *rtl8225_gain;
struct r8180_priv *priv = ieee80211_priv(dev);
-
u8 mode = priv->ieee80211->mode;

- if(mode == IEEE_B || mode == IEEE_G)
+ if (mode == IEEE_B || mode == IEEE_G)
rtl8225_gain = rtl8225z2_gain_bg;
else
rtl8225_gain = rtl8225z2_gain_a;

- //write_phy_ofdm(dev, 0x0d, rtl8225_gain[gain * 3]);
- //write_phy_ofdm(dev, 0x19, rtl8225_gain[gain * 3 + 1]);
- //write_phy_ofdm(dev, 0x1b, rtl8225_gain[gain * 3 + 2]);
- //2005.11.17, by ch-hsu
- write_phy_ofdm(dev, 0x0b, rtl8225_gain[gain * 3]);
- write_phy_ofdm(dev, 0x1b, rtl8225_gain[gain * 3 + 1]);
- write_phy_ofdm(dev, 0x1d, rtl8225_gain[gain * 3 + 2]);
+ write_phy_ofdm(dev, 0x0b, rtl8225_gain[gain * 3]);
+ write_phy_ofdm(dev, 0x1b, rtl8225_gain[gain * 3 + 1]);
+ write_phy_ofdm(dev, 0x1d, rtl8225_gain[gain * 3 + 2]);
write_phy_ofdm(dev, 0x21, 0x37);
-
}

-u32 read_rtl8225(struct net_device *dev, u8 adr)
+static u32 read_rtl8225(struct net_device *dev, u8 adr)
{
u32 data2Write = ((u32)(adr & 0x1f)) << 27;
u32 dataRead;
u32 mask;
u16 oval,oval2,oval3,tmp;
-// ThreeWireReg twreg;
-// ThreeWireReg tdata;
int i;
short bit, rw;
-
u8 wLength = 6;
u8 rLength = 12;
u8 low2high = 0;
@@ -370,8 +344,8 @@ u32 read_rtl8225(struct net_device *dev,
rw = 0;

mask = (low2high) ? 0x01 : (((u32)0x01)<<(32-1));
- for(i = 0; i < wLength/2; i++)
- {
+
+ for (i = 0; i < wLength/2; i++) {
bit = ((data2Write&mask) != 0) ? 1 : 0;
write_nic_word(dev, RFPinsOutput, bit|oval | rw); udelay(1);

@@ -380,8 +354,7 @@ u32 read_rtl8225(struct net_device *dev,

mask = (low2high) ? (mask<<1): (mask>>1);

- if(i == 2)
- {
+ if (i == 2) {
rw = BB_HOST_BANG_RW;
write_nic_word(dev, RFPinsOutput, bit|oval | BB_HOST_BANG_CLK | rw); udelay(2);
write_nic_word(dev, RFPinsOutput, bit|oval | rw); udelay(2);
@@ -398,17 +371,16 @@ u32 read_rtl8225(struct net_device *dev,
mask = (low2high) ? (mask<<1) : (mask>>1);
}

- //twreg.struc.clk = 0;
- //twreg.struc.data = 0;
write_nic_word(dev, RFPinsOutput, rw|oval); udelay(2);
mask = (low2high) ? 0x01 : (((u32)0x01) << (12-1));

- // We must set data pin to HW controled, otherwise RF can't driver it and
- // value RF register won't be able to read back properly. 2006.06.13, by rcnjko.
+ /*
+ * We must set data pin to HW controled, otherwise RF can't driver it
+ * and value RF register won't be able to read back properly.
+ */
write_nic_word(dev, RFPinsEnable, (oval2 & (~0x01)));

- for(i = 0; i < rLength; i++)
- {
+ for (i = 0; i < rLength; i++) {
write_nic_word(dev, RFPinsOutput, rw|oval); udelay(1);

write_nic_word(dev, RFPinsOutput, rw|oval|BB_HOST_BANG_CLK); udelay(2);
@@ -426,36 +398,26 @@ u32 read_rtl8225(struct net_device *dev,
write_nic_word(dev, RFPinsOutput, BB_HOST_BANG_EN|BB_HOST_BANG_RW|oval); udelay(2);

write_nic_word(dev, RFPinsEnable, oval2);
- write_nic_word(dev, RFPinsSelect, oval3); // Set To SW Switch
+ write_nic_word(dev, RFPinsSelect, oval3); /* Set To SW Switch */
write_nic_word(dev, RFPinsOutput, 0x3a0);

return dataRead;
-
}

short rtl8225_is_V_z2(struct net_device *dev)
{
short vz2 = 1;
- //int i;
- /* sw to reg pg 1 */
- //write_rtl8225(dev, 0, 0x1b7);
- //write_rtl8225(dev, 0, 0x0b7);

- /* reg 8 pg 1 = 23*/
- //printk(KERN_WARNING "RF Rigisters:\n");
-
- if( read_rtl8225(dev, 8) != 0x588)
+ if (read_rtl8225(dev, 8) != 0x588)
vz2 = 0;
-
else /* reg 9 pg 1 = 24 */
- if( read_rtl8225(dev, 9) != 0x700)
+ if (read_rtl8225(dev, 9) != 0x700)
vz2 = 0;

/* sw back to pg 0 */
write_rtl8225(dev, 0, 0xb7);

return vz2;
-
}

void rtl8225z2_rf_close(struct net_device *dev)
@@ -469,67 +431,55 @@ void rtl8225z2_rf_close(struct net_devic
rtl8185_set_anaparam2(dev, RTL8225z2_ANAPARAM2_OFF);
}

-//
-// Description:
-// Map dBm into Tx power index according to
-// current HW model, for example, RF and PA, and
-// current wireless mode.
-//
-s8
-DbmToTxPwrIdx(
- struct r8180_priv *priv,
- WIRELESS_MODE WirelessMode,
- s32 PowerInDbm
- )
+/*
+ * Map dBm into Tx power index according to current HW model, for example,
+ * RF and PA, and current wireless mode.
+ */
+s8 DbmToTxPwrIdx(struct r8180_priv *priv, WIRELESS_MODE WirelessMode,
+ s32 PowerInDbm)
{
bool bUseDefault = true;
s8 TxPwrIdx = 0;

- //
- // 071011, SD3 SY:
- // OFDM Power in dBm = Index * 0.5 + 0
- // CCK Power in dBm = Index * 0.25 + 13
- //
- if(priv->card_8185 >= VERSION_8187S_B)
- {
+ /*
+ * OFDM Power in dBm = Index * 0.5 + 0
+ * CCK Power in dBm = Index * 0.25 + 13
+ */
+ if (priv->card_8185 >= VERSION_8187S_B) {
s32 tmp = 0;

- if(WirelessMode == WIRELESS_MODE_G)
- {
+ if (WirelessMode == WIRELESS_MODE_G) {
bUseDefault = false;
tmp = (2 * PowerInDbm);

- if(tmp < 0)
+ if (tmp < 0)
TxPwrIdx = 0;
- else if(tmp > 40) // 40 means 20 dBm.
+ else if (tmp > 40) /* 40 means 20 dBm. */
TxPwrIdx = 40;
else
TxPwrIdx = (s8)tmp;
- }
- else if(WirelessMode == WIRELESS_MODE_B)
- {
+ } else if (WirelessMode == WIRELESS_MODE_B) {
bUseDefault = false;
tmp = (4 * PowerInDbm) - 52;

if(tmp < 0)
TxPwrIdx = 0;
- else if(tmp > 28) // 28 means 20 dBm.
+ else if (tmp > 28) /* 28 means 20 dBm. */
TxPwrIdx = 28;
else
TxPwrIdx = (s8)tmp;
}
}

- //
- // TRUE if we want to use a default implementation.
- // We shall set it to FALSE when we have exact translation formular
- // for target IC. 070622, by rcnjko.
- //
- if(bUseDefault)
- {
- if(PowerInDbm < 0)
+ /*
+ * TRUE if we want to use a default implementation.
+ * We shall set it to FALSE when we have exact translation formular
+ * for target IC. 070622, by rcnjko.
+ */
+ if (bUseDefault) {
+ if (PowerInDbm < 0)
TxPwrIdx = 0;
- else if(PowerInDbm > 35)
+ else if (PowerInDbm > 35)
TxPwrIdx = 35;
else
TxPwrIdx = (u8)PowerInDbm;
@@ -541,133 +491,75 @@ DbmToTxPwrIdx(
void rtl8225z2_SetTXPowerLevel(struct net_device *dev, short ch)
{
struct r8180_priv *priv = ieee80211_priv(dev);
-
-// int GainIdx;
-// int GainSetting;
- //int i;
- //u8 power;
- //u8 *cck_power_table;
u8 max_cck_power_level;
- //u8 min_cck_power_level;
u8 max_ofdm_power_level;
u8 min_ofdm_power_level;
-// u8 cck_power_level = 0xff & priv->chtxpwr[ch];//-by amy 080312
-// u8 ofdm_power_level = 0xff & priv->chtxpwr_ofdm[ch];//-by amy 080312
- char cck_power_level = (char)(0xff & priv->chtxpwr[ch]);//+by amy 080312
- char ofdm_power_level = (char)(0xff & priv->chtxpwr_ofdm[ch]);//+by amy 080312
-
- if(IS_DOT11D_ENABLE(priv->ieee80211) &&
- IS_DOT11D_STATE_DONE(priv->ieee80211) )
- {
- //PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(priv->ieee80211);
+ char cck_power_level = (char)(0xff & priv->chtxpwr[ch]);
+ char ofdm_power_level = (char)(0xff & priv->chtxpwr_ofdm[ch]);
+
+ if (IS_DOT11D_ENABLE(priv->ieee80211) &&
+ IS_DOT11D_STATE_DONE(priv->ieee80211)) {
u8 MaxTxPwrInDbm = DOT11D_GetMaxTxPwrInDbm(priv->ieee80211, ch);
u8 CckMaxPwrIdx = DbmToTxPwrIdx(priv, WIRELESS_MODE_B, MaxTxPwrInDbm);
u8 OfdmMaxPwrIdx = DbmToTxPwrIdx(priv, WIRELESS_MODE_G, MaxTxPwrInDbm);

- //printk("Max Tx Power dBm (%d) => CCK Tx power index : %d, OFDM Tx power index: %d\n", MaxTxPwrInDbm, CckMaxPwrIdx, OfdmMaxPwrIdx);
-
- //printk("EEPROM channel(%d) => CCK Tx power index: %d, OFDM Tx power index: %d\n",
- // ch, cck_power_level, ofdm_power_level);
-
- if(cck_power_level > CckMaxPwrIdx)
+ if (cck_power_level > CckMaxPwrIdx)
cck_power_level = CckMaxPwrIdx;
- if(ofdm_power_level > OfdmMaxPwrIdx)
+ if (ofdm_power_level > OfdmMaxPwrIdx)
ofdm_power_level = OfdmMaxPwrIdx;
}

- //priv->CurrentCckTxPwrIdx = cck_power_level;
- //priv->CurrentOfdmTxPwrIdx = ofdm_power_level;
-
max_cck_power_level = 15;
- max_ofdm_power_level = 25; // 12 -> 25
+ max_ofdm_power_level = 25;
min_ofdm_power_level = 10;

-
- if(cck_power_level > 35)
- {
+ if (cck_power_level > 35)
cck_power_level = 35;
- }
- //
- // Set up CCK TXAGC. suggested by SD3 SY.
- //
- write_nic_byte(dev, CCK_TXAGC, (ZEBRA2_CCK_OFDM_GAIN_SETTING[(u8)cck_power_level]) );
- //printk("CCK TX power is %x\n", (ZEBRA2_CCK_OFDM_GAIN_SETTING[cck_power_level]));
- force_pci_posting(dev);
+
+ write_nic_byte(dev, CCK_TXAGC,
+ (ZEBRA2_CCK_OFDM_GAIN_SETTING[(u8)cck_power_level]));
+ force_pci_posting(dev);
mdelay(1);
- /* OFDM power setting */
-// Old:
-// if(ofdm_power_level > max_ofdm_power_level)
-// ofdm_power_level = 35;
-// ofdm_power_level += min_ofdm_power_level;
-// Latest:
-/* if(ofdm_power_level > (max_ofdm_power_level - min_ofdm_power_level))
- ofdm_power_level = max_ofdm_power_level;
- else
- ofdm_power_level += min_ofdm_power_level;

- ofdm_power_level += priv->ofdm_txpwr_base;
-*/
- if(ofdm_power_level > 35)
+ if (ofdm_power_level > 35)
ofdm_power_level = 35;

-// rtl8185_set_anaparam2(dev,RTL8225_ANAPARAM2_ON);
-
- //rtl8185_set_anaparam2(dev, ANAPARM2_ASIC_ON);
-
if (priv->up == 0) {
- //must add these for rtl8185B down, xiong-2006-11-21
- write_phy_ofdm(dev,2,0x42);
- write_phy_ofdm(dev,5,0);
- write_phy_ofdm(dev,6,0x40);
- write_phy_ofdm(dev,7,0);
- write_phy_ofdm(dev,8,0x40);
+ write_phy_ofdm(dev, 2, 0x42);
+ write_phy_ofdm(dev, 5, 0x00);
+ write_phy_ofdm(dev, 6, 0x40);
+ write_phy_ofdm(dev, 7, 0x00);
+ write_phy_ofdm(dev, 8, 0x40);
}

- //write_nic_byte(dev, TX_GAIN_OFDM, ofdm_power_level);
- //2005.11.17,
- write_nic_byte(dev, OFDM_TXAGC, ZEBRA2_CCK_OFDM_GAIN_SETTING[(u8)ofdm_power_level]);
- if(ofdm_power_level<=11)
- {
-// write_nic_dword(dev,PHY_ADR,0x00005c87);
-// write_nic_dword(dev,PHY_ADR,0x00005c89);
- write_phy_ofdm(dev,0x07,0x5c);
- write_phy_ofdm(dev,0x09,0x5c);
- }
- if(ofdm_power_level<=17)
- {
-// write_nic_dword(dev,PHY_ADR,0x00005487);
-// write_nic_dword(dev,PHY_ADR,0x00005489);
- write_phy_ofdm(dev,0x07,0x54);
- write_phy_ofdm(dev,0x09,0x54);
- }
- else
- {
-// write_nic_dword(dev,PHY_ADR,0x00005087);
-// write_nic_dword(dev,PHY_ADR,0x00005089);
- write_phy_ofdm(dev,0x07,0x50);
- write_phy_ofdm(dev,0x09,0x50);
+ write_nic_byte(dev, OFDM_TXAGC,
+ ZEBRA2_CCK_OFDM_GAIN_SETTING[(u8)ofdm_power_level]);
+
+ if (ofdm_power_level <= 11) {
+ write_phy_ofdm(dev, 0x07, 0x5c);
+ write_phy_ofdm(dev, 0x09, 0x5c);
}
+
+ if (ofdm_power_level <= 17) {
+ write_phy_ofdm(dev, 0x07, 0x54);
+ write_phy_ofdm(dev, 0x09, 0x54);
+ } else {
+ write_phy_ofdm(dev, 0x07, 0x50);
+ write_phy_ofdm(dev, 0x09, 0x50);
+ }
+
force_pci_posting(dev);
mdelay(1);
-
}

void rtl8225z2_rf_set_chan(struct net_device *dev, short ch)
{
-/*
- short gset = (priv->ieee80211->state == IEEE80211_LINKED &&
- ieee80211_is_54g(priv->ieee80211->current_network)) ||
- priv->ieee80211->iw_mode == IW_MODE_MONITOR;
-*/
rtl8225z2_SetTXPowerLevel(dev, ch);

RF_WriteReg(dev, 0x7, rtl8225_chan[ch]);

- //YJ,add,080828, if set channel failed, write again
- if((RF_ReadReg(dev, 0x7) & 0x0F80) != rtl8225_chan[ch])
- {
+ if ((RF_ReadReg(dev, 0x7) & 0x0F80) != rtl8225_chan[ch])
RF_WriteReg(dev, 0x7, rtl8225_chan[ch]);
- }

mdelay(1);

@@ -739,8 +631,6 @@ void rtl8225z2_rf_init(struct net_device

priv->chan = channel;

-// rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_ON);
-
if (priv->card_type != USB)
rtl8225_host_pci_init(dev);

@@ -750,74 +640,40 @@ void rtl8225z2_rf_init(struct net_device

write_nic_word(dev, BRSR, 0xffff);

-
write_nic_dword(dev, RF_PARA, 0x100044);

- #if 1 //0->1
rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
write_nic_byte(dev, CONFIG3, 0x44);
rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
- #endif
-

rtl8185_rf_pins_enable(dev);

-// mdelay(1000);
-
write_rtl8225(dev, 0x0, 0x2bf); mdelay(1);
-
-
write_rtl8225(dev, 0x1, 0xee0); mdelay(1);
-
write_rtl8225(dev, 0x2, 0x44d); mdelay(1);
-
write_rtl8225(dev, 0x3, 0x441); mdelay(1);
-
-
- write_rtl8225(dev, 0x4, 0x8c3);mdelay(1);
-
-
-
- write_rtl8225(dev, 0x5, 0xc72);mdelay(1);
-// }
-
+ write_rtl8225(dev, 0x4, 0x8c3); mdelay(1);
+ write_rtl8225(dev, 0x5, 0xc72); mdelay(1);
write_rtl8225(dev, 0x6, 0xe6); mdelay(1);
-
write_rtl8225(dev, 0x7, ((priv->card_type == USB)? 0x82a : rtl8225_chan[channel])); mdelay(1);
-
write_rtl8225(dev, 0x8, 0x3f); mdelay(1);
-
- write_rtl8225(dev, 0x9, 0x335); mdelay(1);
-
- write_rtl8225(dev, 0xa, 0x9d4); mdelay(1);
-
- write_rtl8225(dev, 0xb, 0x7bb); mdelay(1);
-
- write_rtl8225(dev, 0xc, 0x850); mdelay(1);
-
-
- write_rtl8225(dev, 0xd, 0xcdf); mdelay(1);
-
+ write_rtl8225(dev, 0x9, 0x335); mdelay(1);
+ write_rtl8225(dev, 0xa, 0x9d4); mdelay(1);
+ write_rtl8225(dev, 0xb, 0x7bb); mdelay(1);
+ write_rtl8225(dev, 0xc, 0x850); mdelay(1);
+ write_rtl8225(dev, 0xd, 0xcdf); mdelay(1);
write_rtl8225(dev, 0xe, 0x2b); mdelay(1);
-
write_rtl8225(dev, 0xf, 0x114);

-
mdelay(100);

-
- //if(priv->card_type != USB) /* maybe not needed even for 8185 */
-// write_rtl8225(dev, 0x7, rtl8225_chan[channel]);
-
write_rtl8225(dev, 0x0, 0x1b7);

- for(i=0;i<95;i++){
- write_rtl8225(dev, 0x1, (u8)(i+1));
-
- /* version B & C & D*/
-
+ for (i = 0; i < 95; i++) {
+ write_rtl8225(dev, 0x1, (u8)(i + 1));
write_rtl8225(dev, 0x2, rtl8225z2_rxgain[i]);
}
+
write_rtl8225(dev, 0x3, 0x80);
write_rtl8225(dev, 0x5, 0x4);

@@ -825,160 +681,90 @@ void rtl8225z2_rf_init(struct net_device

write_rtl8225(dev, 0x2, 0xc4d);

- if(priv->card_type == USB){
- // force_pci_posting(dev);
+ if (priv->card_type == USB) {
mdelay(200);

write_rtl8225(dev, 0x2, 0x44d);
-
- // force_pci_posting(dev);
mdelay(100);
+ }

- }//End of if(priv->card_type == USB)
/* FIXME!! rtl8187 we have to check if calibrarion
* is successful and eventually cal. again (repeat
* the two write on reg 2)
- */
- // Check for calibration status, 2005.11.17,
- data = read_rtl8225(dev, 6);
- if (!(data&0x00000080))
- {
- write_rtl8225(dev, 0x02, 0x0c4d);
- force_pci_posting(dev); mdelay(200);
- write_rtl8225(dev, 0x02, 0x044d);
- force_pci_posting(dev); mdelay(100);
- data = read_rtl8225(dev, 6);
- if (!(data&0x00000080))
- {
- DMESGW("RF Calibration Failed!!!!\n");
- }
- }
- //force_pci_posting(dev);
-
- mdelay(200); //200 for 8187
-
+ */
+ data = read_rtl8225(dev, 6);
+ if (!(data & 0x00000080)) {
+ write_rtl8225(dev, 0x02, 0x0c4d);
+ force_pci_posting(dev); mdelay(200);
+ write_rtl8225(dev, 0x02, 0x044d);
+ force_pci_posting(dev); mdelay(100);
+ data = read_rtl8225(dev, 6);
+ if (!(data & 0x00000080))
+ DMESGW("RF Calibration Failed!!!!\n");
+ }

-// //if(priv->card_type != USB){
-// write_rtl8225(dev, 0x2, 0x44d);
-// write_rtl8225(dev, 0x7, rtl8225_chan[channel]);
-// write_rtl8225(dev, 0x2, 0x47d);
-//
-// force_pci_posting(dev);
-// mdelay(100);
-//
-// write_rtl8225(dev, 0x2, 0x44d);
-// //}
+ mdelay(200);

write_rtl8225(dev, 0x0, 0x2bf);

- if(priv->card_type != USB)
+ if (priv->card_type != USB)
rtl8185_rf_pins_enable(dev);
- //set up ZEBRA AGC table, 2005.11.17,
- for(i=0;i<128;i++){
- data = rtl8225_agc[i];

- addr = i + 0x80; //enable writing AGC table
- write_phy_ofdm(dev, 0xb, data);
+ for (i = 0; i < 128; i++) {
+ data = rtl8225_agc[i];

- mdelay(1);
- write_phy_ofdm(dev, 0xa, addr);
+ addr = i + 0x80; /* enable writing AGC table */
+ write_phy_ofdm(dev, 0xb, data);
+ mdelay(1);

- mdelay(1);
- }
+ write_phy_ofdm(dev, 0xa, addr);
+ mdelay(1);
+ }

force_pci_posting(dev);
mdelay(1);

- write_phy_ofdm(dev, 0x0, 0x1); mdelay(1);
- write_phy_ofdm(dev, 0x1, 0x2); mdelay(1);
- write_phy_ofdm(dev, 0x2, ((priv->card_type == USB)? 0x42 : 0x62)); mdelay(1);
- write_phy_ofdm(dev, 0x3, 0x0); mdelay(1);
- write_phy_ofdm(dev, 0x4, 0x0); mdelay(1);
- write_phy_ofdm(dev, 0x5, 0x0); mdelay(1);
- write_phy_ofdm(dev, 0x6, 0x40); mdelay(1);
- write_phy_ofdm(dev, 0x7, 0x0); mdelay(1);
- write_phy_ofdm(dev, 0x8, 0x40); mdelay(1);
- write_phy_ofdm(dev, 0x9, 0xfe); mdelay(1);
-
- write_phy_ofdm(dev, 0xa, 0x8); mdelay(1);
-
- //write_phy_ofdm(dev, 0x18, 0xef);
- // }
- //}
- write_phy_ofdm(dev, 0xb, 0x80); mdelay(1);
-
- write_phy_ofdm(dev, 0xc, 0x1);mdelay(1);
-
-
- //if(priv->card_type != USB)
- write_phy_ofdm(dev, 0xd, 0x43);
-
- write_phy_ofdm(dev, 0xe, 0xd3);mdelay(1);
-
-
- write_phy_ofdm(dev, 0xf, 0x38);mdelay(1);
-/*ver D & 8187*/
-// }
-
-// if(priv->card_8185 == 1 && priv->card_8185_Bversion)
-// write_phy_ofdm(dev, 0x10, 0x04);/*ver B*/
-// else
- write_phy_ofdm(dev, 0x10, 0x84);mdelay(1);
-/*ver C & D & 8187*/
-
- write_phy_ofdm(dev, 0x11, 0x07);mdelay(1);
-/*agc resp time 700*/
-
-
-// if(priv->card_8185 == 2){
- /* Ver D & 8187*/
- write_phy_ofdm(dev, 0x12, 0x20);mdelay(1);
-
- write_phy_ofdm(dev, 0x13, 0x20);mdelay(1);
-
- write_phy_ofdm(dev, 0x14, 0x0); mdelay(1);
+ write_phy_ofdm(dev, 0x00, 0x01); mdelay(1);
+ write_phy_ofdm(dev, 0x01, 0x02); mdelay(1);
+ write_phy_ofdm(dev, 0x02, ((priv->card_type == USB) ? 0x42 : 0x62)); mdelay(1);
+ write_phy_ofdm(dev, 0x03, 0x00); mdelay(1);
+ write_phy_ofdm(dev, 0x04, 0x00); mdelay(1);
+ write_phy_ofdm(dev, 0x05, 0x00); mdelay(1);
+ write_phy_ofdm(dev, 0x06, 0x40); mdelay(1);
+ write_phy_ofdm(dev, 0x07, 0x00); mdelay(1);
+ write_phy_ofdm(dev, 0x08, 0x40); mdelay(1);
+ write_phy_ofdm(dev, 0x09, 0xfe); mdelay(1);
+ write_phy_ofdm(dev, 0x0a, 0x08); mdelay(1);
+ write_phy_ofdm(dev, 0x0b, 0x80); mdelay(1);
+ write_phy_ofdm(dev, 0x0c, 0x01); mdelay(1);
+ write_phy_ofdm(dev, 0x0d, 0x43);
+ write_phy_ofdm(dev, 0x0e, 0xd3); mdelay(1);
+ write_phy_ofdm(dev, 0x0f, 0x38); mdelay(1);
+ write_phy_ofdm(dev, 0x10, 0x84); mdelay(1);
+ write_phy_ofdm(dev, 0x11, 0x07); mdelay(1);
+ write_phy_ofdm(dev, 0x12, 0x20); mdelay(1);
+ write_phy_ofdm(dev, 0x13, 0x20); mdelay(1);
+ write_phy_ofdm(dev, 0x14, 0x00); mdelay(1);
write_phy_ofdm(dev, 0x15, 0x40); mdelay(1);
- write_phy_ofdm(dev, 0x16, 0x0); mdelay(1);
+ write_phy_ofdm(dev, 0x16, 0x00); mdelay(1);
write_phy_ofdm(dev, 0x17, 0x40); mdelay(1);
-
-// if (priv->card_type == USB)
-// write_phy_ofdm(dev, 0x18, 0xef);
-
- write_phy_ofdm(dev, 0x18, 0xef);mdelay(1);
-
-
+ write_phy_ofdm(dev, 0x18, 0xef); mdelay(1);
write_phy_ofdm(dev, 0x19, 0x19); mdelay(1);
write_phy_ofdm(dev, 0x1a, 0x20); mdelay(1);
- write_phy_ofdm(dev, 0x1b, 0x15);mdelay(1);
-
- write_phy_ofdm(dev, 0x1c, 0x4);mdelay(1);
-
- write_phy_ofdm(dev, 0x1d, 0xc5);mdelay(1); //2005.11.17,
-
- write_phy_ofdm(dev, 0x1e, 0x95);mdelay(1);
-
- write_phy_ofdm(dev, 0x1f, 0x75); mdelay(1);
-
-// }
-
- write_phy_ofdm(dev, 0x20, 0x1f);mdelay(1);
-
- write_phy_ofdm(dev, 0x21, 0x17);mdelay(1);
-
- write_phy_ofdm(dev, 0x22, 0x16);mdelay(1);
-
-// if(priv->card_type != USB)
- write_phy_ofdm(dev, 0x23, 0x80);mdelay(1); //FIXME maybe not needed // <>
-
+ write_phy_ofdm(dev, 0x1b, 0x15); mdelay(1);
+ write_phy_ofdm(dev, 0x1c, 0x04); mdelay(1);
+ write_phy_ofdm(dev, 0x1d, 0xc5); mdelay(1);
+ write_phy_ofdm(dev, 0x1e, 0x95); mdelay(1);
+ write_phy_ofdm(dev, 0x1f, 0x75); mdelay(1);
+ write_phy_ofdm(dev, 0x20, 0x1f); mdelay(1);
+ write_phy_ofdm(dev, 0x21, 0x17); mdelay(1);
+ write_phy_ofdm(dev, 0x22, 0x16); mdelay(1);
+ write_phy_ofdm(dev, 0x23, 0x80); mdelay(1); /* FIXME maybe not needed */
write_phy_ofdm(dev, 0x24, 0x46); mdelay(1);
write_phy_ofdm(dev, 0x25, 0x00); mdelay(1);
write_phy_ofdm(dev, 0x26, 0x90); mdelay(1);
-
write_phy_ofdm(dev, 0x27, 0x88); mdelay(1);

-
- // <> Set init. gain to m74dBm.
-
rtl8225z2_set_gain(dev,4);

write_phy_cck(dev, 0x0, 0x98); mdelay(1);
@@ -986,90 +772,57 @@ void rtl8225z2_rf_init(struct net_device
write_phy_cck(dev, 0x4, 0x7e); mdelay(1);
write_phy_cck(dev, 0x5, 0x12); mdelay(1);
write_phy_cck(dev, 0x6, 0xfc); mdelay(1);
-
- write_phy_cck(dev, 0x7, 0x78);mdelay(1);
- /* Ver C & D & 8187*/
-
- write_phy_cck(dev, 0x8, 0x2e);mdelay(1);
-
+ write_phy_cck(dev, 0x7, 0x78); mdelay(1);
+ write_phy_cck(dev, 0x8, 0x2e); mdelay(1);
write_phy_cck(dev, 0x10, ((priv->card_type == USB) ? 0x9b: 0x93)); mdelay(1);
write_phy_cck(dev, 0x11, 0x88); mdelay(1);
write_phy_cck(dev, 0x12, 0x47); mdelay(1);
- write_phy_cck(dev, 0x13, 0xd0); /* Ver C & D & 8187*/
-
- write_phy_cck(dev, 0x19, 0x0);
+ write_phy_cck(dev, 0x13, 0xd0);
+ write_phy_cck(dev, 0x19, 0x00);
write_phy_cck(dev, 0x1a, 0xa0);
- write_phy_cck(dev, 0x1b, 0x8);
+ write_phy_cck(dev, 0x1b, 0x08);
write_phy_cck(dev, 0x40, 0x86); /* CCK Carrier Sense Threshold */
-
- write_phy_cck(dev, 0x41, 0x8d);mdelay(1);
-
-
+ write_phy_cck(dev, 0x41, 0x8d); mdelay(1);
write_phy_cck(dev, 0x42, 0x15); mdelay(1);
write_phy_cck(dev, 0x43, 0x18); mdelay(1);
-
-
write_phy_cck(dev, 0x44, 0x36); mdelay(1);
write_phy_cck(dev, 0x45, 0x35); mdelay(1);
write_phy_cck(dev, 0x46, 0x2e); mdelay(1);
write_phy_cck(dev, 0x47, 0x25); mdelay(1);
write_phy_cck(dev, 0x48, 0x1c); mdelay(1);
write_phy_cck(dev, 0x49, 0x12); mdelay(1);
- write_phy_cck(dev, 0x4a, 0x9); mdelay(1);
- write_phy_cck(dev, 0x4b, 0x4); mdelay(1);
- write_phy_cck(dev, 0x4c, 0x5);mdelay(1);
-
+ write_phy_cck(dev, 0x4a, 0x09); mdelay(1);
+ write_phy_cck(dev, 0x4b, 0x04); mdelay(1);
+ write_phy_cck(dev, 0x4c, 0x05); mdelay(1);

write_nic_byte(dev, 0x5b, 0x0d); mdelay(1);

-
-
-// <>
-// // TESTR 0xb 8187
-// write_phy_cck(dev, 0x10, 0x93);// & 0xfb);
-//
-// //if(priv->card_type != USB){
-// write_phy_ofdm(dev, 0x2, 0x62);
-// write_phy_ofdm(dev, 0x6, 0x0);
-// write_phy_ofdm(dev, 0x8, 0x0);
-// //}
-
rtl8225z2_SetTXPowerLevel(dev, channel);
- write_phy_cck(dev, 0x11, 0x9b); mdelay(1); /* Rx ant A, 0xdb for B */
- write_phy_ofdm(dev, 0x26, 0x90); mdelay(1); /* Rx ant A, 0x10 for B */

- rtl8185_tx_antenna(dev, 0x3); /* TX ant A, 0x0 for B */
+ /* RX antenna default to A */
+ write_phy_cck(dev, 0x11, 0x9b); mdelay(1); /* B: 0xDB */
+ write_phy_ofdm(dev, 0x26, 0x90); mdelay(1); /* B: 0x10 */
+
+ rtl8185_tx_antenna(dev, 0x03); /* B: 0x00 */

/* switch to high-speed 3-wire
* last digit. 2 for both cck and ofdm
*/
- if(priv->card_type == USB)
+ if (priv->card_type == USB)
write_nic_dword(dev, 0x94, 0x3dc00002);
- else{
+ else {
write_nic_dword(dev, 0x94, 0x15c00002);
rtl8185_rf_pins_enable(dev);
}

-// rtl8225_set_mode(dev, 1); /* FIXME start in B mode */ // <>
-//
-// /* make sure is waken up! */
-// write_rtl8225(dev,0x4, 0x9ff);
-// rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_ON);
-// rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_ON);
-
rtl8225_rf_set_chan(dev, priv->chan);
-
- //write_nic_word(dev,BRSR,brsr);
-
- //rtl8225z2_rf_set_mode(dev);
}

void rtl8225z2_rf_set_mode(struct net_device *dev)
{
struct r8180_priv *priv = ieee80211_priv(dev);

- if(priv->ieee80211->mode == IEEE_A)
- {
+ if (priv->ieee80211->mode == IEEE_A) {
write_rtl8225(dev, 0x5, 0x1865);
write_nic_dword(dev, RF_PARA, 0x10084);
write_nic_dword(dev, RF_TIMING, 0xa8008);
@@ -1085,8 +838,7 @@ void rtl8225z2_rf_set_mode(struct net_de
write_phy_ofdm(dev,0x17, 0x40);

write_nic_dword(dev, 0x94,0x10000000);
- }else{
-
+ } else {
write_rtl8225(dev, 0x5, 0x1864);
write_nic_dword(dev, RF_PARA, 0x10044);
write_nic_dword(dev, RF_TIMING, 0xa8008);
@@ -1105,46 +857,35 @@ void rtl8225z2_rf_set_mode(struct net_de
}
}

-//lzm mod 080826
-//#define MAX_DOZE_WAITING_TIMES_85B 64
-//#define MAX_POLLING_24F_TIMES_87SE 5
#define MAX_DOZE_WAITING_TIMES_85B 20
-#define MAX_POLLING_24F_TIMES_87SE 10
+#define MAX_POLLING_24F_TIMES_87SE 10
#define LPS_MAX_SLEEP_WAITING_TIMES_87SE 5

-bool
-SetZebraRFPowerState8185(
- struct net_device *dev,
- RT_RF_POWER_STATE eRFPowerState
- )
+bool SetZebraRFPowerState8185(struct net_device *dev,
+ RT_RF_POWER_STATE eRFPowerState)
{
struct r8180_priv *priv = ieee80211_priv(dev);
u8 btCR9346, btConfig3;
- bool bActionAllowed= true, bTurnOffBB = true;//lzm mod 080826
- //u32 DWordContent;
+ bool bActionAllowed = true, bTurnOffBB = true;
u8 u1bTmp;
int i;
- //u16 u2bTFPC = 0;
bool bResult = true;
u8 QueueID;

- if(priv->SetRFPowerStateInProgress == true)
+ if (priv->SetRFPowerStateInProgress == true)
return false;

priv->SetRFPowerStateInProgress = true;

- // enable EEM0 and EEM1 in 9346CR
btCR9346 = read_nic_byte(dev, CR9346);
- write_nic_byte(dev, CR9346, (btCR9346|0xC0) );
- // enable PARM_En in Config3
+ write_nic_byte(dev, CR9346, (btCR9346 | 0xC0));
+
btConfig3 = read_nic_byte(dev, CONFIG3);
- write_nic_byte(dev, CONFIG3, (btConfig3|CONFIG3_PARM_En) );
+ write_nic_byte(dev, CONFIG3, (btConfig3 | CONFIG3_PARM_En));

- switch( priv->rf_chip )
- {
+ switch (priv->rf_chip) {
case RF_ZEBRA2:
- switch( eRFPowerState )
- {
+ switch (eRFPowerState) {
case eRfOn:
RF_WriteReg(dev,0x4,0x9FF);

@@ -1153,233 +894,168 @@ SetZebraRFPowerState8185(

write_nic_byte(dev, CONFIG4, priv->RFProgType);

- //Follow 87B, Isaiah 2007-04-27
+ /* turn on CCK and OFDM */
u1bTmp = read_nic_byte(dev, 0x24E);
- write_nic_byte(dev, 0x24E, (u1bTmp & (~(BIT5|BIT6))) );// 070124 SD1 Alex: turn on CCK and OFDM.
+ write_nic_byte(dev, 0x24E, (u1bTmp & (~(BIT5 | BIT6))));
break;
-
case eRfSleep:
break;
-
case eRfOff:
break;
-
default:
bResult = false;
break;
}
break;
-
case RF_ZEBRA4:
- switch( eRFPowerState )
- {
+ switch (eRFPowerState) {
case eRfOn:
- //printk("===================================power on@jiffies:%d\n",jiffies);
write_nic_word(dev, 0x37C, 0x00EC);

- //turn on AFE
+ /* turn on AFE */
write_nic_byte(dev, 0x54, 0x00);
write_nic_byte(dev, 0x62, 0x00);

- //lzm mod 080826
- //turn on RF
- //RF_WriteReg(dev, 0x0, 0x009f); //mdelay(1);
- //RF_WriteReg(dev, 0x4, 0x0972); //mdelay(1);
+ /* turn on RF */
RF_WriteReg(dev, 0x0, 0x009f); udelay(500);
RF_WriteReg(dev, 0x4, 0x0972); udelay(500);
- //turn on RF again, suggested by SD3 stevenl.
+
+ /* turn on RF again */
RF_WriteReg(dev, 0x0, 0x009f); udelay(500);
RF_WriteReg(dev, 0x4, 0x0972); udelay(500);

- //turn on BB
-// write_nic_dword(dev, PhyAddr, 0x4090); //ofdm 10=00
-// write_nic_dword(dev, PhyAddr, 0x4092); //ofdm 12=00
+ /* turn on BB */
write_phy_ofdm(dev,0x10,0x40);
write_phy_ofdm(dev,0x12,0x40);
- //Avoid power down at init time.
+
+ /* Avoid power down at init time. */
write_nic_byte(dev, CONFIG4, priv->RFProgType);

u1bTmp = read_nic_byte(dev, 0x24E);
- write_nic_byte(dev, 0x24E, (u1bTmp & (~(BIT5|BIT6))) );
-
+ write_nic_byte(dev, 0x24E, (u1bTmp & (~(BIT5 | BIT6))));
break;
-
case eRfSleep:
- // Make sure BusyQueue is empty befor turn off RFE pwoer.
- //printk("===================================power sleep@jiffies:%d\n",jiffies);
-
- for(QueueID = 0, i = 0; QueueID < 6; )
- {
- if(get_curr_tx_free_desc(dev,QueueID) == priv->txringcount)
- {
+ for (QueueID = 0, i = 0; QueueID < 6;) {
+ if (get_curr_tx_free_desc(dev, QueueID) == priv->txringcount) {
QueueID++;
continue;
- }
- else//lzm mod 080826
- {
+ } else {
priv->TxPollingTimes ++;
- if(priv->TxPollingTimes >= LPS_MAX_SLEEP_WAITING_TIMES_87SE)
- {
- //RT_TRACE(COMP_POWER, DBG_WARNING, ("\n\n\n SetZebraRFPowerState8185B():eRfSleep: %d times TcbBusyQueue[%d] != 0 !!!\n\n\n", LPS_MAX_SLEEP_WAITING_TIMES_87SE, QueueID));
- bActionAllowed=false;
- break;
- }
- else
- {
- udelay(10); // Windows may delay 3~16ms actually.
- //RT_TRACE(COMP_POWER, DBG_LOUD, ("eRfSleep: %d times TcbBusyQueue[%d] !=0 before doze!\n", (pMgntInfo->TxPollingTimes), QueueID));
- }
+ if (priv->TxPollingTimes >= LPS_MAX_SLEEP_WAITING_TIMES_87SE) {
+ bActionAllowed = false;
+ break;
+ } else
+ udelay(10);
}
-
- //lzm del 080826
- //if(i >= MAX_DOZE_WAITING_TIMES_85B)
- //{
- //printk("\n\n\n SetZebraRFPowerState8185B(): %d times BusyQueue[%d] != 0 !!!\n\n\n", MAX_DOZE_WAITING_TIMES_85B, QueueID);
- //break;
- //}
}

- if(bActionAllowed)//lzm add 080826
- {
- //turn off BB RXIQ matrix to cut off rx signal
-// write_nic_dword(dev, PhyAddr, 0x0090); //ofdm 10=00
-// write_nic_dword(dev, PhyAddr, 0x0092); //ofdm 12=00
- write_phy_ofdm(dev,0x10,0x00);
- write_phy_ofdm(dev,0x12,0x00);
- //turn off RF
- RF_WriteReg(dev, 0x4, 0x0000); //mdelay(1);
- RF_WriteReg(dev, 0x0, 0x0000); //mdelay(1);
- //turn off AFE except PLL
+ if (bActionAllowed) {
+ /* turn off BB RXIQ matrix to cut off rx signal */
+ write_phy_ofdm(dev, 0x10, 0x00);
+ write_phy_ofdm(dev, 0x12, 0x00);
+
+ /* turn off RF */
+ RF_WriteReg(dev, 0x4, 0x0000);
+ RF_WriteReg(dev, 0x0, 0x0000);
+
+ /* turn off AFE except PLL */
write_nic_byte(dev, 0x62, 0xff);
write_nic_byte(dev, 0x54, 0xec);
-// mdelay(10);

-#if 1
mdelay(1);
+
{
int i = 0;
- while (true)
- {
+ while (true) {
u8 tmp24F = read_nic_byte(dev, 0x24f);
- if ((tmp24F == 0x01) || (tmp24F == 0x09))
- {
+
+ if ((tmp24F == 0x01) || (tmp24F == 0x09)) {
bTurnOffBB = true;
break;
- }
- else//lzm mod 080826
- {
+ } else {
udelay(10);
i++;
priv->TxPollingTimes++;

- if(priv->TxPollingTimes >= LPS_MAX_SLEEP_WAITING_TIMES_87SE)
- {
- //RT_TRACE(COMP_POWER, DBG_WARNING, ("\n\n\n SetZebraRFPowerState8185B(): eRfOff: %d times Rx Mac0x24F=0x%x !!!\n\n\n", i, u1bTmp24F));
- bTurnOffBB=false;
+ if (priv->TxPollingTimes >= LPS_MAX_SLEEP_WAITING_TIMES_87SE) {
+ bTurnOffBB = false;
break;
- }
- else
- {
- udelay(10);// Windows may delay 3~16ms actually.
- //RT_TRACE(COMP_POWER, DBG_LOUD,("(%d)eRfSleep- u1bTmp24F= 0x%X\n", i, u1bTmp24F));
-
- }
+ } else
+ udelay(10);
}
-
- //lzm del 080826
- //if (i > MAX_POLLING_24F_TIMES_87SE)
- // break;
}
}
-#endif
- if (bTurnOffBB)//lzm mod 080826
- {
- //turn off BB
- u1bTmp = read_nic_byte(dev, 0x24E);
- write_nic_byte(dev, 0x24E, (u1bTmp|BIT5|BIT6));

- //turn off AFE PLL
- //write_nic_byte(dev, 0x54, 0xec);
- //write_nic_word(dev, 0x37C, 0x00ec);
- write_nic_byte(dev, 0x54, 0xFC); //[ECS] FC-> EC->FC, asked by SD3 Stevenl
- write_nic_word(dev, 0x37C, 0x00FC);//[ECS] FC-> EC->FC, asked by SD3 Stevenl
+ if (bTurnOffBB) {
+ /* turn off BB */
+ u1bTmp = read_nic_byte(dev, 0x24E);
+ write_nic_byte(dev, 0x24E, (u1bTmp | BIT5 | BIT6));
+
+ /* turn off AFE PLL */
+ write_nic_byte(dev, 0x54, 0xFC);
+ write_nic_word(dev, 0x37C, 0x00FC);
}
}
break;
-
case eRfOff:
- // Make sure BusyQueue is empty befor turn off RFE pwoer.
- //printk("===================================power off@jiffies:%d\n",jiffies);
- for(QueueID = 0, i = 0; QueueID < 6; )
- {
- if(get_curr_tx_free_desc(dev,QueueID) == priv->txringcount)
- {
+ for (QueueID = 0, i = 0; QueueID < 6;) {
+ if (get_curr_tx_free_desc(dev, QueueID) == priv->txringcount) {
QueueID++;
continue;
- }
- else
- {
+ } else {
udelay(10);
i++;
}

- if(i >= MAX_DOZE_WAITING_TIMES_85B)
- {
- //printk("\n\n\n SetZebraRFPowerState8185B(): %d times BusyQueue[%d] != 0 !!!\n\n\n", MAX_DOZE_WAITING_TIMES_85B, QueueID);
+ if (i >= MAX_DOZE_WAITING_TIMES_85B)
break;
- }
}

- //turn off BB RXIQ matrix to cut off rx signal
-// write_nic_dword(dev, PhyAddr, 0x0090); //ofdm 10=00
-// write_nic_dword(dev, PhyAddr, 0x0092); //ofdm 12=00
- write_phy_ofdm(dev,0x10,0x00);
- write_phy_ofdm(dev,0x12,0x00);
- //turn off RF
- RF_WriteReg(dev, 0x4, 0x0000); //mdelay(1);
- RF_WriteReg(dev, 0x0, 0x0000); //mdelay(1);
- //turn off AFE except PLL
+ /* turn off BB RXIQ matrix to cut off rx signal */
+ write_phy_ofdm(dev, 0x10, 0x00);
+ write_phy_ofdm(dev, 0x12, 0x00);
+
+ /* turn off RF */
+ RF_WriteReg(dev, 0x4, 0x0000);
+ RF_WriteReg(dev, 0x0, 0x0000);
+
+ /* turn off AFE except PLL */
write_nic_byte(dev, 0x62, 0xff);
write_nic_byte(dev, 0x54, 0xec);
-// mdelay(10);
-#if 1
+
mdelay(1);
+
{
int i = 0;
+
while (true)
{
u8 tmp24F = read_nic_byte(dev, 0x24f);
- if ((tmp24F == 0x01) || (tmp24F == 0x09))
- {
+
+ if ((tmp24F == 0x01) || (tmp24F == 0x09)) {
bTurnOffBB = true;
break;
- }
- else
- {
+ } else {
bTurnOffBB = false;
udelay(10);
i++;
}
+
if (i > MAX_POLLING_24F_TIMES_87SE)
break;
}
}
-#endif
- if (bTurnOffBB)//lzm mod 080826
- {

- //turn off BB
- u1bTmp = read_nic_byte(dev, 0x24E);
- write_nic_byte(dev, 0x24E, (u1bTmp|BIT5|BIT6));
- //turn off AFE PLL (80M)
- //write_nic_byte(dev, 0x54, 0xec);
- //write_nic_word(dev, 0x37C, 0x00ec);
- write_nic_byte(dev, 0x54, 0xFC); //[ECS] FC-> EC->FC, asked by SD3 Stevenl
- write_nic_word(dev, 0x37C, 0x00FC); //[ECS] FC-> EC->FC, asked by SD3 Stevenl
- }
+ if (bTurnOffBB) {
+ /* turn off BB */
+ u1bTmp = read_nic_byte(dev, 0x24E);
+ write_nic_byte(dev, 0x24E, (u1bTmp | BIT5 | BIT6));

+ /* turn off AFE PLL (80M) */
+ write_nic_byte(dev, 0x54, 0xFC);
+ write_nic_word(dev, 0x37C, 0x00FC);
+ }
break;
-
default:
bResult = false;
printk("SetZebraRFPowerState8185(): unknow state to set: 0x%X!!!\n", eRFPowerState);
@@ -1388,38 +1064,26 @@ SetZebraRFPowerState8185(
break;
}

- // disable PARM_En in Config3
btConfig3 &= ~(CONFIG3_PARM_En);
write_nic_byte(dev, CONFIG3, btConfig3);
- // disable EEM0 and EEM1 in 9346CR
+
btCR9346 &= ~(0xC0);
write_nic_byte(dev, CR9346, btCR9346);

- if(bResult && bActionAllowed)//lzm mod 080826
- {
- // Update current RF state variable.
+ if (bResult && bActionAllowed)
priv->eRFPowerState = eRFPowerState;
- }

priv->SetRFPowerStateInProgress = false;

- return (bResult && bActionAllowed) ;
+ return bResult && bActionAllowed;
}
+
void rtl8225z4_rf_sleep(struct net_device *dev)
{
- //
- // Turn off RF power.
- //
- //printk("=========>%s()\n", __func__);
MgntActSet_RF_State(dev, eRfSleep, RF_CHANGE_BY_PS);
- //mdelay(2); //FIXME
}
+
void rtl8225z4_rf_wakeup(struct net_device *dev)
{
- //
- // Turn on RF power.
- //
- //printk("=========>%s()\n", __func__);
MgntActSet_RF_State(dev, eRfOn, RF_CHANGE_BY_PS);
}
-

\
 
 \ /
  Last update: 2009-06-28 16:21    [W:0.171 / U:0.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site