lkml.org 
[lkml]   [2009]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 14/18] Staging: rtl8187se: merge r8180_pm.c with r8180_core.c
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rtl8187se: merge r8180_pm.c with r8180_core.c

* merge r8180_pm.c with r8180_core.c
* make functions static

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/staging/rtl8187se/Makefile | 1
drivers/staging/rtl8187se/r8180_core.c | 63 ++++++++++++++++++++++++++-
drivers/staging/rtl8187se/r8180_pm.c | 74 --------------------------------
drivers/staging/rtl8187se/r8180_pm.h | 24 ----------
drivers/staging/rtl8187se/r8185b_init.c | 2
5 files changed, 61 insertions(+), 103 deletions(-)

Index: b/drivers/staging/rtl8187se/Makefile
===================================================================
--- a/drivers/staging/rtl8187se/Makefile
+++ b/drivers/staging/rtl8187se/Makefile
@@ -25,7 +25,6 @@ rtl8187se-objs := \
r8180_rtl8225z2.o \
r8185b_init.o \
r8180_dm.o \
- r8180_pm.o \
ieee80211/dot11d.o \
ieee80211/ieee80211_softmac.o \
ieee80211/ieee80211_rx.o \
Index: b/drivers/staging/rtl8187se/r8180_core.c
===================================================================
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -22,6 +22,9 @@

A big big thanks goes also to Realtek corp. for their help in my attempt to
add RTL8185 and RTL8225 support, and to David Young also.
+
+ Power management interface routines.
+ Written by Mariusz Matuszek.
*/

#undef RX_DONT_PASS_UL
@@ -37,8 +40,6 @@
#include "r8180_wx.h"
#include "r8180_dm.h"

-#include "r8180_pm.h"
-
#include "ieee80211/dot11d.h"

#ifndef PCI_VENDOR_ID_BELKIN
@@ -121,6 +122,64 @@ static void rtl8180_shutdown (struct pci
pci_disable_device(pdev);
}

+static int rtl8180_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ if (!netif_running(dev))
+ goto out_pci_suspend;
+
+ if (dev->netdev_ops->ndo_stop)
+ dev->netdev_ops->ndo_stop(dev);
+
+ netif_device_detach(dev);
+
+out_pci_suspend:
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ return 0;
+}
+
+static int rtl8180_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ int err;
+ u32 val;
+
+ pci_set_power_state(pdev, PCI_D0);
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
+ dev->name);
+
+ return err;
+ }
+
+ pci_restore_state(pdev);
+
+ /*
+ * Suspend/Resume resets the PCI configuration space, so we have to
+ * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
+ * from interfering with C3 CPU state. pci_restore_state won't help
+ * here since it only restores the first 64 bytes pci config header.
+ */
+ pci_read_config_dword(pdev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+
+ if (!netif_running(dev))
+ goto out;
+
+ if (dev->netdev_ops->ndo_open)
+ dev->netdev_ops->ndo_open(dev);
+
+ netif_device_attach(dev);
+out:
+ return 0;
+}
+
static struct pci_driver rtl8180_pci_driver = {
.name = RTL8180_MODULE_NAME, /* Driver name */
.id_table = rtl8180_pci_id_tbl, /* PCI_ID table */
Index: b/drivers/staging/rtl8187se/r8180_pm.c
===================================================================
--- a/drivers/staging/rtl8187se/r8180_pm.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- Power management interface routines.
- Written by Mariusz Matuszek.
- This code is currently just a placeholder for later work and
- does not do anything useful.
-
- This is part of rtl8180 OpenSource driver.
- Copyright (C) Andrea Merello 2004 <andreamrl@tiscali.it>
- Released under the terms of GPL (General Public Licence)
-*/
-
-
-
-#include "r8180_hw.h"
-#include "r8180_pm.h"
-#include "r8180.h"
-
-int rtl8180_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
-
- if (!netif_running(dev))
- goto out_pci_suspend;
-
- if (dev->netdev_ops->ndo_stop)
- dev->netdev_ops->ndo_stop(dev);
-
- netif_device_detach(dev);
-
-out_pci_suspend:
- pci_save_state(pdev);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
- return 0;
-}
-
-int rtl8180_resume(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- int err;
- u32 val;
-
- pci_set_power_state(pdev, PCI_D0);
-
- err = pci_enable_device(pdev);
- if (err) {
- printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
- dev->name);
-
- return err;
- }
-
- pci_restore_state(pdev);
-
- /*
- * Suspend/Resume resets the PCI configuration space, so we have to
- * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
- * from interfering with C3 CPU state. pci_restore_state won't help
- * here since it only restores the first 64 bytes pci config header.
- */
- pci_read_config_dword(pdev, 0x40, &val);
- if ((val & 0x0000ff00) != 0)
- pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
-
- if (!netif_running(dev))
- goto out;
-
- if (dev->netdev_ops->ndo_open)
- dev->netdev_ops->ndo_open(dev);
-
- netif_device_attach(dev);
-out:
- return 0;
-}
Index: b/drivers/staging/rtl8187se/r8180_pm.h
===================================================================
--- a/drivers/staging/rtl8187se/r8180_pm.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- Power management interface routines.
- Written by Mariusz Matuszek.
- This code is currently just a placeholder for later work and
- does not do anything useful.
-
- This is part of rtl8180 OpenSource driver.
- Copyright (C) Andrea Merello 2004 <andreamrl@tiscali.it>
- Released under the terms of GPL (General Public Licence)
-
-*/
-
-
-#ifndef R8180_PM_H
-#define R8180_PM_H
-
-#include <linux/types.h>
-#include <linux/pci.h>
-
-int rtl8180_suspend (struct pci_dev *pdev, pm_message_t state);
-int rtl8180_resume (struct pci_dev *pdev);
-
-#endif //R8180_PM_H
-
Index: b/drivers/staging/rtl8187se/r8185b_init.c
===================================================================
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -26,8 +26,6 @@ Notes:
#include "r8180_93cx6.h" /* Card EEPROM */
#include "r8180_wx.h"

-#include "r8180_pm.h"
-
#include "ieee80211/dot11d.h"



\
 
 \ /
  Last update: 2009-06-28 16:21    [W:0.247 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site