[lkml]   [2009]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: da9030: ldo11 ignores disable
On Thu, 2009-06-25 at 15:39 +0000, Jonathan Cameron wrote:
> Hi All,
> Whilst testing a regulator machine config I've run into a weird issue.
> The preliminary data sheet I have suggests that there are two enable
> registers
> for ldo11 but neither rctl22 or rctl11 seems to have any effect (on
> their own
> or both cleared together). I can change the voltage just fine, but not
> actually turn it off.
> Anyone come across this problem or have any idea what is going on?

I've come across something similar in the past with two enable bits
causing I2C register cache coherency issues. The cache bits became out
of sync with reality and stopped some I2C writes happening.

Another option is that your hardware config doesn't allow ldo11 to be
disabled ?



 \ /
  Last update: 2009-06-26 11:47    [W:0.376 / U:1.360 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site