lkml.org 
[lkml]   [2009]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 08/20] omapfb: Add support for the OMAP3 Beagle DVI output
Date
From: Koen Kooi <koen@openembedded.org>

The default resolution is 1024x768@24bit

This version addresses the comments from Felipe Balbi adn Arun Edarath

Fixed-by: Felipe Contreras <felipe.contreras@gmail.com>
Fixed-by: Steve Sakoman <steve@sakoman.com>
Fixed-by: Jarkko Nikula <jarkko.nikula@gmail.com>
Fixed-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Koen Kooi <koen@openembedded.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
---
arch/arm/configs/omap3_beagle_defconfig | 47 +++++++++++-
drivers/video/omap/Makefile | 1 +
drivers/video/omap/lcd_omap3beagle.c | 130 +++++++++++++++++++++++++++++++
3 files changed, 177 insertions(+), 1 deletions(-)
create mode 100644 drivers/video/omap/lcd_omap3beagle.c

diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index 4c6fb7e..c4726f0 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -769,7 +769,33 @@ CONFIG_DAB=y
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
@@ -782,6 +808,25 @@ CONFIG_DAB=y
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index 4345157..9ff1815 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -31,6 +31,7 @@ objs-y$(CONFIG_MACH_OMAP_2430SDP) += lcd_2430sdp.o
objs-y$(CONFIG_MACH_OMAP_3430SDP) += lcd_2430sdp.o
objs-y$(CONFIG_MACH_OMAP2EVM) += lcd_omap2evm.o
objs-y$(CONFIG_MACH_OMAP3EVM) += lcd_omap3evm.o
+objs-y$(CONFIG_MACH_OMAP3_BEAGLE) += lcd_omap3beagle.o
objs-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o

omapfb-objs := $(objs-yy)
diff --git a/drivers/video/omap/lcd_omap3beagle.c b/drivers/video/omap/lcd_omap3beagle.c
new file mode 100644
index 0000000..4011910
--- /dev/null
+++ b/drivers/video/omap/lcd_omap3beagle.c
@@ -0,0 +1,130 @@
+/*
+ * LCD panel support for the TI OMAP3 Beagle board
+ *
+ * Author: Koen Kooi <koen@openembedded.org>
+ *
+ * Derived from drivers/video/omap/lcd-omap3evm.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/i2c/twl4030.h>
+
+#include <mach/mux.h>
+#include <mach/omapfb.h>
+#include <asm/mach-types.h>
+
+#define LCD_PANEL_ENABLE_GPIO 170
+
+static int omap3beagle_panel_init(struct lcd_panel *panel,
+ struct omapfb_device *fbdev)
+{
+ gpio_request(LCD_PANEL_ENABLE_GPIO, "LCD enable");
+ return 0;
+}
+
+static void omap3beagle_panel_cleanup(struct lcd_panel *panel)
+{
+ gpio_free(LCD_PANEL_ENABLE_GPIO);
+}
+
+static int omap3beagle_panel_enable(struct lcd_panel *panel)
+{
+ gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1);
+ return 0;
+}
+
+static void omap3beagle_panel_disable(struct lcd_panel *panel)
+{
+ gpio_set_value(LCD_PANEL_ENABLE_GPIO, 0);
+}
+
+static unsigned long omap3beagle_panel_get_caps(struct lcd_panel *panel)
+{
+ return 0;
+}
+
+struct lcd_panel omap3beagle_panel = {
+ .name = "omap3beagle",
+ .config = OMAP_LCDC_PANEL_TFT,
+
+ .bpp = 16,
+ .data_lines = 24,
+ .x_res = 1024,
+ .y_res = 768,
+ .hsw = 3, /* hsync_len (4) - 1 */
+ .hfp = 3, /* right_margin (4) - 1 */
+ .hbp = 39, /* left_margin (40) - 1 */
+ .vsw = 1, /* vsync_len (2) - 1 */
+ .vfp = 2, /* lower_margin */
+ .vbp = 7, /* upper_margin (8) - 1 */
+
+ .pixel_clock = 64000,
+
+ .init = omap3beagle_panel_init,
+ .cleanup = omap3beagle_panel_cleanup,
+ .enable = omap3beagle_panel_enable,
+ .disable = omap3beagle_panel_disable,
+ .get_caps = omap3beagle_panel_get_caps,
+};
+
+static int omap3beagle_panel_probe(struct platform_device *pdev)
+{
+ omapfb_register_panel(&omap3beagle_panel);
+ return 0;
+}
+
+static int omap3beagle_panel_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static int omap3beagle_panel_suspend(struct platform_device *pdev,
+ pm_message_t mesg)
+{
+ return 0;
+}
+
+static int omap3beagle_panel_resume(struct platform_device *pdev)
+{
+ return 0;
+}
+
+struct platform_driver omap3beagle_panel_driver = {
+ .probe = omap3beagle_panel_probe,
+ .remove = omap3beagle_panel_remove,
+ .suspend = omap3beagle_panel_suspend,
+ .resume = omap3beagle_panel_resume,
+ .driver = {
+ .name = "omap3beagle_lcd",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init omap3beagle_panel_drv_init(void)
+{
+ return platform_driver_register(&omap3beagle_panel_driver);
+}
+
+static void __exit omap3beagle_panel_drv_exit(void)
+{
+ platform_driver_unregister(&omap3beagle_panel_driver);
+}
+
+module_init(omap3beagle_panel_drv_init);
+module_exit(omap3beagle_panel_drv_exit);
--
1.6.3.2


\
 
 \ /
  Last update: 2009-06-24 13:43    [W:0.125 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site