lkml.org 
[lkml]   [2009]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/8] SFI: Simple Firmware Interface - new Linux sub-system
Date
From: Len Brown <len.brown@intel.com>

CONFIG_SFI=y enables the kernel to boot and run optimally
on platforms that support the Simple Firmware Interface.

Thanks to Jacob Pan for prototyping the initial Linux SFI support,
and to Feng Tang for Linux bring-up and debug in emulation
and on hardware.

See http://simplefirmware.org for more information on SFI.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
Documentation/kernel-parameters.txt | 5 +++++
MAINTAINERS | 12 ++++++++++++
arch/x86/Kconfig | 2 ++
drivers/sfi/Kconfig | 16 ++++++++++++++++
4 files changed, 35 insertions(+), 0 deletions(-)
create mode 100644 drivers/sfi/Kconfig

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index fd5cac0..a4797d6 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -92,6 +92,7 @@ parameter is applicable:
SECURITY Different security models are enabled.
SELINUX SELinux support is enabled.
SERIAL Serial support is enabled.
+ SFI Simple Firmware Interface
SH SuperH architecture is enabled.
SMP The kernel is an SMP kernel.
SPARC Sparc architecture is enabled.
@@ -2082,6 +2083,10 @@ and is between 256 and 4096 characters. It is defined in the file
If enabled at boot time, /selinux/disable can be used
later to disable prior to initial policy load.

+ sfi= [SFI,X86] Simple Firmware Interface
+ Format: { "off" }
+ off -- disable SFI
+
serialnumber [BUGS=X86-32]

shapers= [NET]
diff --git a/MAINTAINERS b/MAINTAINERS
index cf4abdd..1939b4c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5105,6 +5105,18 @@ L: linux-pci@vger.kernel.org
S: Supported
F: drivers/pci/hotplug/shpchp*

+SIMPLE FIRMWARE INTERFACE (SFI)
+P: Len Brown
+M: lenb@kernel.org
+L: sfi-devel@simplefirmware.org
+W: http://simplefirmware.org/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6.git
+S: Supported
+F: arch/x86/kernel/*sfi*
+F: drivers/sfi/
+F: include/linux/sfi*.h
+
+
SIMTEC EB110ATX (Chalice CATS)
P: Ben Dooks
P: Vincent Sanders
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index a6efe0a..06341a5 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1641,6 +1641,8 @@ source "kernel/power/Kconfig"

source "drivers/acpi/Kconfig"

+source "drivers/sfi/Kconfig"
+
config X86_APM_BOOT
bool
default y
diff --git a/drivers/sfi/Kconfig b/drivers/sfi/Kconfig
new file mode 100644
index 0000000..b217f32
--- /dev/null
+++ b/drivers/sfi/Kconfig
@@ -0,0 +1,16 @@
+#
+# SFI Configuration
+#
+
+menuconfig SFI
+ bool "SFI (Simple Firmware Interface) Support"
+ depends on X86
+ default n
+ ---help---
+ The Simple Firmware Interface (SFI) provides a lightweight method
+ for platform firmware to pass information to the Operating System
+ via static tables in memory.
+
+ For more information, see http://simplefirmware.org
+
+ Say 'Y' here to enable the kernel to boot on SFI-only platforms.
--
1.6.0.6


\
 
 \ /
  Last update: 2009-06-23 09:17    [W:0.152 / U:1.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site