lkml.org 
[lkml]   [2009]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] serial: 8250: add IRQ trigger support
* Vikram Pandita <vikram.pandita@ti.com> [090623 02:20]:
> There is currently no provision for passing IRQ trigger flags for
> serial IRQs with triggering requirements (such as GPIO IRQs)
>
> This patch adds irqflags to plat_serial8250_port that can be passed
> from board file to reqest_irq() of 8250 driver
>
> Changes are backward compatible with boards passing UPF_SHARE_IRQ flag

How about just fix all the instances of UPF_SHARE_IRQ and make them
use irqflags there are not too many instances of that?

Otherwise we're just piling more hacks to the driver..

Also, the irqflags may need to be initialized in some cases for
struct uart_port, so that should be checked.

Regards,

Tony

> Tested on Zoom2 board that has IRQF_TRIGGER_RISING requirement for 8250 irq
>
> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
> ---
> drivers/serial/8250.c | 14 +++++++++-----
> drivers/serial/8250.h | 1 +
> include/linux/serial_8250.h | 1 +
> include/linux/serial_core.h | 1 +
> 4 files changed, 12 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
> index bab115e..d18a4c0 100644
> --- a/drivers/serial/8250.c
> +++ b/drivers/serial/8250.c
> @@ -1674,7 +1674,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
> INIT_LIST_HEAD(&up->list);
> i->head = &up->list;
> spin_unlock_irq(&i->lock);
> -
> + irq_flags |= up->port.irqflags;
> ret = request_irq(up->port.irq, serial8250_interrupt,
> irq_flags, "serial", i);
> if (ret < 0)
> @@ -2023,7 +2023,7 @@ static int serial8250_startup(struct uart_port *port)
> * allow register changes to become visible.
> */
> spin_lock_irqsave(&up->port.lock, flags);
> - if (up->port.flags & UPF_SHARE_IRQ)
> + if (up->port.irqflags & IRQF_SHARED)
> disable_irq_nosync(up->port.irq);
>
> wait_for_xmitr(up, UART_LSR_THRE);
> @@ -2036,7 +2036,7 @@ static int serial8250_startup(struct uart_port *port)
> iir = serial_in(up, UART_IIR);
> serial_out(up, UART_IER, 0);
>
> - if (up->port.flags & UPF_SHARE_IRQ)
> + if (up->port.irqflags & IRQF_SHARED)
> enable_irq(up->port.irq);
> spin_unlock_irqrestore(&up->port.lock, flags);
>
> @@ -2681,6 +2681,7 @@ static void __init serial8250_isa_init_ports(void)
> i++, up++) {
> up->port.iobase = old_serial_port[i].port;
> up->port.irq = irq_canonicalize(old_serial_port[i].irq);
> + up->port.irqflags = old_serial_port[i].irqflags;
> up->port.uartclk = old_serial_port[i].baud_base * 16;
> up->port.flags = old_serial_port[i].flags;
> up->port.hub6 = old_serial_port[i].hub6;
> @@ -2689,7 +2690,7 @@ static void __init serial8250_isa_init_ports(void)
> up->port.regshift = old_serial_port[i].iomem_reg_shift;
> set_io_from_upio(&up->port);
> if (share_irqs)
> - up->port.flags |= UPF_SHARE_IRQ;
> + up->port.irqflags |= IRQF_SHARED;
> }
> }
>
> @@ -2879,6 +2880,7 @@ int __init early_serial_setup(struct uart_port *port)
> p->iobase = port->iobase;
> p->membase = port->membase;
> p->irq = port->irq;
> + p->irqflags = port->irqflags;
> p->uartclk = port->uartclk;
> p->fifosize = port->fifosize;
> p->regshift = port->regshift;
> @@ -2952,6 +2954,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
> port.iobase = p->iobase;
> port.membase = p->membase;
> port.irq = p->irq;
> + port.irqflags = p->irqflags;
> port.uartclk = p->uartclk;
> port.regshift = p->regshift;
> port.iotype = p->iotype;
> @@ -2964,7 +2967,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
> port.serial_out = p->serial_out;
> port.dev = &dev->dev;
> if (share_irqs)
> - port.flags |= UPF_SHARE_IRQ;
> + port.irqflags |= IRQF_SHARED;
> ret = serial8250_register_port(&port);
> if (ret < 0) {
> dev_err(&dev->dev, "unable to register port at index %d "
> @@ -3106,6 +3109,7 @@ int serial8250_register_port(struct uart_port *port)
> uart->port.iobase = port->iobase;
> uart->port.membase = port->membase;
> uart->port.irq = port->irq;
> + uart->port.irqflags = port->irqflags;
> uart->port.uartclk = port->uartclk;
> uart->port.fifosize = port->fifosize;
> uart->port.regshift = port->regshift;
> diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
> index 5202603..9b34b04 100644
> --- a/drivers/serial/8250.h
> +++ b/drivers/serial/8250.h
> @@ -20,6 +20,7 @@ struct old_serial_port {
> unsigned int baud_base;
> unsigned int port;
> unsigned int irq;
> + unsigned long irqflags;
> unsigned int flags;
> unsigned char hub6;
> unsigned char io_type;
> diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
> index d4d2a78..fb46aba 100644
> --- a/include/linux/serial_8250.h
> +++ b/include/linux/serial_8250.h
> @@ -22,6 +22,7 @@ struct plat_serial8250_port {
> void __iomem *membase; /* ioremap cookie or NULL */
> resource_size_t mapbase; /* resource base */
> unsigned int irq; /* interrupt number */
> + unsigned long irqflags; /* request_irq flags */
> unsigned int uartclk; /* UART clock rate */
> void *private_data;
> unsigned char regshift; /* register shift */
> diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
> index 57a97e5..a8635ef 100644
> --- a/include/linux/serial_core.h
> +++ b/include/linux/serial_core.h
> @@ -258,6 +258,7 @@ struct uart_port {
> unsigned int (*serial_in)(struct uart_port *, int);
> void (*serial_out)(struct uart_port *, int, int);
> unsigned int irq; /* irq number */
> + unsigned long irqflags; /* irq flags */
> unsigned int uartclk; /* base uart clock */
> unsigned int fifosize; /* tx fifo size */
> unsigned char x_char; /* xon/xoff char */
> --
> 1.6.0.3.613.g9f8f13
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html


\
 
 \ /
  Last update: 2009-06-23 09:09    [W:0.056 / U:1.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site