lkml.org 
[lkml]   [2009]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5] DaVinci: MMC: MMC/SD controller driver for DaVinci family.
Date
This patch adds support for MMC/SD controller driver for all DaVinci family
SoC. This patch supports davinci family SoC's DM6446, DM355, DM365 and
DA830/OMAPL137.

The patch has been tested on DM355 EVM.

The MMCSD controller specifications for DM355 can be found at
http://focus.ti.com/general/docs/litabsmultiplefilelist.tsp?literatureNumber=spruee2c

Signed-off-by: Vipin Bhandari <vipin.bhandari@ti.com>
Signed-off-by: Purshotam Kumar <purushotam@ti.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
---
This patch has been generated against latest Linus's kernel.

Since the pervious patch, the scatterlist traversal is made proper. The patch
sets the value written to the DAVINCI_MMCTOR register properly. The timeout
calculation is made proper by deriving it from the clock values.

Many thanks to David Brownell (david-b@pacbell.net) for all his support.

This updated patch incorporates most of review comments given by Pierre Ossman.
Many thanks for Pierre Ossman for reviewing.

drivers/mmc/host/Kconfig | 8 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/davinci_mmc.c | 1281 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 1290 insertions(+), 0 deletions(-)
create mode 100644 drivers/mmc/host/davinci_mmc.c

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 891ef18..b5adcba 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -236,6 +236,14 @@ config MMC_MVSDIO
To compile this driver as a module, choose M here: the
module will be called mvsdio.

+config MMC_DAVINCI
+ tristate "TI DAVINCI Multimedia Card Interface support"
+ depends on ARCH_DAVINCI
+ help
+ This selects the TI DAVINCI Multimedia card Interface.
+ If you have an DAVINCI board with a Multimedia Card slot,
+ say Y or M here. If unsure, say N.
+
config MMC_SPI
tristate "MMC/SD/SDIO over SPI"
depends on SPI_MASTER && !HIGHMEM && HAS_DMA
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index cf153f6..784bde1 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_MMC_AT91) += at91_mci.o
obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
obj-$(CONFIG_MMC_MVSDIO) += mvsdio.o
+obj-$(CONFIG_MMC_DAVINCI) += davinci_mmc.o
obj-$(CONFIG_MMC_SPI) += mmc_spi.o
ifeq ($(CONFIG_OF),y)
obj-$(CONFIG_MMC_SPI) += of_mmc_spi.o
diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c
new file mode 100644
index 0000000..5caa542
--- /dev/null
+++ b/drivers/mmc/host/davinci_mmc.c
@@ -0,0 +1,1281 @@
+/*
+ * davinci_mmc.c - TI DaVinci MMC/SD/SDIO driver
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Original author: Purushotam Kumar
+ * Copyright (C) 2009 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/mmc/host.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/mmc/mmc.h>
+
+#include <mach/mmc.h>
+#include <mach/edma.h>
+
+/*
+ * Register Definitions
+ */
+#define DAVINCI_MMCCTL 0x00 /* Control Register */
+#define DAVINCI_MMCCLK 0x04 /* Memory Clock Control Register */
+#define DAVINCI_MMCST0 0x08 /* Status Register 0 */
+#define DAVINCI_MMCST1 0x0C /* Status Register 1 */
+#define DAVINCI_MMCIM 0x10 /* Interrupt Mask Register */
+#define DAVINCI_MMCTOR 0x14 /* Response Time-Out Register */
+#define DAVINCI_MMCTOD 0x18 /* Data Read Time-Out Register */
+#define DAVINCI_MMCBLEN 0x1C /* Block Length Register */
+#define DAVINCI_MMCNBLK 0x20 /* Number of Blocks Register */
+#define DAVINCI_MMCNBLC 0x24 /* Number of Blocks Counter Register */
+#define DAVINCI_MMCDRR 0x28 /* Data Receive Register */
+#define DAVINCI_MMCDXR 0x2C /* Data Transmit Register */
+#define DAVINCI_MMCCMD 0x30 /* Command Register */
+#define DAVINCI_MMCARGHL 0x34 /* Argument Register */
+#define DAVINCI_MMCRSP01 0x38 /* Response Register 0 and 1 */
+#define DAVINCI_MMCRSP23 0x3C /* Response Register 0 and 1 */
+#define DAVINCI_MMCRSP45 0x40 /* Response Register 0 and 1 */
+#define DAVINCI_MMCRSP67 0x44 /* Response Register 0 and 1 */
+#define DAVINCI_MMCDRSP 0x48 /* Data Response Register */
+#define DAVINCI_MMCETOK 0x4C
+#define DAVINCI_MMCCIDX 0x50 /* Command Index Register */
+#define DAVINCI_MMCCKC 0x54
+#define DAVINCI_MMCTORC 0x58
+#define DAVINCI_MMCTODC 0x5C
+#define DAVINCI_MMCBLNC 0x60
+#define DAVINCI_SDIOCTL 0x64
+#define DAVINCI_SDIOST0 0x68
+#define DAVINCI_SDIOEN 0x6C
+#define DAVINCI_SDIOST 0x70
+#define DAVINCI_MMCFIFOCTL 0x74 /* FIFO Control Register */
+
+/* DAVINCI_MMCCTL definitions */
+#define MMCCTL_DATRST (1 << 0)
+#define MMCCTL_CMDRST (1 << 1)
+#define MMCCTL_WIDTH_4_BIT (1 << 2)
+#define MMCCTL_DATEG_DISABLED (0 << 6)
+#define MMCCTL_DATEG_RISING (1 << 6)
+#define MMCCTL_DATEG_FALLING (2 << 6)
+#define MMCCTL_DATEG_BOTH (3 << 6)
+#define MMCCTL_PERMDR_LE (0 << 9)
+#define MMCCTL_PERMDR_BE (1 << 9)
+#define MMCCTL_PERMDX_LE (0 << 10)
+#define MMCCTL_PERMDX_BE (1 << 10)
+
+/* DAVINCI_MMCCLK definitions */
+#define MMCCLK_CLKEN (1 << 8)
+#define MMCCLK_CLKRT_MASK (0xFF << 0)
+
+/* IRQ bit definitions, for DAVINCI_MMCST0 and DAVINCI_MMCIM */
+#define MMCST0_DATDNE BIT(0) /* data done */
+#define MMCST0_BSYDNE BIT(1) /* busy done */
+#define MMCST0_RSPDNE BIT(2) /* command done */
+#define MMCST0_TOUTRD BIT(3) /* data read timeout */
+#define MMCST0_TOUTRS BIT(4) /* command response timeout */
+#define MMCST0_CRCWR BIT(5) /* data write CRC error */
+#define MMCST0_CRCRD BIT(6) /* data read CRC error */
+#define MMCST0_CRCRS BIT(7) /* command response CRC error */
+#define MMCST0_DXRDY BIT(9) /* data transmit ready (fifo empty) */
+#define MMCST0_DRRDY BIT(10) /* data receive ready (data in fifo)*/
+#define MMCST0_DATED BIT(11) /* DAT3 edge detect */
+#define MMCST0_TRNDNE BIT(12) /* transfer done */
+
+/* DAVINCI_MMCST1 definitions */
+#define MMCST1_BUSY (1 << 0)
+
+/* DAVINCI_MMCCMD definitions */
+#define MMCCMD_CMD_MASK (0x3F << 0)
+#define MMCCMD_PPLEN (1 << 7)
+#define MMCCMD_BSYEXP (1 << 8)
+#define MMCCMD_RSPFMT_MASK (3 << 9)
+#define MMCCMD_RSPFMT_NONE (0 << 9)
+#define MMCCMD_RSPFMT_R1456 (1 << 9)
+#define MMCCMD_RSPFMT_R2 (2 << 9)
+#define MMCCMD_RSPFMT_R3 (3 << 9)
+#define MMCCMD_DTRW (1 << 11)
+#define MMCCMD_STRMTP (1 << 12)
+#define MMCCMD_WDATX (1 << 13)
+#define MMCCMD_INITCK (1 << 14)
+#define MMCCMD_DCLR (1 << 15)
+#define MMCCMD_DMATRIG (1 << 16)
+
+/* DAVINCI_MMCFIFOCTL definitions */
+#define MMCFIFOCTL_FIFORST (1 << 0)
+#define MMCFIFOCTL_FIFODIR_WR (1 << 1)
+#define MMCFIFOCTL_FIFODIR_RD (0 << 1)
+#define MMCFIFOCTL_FIFOLEV (1 << 2) /* 0 = 128 bits, 1 = 256 bits */
+#define MMCFIFOCTL_ACCWD_4 (0 << 3) /* access width of 4 bytes */
+#define MMCFIFOCTL_ACCWD_3 (1 << 3) /* access width of 3 bytes */
+#define MMCFIFOCTL_ACCWD_2 (2 << 3) /* access width of 2 bytes */
+#define MMCFIFOCTL_ACCWD_1 (3 << 3) /* access width of 1 byte */
+
+
+/* MMCSD Init clock in Hz in opendrain mode */
+#define MMCSD_INIT_CLOCK 200000
+
+/*
+ * One scatterlist dma "segment" is at most MAX_CCNT rw_threshold units,
+ * and we handle up to NR_SG segments. MMC_BLOCK_BOUNCE kicks in only
+ * for drivers with max_hw_segs == 1, making the segments bigger (64KB)
+ * than the page or two that's otherwise typical. NR_SG == 16 gives at
+ * least the same throughput boost, using EDMA transfer linkage instead
+ * of spending CPU time copying pages.
+ */
+#define MAX_CCNT ((1 << 16) - 1)
+
+#define NR_SG 16
+
+static unsigned rw_threshold = 32;
+module_param(rw_threshold, uint, S_IRUGO);
+MODULE_PARM_DESC(rw_threshold,
+ "Read/Write threshold. Default = 32");
+
+static unsigned __initdata use_dma = 1;
+module_param(use_dma, uint, 0);
+MODULE_PARM_DESC(use_dma, "Whether to use DMA or not. Default = 1");
+
+struct mmc_davinci_host {
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+ struct mmc_host *mmc;
+ struct clk *clk;
+ unsigned int mmc_input_clk;
+ void __iomem *base;
+ struct resource *mem_res;
+ int irq;
+ unsigned char bus_mode;
+
+#define DAVINCI_MMC_DATADIR_NONE 0
+#define DAVINCI_MMC_DATADIR_READ 1
+#define DAVINCI_MMC_DATADIR_WRITE 2
+ unsigned char data_dir;
+
+ /* buffer is used during PIO of one scatterlist segment, and
+ * is updated along with buffer_bytes_left. bytes_left applies
+ * to all N blocks of the PIO transfer.
+ */
+ u8 *buffer;
+ u32 buffer_bytes_left;
+ u32 bytes_left;
+
+ u8 rxdma, txdma;
+ bool use_dma;
+ bool do_dma;
+
+ /* Scatterlist DMA uses one or more parameter RAM entries:
+ * the main one (associated with rxdma or txdma) plus zero or
+ * more links. The entries for a given transfer differ only
+ * by memory buffer (address, length) and link field.
+ */
+ struct edmacc_param tx_template;
+ struct edmacc_param rx_template;
+ unsigned n_link;
+ u8 links[NR_SG - 1];
+
+ /* For PIO we walk scatterlists one segment at a time. */
+ unsigned int sg_len;
+ struct scatterlist *sg;
+
+ /* Version of the MMC/SD controller */
+ u8 version;
+ /* for ns in one cycle calculation */
+ unsigned ns_in_one_cycle;
+};
+
+
+/* PIO only */
+static void mmc_davinci_sg_to_buf(struct mmc_davinci_host *host)
+{
+ host->buffer_bytes_left = sg_dma_len(host->sg);
+ host->buffer = sg_virt(host->sg);
+ if (host->buffer_bytes_left > host->bytes_left)
+ host->buffer_bytes_left = host->bytes_left;
+}
+
+static void davinci_fifo_data_trans(struct mmc_davinci_host *host,
+ unsigned int n)
+{
+ u8 *p;
+ unsigned int i;
+
+ if (host->buffer_bytes_left == 0) {
+ host->sg = sg_next(host->data->sg);
+ mmc_davinci_sg_to_buf(host);
+ }
+
+ p = host->buffer;
+ if (n > host->buffer_bytes_left)
+ n = host->buffer_bytes_left;
+ host->buffer_bytes_left -= n;
+ host->bytes_left -= n;
+
+ /* NOTE: we never transfer more than rw_threshold bytes
+ * to/from the fifo here; there's no I/O overlap.
+ * This also assumes that access width( i.e. ACCWD) is 4 bytes
+ */
+ if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE) {
+ for (i = 0; i < (n >> 2); i++) {
+ writel(*((u32 *)p), host->base + DAVINCI_MMCDXR);
+ p = p + 4;
+ }
+ if (n & 3) {
+ iowrite8_rep(host->base + DAVINCI_MMCDXR, p, (n & 3));
+ p = p + (n & 3);
+ }
+ } else {
+ for (i = 0; i < (n >> 2); i++) {
+ *((u32 *)p) = readl(host->base + DAVINCI_MMCDRR);
+ p = p + 4;
+ }
+ if (n & 3) {
+ ioread8_rep(host->base + DAVINCI_MMCDRR, p, (n & 3));
+ p = p + (n & 3);
+ }
+ }
+ host->buffer = p;
+}
+
+static void mmc_davinci_start_command(struct mmc_davinci_host *host,
+ struct mmc_command *cmd)
+{
+ u32 cmd_reg = 0;
+ u32 im_val;
+
+ dev_dbg(mmc_dev(host->mmc), "CMD%d, arg 0x%08x%s\n",
+ cmd->opcode, cmd->arg,
+ ({ char *s;
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_R1:
+ s = ", R1/R5/R6/R7 response";
+ break;
+ case MMC_RSP_R1B:
+ s = ", R1b response";
+ break;
+ case MMC_RSP_R2:
+ s = ", R2 response";
+ break;
+ case MMC_RSP_R3:
+ s = ", R3/R4 response";
+ break;
+ default:
+ s = ", (R? response)";
+ break;
+ }; s; }));
+ host->cmd = cmd;
+
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_R1B:
+ /* There's some spec confusion about when R1B is
+ * allowed, but if the card doesn't issue a BUSY
+ * then it's harmless for us to allow it.
+ */
+ cmd_reg |= MMCCMD_BSYEXP;
+ /* FALLTHROUGH */
+ case MMC_RSP_R1: /* 48 bits, CRC */
+ cmd_reg |= MMCCMD_RSPFMT_R1456;
+ break;
+ case MMC_RSP_R2: /* 136 bits, CRC */
+ cmd_reg |= MMCCMD_RSPFMT_R2;
+ break;
+ case MMC_RSP_R3: /* 48 bits, no CRC */
+ cmd_reg |= MMCCMD_RSPFMT_R3;
+ break;
+ default:
+ cmd_reg |= MMCCMD_RSPFMT_NONE;
+ dev_dbg(mmc_dev(host->mmc), "unknown resp_type %04x\n",
+ mmc_resp_type(cmd));
+ break;
+ }
+
+ /* Set command index */
+ cmd_reg |= cmd->opcode;
+
+ /* Enable EDMA transfer triggers */
+ if (host->do_dma)
+ cmd_reg |= MMCCMD_DMATRIG;
+
+ if (host->version == MMC_CTLR_VERSION_2 && host->data != NULL &&
+ host->data_dir == DAVINCI_MMC_DATADIR_READ)
+ cmd_reg |= MMCCMD_DMATRIG;
+
+ /* Setting whether command involves data transfer or not */
+ if (cmd->data)
+ cmd_reg |= MMCCMD_WDATX;
+
+ /* Setting whether stream or block transfer */
+ if (cmd->flags & MMC_DATA_STREAM)
+ cmd_reg |= MMCCMD_STRMTP;
+
+ /* Setting whether data read or write */
+ if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE)
+ cmd_reg |= MMCCMD_DTRW;
+
+ if (host->bus_mode == MMC_BUSMODE_PUSHPULL)
+ cmd_reg |= MMCCMD_PPLEN;
+
+ /* set Command timeout */
+ writel(0x1FFF, host->base + DAVINCI_MMCTOR);
+
+ /* Enable interrupt (calculate here, defer until FIFO is stuffed). */
+ im_val = MMCST0_RSPDNE | MMCST0_CRCRS | MMCST0_TOUTRS;
+ if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE) {
+ im_val |= MMCST0_DATDNE | MMCST0_CRCWR;
+
+ if (!host->do_dma)
+ im_val |= MMCST0_DXRDY;
+ } else if (host->data_dir == DAVINCI_MMC_DATADIR_READ) {
+ im_val |= MMCST0_DATDNE | MMCST0_CRCRD | MMCST0_TOUTRD;
+
+ if (!host->do_dma)
+ im_val |= MMCST0_DRRDY;
+ }
+
+ /*
+ * Before non-DMA WRITE commands the controller needs priming:
+ * FIFO should be populated with 32 bytes i.e. whatever is the FIFO size
+ */
+ if (!host->do_dma && (host->data_dir == DAVINCI_MMC_DATADIR_WRITE))
+ davinci_fifo_data_trans(host, rw_threshold);
+
+ writel(cmd->arg, host->base + DAVINCI_MMCARGHL);
+ writel(cmd_reg, host->base + DAVINCI_MMCCMD);
+ writel(im_val, host->base + DAVINCI_MMCIM);
+}
+
+/*----------------------------------------------------------------------*/
+
+/* DMA infrastructure */
+
+static void davinci_abort_dma(struct mmc_davinci_host *host)
+{
+ int sync_dev;
+
+ if (host->data_dir == DAVINCI_MMC_DATADIR_READ)
+ sync_dev = host->rxdma;
+ else
+ sync_dev = host->txdma;
+
+ edma_stop(sync_dev);
+ edma_clean_channel(sync_dev);
+}
+
+static void
+mmc_davinci_xfer_done(struct mmc_davinci_host *host, struct mmc_data *data);
+
+static void mmc_davinci_dma_cb(unsigned channel, u16 ch_status, void *data)
+{
+ if (DMA_COMPLETE != ch_status) {
+ struct mmc_davinci_host *host = data;
+
+ /* Currently means: DMA Event Missed, or "null" transfer
+ * request was seen. In the future, TC errors (like bad
+ * addresses) might be presented too.
+ */
+ dev_warn(mmc_dev(host->mmc), "DMA %s error\n",
+ (host->data->flags & MMC_DATA_WRITE)
+ ? "write" : "read");
+ host->data->error = -EIO;
+ mmc_davinci_xfer_done(host, host->data);
+ }
+}
+
+/* Set up tx or rx template, to be modified and updated later */
+static void __init mmc_davinci_dma_setup(struct mmc_davinci_host *host,
+ bool tx, struct edmacc_param *template)
+{
+ unsigned sync_dev;
+ const u16 acnt = 4;
+ const u16 bcnt = rw_threshold >> 2;
+ const u16 ccnt = 0;
+ u32 src_port = 0;
+ u32 dst_port = 0;
+ s16 src_bidx, dst_bidx;
+ s16 src_cidx, dst_cidx;
+
+ /*
+ * A-B Sync transfer: each DMA request is for one "frame" of
+ * rw_threshold bytes, broken into "acnt"-size chunks repeated
+ * "bcnt" times. Each segment needs "ccnt" such frames; since
+ * we tell the block layer our mmc->max_seg_size limit, we can
+ * trust (later) that it's within bounds.
+ *
+ * The FIFOs are read/written in 4-byte chunks (acnt == 4) and
+ * EDMA will optimize memory operations to use larger bursts.
+ */
+ if (tx) {
+ sync_dev = host->txdma;
+
+ /* src_prt, ccnt, and link to be set up later */
+ src_bidx = acnt;
+ src_cidx = acnt * bcnt;
+
+ dst_port = host->mem_res->start + DAVINCI_MMCDXR;
+ dst_bidx = 0;
+ dst_cidx = 0;
+ } else {
+ sync_dev = host->rxdma;
+
+ src_port = host->mem_res->start + DAVINCI_MMCDRR;
+ src_bidx = 0;
+ src_cidx = 0;
+
+ /* dst_prt, ccnt, and link to be set up later */
+ dst_bidx = acnt;
+ dst_cidx = acnt * bcnt;
+ }
+
+ /*
+ * We can't use FIFO mode for the FIFOs because MMC FIFO addresses
+ * are not 256-bit (32-byte) aligned. So we use INCR, and the W8BIT
+ * parameter is ignored.
+ */
+ edma_set_src(sync_dev, src_port, INCR, W8BIT);
+ edma_set_dest(sync_dev, dst_port, INCR, W8BIT);
+
+ edma_set_src_index(sync_dev, src_bidx, src_cidx);
+ edma_set_dest_index(sync_dev, dst_bidx, dst_cidx);
+
+ edma_set_transfer_params(sync_dev, acnt, bcnt, ccnt, 8, ABSYNC);
+
+ edma_read_slot(sync_dev, template);
+
+ /* don't bother with irqs or chaining */
+ template->opt |= sync_dev << 12;
+}
+
+static void mmc_davinci_send_dma_request(struct mmc_davinci_host *host,
+ struct mmc_data *data)
+{
+ struct edmacc_param *template;
+ int channel, slot;
+ unsigned link;
+ struct scatterlist *sg;
+ unsigned sg_len;
+ unsigned bytes_left = host->bytes_left;
+ const unsigned shift = ffs(rw_threshold) - 1;;
+
+ if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE) {
+ template = &host->tx_template;
+ channel = host->txdma;
+ } else {
+ template = &host->rx_template;
+ channel = host->rxdma;
+ }
+
+ /* We know sg_len and ccnt will never be out of range because
+ * we told the mmc layer which in turn tells the block layer
+ * to ensure that it only hands us one scatterlist segment
+ * per EDMA PARAM entry. Update the PARAM
+ * entries needed for each segment of this scatterlist.
+ */
+ for (slot = channel, link = 0, sg = data->sg, sg_len = host->sg_len;
+ sg_len-- != 0 && bytes_left;
+ sg = sg_next(sg), slot = host->links[link++]) {
+ u32 buf = sg_dma_address(sg);
+ unsigned count = sg_dma_len(sg);
+
+ template->link_bcntrld = sg_len
+ ? (host->links[link] << 5)
+ : 0xffff;
+
+ if (count > bytes_left)
+ count = bytes_left;
+ bytes_left -= count;
+
+ if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE)
+ template->src = buf;
+ else
+ template->dst = buf;
+ template->ccnt = count >> shift;
+
+ edma_write_slot(slot, template);
+ }
+
+ if (host->version == MMC_CTLR_VERSION_2)
+ edma_clear_event(channel);
+
+ edma_start(channel);
+}
+
+static int mmc_davinci_start_dma_transfer(struct mmc_davinci_host *host,
+ struct mmc_data *data)
+{
+ int i;
+ int mask = rw_threshold - 1;
+
+ host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ ((data->flags & MMC_DATA_WRITE)
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE));
+
+ /* no individual DMA segment should need a partial FIFO */
+ for (i = 0; i < host->sg_len; i++) {
+ if (sg_dma_len(data->sg + i) & mask) {
+ dma_unmap_sg(mmc_dev(host->mmc),
+ data->sg, data->sg_len,
+ (data->flags & MMC_DATA_WRITE)
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ return -1;
+ }
+ }
+
+ host->do_dma = 1;
+ mmc_davinci_send_dma_request(host, data);
+
+ return 0;
+}
+
+static void __init_or_module
+davinci_release_dma_channels(struct mmc_davinci_host *host)
+{
+ unsigned i;
+
+ if (!host->use_dma)
+ return;
+
+ for (i = 0; i < host->n_link; i++)
+ edma_free_slot(host->links[i]);
+
+ edma_free_channel(host->txdma);
+ edma_free_channel(host->rxdma);
+}
+
+static int __init davinci_acquire_dma_channels(struct mmc_davinci_host *host)
+{
+ int r, i;
+
+ /* Acquire master DMA write channel */
+ r = edma_alloc_channel(host->txdma, mmc_davinci_dma_cb, host,
+ EVENTQ_DEFAULT);
+ if (r < 0) {
+ dev_warn(mmc_dev(host->mmc), "alloc %s channel err %d\n",
+ "tx", r);
+ return r;
+ }
+ mmc_davinci_dma_setup(host, true, &host->tx_template);
+
+ /* Acquire master DMA read channel */
+ r = edma_alloc_channel(host->rxdma, mmc_davinci_dma_cb, host,
+ EVENTQ_DEFAULT);
+ if (r < 0) {
+ dev_warn(mmc_dev(host->mmc), "alloc %s channel err %d\n",
+ "rx", r);
+ goto free_master_write;
+ }
+ mmc_davinci_dma_setup(host, false, &host->rx_template);
+
+ /* Allocate parameter RAM slots, which will later be bound to a
+ * channel as needed to handle a scatterlist.
+ */
+ for (i = 0; i < ARRAY_SIZE(host->links); i++) {
+ r = edma_alloc_slot(EDMA_SLOT_ANY);
+ if (r < 0) {
+ dev_dbg(mmc_dev(host->mmc), "dma PaRAM alloc --> %d\n",
+ r);
+ break;
+ }
+ host->links[i] = r;
+ }
+ host->n_link = i;
+
+ return 0;
+
+free_master_write:
+ edma_free_channel(host->txdma);
+
+ return r;
+}
+
+/*----------------------------------------------------------------------*/
+
+static void
+mmc_davinci_prepare_data(struct mmc_davinci_host *host, struct mmc_request *req)
+{
+ int fifo_lev = (rw_threshold == 32) ? MMCFIFOCTL_FIFOLEV : 0;
+ int timeout;
+ struct mmc_data *data = req->data;
+
+ if (host->version == MMC_CTLR_VERSION_2)
+ fifo_lev = (rw_threshold == 64) ? MMCFIFOCTL_FIFOLEV : 0;
+
+ host->data = data;
+ if (data == NULL) {
+ host->data_dir = DAVINCI_MMC_DATADIR_NONE;
+ writel(0, host->base + DAVINCI_MMCBLEN);
+ writel(0, host->base + DAVINCI_MMCNBLK);
+ return;
+ }
+
+ dev_dbg(mmc_dev(host->mmc), "%s %s, %d blocks of %d bytes\n",
+ (data->flags & MMC_DATA_STREAM) ? "stream" : "block",
+ (data->flags & MMC_DATA_WRITE) ? "write" : "read",
+ data->blocks, data->blksz);
+ dev_dbg(mmc_dev(host->mmc), " DTO %d cycles + %d ns\n",
+ data->timeout_clks, data->timeout_ns);
+ timeout = data->timeout_clks +
+ (data->timeout_ns / host->ns_in_one_cycle);
+ if (timeout > 0xffff)
+ timeout = 0xffff;
+
+ writel(timeout, host->base + DAVINCI_MMCTOD);
+ writel(data->blocks, host->base + DAVINCI_MMCNBLK);
+ writel(data->blksz, host->base + DAVINCI_MMCBLEN);
+
+ /* Configure the FIFO */
+ switch (data->flags & MMC_DATA_WRITE) {
+ case MMC_DATA_WRITE:
+ host->data_dir = DAVINCI_MMC_DATADIR_WRITE;
+ writel(fifo_lev | MMCFIFOCTL_FIFODIR_WR | MMCFIFOCTL_FIFORST,
+ host->base + DAVINCI_MMCFIFOCTL);
+ writel(fifo_lev | MMCFIFOCTL_FIFODIR_WR,
+ host->base + DAVINCI_MMCFIFOCTL);
+ break;
+
+ default:
+ host->data_dir = DAVINCI_MMC_DATADIR_READ;
+ writel(fifo_lev | MMCFIFOCTL_FIFODIR_RD | MMCFIFOCTL_FIFORST,
+ host->base + DAVINCI_MMCFIFOCTL);
+ writel(fifo_lev | MMCFIFOCTL_FIFODIR_RD,
+ host->base + DAVINCI_MMCFIFOCTL);
+ break;
+ }
+
+ host->buffer = NULL;
+ host->bytes_left = data->blocks * data->blksz;
+
+ /* For now we try to use DMA whenever we won't need partial FIFO
+ * reads or writes, either for the whole transfer (as tested here)
+ * or for any individual scatterlist segment (tested when we call
+ * start_dma_transfer).
+ *
+ * While we *could* change that, unusual block sizes are rarely
+ * used. The occasional fallback to PIO should't hurt.
+ */
+ if (host->use_dma && (host->bytes_left & (rw_threshold - 1)) == 0
+ && mmc_davinci_start_dma_transfer(host, data) == 0) {
+ /* zero this to ensure we take no PIO paths */
+ host->bytes_left = 0;
+ } else {
+ /* Revert to CPU Copy */
+ host->sg_len = data->sg_len;
+ host->sg = host->data->sg;
+ mmc_davinci_sg_to_buf(host);
+ }
+}
+
+static void mmc_davinci_request(struct mmc_host *mmc, struct mmc_request *req)
+{
+ struct mmc_davinci_host *host = mmc_priv(mmc);
+ unsigned long timeout = jiffies + msecs_to_jiffies(900);
+ u32 mmcst1 = 0;
+
+ /* Card may still be sending BUSY after a previous operation,
+ * typically some kind of write. If so, we can't proceed yet.
+ */
+ while (time_before(jiffies, timeout)) {
+ mmcst1 = readl(host->base + DAVINCI_MMCST1);
+ if (!(mmcst1 & MMCST1_BUSY))
+ break;
+ cpu_relax();
+ }
+ if (mmcst1 & MMCST1_BUSY) {
+ dev_err(mmc_dev(host->mmc), "still BUSY? bad ... \n");
+ req->cmd->error = -ETIMEDOUT;
+ mmc_request_done(mmc, req);
+ return;
+ }
+
+ host->do_dma = 0;
+ mmc_davinci_prepare_data(host, req);
+ mmc_davinci_start_command(host, req->cmd);
+}
+
+static unsigned int calculate_freq_for_card(struct mmc_davinci_host *host,
+ unsigned int mmc_req_freq)
+{
+ unsigned int mmc_freq = 0, mmc_pclk = 0, mmc_push_pull_divisor = 0;
+
+ mmc_pclk = host->mmc_input_clk;
+ if (mmc_req_freq && mmc_pclk > (2 * mmc_req_freq))
+ mmc_push_pull_divisor = ((unsigned int)mmc_pclk
+ / (2 * mmc_req_freq)) - 1;
+ else
+ mmc_push_pull_divisor = 0;
+
+ mmc_freq = (unsigned int)mmc_pclk
+ / (2 * (mmc_push_pull_divisor + 1));
+
+ if (mmc_freq > mmc_req_freq)
+ mmc_push_pull_divisor = mmc_push_pull_divisor + 1;
+ /* Convert ns to clock cycles */
+ if (mmc_req_freq <= 400000)
+ host->ns_in_one_cycle = (1000000) / (((mmc_pclk
+ / (2 * (mmc_push_pull_divisor + 1)))/1000));
+ else
+ host->ns_in_one_cycle = (1000000) / (((mmc_pclk
+ / (2 * (mmc_push_pull_divisor + 1)))/1000000));
+
+ return mmc_push_pull_divisor;
+}
+
+static void mmc_davinci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ unsigned int open_drain_freq = 0, mmc_pclk = 0;
+ unsigned int mmc_push_pull_freq = 0;
+ struct mmc_davinci_host *host = mmc_priv(mmc);
+
+ mmc_pclk = host->mmc_input_clk;
+ dev_dbg(mmc_dev(host->mmc),
+ "clock %dHz busmode %d powermode %d Vdd %04x\n",
+ ios->clock, ios->bus_mode, ios->power_mode,
+ ios->vdd);
+ if (ios->bus_width == MMC_BUS_WIDTH_4) {
+ dev_dbg(mmc_dev(host->mmc), "Enabling 4 bit mode\n");
+ writel(readl(host->base + DAVINCI_MMCCTL) | MMCCTL_WIDTH_4_BIT,
+ host->base + DAVINCI_MMCCTL);
+ } else {
+ dev_dbg(mmc_dev(host->mmc), "Disabling 4 bit mode\n");
+ writel(readl(host->base + DAVINCI_MMCCTL) & ~MMCCTL_WIDTH_4_BIT,
+ host->base + DAVINCI_MMCCTL);
+ }
+
+ if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
+ u32 temp;
+
+ /* Ignoring the init clock value passed for fixing the inter
+ * operability with different cards.
+ */
+ open_drain_freq = ((unsigned int)mmc_pclk
+ / (2 * MMCSD_INIT_CLOCK)) - 1;
+
+ if (open_drain_freq > 0xFF)
+ open_drain_freq = 0xFF;
+
+ temp = readl(host->base + DAVINCI_MMCCLK) & ~MMCCLK_CLKRT_MASK;
+ temp |= open_drain_freq;
+ writel(temp, host->base + DAVINCI_MMCCLK);
+
+ /* Convert ns to clock cycles */
+ host->ns_in_one_cycle = (1000000) / (MMCSD_INIT_CLOCK/1000);
+ } else {
+ u32 temp;
+ mmc_push_pull_freq = calculate_freq_for_card(host, ios->clock);
+
+ if (mmc_push_pull_freq > 0xFF)
+ mmc_push_pull_freq = 0xFF;
+
+ temp = readl(host->base + DAVINCI_MMCCLK) & ~MMCCLK_CLKEN;
+ writel(temp, host->base + DAVINCI_MMCCLK);
+
+ udelay(10);
+
+ temp = readl(host->base + DAVINCI_MMCCLK) & ~MMCCLK_CLKRT_MASK;
+ temp |= mmc_push_pull_freq;
+ writel(temp, host->base + DAVINCI_MMCCLK);
+
+ writel(temp | MMCCLK_CLKEN, host->base + DAVINCI_MMCCLK);
+
+ udelay(10);
+ }
+
+ host->bus_mode = ios->bus_mode;
+ if (ios->power_mode == MMC_POWER_UP) {
+ unsigned long timeout = jiffies + msecs_to_jiffies(50);
+ bool lose = true;
+
+ /* Send clock cycles, poll completion */
+ writel(0, host->base + DAVINCI_MMCARGHL);
+ writel(MMCCMD_INITCK, host->base + DAVINCI_MMCCMD);
+ while (time_before(jiffies, timeout)) {
+ u32 tmp = readl(host->base + DAVINCI_MMCST0);
+
+ if (tmp & MMCST0_RSPDNE) {
+ lose = false;
+ break;
+ }
+ cpu_relax();
+ }
+ if (lose)
+ dev_warn(mmc_dev(host->mmc), "powerup timeout\n");
+ }
+
+ /* FIXME on power OFF, reset things ... */
+}
+
+static void
+mmc_davinci_xfer_done(struct mmc_davinci_host *host, struct mmc_data *data)
+{
+ host->data = NULL;
+ host->data_dir = DAVINCI_MMC_DATADIR_NONE;
+
+ if (host->do_dma) {
+ davinci_abort_dma(host);
+
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ (data->flags & MMC_DATA_WRITE)
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ host->do_dma = false;
+ }
+
+ if (!data->stop || (host->cmd && host->cmd->error)) {
+ mmc_request_done(host->mmc, data->mrq);
+ writel(0, host->base + DAVINCI_MMCIM);
+ } else
+ mmc_davinci_start_command(host, data->stop);
+}
+
+static void mmc_davinci_cmd_done(struct mmc_davinci_host *host,
+ struct mmc_command *cmd)
+{
+ host->cmd = NULL;
+
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ if (cmd->flags & MMC_RSP_136) {
+ /* response type 2 */
+ cmd->resp[3] = readl(host->base + DAVINCI_MMCRSP01);
+ cmd->resp[2] = readl(host->base + DAVINCI_MMCRSP23);
+ cmd->resp[1] = readl(host->base + DAVINCI_MMCRSP45);
+ cmd->resp[0] = readl(host->base + DAVINCI_MMCRSP67);
+ } else {
+ /* response types 1, 1b, 3, 4, 5, 6 */
+ cmd->resp[0] = readl(host->base + DAVINCI_MMCRSP67);
+ }
+ }
+
+ if (host->data == NULL || cmd->error) {
+ if (cmd->error == -ETIMEDOUT)
+ cmd->mrq->cmd->retries = 0;
+ mmc_request_done(host->mmc, cmd->mrq);
+ writel(0, host->base + DAVINCI_MMCIM);
+ }
+}
+
+static void
+davinci_abort_data(struct mmc_davinci_host *host, struct mmc_data *data)
+{
+ u32 temp;
+
+ /* reset command and data state machines */
+ temp = readl(host->base + DAVINCI_MMCCTL);
+ writel(temp | MMCCTL_CMDRST | MMCCTL_DATRST,
+ host->base + DAVINCI_MMCCTL);
+
+ temp &= ~(MMCCTL_CMDRST | MMCCTL_DATRST);
+ udelay(10);
+ writel(temp, host->base + DAVINCI_MMCCTL);
+}
+
+static irqreturn_t mmc_davinci_irq(int irq, void *dev_id)
+{
+ struct mmc_davinci_host *host = (struct mmc_davinci_host *)dev_id;
+ unsigned int status, qstatus;
+ int end_command = 0;
+ int end_transfer = 0;
+ struct mmc_data *data = host->data;
+
+ if (host->cmd == NULL && host->data == NULL) {
+ status = readl(host->base + DAVINCI_MMCST0);
+ dev_dbg(mmc_dev(host->mmc),
+ "Spurious interrupt 0x%04x\n", status);
+ /* Disable the interrupt from mmcsd */
+ writel(0, host->base + DAVINCI_MMCIM);
+ return IRQ_NONE;
+ }
+
+ status = readl(host->base + DAVINCI_MMCST0);
+ qstatus = status;
+
+ /* handle FIFO first when using PIO for data.
+ * bytes_left will decrease to zero as I/O progress and status will
+ * read zero over iteration because this controller status
+ * register(MMCST0) reports any status only once and it is cleared
+ * by read. So, it is not unbouned loop even in the case of
+ * non-dma.
+ */
+ while (host->bytes_left && (status & (MMCST0_DXRDY | MMCST0_DRRDY))) {
+ davinci_fifo_data_trans(host, rw_threshold);
+ status = readl(host->base + DAVINCI_MMCST0);
+ if (!status)
+ break;
+ qstatus |= status;
+ }
+
+ if (qstatus & MMCST0_DATDNE) {
+ /* All blocks sent/received, and CRC checks passed */
+ if (data != NULL) {
+ if ((host->do_dma == 0) && (host->bytes_left > 0)) {
+ /* if datasize < rw_threshold
+ * no RX ints are generated
+ */
+ davinci_fifo_data_trans(host, host->bytes_left);
+ }
+ end_transfer = 1;
+ data->bytes_xfered = data->blocks * data->blksz;
+ } else {
+ dev_err(mmc_dev(host->mmc),
+ "DATDNE with no host->data\n");
+ }
+ }
+
+ if (qstatus & MMCST0_TOUTRD) {
+ /* Read data timeout */
+ data->error = -ETIMEDOUT;
+ end_transfer = 1;
+
+ dev_dbg(mmc_dev(host->mmc),
+ "read data timeout, status %x\n",
+ qstatus);
+
+ davinci_abort_data(host, data);
+ }
+
+ if (qstatus & (MMCST0_CRCWR | MMCST0_CRCRD)) {
+ /* Data CRC error */
+ data->error = -EILSEQ;
+ end_transfer = 1;
+
+ /* NOTE: this controller uses CRCWR to report both CRC
+ * errors and timeouts (on writes). MMCDRSP values are
+ * only weakly documented, but 0x9f was clearly a timeout
+ * case and the two three-bit patterns in various SD specs
+ * (101, 010) aren't part of it ...
+ */
+ if (qstatus & MMCST0_CRCWR) {
+ u32 temp = readb(host->base + DAVINCI_MMCDRSP);
+
+ if (temp == 0x9f)
+ data->error = -ETIMEDOUT;
+ }
+ dev_dbg(mmc_dev(host->mmc), "data %s %s error\n",
+ (qstatus & MMCST0_CRCWR) ? "write" : "read",
+ (data->error == -ETIMEDOUT) ? "timeout" : "CRC");
+
+ davinci_abort_data(host, data);
+ }
+
+ if (qstatus & MMCST0_TOUTRS) {
+ /* Command timeout */
+ if (host->cmd) {
+ dev_dbg(mmc_dev(host->mmc),
+ "CMD%d timeout, status %x\n",
+ host->cmd->opcode, qstatus);
+ host->cmd->error = -ETIMEDOUT;
+ if (data) {
+ end_transfer = 1;
+ davinci_abort_data(host, data);
+ } else
+ end_command = 1;
+ }
+ }
+
+ if (qstatus & MMCST0_CRCRS) {
+ /* Command CRC error */
+ dev_dbg(mmc_dev(host->mmc), "Command CRC error\n");
+ if (host->cmd) {
+ host->cmd->error = -EILSEQ;
+ end_command = 1;
+ }
+ }
+
+ if (qstatus & MMCST0_RSPDNE) {
+ /* End of command phase */
+ end_command = (int) host->cmd;
+ }
+
+ if (end_command)
+ mmc_davinci_cmd_done(host, host->cmd);
+ if (end_transfer)
+ mmc_davinci_xfer_done(host, data);
+ return IRQ_HANDLED;
+}
+
+static int mmc_davinci_get_cd(struct mmc_host *mmc)
+{
+ struct platform_device *pdev = to_platform_device(mmc->parent);
+ struct davinci_mmc_config *config = pdev->dev.platform_data;
+
+ if (!config || !config->get_cd)
+ return -ENOSYS;
+ return config->get_cd(pdev->id);
+}
+
+static int mmc_davinci_get_ro(struct mmc_host *mmc)
+{
+ struct platform_device *pdev = to_platform_device(mmc->parent);
+ struct davinci_mmc_config *config = pdev->dev.platform_data;
+
+ if (!config || !config->get_ro)
+ return -ENOSYS;
+ return config->get_ro(pdev->id);
+}
+
+static struct mmc_host_ops mmc_davinci_ops = {
+ .request = mmc_davinci_request,
+ .set_ios = mmc_davinci_set_ios,
+ .get_cd = mmc_davinci_get_cd,
+ .get_ro = mmc_davinci_get_ro,
+};
+
+/*----------------------------------------------------------------------*/
+
+static void __init init_mmcsd_host(struct mmc_davinci_host *host)
+{
+ /* DAT line portion is diabled and in reset state */
+ writel(readl(host->base + DAVINCI_MMCCTL) | MMCCTL_DATRST,
+ host->base + DAVINCI_MMCCTL);
+
+ /* CMD line portion is diabled and in reset state */
+ writel(readl(host->base + DAVINCI_MMCCTL) | MMCCTL_CMDRST,
+ host->base + DAVINCI_MMCCTL);
+
+ udelay(10);
+
+ writel(0, host->base + DAVINCI_MMCCLK);
+ writel(MMCCLK_CLKEN, host->base + DAVINCI_MMCCLK);
+
+ writel(0x1FFF, host->base + DAVINCI_MMCTOR);
+ writel(0xFFFF, host->base + DAVINCI_MMCTOD);
+
+ writel(readl(host->base + DAVINCI_MMCCTL) & ~MMCCTL_DATRST,
+ host->base + DAVINCI_MMCCTL);
+ writel(readl(host->base + DAVINCI_MMCCTL) & ~MMCCTL_CMDRST,
+ host->base + DAVINCI_MMCCTL);
+
+ udelay(10);
+}
+
+static int __init davinci_mmcsd_probe(struct platform_device *pdev)
+{
+ struct davinci_mmc_config *pdata = pdev->dev.platform_data;
+ struct mmc_davinci_host *host = NULL;
+ struct mmc_host *mmc = NULL;
+ struct resource *r, *mem = NULL;
+ int ret = 0, irq = 0;
+ size_t mem_size;
+
+ /* REVISIT: when we're fully converted, fail if pdata is NULL */
+
+ ret = -ENODEV;
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(pdev, 0);
+ if (!r || irq == NO_IRQ)
+ goto out;
+
+ ret = -EBUSY;
+ mem_size = resource_size(r);
+ mem = request_mem_region(r->start, mem_size, pdev->name);
+ if (!mem)
+ goto out;
+
+ ret = -ENOMEM;
+ mmc = mmc_alloc_host(sizeof(struct mmc_davinci_host), &pdev->dev);
+ if (!mmc)
+ goto out;
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc; /* Important */
+
+ r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (!r)
+ goto out;
+ host->rxdma = r->start;
+
+ r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (!r)
+ goto out;
+ host->txdma = r->start;
+
+ host->mem_res = mem;
+ host->base = ioremap(mem->start, mem_size);
+ if (!host->base)
+ goto out;
+
+ ret = -ENXIO;
+ host->clk = clk_get(&pdev->dev, "MMCSDCLK");
+ if (IS_ERR(host->clk)) {
+ ret = PTR_ERR(host->clk);
+ goto out;
+ }
+ clk_enable(host->clk);
+ host->mmc_input_clk = clk_get_rate(host->clk);
+
+ init_mmcsd_host(host);
+
+ host->use_dma = use_dma;
+ host->irq = irq;
+
+ if (host->use_dma && davinci_acquire_dma_channels(host) != 0)
+ host->use_dma = 0;
+
+ /* REVISIT: someday, support IRQ-driven card detection. */
+ mmc->caps |= MMC_CAP_NEEDS_POLL;
+
+ if (!pdata || pdata->wires == 4 || pdata->wires == 0)
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
+
+ host->version = pdata->version;
+
+ mmc->ops = &mmc_davinci_ops;
+ mmc->f_min = 312500;
+ mmc->f_max = 25000000;
+ if (pdata && pdata->max_freq)
+ mmc->f_max = pdata->max_freq;
+ if (pdata && pdata->caps)
+ mmc->caps |= pdata->caps;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+ /* With no iommu coalescing pages, each phys_seg is a hw_seg.
+ * Each hw_seg uses one EDMA parameter RAM slot, always one
+ * channel and then usually some linked slots.
+ */
+ mmc->max_hw_segs = 1 + host->n_link;
+ mmc->max_phys_segs = mmc->max_hw_segs;
+
+ /* EDMA limit per hw segment (one or two MBytes) */
+ mmc->max_seg_size = MAX_CCNT * rw_threshold;
+
+ /* MMC/SD controller limits for multiblock requests */
+ mmc->max_blk_size = 4095; /* BLEN is 12 bits */
+ mmc->max_blk_count = 65535; /* NBLK is 16 bits */
+ mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+
+ dev_dbg(mmc_dev(host->mmc), "max_phys_segs=%d\n", mmc->max_phys_segs);
+ dev_dbg(mmc_dev(host->mmc), "max_hw_segs=%d\n", mmc->max_hw_segs);
+ dev_dbg(mmc_dev(host->mmc), "max_blk_size=%d\n", mmc->max_blk_size);
+ dev_dbg(mmc_dev(host->mmc), "max_req_size=%d\n", mmc->max_req_size);
+ dev_dbg(mmc_dev(host->mmc), "max_seg_size=%d\n", mmc->max_seg_size);
+
+ platform_set_drvdata(pdev, host);
+
+ ret = mmc_add_host(mmc);
+ if (ret < 0)
+ goto out;
+
+ ret = request_irq(irq, mmc_davinci_irq, 0, mmc_hostname(mmc), host);
+ if (ret)
+ goto out;
+
+ rename_region(mem, mmc_hostname(mmc));
+
+ dev_info(mmc_dev(host->mmc), "Using %s, %d-bit mode\n",
+ host->use_dma ? "DMA" : "PIO",
+ (mmc->caps & MMC_CAP_4_BIT_DATA) ? 4 : 1);
+
+ return 0;
+
+out:
+ if (host) {
+ davinci_release_dma_channels(host);
+
+ if (host->clk) {
+ clk_disable(host->clk);
+ clk_put(host->clk);
+ }
+
+ if (host->base)
+ iounmap(host->base);
+ }
+
+ if (mmc)
+ mmc_free_host(mmc);
+
+ if (mem)
+ release_resource(mem);
+
+ dev_dbg(&pdev->dev, "probe err %d\n", ret);
+
+ return ret;
+}
+
+static int __exit davinci_mmcsd_remove(struct platform_device *pdev)
+{
+ struct mmc_davinci_host *host = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+ if (host) {
+ mmc_remove_host(host->mmc);
+ free_irq(host->irq, host);
+
+ davinci_release_dma_channels(host);
+
+ clk_disable(host->clk);
+ clk_put(host->clk);
+
+ iounmap(host->base);
+
+ release_resource(host->mem_res);
+
+ mmc_free_host(host->mmc);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int davinci_mmcsd_suspend(struct platform_device *pdev, pm_message_t msg)
+{
+ struct mmc_davinci_host *host = platform_get_drvdata(pdev);
+
+ return mmc_suspend_host(host->mmc, msg);
+}
+
+static int davinci_mmcsd_resume(struct platform_device *pdev)
+{
+ struct mmc_davinci_host *host = platform_get_drvdata(pdev);
+
+ return mmc_resume_host(host->mmc);
+}
+#else
+#define davinci_mmcsd_suspend NULL
+#define davinci_mmcsd_resume NULL
+#endif
+
+static struct platform_driver davinci_mmcsd_driver = {
+ .driver = {
+ .name = "davinci_mmc",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(davinci_mmcsd_remove),
+ .suspend = davinci_mmcsd_suspend,
+ .resume = davinci_mmcsd_resume,
+};
+
+static int __init davinci_mmcsd_init(void)
+{
+ return platform_driver_probe(&davinci_mmcsd_driver,
+ davinci_mmcsd_probe);
+}
+module_init(davinci_mmcsd_init);
+
+static void __exit davinci_mmcsd_exit(void)
+{
+ platform_driver_unregister(&davinci_mmcsd_driver);
+}
+module_exit(davinci_mmcsd_exit);
+
+MODULE_AUTHOR("Texas Instruments India");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MMC/SD driver for Davinci MMC controller");
+
--
1.5.6


\
 
 \ /
  Last update: 2009-06-23 14:33    [W:0.077 / U:26.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site