lkml.org 
[lkml]   [2009]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 18/25] Blackfin: stick the CPU name into boot image name
Date
From: Robin Getz <rgetz@blackfin.uclinux.org>

Rather than use "Linux" in the boot image name (as this is redundant --
the image type is already set to "linux"), use the CPU name. This makes
it fairly obvious when a wrong image is accidentally booted. Otherwise
there is no kernel output and you waste time scratching your head
wondering wtf just happened.

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
arch/blackfin/boot/Makefile | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile
index 3ab6f23..fd9ccc5 100644
--- a/arch/blackfin/boot/Makefile
+++ b/arch/blackfin/boot/Makefile
@@ -13,7 +13,7 @@ extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma

quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \
- -C $(2) -n 'Linux-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
+ -C $(2) -n '$(MACHINE)-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
-e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \
-d $< $@

--
1.6.3.1


\
 
 \ /
  Last update: 2009-06-20 21:03    [W:0.071 / U:35.792 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site