lkml.org 
[lkml]   [2009]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: linux-next: Tree for June 17 (pci/slot)
* Alex Chiang <achiang@hp.com>:
> diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
> index ba6af16..0be4efd 100644
> --- a/drivers/pci/Makefile
> +++ b/drivers/pci/Makefile
> @@ -2,10 +2,11 @@
> # Makefile for the PCI bus specific drivers.
> #
>
> -obj-y += access.o bus.o probe.o remove.o pci.o quirks.o slot.o \
> - pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
> +obj-y += access.o bus.o probe.o remove.o pci.o quirks.o \
> + pci-driver.o search.o rom.o setup-res.o \
> irq.o
> obj-$(CONFIG_PROC_FS) += proc.o
> +obj-$(CONFIG_SYSFS) += slot.o pci-sysfs.o

Sigh, this won't work because the PCI core blithely assumes we have
sysfs:

drivers/built-in.o: In function `pci_bus_add_device':
/kio/work/achiang/kernels/linux-2.6/drivers/pci/bus.c:89: undefined reference to `pci_create_sysfs_dev_files'
drivers/built-in.o: In function `pci_stop_dev':
/kio/work/achiang/kernels/linux-2.6/drivers/pci/remove.c:24: undefined reference to `pci_remove_sysfs_dev_files'

So, here is v3 that actually does build with !CONFIG_SYSFS. It
touches a bit more now, but I believe it is still appropriate
because neither pci_slot.ko nor any of the drivers in
drivers/pci/hotplug/ are useful without sysfs.

From: Alex Chiang <achiang@hp.com>

PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS

There is no way to interact with a physical PCI slot without
sysfs, so encode the dependency and prevent this build error:

drivers/pci/slot.c: In function 'pci_hp_create_module_link':
drivers/pci/slot.c:327: error: 'module_kset' undeclared

This patch _should_ make pci-sysfs.o depend on CONFIG_SYSFS too,
but we cannot (yet) because the PCI core merrily assumes the
existence of sysfs:

drivers/built-in.o: In function `pci_bus_add_device':
drivers/pci/bus.c:89: undefined reference to `pci_create_sysfs_dev_files'
drivers/built-in.o: In function `pci_stop_dev':
drivers/pci/remove.c:24: undefined reference to `pci_remove_sysfs_dev_files'

So do the minimal bit for now and figure out how to untangle it
later.

Cc: Len Brown <lenb@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fix-suggested-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Alex Chiang <achiang@hp.com>
---
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 431f8b4..7ec7d88 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -266,6 +266,7 @@ config ACPI_DEBUG_FUNC_TRACE

config ACPI_PCI_SLOT
tristate "PCI slot detection driver"
+ depends on SYSFS
default n
help
This driver creates entries in /sys/bus/pci/slots/ for all PCI
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index ba6af16..ed32f67 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -2,10 +2,11 @@
# Makefile for the PCI bus specific drivers.
#

-obj-y += access.o bus.o probe.o remove.o pci.o quirks.o slot.o \
+obj-y += access.o bus.o probe.o remove.o pci.o quirks.o \
pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
irq.o
obj-$(CONFIG_PROC_FS) += proc.o
+obj-$(CONFIG_SYSFS) += slot.o

# Build PCI Express stuff if needed
obj-$(CONFIG_PCIEPORTBUS) += pcie/
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index 9aa4fe1..522c360 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -4,7 +4,7 @@

menuconfig HOTPLUG_PCI
tristate "Support for PCI Hotplug"
- depends on PCI && HOTPLUG
+ depends on PCI && HOTPLUG && SYSFS
---help---
Say Y here if you have a motherboard with a PCI Hotplug controller.
This allows you to add and remove PCI cards while the machine is

\
 
 \ /
  Last update: 2009-06-18 03:07    [W:3.254 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site