lkml.org 
[lkml]   [2009]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[RESEND][PATCH] video: Initial support for ADV7180
This is an initial driver for Analog Devices ADV7180 Video Decoder.

So far it only supports query standard.

Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com>
---
Index: linux-2.6.30-rc7/drivers/media/video/adv7180.c
===================================================================
--- linux-2.6.30-rc7/drivers/media/video/adv7180.c (revision 0)
+++ linux-2.6.30-rc7/drivers/media/video/adv7180.c (revision 867)
@@ -0,0 +1,221 @@
+/*
+ * adv7180.c Analog Devices ADV7180 video decoder driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <media/v4l2-ioctl.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-i2c-drv.h>
+
+
+#define ADV7180_INPUT_CONTROL_REG 0x00
+#define ADV7180_INPUT_CONTROL_PAL_BG_NTSC_J_SECAM 0x00
+#define ADV7180_AUTODETECT_ENABLE_REG 0x07
+#define ADV7180_AUTODETECT_DEFAULT 0x7f
+
+
+#define ADV7180_STATUS1_REG 0x10
+#define ADV7180_STATUS1_AUTOD_MASK 0x70
+#define ADV7180_STATUS1_AUTOD_NTSM_M_J 0x00
+#define ADV7180_STATUS1_AUTOD_NTSC_4_43 0x10
+#define ADV7180_STATUS1_AUTOD_PAL_M 0x20
+#define ADV7180_STATUS1_AUTOD_PAL_60 0x30
+#define ADV7180_STATUS1_AUTOD_PAL_B_G 0x40
+#define ADV7180_STATUS1_AUTOD_SECAM 0x50
+#define ADV7180_STATUS1_AUTOD_PAL_COMB 0x60
+#define ADV7180_STATUS1_AUTOD_SECAM_525 0x70
+
+#define ADV7180_IDENT_REG 0x11
+#define ADV7180_ID_7180 0x18
+
+
+static unsigned short normal_i2c[] = { 0x42 >> 1, I2C_CLIENT_END };
+
+I2C_CLIENT_INSMOD;
+
+struct adv7180_state {
+ struct v4l2_subdev sd;
+};
+
+static v4l2_std_id determine_norm(struct i2c_client *client)
+{
+ u8 status1 = i2c_smbus_read_byte_data(client, ADV7180_STATUS1_REG);
+
+ switch (status1 & ADV7180_STATUS1_AUTOD_MASK) {
+ case ADV7180_STATUS1_AUTOD_NTSM_M_J:
+ return V4L2_STD_NTSC_M_JP;
+ case ADV7180_STATUS1_AUTOD_NTSC_4_43:
+ return V4L2_STD_NTSC_443;
+ case ADV7180_STATUS1_AUTOD_PAL_M:
+ return V4L2_STD_PAL_M;
+ case ADV7180_STATUS1_AUTOD_PAL_60:
+ return V4L2_STD_PAL_60;
+ case ADV7180_STATUS1_AUTOD_PAL_B_G:
+ return V4L2_STD_PAL;
+ case ADV7180_STATUS1_AUTOD_SECAM:
+ return V4L2_STD_SECAM;
+ case ADV7180_STATUS1_AUTOD_PAL_COMB:
+ return V4L2_STD_PAL_Nc | V4L2_STD_PAL_N;
+ case ADV7180_STATUS1_AUTOD_SECAM_525:
+ return V4L2_STD_SECAM;
+ default:
+ return V4L2_STD_UNKNOWN;
+ }
+}
+
+static inline struct adv7180_state *to_state(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct adv7180_state, sd);
+}
+
+static int adv7180_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ *(v4l2_std_id *)std = determine_norm(client);
+ return 0;
+}
+
+static int adv7180_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ return -EINVAL;
+}
+
+static int adv7180_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ return -EINVAL;
+}
+
+static int adv7180_g_chip_ident(struct v4l2_subdev *sd,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7180, 0);
+}
+
+static int adv7180_log_status(struct v4l2_subdev *sd)
+{
+ v4l2_info(sd, "Normal operation\n");
+ return 0;
+}
+
+static irqreturn_t adv7180_irq(int irq, void *devid)
+{
+ return IRQ_NONE;
+}
+
+static const struct v4l2_subdev_video_ops adv7180_video_ops = {
+ .querystd = adv7180_querystd,
+};
+
+static const struct v4l2_subdev_core_ops adv7180_core_ops = {
+ .log_status = adv7180_log_status,
+ .g_chip_ident = adv7180_g_chip_ident,
+ .g_ctrl = adv7180_g_ctrl,
+ .s_ctrl = adv7180_s_ctrl,
+};
+
+static const struct v4l2_subdev_ops adv7180_ops = {
+ .core = &adv7180_core_ops,
+ .video = &adv7180_video_ops,
+};
+
+/*
+ * Generic i2c probe
+ * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
+ */
+
+static int adv7180_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct adv7180_state *state;
+ struct v4l2_subdev *sd;
+
+ /* Check if the adapter supports the needed features */
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -EIO;
+
+ v4l_info(client, "chip found @ 0x%02x (%s)\n",
+ client->addr << 1, client->adapter->name);
+
+ state = kmalloc(sizeof(struct adv7180_state), GFP_KERNEL);
+ if (state == NULL)
+ return -ENOMEM;
+ sd = &state->sd;
+ v4l2_i2c_subdev_init(sd, client, &adv7180_ops);
+
+ /* Initialize adv7180 */
+
+ /* register interrupt, can be used later */
+ if (client->irq > 0) {
+ /* we can use IRQ */
+ int err = request_irq(client->irq, adv7180_irq, IRQF_SHARED,
+ "adv7180", sd);
+ if (err) {
+ printk(KERN_ERR "adv7180: Failed to request IRQ\n");
+ v4l2_device_unregister_subdev(sd);
+ kfree(state);
+ return err;
+ }
+ }
+
+ /* enable autodetection */
+ i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
+ ADV7180_INPUT_CONTROL_PAL_BG_NTSC_J_SECAM);
+ i2c_smbus_write_byte_data(client, ADV7180_AUTODETECT_ENABLE_REG,
+ ADV7180_AUTODETECT_DEFAULT);
+ return 0;
+}
+
+static int adv7180_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+ if (client->irq > 0)
+ free_irq(client->irq, sd);
+
+ v4l2_device_unregister_subdev(sd);
+ kfree(to_state(sd));
+ return 0;
+}
+
+static const struct i2c_device_id adv7180_id[] = {
+ { "adv7180", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adv7180_id);
+
+static struct v4l2_i2c_driver_data v4l2_i2c_data = {
+ .name = "adv7180",
+ .probe = adv7180_probe,
+ .remove = adv7180_remove,
+ .id_table = adv7180_id,
+};
+
+MODULE_DESCRIPTION("Analog Devices ADV7180 video decoder driver");
+MODULE_AUTHOR("Mocean Laboratories");
+MODULE_LICENSE("GPL v2");
+
Index: linux-2.6.30-rc7/drivers/media/video/Kconfig
===================================================================
--- linux-2.6.30-rc7/drivers/media/video/Kconfig (revision 861)
+++ linux-2.6.30-rc7/drivers/media/video/Kconfig (working copy)
@@ -265,6 +265,15 @@

comment "Video decoders"

+config VIDEO_ADV7180
+ tristate "Analog Devices ADV7180 decoder"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ Support for the Analog Devices ADV7180 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7180.
+
config VIDEO_BT819
tristate "BT819A VideoStream decoder"
depends on VIDEO_V4L2 && I2C
Index: linux-2.6.30-rc7/drivers/media/video/Makefile
===================================================================
--- linux-2.6.30-rc7/drivers/media/video/Makefile (revision 861)
+++ linux-2.6.30-rc7/drivers/media/video/Makefile (working copy)
@@ -49,6 +49,7 @@
obj-$(CONFIG_VIDEO_SAA7191) += saa7191.o
obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o
obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o
+obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o
obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o
obj-$(CONFIG_VIDEO_BT819) += bt819.o
obj-$(CONFIG_VIDEO_BT856) += bt856.o
Index: linux-2.6.30-rc7/include/media/v4l2-chip-ident.h
===================================================================
--- linux-2.6.30-rc7/include/media/v4l2-chip-ident.h (revision 861)
+++ linux-2.6.30-rc7/include/media/v4l2-chip-ident.h (working copy)
@@ -131,6 +131,9 @@
/* module adv7175: just ident 7175 */
V4L2_IDENT_ADV7175 = 7175,

+ /* module adv7180: just ident 7180 */
+ V4L2_IDENT_ADV7180 = 7180,
+
/* module saa7185: just ident 7185 */
V4L2_IDENT_SAA7185 = 7185,

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2009-06-15 17:17    [W:0.038 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site