lkml.org 
[lkml]   [2009]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 03/14] Pramfs: Documentation
From: Marco Stornelli <marco.stornelli@gmail.com>

Documentation.

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
---

diff -uprN linux-2.6.30-orig/Documentation/filesystems/pramfs.txt linux-2.6.30/Documentation/filesystems/pramfs.txt
--- linux-2.6.30-orig/Documentation/filesystems/pramfs.txt 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/Documentation/filesystems/pramfs.txt 2009-06-13 12:57:32.000000000 +0200
@@ -0,0 +1,227 @@
+
+PRAMFS Overview
+===============
+
+Many embedded systems have a block of non-volatile RAM separate from
+normal system memory, i.e. of which the kernel maintains no memory page
+descriptors. For such systems it would be beneficial to mount a
+fast read/write filesystem over this "I/O memory", for storing frequently
+accessed data that must survive system reboots and power cycles. An
+example usage might be system logs under /var/log, or a user address
+book in a cell phone or PDA.
+
+Linux traditionally had no support for a persistent, non-volatile RAM-based
+filesystem, persistent meaning the filesystem survives a system reboot
+or power cycle intact. The RAM-based filesystems such as tmpfs and ramfs
+have no actual backing store but exist entirely in the page and buffer
+caches, hence the filesystem disappears after a system reboot or
+power cycle.
+
+A relatively straight-forward solution is to write a simple block driver
+for the non-volatile RAM, and mount over it any disk-based filesystem such
+as ext2/ext3, reiserfs, etc.
+
+But the disk-based fs over non-volatile RAM block driver approach has
+some drawbacks:
+
+1. Disk-based filesystems such as ext2/ext3 were designed for optimum
+ performance on spinning disk media, so they implement features such
+ as block groups, which attempts to group inode data into a contiguous
+ set of data blocks to minimize disk seeking when accessing files. For
+ RAM there is no such concern; a file's data blocks can be scattered
+ throughout the media with no access speed penalty at all. So block
+ groups in a filesystem mounted over RAM just adds unnecessary
+ complexity. A better approach is to use a filesystem specifically
+ tailored to RAM media which does away with these disk-based features.
+ This increases the efficient use of space on the media, i.e. more
+ space is dedicated to actual file data storage and less to meta-data
+ needed to maintain that file data.
+
+2. If the backing-store RAM is comparable in access speed to system memory,
+ there's really no point in caching the file I/O data in the page
+ cache. Better to move file data directly between the user buffers
+ and the backing store RAM, i.e. use direct I/O. This prevents the
+ unnecessary populating of the page cache with dirty pages. However
+ direct I/O has to be enabled at every file open. To enable direct
+ I/O at all times for all regular files requires either that
+ applications be modified to include the O_DIRECT flag on all file
+ opens, or that a new filesystem be used that always performs direct
+ I/O by default.
+
+The Persistent/Protected RAM Special Filesystem (PRAMFS) is a
+full-featured read/write filesystem that has been designed to address
+these issues. PRAMFS is targeted to fast I/O memory, and if the memory
+is non-volatile, the filesystem will be persistent.
+
+In PRAMFS, direct I/O is enabled across all files in the filesystem, in
+other words the O_DIRECT flag is forced on every open of a PRAMFS file.
+Also, file I/O in the PRAMFS is always synchronous. There is no need
+to block the current process while the transfer to/from the PRAMFS
+is in progress, since one of the requirements of the PRAMFS is that the
+filesystem exist in fast RAM. So file I/O in PRAMFS is always direct,
+synchronous, and never blocks.
+
+The data organization in PRAMFS can be thought of as an extremely
+simplified version of ext2, such that the ratio of data to meta-data is
+very high.
+
+PRAMFS is also write protected. The page table entries that map the
+backing-store RAM are normally marked read-only. Write operations into
+the filesystem temporarily mark the affected pages as writeable, the
+write operation is carried out with locks held, and then the pte is
+marked read-only again. This feature provides some protection against
+filesystem corruption caused by errant writes into the RAM due to
+kernel bugs for instance. In case there are systems where the write
+protection is not possible (for instance the RAM cannot be mapped
+with page tables), this feature can be disabled with the CONFIG_PRAMFS_NOWP
+config option.
+
+In summary, PRAMFS is a light-weight, full-featured, and space-efficient
+special filesystem that is ideal for systems with a block of fast
+non-volatile RAM that need to access data on it using a standard
+filesytem interface.
+
+
+Supported mount options
+=======================
+
+The PRAMFS currently requires one mount option, and there are several
+optional mount options:
+
+physaddr= Required. It tells PRAMFS the physical address of the
+ start of the RAM that makes up the filesystem. The
+ physical address must be located on a page boundary.
+
+init= Optional. It is used to initialize the memory to an
+ empty filesystem. Any data in an existing filesystem
+ will be lost if this option is given. The parameter to
+ "init=" is the RAM in kilo/mega/giga bytes.
+
+bs= Optional. It is used to specify a block size. It is
+ ignored if the "init=" option is not specified, since
+ otherwise the block size is read from the PRAMFS
+ super-block. The default blocksize is 2048 bytes,
+ and the allowed block sizes are 512, 1024, 2048, and
+ 4096.
+
+bpi= Optional. It is used to specify the bytes per inode
+ ratio, i.e. For every N bytes in the filesystem, an
+ inode will be created. This behaves the same as the "-i"
+ option to mke2fs. It is ignored if the "init=" option is
+ not specified.
+
+N= Optional. It is used to specify the number of inodes to
+ allocate in the inode table. If the option is not
+ specified, the bytes-per-inode ratio is used the
+ calculate the number of inodes. If neither the "N=" or
+ "bpi=" options are specified, the default behavior is to
+ reserve 5% of the total space in the filesystem for the
+ inode table. This option behaves the same as the "-N"
+ option to mke2fs. It is ignored if the "init=" option is
+ not specified.
+
+Examples:
+
+mount -t pramfs -o physaddr=0x20000000,init=1M,bs=1k none /mnt/pram
+
+This example locates the filesystem at physical address 0x20000000, and
+also requests an empty filesystem be initialized, of total size of one
+megabytes and blocksize of one kilobytes. The mount point is /mnt/pram.
+
+mount -t pramfs -o physaddr=0x20000000 none /mnt/pram
+
+This example locates the filesystem at physical address 0x20000000 as in
+the first example, but uses the intact filesystem that already exists.
+
+
+Current Limitations
+===================
+
+- The RAM used for PRAMFS must be directly addressable.
+
+- PRAMFS does not support hard links.
+
+- PRAMFS supports only private memory mappings. This allows most
+ executables to run, but programs that attempt shared memory
+ mappings, such as X apps that use X shared memory, will fail.
+
+Further Documentation
+=====================
+
+If you are interested in the internal design of PRAMFS, there is
+documentation available at the Sourceforge PRAMFS home page at
+http://pramfs.sourceforge.net.
+
+Please send bug reports/comments/feed back to the pramfs development
+list at sourceforge: pramfs-devel@lists.sourceforge.net.
+
+
+ChangeLog
+=========
+
+1.1.3:
+ - kernel 2.6.30
+ - replaced DQUOT macros with vfs_dq_* functions in inode.c
+
+1.1.2:
+ - kernel 2.6.29
+ - replaced current->fsuid and current->fsgid in inode.c with
+ current_fsuid() and current_fsgid() macro
+ - replaced pram_fsync with simple_file_sync (deleted fsync.c)
+ - removed ioctl.c
+ - fix the minus inside pram_sync_super and pram_sync_inode
+ inline functions
+ - now flags must be explicit in pram_lock/unlock_inode,
+ pram_lock/unlock_super and in pram_lock/unlock_block
+ - fix compiler warning about unused flags variable
+ - now multiple instances of pramfs are allowed
+ - added management of mode, uid and gid mount options
+ - renamed find_pramfs_super() in pram_get_super() and changed its
+ behaviour to remove the dependecy from a kernel symbol not exported
+ - added superblock operation pram_show_options
+ - added pram_parse_options function
+ - added checks for some mount parameters to avoid kernel crashes
+ - now a physical address of zero is allowed
+ - added the use of request_mem_region_exclusive
+ - now phys_addr in the struct pram_sb_info is phys_addr_t type
+
+1.1.1:
+ - kernel 2.6.28.1
+ - now the code is compliant to kernel coding style
+ - replaced typedef pram_off_t with the standard off_t
+
+1.1.0
+ - kernel 2.6.27
+ - added xip feature.
+
+1.0.4:
+ - kernel 2.6.10
+ - include <asm/tlbflush.h> in wprotect.c for
+ flush_tlb_kernel_range().
+ - fixed a bug in pram_mknod(). The pramfs inode needs
+ updating after calling init_special_inode() to update
+ the rdev.
+1.0.3:
+ - kernel 2.6.9.
+ - __ioremap() definition not consistent across archs, use
+ ioremap() instead.
+ - flush_tlb_kernel_page() is only available on some archs.
+ - fixed bug in pram_fill_super(): root inode pointer needs
+ to be recalculated after remapping whole fs.
+1.0.2:
+ - kernel 2.6.4.
+ - use pram_truncate() in pram_delete_inode().
+ - dangling pram_lock_inode() removed in pram_truncate_blocks().
+ - edits to this README
+
+1.0.1:
+ - port to kernel 2.6.3.
+ - implement direct_IO() method instead of custom file read/write
+ methods.
+ - do away with __ioremap_readonly() requirement.
+ - implement inode truncate() method.
+
+1.0.0:
+ - Started ChangeLog (kernel 2.4.22).
+
+


\
 
 \ /
  Last update: 2009-06-13 15:29    [W:0.176 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site