lkml.org 
[lkml]   [2009]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] Add nuvoton Ehci driver to usb tree
Dear sirs,

According Eric's advice,I changed my patch,

Would you like to give me some advice again?
---

Add ehci support for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
---
drivers/usb/Kconfig | 2 +
drivers/usb/host/Kconfig | 6 ++
drivers/usb/host/ehci-hcd.c | 5 +
drivers/usb/host/ehci-w90x900.c | 181 +++++++++++++++++++++++++++++++++++++++
4 files changed, 194 insertions(+), 0 deletions(-)
create mode 100644 drivers/usb/host/ehci-w90x900.c

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index c6c816b..6696abe 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -38,6 +38,7 @@ config USB_ARCH_HAS_OHCI
default y if ARCH_AT91
default y if ARCH_PNX4008 && I2C
default y if MFD_TC6393XB
+ default y if ARCH_W90X900
# PPC:
default y if STB03xxx
default y if PPC_MPC52xx
@@ -57,6 +58,7 @@ config USB_ARCH_HAS_EHCI
default y if PPC_83xx
default y if SOC_AU1200
default y if ARCH_IXP4XX
+ default y if ARCH_W90X900
default PCI

# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 845479f..dfbe586 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -93,6 +93,12 @@ config USB_EHCI_HCD_PPC_OF
Enables support for the USB controller present on the PowerPC
OpenFirmware platform bus.

+config USB_W90X900_EHCI
+ bool "W90X900(W90P910) EHCI support"
+ depends on USB_EHCI_HCD && ARCH_W90X900
+ ---help---
+ Enables support for the W90X900 USB controller
+
config USB_OXU210HP_HCD
tristate "OXU210HP HCD support"
depends on USB
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index c637207..bdb0372 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1072,6 +1072,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ixp4xx_ehci_driver
#endif

+#ifdef CONFIG_USB_W90X900_EHCI
+#include "ehci-w90x900.c"
+#define PLATFORM_DRIVER ehci_hcd_w90x900_driver
+#endif
+
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
#error "missing bus glue for ehci-hcd"
diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c
new file mode 100644
index 0000000..cfa21ea
--- /dev/null
+++ b/drivers/usb/host/ehci-w90x900.c
@@ -0,0 +1,181 @@
+/*
+ * linux/driver/usb/host/ehci-w90x900.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+
+/*ebable phy0 and phy1 for w90p910*/
+#define ENPHY (0x01<<8)
+#define PHY0_CTR (0xA4)
+#define PHY1_CTR (0xA8)
+
+static int __devinit usb_w90x900_probe(const struct hc_driver *driver,
+ struct platform_device *pdev)
+{
+ struct usb_hcd *hcd;
+ struct ehci_hcd *ehci;
+ struct resource *res;
+ int retval = 0, irq;
+ unsigned long val;
+
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ retval = -ENXIO;
+ goto err1;
+ }
+
+ hcd = usb_create_hcd(driver, &pdev->dev, "w90x900 EHCI");
+ if (!hcd) {
+ retval = -ENOMEM;
+ goto err1;
+ }
+
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = res->end - res->start + 1;
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+ retval = -EBUSY;
+ goto err2;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (hcd->regs == NULL) {
+ retval = -EFAULT;
+ goto err3;
+ }
+
+ ehci = hcd_to_ehci(hcd);
+ ehci->caps = hcd->regs;
+ ehci->regs = hcd->regs +
+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+
+ /* enable PHY 0,1,the regs only apply to w90p910
+ * 0xA4,0xA8 were offsets of PHY0 and PHY1 controller of
+ * w90p910 IC relative to ehci->regs.
+ */
+ val = __raw_readl(ehci->regs+PHY0_CTR);
+ val |= ENPHY;
+ __raw_writel(val, ehci->regs+PHY0_CTR);
+
+ val = __raw_readl(ehci->regs+PHY1_CTR);
+ val |= ENPHY;
+ __raw_writel(val, ehci->regs+PHY1_CTR);
+
+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+ ehci->sbrn = 0x20;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ goto err4;
+
+ retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (retval != 0)
+ goto err4;
+
+ ehci_writel(ehci, 1, &ehci->regs->configured_flag);
+
+ return retval;
+err4:
+ iounmap(hcd->regs);
+err3:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err2:
+ usb_put_hcd(hcd);
+err1:
+ return retval;
+}
+
+static
+void usb_w90x900_remove(struct usb_hcd *hcd, struct platform_device *pdev)
+{
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+}
+
+static const struct hc_driver ehci_w90x900_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "Nuvoton w90x900 EHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ehci_irq,
+ .flags = HCD_USB2|HCD_MEMORY,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = ehci_init,
+ .start = ehci_run,
+
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ehci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+#ifdef CONFIG_PM
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+#endif
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+};
+
+static int __devinit ehci_w90x900_probe(struct platform_device *pdev)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ return usb_w90x900_probe(&ehci_w90x900_hc_driver, pdev);
+}
+
+static int __devexit ehci_w90x900_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+ usb_w90x900_remove(hcd, pdev);
+
+ return 0;
+}
+
+static struct platform_driver ehci_hcd_w90x900_driver = {
+ .probe = ehci_w90x900_probe,
+ .remove = __devexit_p(ehci_w90x900_remove),
+ .driver = {
+ .name = "w90x900-ehci",
+ .owner = THIS_MODULE,
+ },
+};
+
+MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("w90p910 usb ehci driver!");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:w90p910-ehci");
--
1.5.6.3


\
 
 \ /
  Last update: 2009-06-13 03:17    [W:0.025 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site