lkml.org 
[lkml]   [2009]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: [lm-sensors] [PATCH] hwmon: Add driver for VIA CPU core temperature
    Date
    Jean Delvare <khali <at> linux-fr.org> writes:
    >
    > > > On the other hand
    > > > cat '/sys/class/hwmon/hwmon2/device/driver/via-cputemp.0/temp1_input'
    outputs
    > > > numbers between 25-27.
    > > >
    >
    > Temperature values are supposed to be expressed in millidegrees C, not
    > degrees C as it seems to be doing (although 25 degrees C seems pretty
    > low for a CPU temperature?) The drivers needs to multiply values by
    > 1000 before exporting them to sysfs. Then "sensors" will report the
    > correct temperature value.
    >

    It goes up to 48 degrees C when I run cpuburnP6.

    Tomaz Mertelj




    \
     
     \ /
      Last update: 2009-06-12 11:13    [W:0.021 / U:1.912 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site